FCC ID: POD-TH9000DV Mobile Radio

User Manual TH-9000D P ro,TH-9000D P lus To customers Thank you very much for using two-way radios. This product has a newly developed function menu and humanism operation design, making it easy to use. It will meet your requirement by the compact size and reasonable price. TYT Electronics Co., Ltd. Thank you for choosing TYT mobile transceiver, TYT always provides high quality products, and this transceiver is no exception. As you learn how to use Precautions Please observe the following precautions to prevent fire, personal injury, or transceiver this transceiver, you will find that TYT is pursuing "user friendliness". For example, damage:

each time you change the menu no. in Menu mode, you will see a text message on the display lets you know what you are configuring. Though friendly design for user, this transceiver is technically complicated and some features may be new to you. Consider this manual to be a personal tutorial from the designers,allow the manual to guide you through the learning process now, then act as a reference in the coming years. Do not attempt to configure your transceiver while driving,it is dangerous. This transceiver is designed for a 13.8V DC power supply. Don't use a 24V battery to power on the transceiver. Do not place the transceiver in excessively dusty, humid or wet areas, nor unstable surfaces. Please keep it away from interferential devices (such as TV, generator etc.) Do not expose the transceiver to long periods of direct Please contact the local authorized dealer if you have any questions.We are sunlight nor place it close to heating appliances. not responsible for any typographical errors that may be in this manual. Standard If an abnormal odor or smoke is detected coming accessories may change without notice, getting your understanding for any from the transceiver, turn OFF the power immediately. TX P1 P2 P3 P4 P5 PWR DATA inconveniences. Contact local service station or your dealer. Do not transmit with high output power for extended periods; the transceiver may overheat. CONTENTS New and Innovative Features Supplied Accessories/Optional Accessories Supplied Accessories Optional Accessories Initial Installation Mobile Installation DC Power Cable Connection Power Supply Voltage Display Antenna Connection Accessories Connections Getting Acquainted Front panel Rear panel Display Microphone Display Mode Basic Operations Switching the Power On/Off Adjusting the Volume Channel mode Adjusting Channel Through Selector Knob Receiving Transmitting Transmitting Tone-Pulse Transmitting Optional Signaling Channel Edit Channel Delete Shortcut Operations Squelch Off Squelch Level Setup Frequency/Channel Scan Channel Scan CTCSS/DCS Encode and Decode Setup CTCSS Scan DCS Scan Voice Compander Offset Direction and Offset Frequency Setup Keypad Lockout 01 02-03 02 03 04-13 04-05 05-09 09-10 10-11 11-13 14-18 14-15 16 16-17 18 19-20 21-24 21 21 21 21-22 22 22-23 23 23 23 24 24-29 24 24 24-25 25 25-26 26 26 27 27-28 28 Current Voltage Enquiry Auto-Dialer Setup Transmitting Edited DTMF Tones in the Auto-dialer Memory General Setting Frequency Channel Step Setup DTMF, DTMF ANI, 2Tone or 5Tone Signaling Sending 2-Tone Call Sending 5-Tone Call Sending DTMF call Signaling Combination Setup Band-width Selection TX OFF Setup Busy Channel Lockout Editing Channel Name Reverse TX/RX Talk Around Voice Compander Scrambler Setup (Encryption) Radio's DTMF SELF ID ENQUIRY Radio's 5TONE SELF ID ENQUIRY 28 29 29 30-45 30 30-31 31-32 32 32-33 33-34 34 34-35 35-36 36 36 37 37 38 38 38 Voice Prompt TOT (Time-out timer) APO (Auto power off) DTMF Transmitting Time Squelch Level Setup Scan Stop Time Setup LCD Backlight Background Light Color Pilot Frequency Display Mode Setup Power on password Setup Address List Factory Default Microphone Operation Microphone Keypad lockout Sending DTMF By Keypad Function Setup By Microphone Keypad Switches between VFO and channel mode Short Calling Squelch Level Optional Signaling 39 39-40 40 40-41 41 41-42 42 42 42-43 43 44 44 45 46-52 46 46 47 47 47 47 47-48 Scan Skip Frequency/Channel Scan Busy Channel Lockout Reverse TX/RX TOT (Time-out timer) CTCSS/DCS Encode and Decode Talk Around Voice Prompt LCD Backlight Long-distance Anti-theft Alarm Cable Clone Programmin Software Installing and Starting (in windows XP system) Maintenance Default Setting after Resetting(VHF) Default Setting after Resetting(UHF) Trouble Shooting Specifications Attached Chart 50 groups CTCSS Tone Frequency(Hz) 1024 groups DCS Code 48 48 49 49-50 50 50-51 51 51-52 52 53-54 54-55 56-57 58-59 58 58 59 60-61 62-66 62 63-66 New and Innovative Features The mobile radio has nice housing, stoutness & stability, advanced and reliable functions, perfect & valuable. This mobile radio especially designs for drivers and company philosophy of innovation and practicality. More functions as follows:

it pursues Display on a large LCD with adjustable brightness, convenient for nighttime use. Distribute buttons reasonably, convenient for operation. Adopt superior quality material, better technology and high quality radiator to ensure stable and durable operation. 200 programmable memorized channels, identified by editing name. Programming different CTCSS, DCS, 2Tone, 5Tone in per channel, rejecting extra calling from other radios. Various scan functions including CTCSS/DCS Scan function. Using 5Tone to send Message, Emergency alarm, Call all, ANI, Remotely kill, Remotely Waken, etc. Automatic calling ldentification function by DTMF--ANI or 5Tone--ANI. Scramble function (Optional). Compander function for decrease the background noise and enhance audio clarity, it can set compander ON/OFF per channel. Different band width per channel, 25K for wide band, or 12.5K for narrow band. Theft alarm provides extra safety. 1024 groups of DCS code improves the abiliting of rejecting extra calling. 01 Supplied Accessories/Optional Accessories Optional Accessories Supplied Accessories After carefully unpacking the transceiver, identify the items listed in the table below. We suggest you keep the box and packaging. TX P1 P2 P3 P4 P5 PWR DATA TH-9000D Cloning Cable USB Programming Cable Cigar-Plug Connection Line

[CP-50]

[PC50]

[TCC-01]

TH-

9000DU radio body Microphone [THM-03]

Mobile Mounting DC Power Cable with Black screws

(with DTMF keyboard) Bracket [TMB-01]

Fuse Holder [TRL-01]

(M4X8mm) [TSS-01A]

Tapping screws

(M5X8mm) [TSS-01B]

S-Washer

[TSS-01D]

Spare Fuses User Manual Programming Software Regulated Power Supply

[TRP-01]

02 03 Alarm Cable A Alarm Cable B (Extension line)

[TMD-01]

[TL-01(A)]

Initial Installation Mobile installation To install the transceiver, select a safe, convenient location inside your vehicle that minimizes danger to your passengers and yourself while the vehicle is in motion. Consider installing the unit at an appropriate position so that knees or legs will not strike it during sudden braking of your vehicle. Try to pick a well ventilated location that is shielded from direct sunlight. 1. Install the mounting bracket in the vehicle using the supplied self-tapping screws (4pcs) and flat washers (4pcs), Car body Washer (M5) Tapping screw

