USING TIPS UNPACKING AND CHECKING EQUIPMENT CHARGING BATTERY PACK Charging Precaution Charging Operation Indicator light of charger will show charging condition INSTALLATION OF ACCESSORIES Installation of Battery Pack Antenna Installation Installing Belt Clip Installing External Micro/Speaker Getting Familiar Side key definition Icons and description Shortcut keys Menu setting Menu Function Description and Settings 1. SQL 02 03 05 05 06 06 07 07 08 09 10 11 13 15 16 17 19 19 2. POWER 3. VOX 4. Wide / Narrow band setting 5. Battery saving 6. Step frequency setting STEP 7. TOT 8. BEEP 9. ABR backlight switch 10. Reverse frequency REV 11. Talk around T / A 12. Tri-band stand by TDR 13. Transmit channel selection TX-F 14. RX CTCSS/DCS setting R-CDC (support non-standard CTCSS/DCS) 15. TX CDCSS/DCS setting T-CDC (support non-standard CTCSS/DCS) 16. DTMF settings 17. Scan mode settings SMODE 18. scan delete settings SCAN-ADD 19. PTTID (PTTID switch) settings 20. MDF / A (Band A display mode) 21. MDF / B (Band B display mode) 22. MDF / C (Band C display mode) 19 19 20 20 20 20 21 21 21 22 22 22 22 23 24 25 26 26 26 26 27 23. Keypad lock mode LOCK M 24. Boot display options OPNSET 25. Busy channel lock BCL 26. Shift direction selection setting S-D 27. offset setting DIFFR 28. End of emission ROGER 29. Scrambler function SCRM 30. Compandor COMP Specific Instructions TECHNICAL PARAMETERS Guarantee 27 27 28 28 28 28 29 29 31 32 PUSH PUSH MENU
MENU
4. Wide / Narrow band setting After pressing [ ] key, rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter W/N settings. 2. Rotate the channel knob to select WIDE/NARROW. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
5. Battery saving After pressing [ ] key, rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter SAVE settings. 2. Rotate the channel knob to select ON/OFF. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
6. Step frequency setting STEP After pressing [ ] , rotate the channel knob to select menu [ ] . 1. Press [ ] to enter STEP settings. 2. Rotate the channel knob to select step: 5, 6.25, 10, 12.5, 20, 25. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
7. TOT After pressing [ ] , rotate the channel knob to select menu [ ] . 1. Press [ ] to enter TOT setting.
2. Rotate the channel knob to select OFF/1-7. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
8. BEEP After pressing [ ] key, rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter BEEP setting. 2. Rotate the channel knob to select ON/OFF. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
9. ABR backlight switch After pressing [ ] key, rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter ABR settings. 2. Rotate the channel knob to select ON/OFF. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
10. Reverse frequency REV After pressing [ ] , rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter the REV setting. 2. Rotate the channel knob to select ON/OFF. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
20 21
2. Press [ ] key to select the group: (OFF /67HZ / D023N / D023I). 3. Rotate the channel knob to select the desired CTCSS/DCS. 4. Press [ ] to confirm. 5. Press the [ ] button to exit to the main menu.
15. TX CDCSS/DCS setting T-CDC (support non-standard CTCSS/DCS) After pressing [ ] , rotate the channel knob to select menu [ ] . 1. Press [ ] to enter T-CDC settings. 2. Press [ ] key to select the group: (OFF / 67HZ / D023N / D023I). 3. Rotate the channel knob to select the desired CTCSS/DCS. 4. Press [ ] to confirm. 5. Press the [ ] button to exit to the main menu.