(M5x20mm) Mounting bracket 2. Position the transceiver, then insert and tighten the supplied hexagon SEMS screws. Double check that all screws are tightened to prevent vehicle vibration from loosening the bracket or transceiver. TX P1 P2 P3 P4 P5 PWR DATA 04 Determine the appropriate angle of the transceiver, using the 3 screw hole positions on the side of the mounting bracket. DC Power Cable Connection NOTE: Locate the power input connector as close to the transceiver as possible. Mobile Operation The vehicle battery must have a nominal rating of 12V. Never connect the transceiver to a 24V battery. Be sure to use a 12V vehicle battery that has sufficient current capacity. If the current to the transceiver is insufficient, the display may darken during transmission, or transmitting output power may drop excessively. 1. Route the DC power cable supplied with the transceiver directly to the vehicle's battery terminals using the shortest path from the transceiver. We recommend you do not use the cigarette lighter socket as some cigarette lighter sockets introduce an unacceptable voltage drop. The entire length of the cable must be dressed so it is isolated from heat, moisture, and the engine secondary (high voltage) ignition system/ cables. 2. After installing cable, in order to avoid the risk of damp, please use heat-resistant tap to tie together with fuse box. Don't forget to reinforce whole cable. 05 3. In order to avoid the risk of short circuit, please cut down connection with negative (-) of optional (For Cigar-Plug connection) cable. Connect one of the cables between the ACC battery, then connect with radio. terminal or a Cigar-Plug that operates with the vehicle ignition or ACC switch on the vehicle 4. Confirm the correct polarity of the connections, then attach the power cable to the battery and EXT POWER jack on the rear side of the unit. terminals; red connects to the positive (+) terminal and black connects to the negative (-) NOTE: In many cars,the cigar-lighter plug is always powered. If this is the case, you cannot terminal. use it for the ignition key on/off function. Use the full length of the cable without cutting off excess even if the cable is longer than 7. When the ignition key is turned to ACC or ON(Start) position with the radio turned off, required. In particular, never remove the fuse holders from the cable. the power switch illuminates. The illumination will be turned off when the ignition key is 5. Reconnect any wiring removed from the negative terminal. turned to the off position. Red Black 6. Connect the DC power cable to the transceiver's power supply connector. Press the connectors firmly together until the locking tab clicks. If the ignition-key on/off feature is desired(optional feature),use the To turn on the unit, press the power switch manually while it is illuminated. (While ignition key is at ACC or ON position) 8. When the ignition key is turned to ACC or ON position with the radio's power switch on, the unit turns on automatically and the power switch will be lit. Turn the ignition key to OFF position or manually turn the power switch off to shut down the radio. 9. Using extra cable,power consumption:5MAH. 10.Without this function,user can turn on/off radio by Power knob. ACC terminal 06 Ext. Power jack DC power cable Ext. Power jack Cigar-Plug connection 07 Fixed Station Operation Ineed a separate 13.8V DC power supply (not included) , power supply as optional Replacing Fuses If the fuse blows, determine the cause, then correct the problem. After the problem is accessories. Please contact local dealer to require. resolved, replace the fuse. If newly installed fuses continue to blow, disconnect the power The recommended current capacity of your power supply is 12A. cable and contact your autho- rized TYT dealer or an authorized TYT servi-cecenter for 1. Connect the DC power cable to the regulated DC power supply and ensure that the assistance. polarities are correct. (Red: positive, Black: negative). Do not directly connect the transceiver to an AC outlet. Use the supplied DC power cable to connect the transceiver to a regulated power supply. Do not substitute a cable with smaller gauge wires. Regulated power supply 1 Red Black Regulated power supply 2 DC power cable with fuse holder Fuse Location Transceiver Supplied Accessory DC power cable Fuse Current Rating 15A 20A Only use fuses of the specified type and rating, otherwise the transceiver could be damaged. NOTE: If you use the transceiver for a long period when the vehicle battery is not fully charged, or when the engine is OFF, the battery may become discharged, and will not have sufficient reserves to start the vehicle. Avoid using the transceiver in these conditions. 2. Connect the transceiver's DC power connector to the connector on the DC power cable. Power supply voltage Display Press the connectors firmly together until the locking tab clicks. NOTE: Before connecting the DC power to the transceiver, be sure to switch the transceiver and the DC power supply OFF. Do not plug the DC power supply into an AC outlet until you make all connections. 08 After connecting the transceiver to the power supply, the supply voltage can be displayed on LCD by long pressing the key. P2 The display immediately changes as the voltage supply changes, It also displays voltage during transmission. 09 The transceiver will return to its normal operation when the power is switched ON or repeat above operation. Important: The range of displayed voltage is only from 7V to16V DC, because the displayed value is estimated, please use a voltmeter when a more precise reading is desired. Antenna Connection Before operating, install an efficient, well-tuned antenna. The success of your installation will depend largely on the type of antenna and its correct installation. The transceiver can give excellent results if the antenna system and its installation are given careful attention. Use a 50* impedance antenna and low-loss coaxial feed-line that has a characteristic impedance of 50 *, to match the transceiver input impedance. Coupling the antenna to the transceiver via feed-lines having an impedance other than 50*reduces the efficiency of the antenna system and can cause interference to nearby broadcast television receivers, radio receivers, and other electronic equipment. NOTE: Transmitting without first connecting an antenna or other matched load may damage the transceiver. Always connect the antenna to the transceiver before transmitting. All fixed stations should be equipped with a lightning arrester to reduce the risk of fire, electric shock, and transceiver damage. The possible locations of antenna on a car are shown as following:

10 Note:

To get the best range from the external whip antenna (50 ) should be used. Ant : Tx/ Rx 136-174&400-480Mhz , 0 dBi nominal (3dBi Max) Accessories Connections External Speaker If you plan to use an external speaker, choose a speaker with an impedance of 8*. The external speaker jack accepts a 3.5 mm(1/8") mono (2-conductor) plug. SP-01 NOTE: External speaker adopt double port BTL, please care about the connecting way. The speaker can not connect with the ground, otherwise the speaker will be fault. The wrong connecting way as the following picture. 11 Error SP-01 Ground PC Connecting To utilize the optional TH-9000D software, you must first connect the transceiver to your PC then using an optional programming cable PC50 (via Data socket ). Please use TH-9000D software for programming. NOTE: Ask your dealer about purchasing a Programming Cable PC50. Microphone For voice communications, connect a microphone equipped with an 8-pin modular plug into the modular socket on the front of the main unit. Press firmyly on the plug until the locking tab clicks. Attach the supplied microphone hanger in an appropriate location using the screws included in the screw set. Microphone [THM-03]

Antenna [TCA-01]

TH-9000D TX P1 P2 P3 P4 P5 PWR DATA Microphone connector External speaker [SP-01]

12 13 Getting Acquainted Front panel 3 11 4 5 6 1 2 Press key until icon appears then press the following key. NO. KEY FUNCTION Basic Functions 7 8 9 12 10 NO. KEY FUNCTION Pow(Power) VOL Main Dial F P1 P2 P3 P4 P5 Power on/Off Adjust Volume Key Change frequency, memory channel and scan direction etc. Function Key Call key Squelch off Switch VFO/MR mode Step key (step: 1MHZ) Set CTCSS/DCS 1 2 3 4 5 6 7 8 9 10 11 12 14 Data Terminal Data reading/writing, cloning and theft alarm functions 4 FUN/SET Press and hold for 2s to enter the Setting mode TX lights during Transmitting Mic.connector Microphone connection port Note:P1-P5 keys setting above are default. Users can modify then according to their need by program software. 15 4 5 6 7 8 F P1 P2 P3 P4 Confirms the selective functions and exit Voice compander Store memory channel Delete memory channal Keypad lock Press key and following key together to activate following function:

NO. KEY FUNCTION 5 6 7 8 9 P1 P2 P3 P4 P5 Data clone Power voltage display Scan mode Repeater offset set Auto dialer setting Functions that require continuous pressing following key to be activated NO. KEY FUNCTION Rear panel 1 2 3 NO. KEY FUNCTION 1 2 3 Ext. Power Jack Ext.Speaker Terminal Terminal for connecting optional cable for use with ignition key On/Off function. The radio will auto power on when car is driving. The radio will auto power off when car stops. Terminal for optional external speaker SP-01. Antenna Connector Connection for 50*antenna. DISPLAY 1 2 16 15 13 14 13 12 11 10 9 8 NO. KEY FUNCTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 SQL M Squelch level. In channel mode. Indicates the channel number in channel mode. Decimal point Channel skip. Decimal point Indicates the decimal point of frequency and the scanning function. Indicates the frequency or memory name. Signal is being received or monitor. Signal strength of receiving and transmitting. DCS A Compander. Keypad lock . Set DCS function. Set CTCSS function. Offset frequency direction. Scrambler. Auto power off. Pressing key. 16 3 4 5 6 7 17 Microphone 2 1 Display Mode 3 6 TH-9000D 4 5 7 NO. KEY FUNCTION UP DOWN PTT Increase frequency ,channel number or setting value. Decrease frequency, channel number or setting value. Press the PTT (Push-TO-Talk) key to transmit. Number Key Input VFO frequency or DTMF dial out etc. 1 2 3 4 5 6 7 MIC Speak here during transmission. MIC Connector Diagram(in the front view of connector) 8 Key Pad Serial Data 7 +5V 6 DOWN 5 UP 4 MIC GND 3 MIC 2 PTT 1 GND 1. Display Mode:

Except setting as "CH" mode, others considered as transceiver mode. Under this mode,press key to switch between Channel P3 mode and VFO mode . A. Frequency + Channel mode: When set display as"FR",it enters into Frequency+Channel mode, new setting of channel operation and shortcut operation can be temporarily used by

(Pic 1) user. Once the radio is turned off or switched to another channel, the temporary setting will be erased and back to initial settings.(As pic 1)

(Pic 2) B. Channel+Name Tag Mode: When set display as "NM",it enters into Channel +Name Tag mode. At this mode, it will display corresponding channel name when the current channel is edited with name. Otherwise, it will display frequency + channel. Its operations are the operation and Channel setting will be changed & stored as the latest value permanently.Once the radio is turned off or changed to new VFO frequency, the latest setting is remained until next

(Pic 3) change.(As pic 3) DTMF ON/ OFF Switches between DTMF dialing or function operating. same as frequency + channel mode.(As pic 2) LOCK Switch Locks out the UP DownNumerical keys and Function keys. C. VFO Mode(Frequency mode): This mode shows only frequency on the display. Shortcut 18 19 Basic Operations Switching The Power On/Off according to the option selected during installation Press the switch or turn the ignition key to ACC (speed up) or ON

(startup) position to power on radio . Press the keyfor 1s or turn the ignition key to OFF position to turn off. Adjusting The Volume Turn the VOL knob clockwise to increase the audio level, counterclockwise to decrease. PWR KEY Min Volume Max Volume NOTE: During communication, volume can be adjusted more accuratiy. Volume Knob Channel Mode In standby, press key or Microphone's key until P3 appear

, this indicates current channel in channel mode. Adjusting Channel Through Selector Knob 1. Under channel mode, you can change the current channel to the desired one through selector knob, clockwise turn to the forward channel, anticlockwise turn to the backward channel. 20 21 NOTE: 5k, 6.25k, 8.33K,10k, 12.5k, 20k, 25k, 30k and 50k total nine step size available for Please hold the microphone approximately 2.5-5.0cm from your lips, and then speak into this radio. Receiving When the channel you are operating is called, the screen shows and field intensity, in this way, you can hear the calling from transmitting party. the microphone in your normal speaking voice to get best timbre. NOTE:Press and hold [PTT] key, LED lights RED and power intensity showed in screen indicates it is transmitting, release to receive. Transmitting Tone-pulse Press and hold [PTT] key, then press Microphone transmit current selected DOWN NOTE: If the transceiver has set at higher squelch level, it may fail to hear the calling. tone-pulse signal. When the channel you are operating is called,the screen shows BUSY and field intensity, Transmitting Optional Signaling you can't hear the calling from transmitting party,it means current channel receives a Press and hold [PTT] key, then press Microphone key or press key in front UP P1 matching carrier but unmatching signaling(Refer to CTCSS/DCS encode and decode or panel or press Mic's key to transmit pre-stored and selected DTMF/2Tone/5Tone Optional Signaling setup). Transmitting Press key or press MIC's key to monitor for a while to confirm the P2 channel optional signaling. desired is not busy. Release or press Mic's key to return standby status,Then press P2 Channel Edit and hold [PTT] key to speak into microphone. 1. Press key to enter CTCSS/DCS signaling setup, turn P5 selector knob to select the desired signaling. key, LCD appears , Micon and current 2. Press channel number, Micon flashing means current channel is empty. 3. Turn selector knob to select the desired channel number to store. 4. Press key, , Micon and channel number disappears and emit a prompt voice, P3 thus the channel storage succeed. 22 23 Channel Delete 1. Under channel mode, turn selector knob to select channel which you want to delete. key and key together, current channel will be deleted and emitted P4 2. Press and emitted a prompt voice. Micon flashing means current channel is deleted. Shortcut Operations Squelch Off 1. In VFO mode,presst for 1s to enter into frequency scan. P3 2. Turn selector knob or press Microphone [ / ]

UP DOWN key tochange scan direction. 3. Press any key except and key to exit. Channel Scan In channel mode, this function is designed to monitor signal in every channel. key programmed as Squelch Off to monitor the weak signal. P2 1. In channel mode,Press key for 1s to enter into channel scan P3 1. Squelch Off: Press key to disable squelch ,press key again to resume squelch. P2 P2 Squelch level Setup 2. Turn selector knob or press Microphone [ / ]

UP DOWN key to change scan direction. Setting the radio to a tight squelch level,you can avoid unwanted signals or noise,but 3. Press any key except and key to exit. you may not receive a weak signal. Therefore,it will be better for you to select the normal squelch level. CTCSS/DCS Encode and Decode Setup 1. While standby, press P2 key and turn selector knob at the same time until Repeatedly press key to check whether set CTCSS/DCS encode and decode P5 LCD appears and current squelch level in current channel or not. 2. Turn selector knob or press MIC [ / ] key to set desired squelch level. UP DOWN 1. When LCD appears iron, it means current channel with 3. Press any key except and key to exit . Frequency/Channel Scan Frequency Scan In frequency (VFO) mode, this function is designed to monitor signal of every communicative frequency point of transceiver "step size" you have set. CTCSS encode, turn selector knob or press Microphone's