11. Talk around T / A After pressing [ ] , rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter the T/A setting. 2. Rotate the channel knob to select ON/OFF. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
12. Tri-band stand by TDR After pressing [ ] , rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter TDR setting. 2. Rotate the channel knob to select ON/OFF. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
13. Transmit channel selection TX-F After pressing [ ] key, rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter TX-F settings. 2. Rotate the channel knob to select Auto/F1/F2/F3. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
14. RX CTCSS/DCS setting R-CDC (support non-standard CTCSS/DCS) After pressing [ ] , rotate the channel knob to select menu [ ] . 1. Press [ ] to enter R-CDC settings.
22 23
3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu. Note:
1) You can send the corresponding DTMF code by pressing the button during the transmission. 2) You can set in software, and turn on Menu 19 PTT ID to send DTMF code.
17. Scan mode settings SMODE After pressing [ ] , rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter SCAND setting. 2. Rotate the channel knob to select TO\CO\SE. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
25 16. DTMF settings After pressing [ ] , rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter DTMFST settings. 2. Rotate the channel knob to select ON/OFF. 24
25. Busy channel lock BCL After pressing [ ] key, rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter BCL setting. 2. Rotate the channel knob to select ON/OFF. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
26. Shift direction selection setting S-D After pressing [ ] , rotate the channel knob to select menu [ ] . 1. Press [ ] to enter S-D settings. 2. Rotate the channel knob to select o/+/-. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
27. offset setting DIFFR After pressing [ ] , rotate the channel knob to select menu [ ] . 1. Press [ ] to enter DIFFR settings. 2. Manually input offset. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
2. Rotate the channel knob to select ON/OFF. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
29. Scrambler function SCRM After pressing [ ] key, rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter the SCRM setting. 2. Rotate the channel knob to select ON/OFF. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
30. Compandor COMP After pressing [ ] key, rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter COMP settings. 2. Rotate the channel knob to select ON/OFF. 3. Press [ ] to confirm. 4. Press [ ] to exit to the main menu.
28. End of emission ROGER After pressing [ ] key, rotate the channel knob to select the menu [ ] . 1. Press [ ] to enter the ROGER setting.
28 29 Specific Instructions TECHNICAL PARAMETERS Guarantee Specific Instructions 1. Side key definition Open the programming software, select the side key function under the optional features, then select the function you want to implement from the drop-down menu of each option, and finally insert programming cable to write. 2. 1750Hz tone emission PTT+side key 1, then you can emit 1750Hz tone. 3. Channel Storage and Deleting In the VFO mode, long press Menu, the digits on the top right of the frequency blinks, rotate knob or up and down key to choose the numbers you want to store and then press Enter to confirm. In the CH or MR mode, long press Menu, the digits on the top right of the frequency blinks, rotate knob or up and down key to choose the channels you want to delete and then press Enter to confirm. 4. Reset Press PTT and Menu to power on, radio will show RESET VFO, rotate knob or up and down key to choose VFO or ALL. VFO: to reset the settings in the VFO model. ALL: to reset the settings in the all models. 31 General Frequency Channel Operating Voltage Operating Temperature Frequency Stability Dimension(Hxwxd Weight Antenna Impedence Mode of operation Transmitter Frequency Power Modulation Type Spurious Power Modulation Noise Modulation Distortion Frequency Stability Max Fr. Deviation Current Audio response(300-3400Hz) Adjacent Ch Power 32 R x:136-174MHz, 220-260MHz & 400-480MHz 128 7.4V DC
-10C ~ +50C 2.5ppm 116x53x36mm 106g(battery and antenna included)
Simplex or semi-duplex Tx:144-148MHz, 222-225MHz & 420-450MHz 5W FM
-15dB
< -40dB
< 5%
5ppm
5KHz
1600mA
+6.5 ~ -14dB
65dB Receiver Frequency Sensitivity Occupied Bandwidth Selectivity Intermediation Audio power Audio distortion Frequency Stability Current Audio response(300-3400Hz) R x:136-174MHz, 220-260MHz & 400-480MHz
16KHz
65dB
55dB
> 500mW
10%
5ppm standby: 60mA working: 250Ma
+7 ~ -12.5dB 33 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.