[ / ] key to select desired CTCSS encode. UP DOWN 2. When LCD appears and iron, it means current channel with CTCSS encode and decode, turn selector knob or press Microphone's [ / ] to select desired CTCSS code. UP DOWN 3. When LCD appears DCS iron, it means current channe can be set with DCS encode and decode together, turn selector 24 25 knob or press Microphone's [ / ] to select desired DCS encode and decode. UP DOWN 4. CTCSS:62.5-254.1, Total 51groups; DCS:000N-777I total 1024 groups. N is positive code, Voice Compander Compander function will decrease the background noise and enhance 15 audio clarity, is inverse code. especially in long range communication. 5. Press any key except , and keys to return into standby status. P5 1. Press key, then press P2 key to NOTE: Under channel mode,this operation can be temporarily used by user. Once the radio turn on compander function, repeat is turned off or switched to another channel,the temporary setting will be erased. above operation again to turn off compander function. CTCSS Scan Repeatedly press P5 key until LCD displays and icons, Press key on microphone the press key to enter 2. When LCD appears iron, enable compander in current channel. 3. When LCD doesn't display iron, disable compander in current channel. into CTCSS scanning.Once finding a matching CTCSS signaling, it will stop for 15s then Offset Direction and offset frequency setup scan again. DCS Scan Repeatedly press key until LCD displays DCS icons , P5 Press key on microphone the press key 1S to enter into DCS scanning. Once finding a matching DCS signaling ,it will stop for 15s then scan again. Repeater receives a signal(UP-LINK) on one frequency and re- transmits on another frequency(DOWN-LINK). The difference between these two frequencies is called the offset frequency. If the UP-LINK frequency higher than DOWN-LINK frequency, the direction is positive, If it is lower, the shift direction is negative. 1. Press key until the icon displays on the LCD, then press key, LCD P4 displays offset direction and offset frequency. 2. Repeatedly press key to select positive offset and negative offset. P4 3. When LCD displays " " icon, it indicates positive offset, which means transmitting frequency higher than receiving frequency. 4. When LCD displays " " icon, it indicates negative offset, which means transmitting frequency lower than receiving frequency. 26 27 5. Turn selector knob or Mic's [ / ] key to change offset frequency, offset DOWN UP Auto-Dialer Setup frequency changed as per stepping. 6. Press any key except and key to exit into standby. P2 This will automatically transmit pre-programmed and stored DTMF tones. And they are often used to remote control electronic devices or AUTOPATCH phone systems available NOTE: Under channel mode,this operation can be temporarily used by user. on some repeater. Once the radio is turned off or switched to another channel,the temporary setting will be 1. Press and hold key to enter the auto-dialer enquiry mode, LCD displays current P5 erased. Keypad Lockout default data and current group displayed on left. If no data in current group,it shows"EMPTY". 2. Turn selector knob to choose group you desired. Total:16 Avoiding unintentional operation, this function will lock main keys, all keys except P2 group,01-16. and key are invalid. 1. Press key until the icon displays on the LCD, then press key until LCD displays icon, it indicates P5 keypad lockout function is valid. 3. Press key to enter into editing of current group,press P5 MIC's numeric keys to set your desired data. 4. The display scrolls when the 7th digit is entered. The numbers 0-9, --, A-D, * and # can be stored up to a total of 23 digits. 2. Repeat above operation, icon disappears, it indicates keypad lockout function is 5. After editing,press PTT or key to send current group and P1 invalid. Current Voltage Enquiry This function will display Current Battery Voltage. store edited DTMF signaling. Transmitting Edited DTMF tones in the Auto-dialer memory 1. Press and hold key to enter into auto-dialer enquiry P5 1. Press and hold key, then press key, LCD displays P2 2. Turn selector knob to select desired transmitting group current battery voltage. 2. Repeat above operation to return into VFO or Channel mode NOTE: In voltage display mode, all functions and channel or frequency selection are invalid. 3. Press PTT then or key to transmit current selected DTMF tones. UP P1 28 29 General Setting 1. Press and hold key for over 2s to enter into general 1. Press and hold key for over 2s to enter general setting menu. setting menu. 2. Press or to select the desired function option. P1 P2 3. Turn selector knob to select the desired setup. 4. Press to confirm and exit. P5 NOTE: In Profession transceiver mode,the functions from No.1 to No.17 will be auto-hidden. Frequency Channel Step Setup Only in frequency (VFO) mode, this function is valid. Turn selector knob to select frequency or frequency scanning which is restricted by frequency step size. 1. Press and hold key for over 2s to enter general setting menu. 2. Press / key to choose No.01 menu, LCD displays "STP--125"

P2 P1 3. Turn selector knob to select the desired frequency channel step. Channel step: 5K, 6.25K,8.33K,10K,12.5K,20K,25K,30K and 50K, total 9 kinds. 4. Press key to confirm and exit P5 NOTE: This function is auto-hidden in channel mode. DTMF, DTMF ANI, 2Tone or 5Tone Signaling DTMF/5Tone/2Tone signalling function as similarily as CTCSS/DCS. Without receiving correspondent tone signalling, the speaker will remain mute. DTMF and 5Tone signalling can be applied for other advanced features such as ANI, PTT ID, group call, remotely stun, remotely kill, waken,...etc. The signalling edition must be done through programming software. Please refer to it in the programming software to know how to operate these features. 30 2.Press / to choose No 2 menu,LCD displays"T-OFF" . P2 P1 3. Turn selector knob to select the desired setup.

"DTMF'': the channel will be mute by a DTMF signal. The speaker won't be open until receiving a correspondent DTMF signal. Hold "PTT" then press or press UP P1 directly to transmit the pre-stored DTMF signaling.

"2TONE": the channel will be mute by a 2-Tone signal. The speaker won't be open until receiving a correspondent 2-Tone signal.Hold "PTT" then press or press directly to UP P1 transmit the pre- stored 2-Tone signaling.

"5Tone": the channel will be mute by a 5-Tone signal. The Speaker won't be open until receiving a correspondent 5-Tone signal. hold "PTT"then then press directly to transmit the pre-stored 5-Tone signaling. UP P1 Sending 2-Tone Call 1. Press and hold key for over 2s to enter general setting menu. 2.Press P1

P2 key to choose No.03 menu, LCD displays

"2TON XX","XX"indicates the group in the list. 3. Turn selector knob to select the desired sending 2TONE group, Press PTT to transmit selected group. 4. Total:32groups,00-31,Default:00. 31 5. Press kdy to confirm and exit. P5 4. Total:16groups,00-16,Default:00. NOTE: Content and name of 2TONE will be edited by programming software. 5. Press key to confirm and exit. P5 This radio only query edited group or name.If there is corresponding name for 2TONE,this Signaling Combination setup operation will display 2TONE corresponding name. Sending 5-Tone Call This function is to improve the level of protecting the radio against receiving irrelative signal. 1. Press and hold key for over 2s to enter general setting 1. Press and hold key for over 2s to enter general setting menu menu. 2.Press / key to chooseNo.04 menu, LCD displays P2 P1 2. Press P1

/ key to choose No.06 menu, LCD displays P2

"5TON XX","XX"indicates the group in the list.

"SPK--SQ". 3. Turn selector knob to select the desired sending 5TONE 3. Turn selector knob to select the desired combination group,Press PTT to transmit selected group. 4. Total:100groups,00-99,Default:00. 5. Press key to confirm and exit. P5 If select "SQ",it indicates you can hear the calling from caller when receive a matching carrier. If LCD displays "CTC",it indicates you can hear the calling from caller when receive a matching carrier and CTCSS/DCS signaling . NOTE: Content and name of 5TONE will be software.This radio only query edited group or If LCD displays "TON",it indicates you can hear the calling from name.If there is corresponding name for 5TONE,this operation will display 5TONEcorresponding caller when receive a matching carrier and DTMF/2TONE/5TONE name. Sending DTMF call 1. Press and hold key for over 2s to enter general setting menu. 2.Press / key to choose No.05 menu, LCD P2 P1 displays "DTMF XX","XX"indicates the group in the list. 3. Turn selector knob to select the desired sending DTMF group, Press PTT to transmit selected group. 32 signaling . If LCD displays "C*T",it indicates you can hear the calling from caller when receive a matching carrier and CTCSS/DCS and DTMF/2TONE/5TONE signaling . If LCD displays "C/T",it indicates you can hear the calling from caller when receive a matching carrier and either CTCSS/DCS DTMF/2TONE/5TONE signaling. 4. Press P5 key to confirm and exit. 33 NOTE: This setting will be set together with adding optional signaling and CTCSS/DCS. Disable this function,it is invalid to press PTT,current channel Band-width Selection Select suitable bandwidth in accordance with different local conditions. 1. Press and hold key for over 2s to enter general setting menu. only works in RX mode. 1. Press and hold key for over 2s to enter general setting menu. 2. Press / key to choose No.09 menu, LCD displays P2 P1 2. Press P1

P2 key to choose No.08 menu, LCD displays

"TX-ON".

"BAND--25". 3. Turn selector knob to select the desired setting. 25: band width is 25k(Wide band) 12:band width is 12.5k(Narrow band) 4. Press key to confirm and exit. P5 5. Default:25(Wide Band). TX OFF SETUP 3. Turn selector knob to select the desired setting . On:In current channel,Press PTT to transmit OFF:In current channel,Press PTT is invalid. 4. Press key to confirm and exit. Default: ON. P5 Busy Channel Lockout BCLO is to disable transmitting while RX signal is received. Once the channel is busy and you press PTT, the radio will beep as warning and get back to receiving. 1. Press and hold key for over 2s to enter general setting menu 2. Press P1

P2 key to choose No.10 menu, LCD displays

"LOCK--OFF". 3. Turn selector knob to select the desired setting. BU: Enable BCLO, Carrier lockout, transmitting is inhibited when current channel receives a matching carrier;press [PTT] to emit error voice prompt and back to receiving status. RL: Enable BTLO, transmitting is inhibited when current channel receives a matching carrier 34 35 but dis-matching CTCSS/DCS.press [PTT] to emit error voice prompt and back to receiving Talk Around status. By Talk Around function,you can directly communicate with other radios in your group OFF: Busy channel lockout is disabled.It can transmit in any receiving status. in case the repeater is not activated or when you are out of the repeater range. The transceiver 4. Press kdy to confirm and exit. P5 Editing Channel NAME 1. Press and hold key for over 2s to enter general setting menu. 2. Press P1

P2 key to choose No.11 menu, LCD displays cursor and flashing. will transmit by RX frequency with its CTCSS/DCS signaling. 1. Press and hold key for over 2s to enter general setting menu. 2. Press P1

P2 key to choose No.13 menu, LCD displays

"TALK--OF". 3. Turn selector knob to select the desired letter,press key to P5 3. Turn selector knob to select the desired setting. confirm selected letter and enter into next edition,Press to return forward edition. P3 4. After edition,press key to exit. P4 ON:Enable Talk Around OFF:Disable Talk Around NOTE: In Frequency (VFO) mode ,this function will be auto-hidden. 4. After edition,press key to exit. P5 Reverse TX/RX Voice Compander TX frequency turns to RX frequency & RX frequency changes to TX frequency. The Enable this function to reduce background noise and enhance audio clarity, especially signaling will also be reversed if CTCSS/DCS signaling exited in this channel. in long range communication. 1. Press and hold key for over 2s to enter general setting menu 1. Press and hold key for over 2s to enter general setting menu 2. Press P1

P2 key to choose No.12 menu, LCD displays "REV--OF". 11. Press P1

P2 key to choose No.14 menu, LCD displays "COMP--OFF". 3. Turn selector knob to select the desired setting. 3. Turn selector knob to select the desired setting. ON:Enable Frequency Reverse OFF:Disable Frequency Reverse. 4. After edition,press key to exit. P5 36 ON:Enable compander OFF:Disable compander 4. Press key to confirm and exit. Default: OFF P5 37 8 Groups of Scrambler (Encryption) Voice Prompt An analog voice inversion scrambler can be equipped as optionals.This special audio process The prompting tone provides confirmation of entry, error status or malfunctions of the can offer a more confidential communication.Other radios at same frequency will receive transceiver. You can enable or disable this function. only disordered noises. 1. Press and hold key for over 2s to enter general setting 1. Press and hold key for over 2s to enter general setting menu. menu. 2. Press P1

/ key to choose No.15 menu, LCD displays "SCR--OF". P2 2. Press P1

P2 key to choose No.18 menu, LCD displays 3. Turn selector knob to select the desired group, 8 groups in total and you can set your desired value as well. 4. Press key to confirm and exit. Default: OFF P5 Radio's DTMF SELF ID ENQUIRY 1. Press and hold key for over 2s to enter general setting menu. 2. Press P1

P2 key to choose No.16 menu, LCD displays

"D--XXX" XXX is radio's DTMF SELF ID. 3. Press key to confirm and exit. P5 Radio's 5TONE SELF ID ENQUIRY 1. Press and hold key for over 2s to enter general setting menu. 2. Press P1

P2 key to choose No.17 menu, LCD displays

"F--XXXXX","XXXXX" is radio's 5TONE SELF ID. 3. Press key to confirm and exit. P5

"BEEP--ON". 3. Turn selector knob to select the desired setting. ON:Enable voice prompt OFF:Disable voice prompt 4. Press key to confirm and exit.Default:ON. P5 NOTE: Suggestion:Enable this function to check incorrect operation and malfunctions. TOT (Time-out timer) The time-out timer limits the amount of transmitting time. When you reach the time limit which has been programmed by your dealer, your transmission will be cut off. In order to transmit again, you must release PTT button to reset the timer. 1. Press and hold key for over 2s to enter general setting menu. 2. Press P1

P2 key to choose No.19 menu, LCD displays"TOT--3"

3. Turn selector knob to select the desired setting. Timer:1-30min,each level 1min 38 39 OFF:Disable TOT 4. Press key to confirm and exit. Default:3. P5 APO (Auto power off) 4. Press key to confirm and exit.Default:50MS. P5 Squelch level Setup Setting the radio to a tight squelch level, you can avoid unwanted signals or noise, but you Once APO is activated, the radio will be automatically switched off when the pre-set timer may not receive a weak signal. Therefore, it will be better for you to select the normal is running to end. squelch level 1. Press and hold key for over 2s to enter general setting menu. 1. Press and hold key for over 2s to enter general setting menu. 2. Press P1

P2 key to choose No.20 menu, LCD 2. Press P1

P2 key to choose No.22 menu, LCD displays displays"APO--OFF". 3. Turn selector knob to select the desired setting. 30MIN:Auto power off after 30m 1HOUR:Auto power off after 1h 2HOUR:Auto power off after 2h OFF:Disable Auto power off 4. Press key to confirm and exit.Default:OFF P5 DTMF Transmitting Time

"SQL--04". 3. Turn selector knob to select the desired squelch level. OF-20 total 21,OF is min setting value(ON) 4. Press P5 key to confirm and exit.Default:04 NOTE: Press ,then turn selector knob also can select the desired squelch level. If the P2 transceiver has set at higher squelch level,it may fail to hear the calling.If set at lower squelch level,the radio will be interfered. Scan Stop Time Setup 1. Press and hold key for over 2s to enter general setting. There are 3 kinds of Scan Dwell Time for option. 2. Press P1

P2 key to choose No.21 menu, LCD displays 1. Press and hold key for over 2s to enter general setting menu.

"SPD--50". 2. Press P1

P2 key to choose No.23 menu, LCD displays 3. Turn selector knob to select the desired setting.

"SCAN--TO". 30/50/100/200/300/500, which indicates the time for sending each DTMF signal & the 3. Turn selector knob to select the desired Scan Dwell Time. interval between each DTMF being sent. TO:it pauses 15s once scanning a matching signal,then resume scan. 40 41 CO:it pauses once scanning a matching signal,signal disappeared 2. Press P1

P2 key to choose No.26 menu, LCD then resume scan. SE:It stops once scanning a matching signal. 4. Press key to confirm the selection and exit.Default:TO. P5 LCD Backlight 1. Press and hold key for over 2s to enter general setting menu. 2. Press P1

P2 key to choose No.24 menu, LCD displays

"LAMP--25"

3. Turn selector knob to select the desired LCD backlight brightness1-32 total 32 level backlight brightness. displays"TB--1750". 3. Turn selector knob to select the desired pilot frequency. 1750HZ:Pilot frequency1750HZ 2100HZ:Pilot frequency 2100HZ 1000HZ:Pilot frequency 1000HZ 1450HZ:Pilot frequency 1450HZ 4. Press key to confirm the selection and exit. P5 Default: 1750HZ Display Mode Setup 4. Press key to confirm and exit.Default:25. P5 There are 3 different dispaly modes: Frequency+Channel mode,& Channel mode&Channe Background Light Color 1. 1. Press and hold key for over 2s to enter general setting menu. 2. Press P1

P2 key to choose No.25 menu, LCD displays

"COLOR--1"

3. Turn selector knob to select the desired light color, total 3 color for choice. 4. Press key to confirm and exit.Default:1. P5 Pilot Frequency This function uses to start repeater .It needs a certain intensity Pilot Frequency to start dormant repeater.As usual,no need to send pilot frequency again once repeater started. 1. Press and hold key for over 2s to enter general setting. l+Name Tag mode, . 1. Press and hold key for over 2s to enter general setting menu. 2. Press P1

P2 key to choose No.27 menu, LCD displays"DSP-- FR". 3. Turn selector knob to select the desired mode. FR:Frequency+Channel mode CH:Channel mode NM:Channel+Name Tag mode ,if channel not named, it displays Frequency+Channel mode. 4. Press key to confirm and exit. P5 NOTE: This function will be auto-hidden if channel mode locked. 42 43 Power On Password Setup Factory Default Enable this function,you have to insert a matching PIN to enter into normal status when If your radio seems to be malfunctioning, resetting the microprocessor may solve the radio is turned on. problem. When performing the reset, you may lose memory data and stored information. 1. Press and hold key for over 2s to enter general setting Back up or write down important data before performing the reset. menu. 1. Press and hold key for over 2s to enter general setting menu. 2. Press P1

P2 key to choose No.28 menu, LCD displays 2. Press P1

P2 key to choose No.30 menu, LCD

"CODE-OF". displays"RESTORE". 3. Turn selector knob to enable/disable password setup. 3. Turn selector knob to select the desired operation. ON: Turn on Pin setup OFF:Turn off Pin setup FACT:Resume factory default for channel,signaling and general setting. 4. Press key to confirm and exit.Default:OFF P5 SETUP:Return initial setup for No.18- No 28 general setting Address list menu. You store desired ID and corresponding ID name in address list.The LCD displays ID 4. Press key to confirm. P4 corresponding name if radio received ANI calling and find matching ID in address list. 1. Press and hold key for over 2s to enter general setting menu. 2. Press P1

P2 key to choose No.29 menu, LCD displays

"BOOK". 3. Turn selector knob to select the desired group [00-127], total is 128 group ID. 4. Press key to confirm and exit. 44 45 Microphone Operation UP DOWN PTT Lock Numeric Keys DTMF ON/OFF Speaker TH-9000 DU Function Setup By Microphone Keypad squelch off :In standby, press key, the squelch is disabled when icon , flashed in LCD,Press again to enable squelch and the icon disappears. Switches between VFO and channel mode In standby,press key to switch between channel mode and Frequency mode (VFO). Short Calling In standby,press to transmit the selected DTMF/2TONE/5TONE in current channel. Transmitting DTMF Code:In standby,press ,LCD displays DTMF data and group. Press [

UP DOWN

] key to select the desired transmitting DTMF group,then Press PTT to transmit. You can operate the transceiver by keypad or input desired frequency or channel through the microphone (Note:In professional transceiver mode,other keys are invalid except PTT, If no DTMF data in current group,LCD displays "EMPTY",press key again and input desired DTMF code by keypad,press PTT to transmit and store DTMF data.

UP

/ ], and ). DOWN Keypad Lock Pull down the slide switch to lock position,The lamp is turned off and all of keypads is not work except PTT switch. Transmitting DTMF By Microphone Keypad Slide DTMF key to DTMF position, press and hold the [PTT] key, transmitting the desired DTMF signaling by the numeric key directly. (Note:Slide DTMF key to DTMF position,the keyboard is invalid in standby ). 46 Squelch Level 1. In standby,press ,then press ,LCD displays "SQL" and current squelch level. 2. Press / to adjust the desired squelch level.(press ,then press , UP DOWN turn selector knob also can adjust the desired squelch level. 3. Press number key to confirm and exit. Optional signaling In standby,press ,then press to add optional signaling, repeat above operation to set DTMF,2TONE or 5TONE signaling. 47 When first bit of Exa byte in frequency displays "D",it indicates Busy Channel Lockout DTMF function enable. When first bit of Exa byte in frequency displays "T",it indicates 2Tone function enable. When first bit of Exa byte in frequency displays " ",it indicates 5Tone function enable. BCLO is to disable transmitting while RX signal is received. Once the channel is busy and you press PTT, the radio will beep as warning and get back to receiving. 1. In standby,press ,then press to enter into Busy Channel Lockout. 2. Press [

UP DOWN

/ ] to select the desired value. BU: Enable BCLO, Carrier lockout, transmitting is inhibited when current channel receives This function can be temporarily used in channel mode. Once the radio is turned off or a matching carrier;press [PTT] to emit error voice prompt. switched to another channel, the temporary setting will be erased and back to initial settings. RL: Enable BTLO, transmitting is inhibited when current channel Scan Skip receives a matching carrier but dis-matching CTCSS/DCS.press [PTT] to emit error voice In Channel mode,press then press ,decimal point displayed between frequency's prompt It can transmit in any receiving status. ten digit and unit digit,it means current channel is scan skip. Repeat above operation to set OFF: Busy channel lockout is disabled. scan or scan skip in currentchannel. 3. Press number keys to confirm and exit. 1. decimal point displayed between frequency's ten digit and unit digit,it means current NOTE: This function can be temporarily used in Channel mode . Once the radio is turned channel is scanned skip. off or switched to another channel, the temporary setting will be erased and back to initial 2. decimal point is not displayed between frequency's ten digit and unit digit,it means current settings. channel is scanned. Frequency/Channel scan Reverse TX/RX TX frequency turns to RX frequency & RX frequency changes In corresponding mode,press then press key to enter into scanning. to TX frequency. The signaling will also be reversed if CTCSS/DCS In scanning mode,press UP DOWN

/ to change scan direction. signaling exited in this channel. 1. In standby,press

,then press ,LCD displays "REV--OF". 2. Press [

UP DOWN

] to select the desired value. 48 49 ON:Enable Frequency Reverse OFF:Disable Frequency Reverse 3. Press number keys to confirm and exit. 4. Press

* or to confirm and exit. P3 NOTE:This function can be temporarily used in Channel mode. Once the radio is turned off or switched to another channel, the temporary setting will be erased and back to initial NOTE: This function can be temporarily used in Channel mode . Once the radio is turned off or switched to another channel, the temporary setting will be erased and back to initial settings. Talk Around settings. TOT (Time-out timer) By Talk Around function,you can directly communicate with other radios in your group in case the repeater is not activated or when you are out of the repeater range. The transceiver The time-out timer limits the amount of transmitting time. When you reach the time limit will transmit by RX frequency with its CTCSS/DCS signaling. which has been programmed by your dealer, your transmission will be cut off. In order to 1. In standby,press

,then press key,LCD displays "TALK--OF". transmit again, you must release PTT button to reset the timer. 2. Press [

UP

DOWN

] to select the desired setting . 1. In standby,press

,then press LCD displays "TOT-X". 2. Press [

UP DOWN

] to select the desired value. 3. Press number keys to confirm and exit. CTCSS/DCS Encode and Decode ON:Enable Talk Around OFF:Disable Talk Around 3. Press number keys to confirm and exit. NOTE: This function can be temporarily used in Channel mode . Once the radio is turned 1. In standby,press ,then press to enter into CTCSS/DCS Encode and Decode. off or switched to another channel, the temporary setting will be erased and back to initial 2. Repeat above operation to set as below:

LCD displays T icon,it indicates CTCSS encode set in current channel. settings. Voice Prompt LCD displays T and SQ icon,it indicates CTCSS encode and decode set in current channel. The prompting tone provides confirmation of entry, error status or malfunctions of the LCD displays DCS icon,it indicates DCS encode and decode set in current channel. transceiver. You can enable or disable this function. 3. In corresponding icon,press [

UP DOWN

] to select the desired CTCSS/DCS encode 1. In standby,press

,then press ,LCD displays "BEEP--XX". and decode. 50 2. Press [

UP DOWN

] to turn on/off BEEP voice prompt. 51 BEEP--OF :turn off voice prompt BEEP--ON :turn on voice prompt 3. Press number key to exit and store. LCD Backlight 1. In standby status,press

, then press LCD displays"LAMP- XX" . Long-distance Anti-theft Alarm This function is mainly use for simple anti-theft alarm device in vehicles. When the transceiver be removed in an improper manner,the transceiver will emit and transmit alarming and background voice to system and other transceiver of the same frequency. 2. Press [

UP DOWN

] to select desired backlight brightness(1-32 levels). 3. Press number keys to confirm and exit. 52 DC power cabcle Alarm cable Steering-wheel etc. Battery TX P1 P2 P3 P4 P5 PWR DATA Alarm cable Connect DC power cable with car battery. 1. Connect the optional alarm cable to the data jack on the front panel as shown. Secure the other end of the cable to an object that stays fixed in vehicle.(Note: if alarm cable is not enough long, you can choose optional alarm cable to extend). 2. When transceiver power off by press key ,the long-distance anti-theft alarm enable. 3. Note:The long-distance anti-theft alarm only available when transceiver power off . 53 4. When the alarm cable or is removed from the DATA jack or cut by improper sequence, the 3. Press master unit's [PTT] key, LCD displays "SD XXX", "XXX" indicates data volume in alarm function enable and will alarm as programmed. In alarming,the transceiver will stop transmitting. Slave unit displays "LD XXX", "XXX" indicates received data volume. When alarm once receiving a matching signal. And alarm again when a matching signal disappeared. the transmission is successfully finished, the master and slave unit both display "PASS". 5. Restart radio to cancel anti-theft alarming.Reconnect with alarm cable and turn off radio, Turn off the power, disconnect the cable and repeat step 2 to step 3 operations to clone the system will return to alarm mode. Cable Clone This feature will copy the programmed data and parameters in the master unit to slave units. It copies the parameters and memory program settings. 1. Use optional cloning cable, connect the cable between the data jacks on both master and slave. 2. Press and hold key, then press P1 key to enter into cloning mode, LCD displays

"CLONE". Master/Slave stereo plug,3.5mm plug GND DATA TX/RX 3.5mm stereo mini plug P1 P2 P1 P2 TX PWR TX PWR P3 P4 P5 DATA P3 P4 P5 DATA Master side Slave side 54 the next slave unit. NOTE: If the data is not successfully transmitted, turn off both units, make sure the cable connection is correct and repeat the entire operation from the beginning. 55 Programming Software Installing and Starting (in windows XP system) NOTE: Even in same computer,the selective COM Port is different when USB cable Double click "TYT TH-9000D", then follow the installing instruction. Install USB Cable Driver Programme 1. Click start menu in computer, under "ALL PROGRAMS" menu, choose and click "USB To Com port" in TH-9000D program, install

"USB To Com port" driver by indication. 2. Connect the optional USB Programming cable to USB port in PC with transceiver.

(As pic 1) 3. Double click TH-9000D shortcut or click TH-9000D in procedure index of start menu, choose serial com port as indicated then click OK to start programming software. (As pic 2) 4. According to instruction,select correct"COM Port"(As pic 3),then click "OK" to start programming software. TX P1 P2 P3 P4 P5 PWR DATA connects with different USB port. You shall install software before connecting the USB cable line. Switch on transceiver before writing frequency.You had better not switch on or off the power supply of transceiver when it is connected with computer, otherwise, it will make transceiver unable to read or

(As pic 1) write frequency. In this case, you have to turn off programming software, pull out USB cable. then reinsert USB cable and open software, then rechoose COM Port, it will turn into normal operation. Therefore, please connect transceiver with computer after switching on the transceiver. Don't restart transceiver power when it is connected with computer. NOTE: This software has productidentify system, so when firstly installing the software, you have to connect the products, otherwise you can not start the software.

(As pic 2)

(As pic 3) 56 57 Maintenance Default Setting after Resetting(UHF) VFO frequency 445.00MHz DCS code TH-9000D DCS encode and decode Memory channel 0-199 Offset direction Offset frequency Channel step

600KHz 12.5KHz CTCSS encode and decode

CTCSS tone frequency 88.5Hz

Key-lock setting TOT APO Squelch Level

023N

OFF OFF OFF 4 Trouble Shooting Problem Possible Causes and Potential Solutions

(a) Power is on, nothing appears

+ and - polarities of power connection are reversed. on Display. Connect red lead to plus terminal and black lead to minus terminal of DC power supply.

(b) Fuse is blown. Check and solve problem resulting in blown fuse

(c) Display is too dim. Dimmer setting is "LAMP-L". Please make the and replace fuse with new fuse.

(d) No sound comes from speaker. Squelch is muted. Decrease squelch level. dimmer setting "LAMP-H". Tone or CTCSS/DCS squelch is active. Turn CTCSS or DCS squelch off.

(e) Key and Dial do not function. Key-lock function is activated. Cancel Key-lock function.

(i) Rotating Dial will not change Transceiver is in CALL mode. Press the VFO or memory channel. memory mode.

(g) PTT key is pressed but transmission Microphone connection is poor. Connect does not occur. microphone properly. Antenna connection is poor. Coonect antenna properly. 58 59 Specifications General Frequency Range Tx: 144-148 ,Rx:136-174MHz (FCC 150MHz Version) Number of Channels 200 channels Channel Spacing 25K (Wide Band) 12.5K (Narrow band) Receiver (ETSI EN 300 086 standard testing) Wide band Narrow band Sensitivity (12dB Sinad)

*0.25V Adjacent Channel Selectivity

*70dB Intermodulation Spurious Rejection

*65dB

*70dB

*0.35V

*60dB

*60dB

*70dB Phase-locked Step 5KHz*6.25KHz*8.33KHz*10KHz*12.5KHz*15KHz*20KHz*

Audio Response

+1*-3dB(0.3*3KHz)

+1*-3dB(0.3*2.55KHz) Operating Voltage 13.8V DC *15%

25KHz*30KHz*50KHz Squelch Carrier/CTCSS/DCS/5Tone/2Tone/DTMF Frequency Stability

*2.5ppm Operating Temperature

-20*+60*

Dimensions(WxHxD) 145(W)x47(H)x190(D)mm Weight Ant about 1.2kg None Hum & Noise

*45dB

*40dB Audio distortion Audio power output

*5%

*2W@10%

Transmitter (ETSI EN 300 086 standard testing) Wide band Narrow band Power Output Modulation 16K*F3E Adjacent Channel Power

*70dB Hum & Noise Spurious Emission

*40dB

*60dB VHF 65/25/10W ; UHF 45/25/10W 11K*F3E

*60dB

*36dB

*60dB Audio Response

+1*-3dB(0.3*3KHz)

+1*-3dB(0.3*2.55KHz) NOTE: Specifications are subject to change without notice due to advancements in technology. Audio Distortion

*5%

60 61 Attached Chart 50 groups CTCSS Tone Frequency(Hz) 67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 110.9 131.8 156.7 171.3 186.2 203.5 229.1 114.8 136.5 159.8 173.8 189.9 206.5 233.6 100.0 118.8 141.3 162.2 177.3 192.8 210.7 241.8 103.5 123.0 146.2 165.5 179.9 196.6 218.1 250.3 107.2 127.3 151.4 164.9 183.5 199.5 225.7 254.1 1024 groups DCS Code. 000 010 020 030 040 050 060 070 100 110 120 130 140 150 160 170 180 190 200 210 001 011 021 031 041 051 061 071 101 111 121 131 141 151 161 171 181 191 201 211 002 012 022 032 042 052 062 072 102 112 122 132 142 152 162 172 182 192 202 212 003 013 023 033 043 053 063 073 103 113 123 133 143 153 163 173 183 193 203 213 004 014 024 034 044 054 064 074 104 114 124 134 144 154 164 174 184 194 204 214 005 015 025 035 044 055 065 075 105 115 125 135 145 155 165 175 185 195 205 215 006 016 026 036 046 056 066 076 106 116 126 136 146 156 166 176 186 196 206 216 007 017 027 037 047 057 067 077 107 117 127 137 147 157 167 177 187 197 207 217 62 63 230 240 250 260 270 300 310 320 330 340 350 360 370 400 410 420 430 440 450 460 470 231 241 251 261 271 301 311 321 331 341 351 361 371 401 411 421 431 441 451 461 471 232 242 252 262 272 302 312 322 332 342 352 362 372 402 412 422 432 442 452 462 472 233 243 253 263 273 303 313 323 333 343 353 363 373 403 413 423 433 443 453 463 473 234 244 254 264 274 304 314 324 334 344 354 364 374 404 414 424 434 444 454 464 474 235 245 255 265 275 305 315 325 335 345 355 365 375 405 415 425 435 445 455 465 475 236 246 256 266 276 306 316 326 336 346 356 366 376 406 416 426 436 446 456 466 476 237 247 257 267 277 307 317 327 337 347 357 367 377 407 417 427 437 447 457 467 477 500 510 520 530 540 550 560 570 600 610 620 630 640 650 660 670 700 710 720 730 740 501 511 521 531 541 551 561 571 601 611 621 631 641 651 661 671 701 711 721 731 741 502 512 522 532 542 552 562 572 602 612 622 632 642 652 662 672 702 712 722 732 742 503 513 523 533 543 553 563 573 603 613 623 633 643 653 663 673 703 713 723 733 743 504 514 524 534 544 554 564 574 604 614 624 634 644 654 664 674 704 714 724 734 744 505 515 525 535 545 555 565 575 605 615 625 635 645 655 665 675 705 715 725 735 745 506 516 526 536 546 556 566 576 606 616 626 636 646 656 666 676 706 716 726 736 746 507 517 527 537 547 557 567 577 607 617 627 637 647 657 667 677 707 717 727 737 747 64 65 750 760 770 751 761 771 752 762 772 753 763 773 754 764 774 755 765 775 756 766 776 757 767 777 NOTE: N is positive code, is negative code, total: 232groups. FCC Warning NOTE: This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter-

ference to radio or television reception, which can be determind by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follwing measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 66 RF Exposure Warning Statements:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. L'appareil a t valu pour rpondre aux exigences gnrales en matire d'exposition 67

FCC ID Label Location 40mm*40mm FCC ID: POD-TH9000DV WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW.

Agent Authorization Company: TYT ELECTRONICS CO., LTD Address: Block 39-1, Optoelectronics-information industry base, Nan'an, Quanzhou, Fujian, China Product Name: Mobile Radio Model Number(s): TH-9000D Pro, TH-9000D Plus Product Description: Mobile Radio We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: Aug. 11, 2022 Name:

Jiamao Lin Title:

General Manager Company: TYT ELECTRONICS CO., LTD

TYT Electronics Co., Ltd. Block 39-1, Optoelectronics-information industry base, Nan'an, Quanzhou, Fujian, China Aug. 11, 2022 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: POD-TH9000DV Models: TH-9000D Pro, TH-9000D Plus To Whom It May Concern:

We, The TYT ELECTRONICS CO., LTD hereby declare that TH-9000D Pro and TH-9000D Plus have different model names. TH-9000D Plus does not used U301, U302, U303, U304 (For transmit noise reduction). Except for the different above, no other modification is performed. Sincerely, TYT ELECTRONICS CO., LTD Signature:

[Jiamao Lin, General Manager]

TYT Electronics Co., Ltd. Block 39-1, Optoelectronics-information industry base, Nan'an, Quanzhou, Fujian, China _________________________________________________________________________________________ Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Aug. 11, 2022 Subject; Request for Confidentiality FCC ID: POD-TH9000DV To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

________________________ Name: Jiamao Lin Title: General Manager

TYT ELECTRONICS CO., LTD Block 39-1, Optoelectronics-information industry base, Nan'an, Quanzhou, Fujian, China. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: POD-TH9000DV Date: Aug. 11, 2022 Subject: Declaration of compliance to the requirements of 15.121 We declare that, this scanning receiver is incapable of operating (tuning), or readily being altered by the users to operate, within the frequency bands allocated to the Cellular Radiotelephone Service in part 22 of this chapter (cellular telephone bands). This device will not be able to receive transmissions in the cellular telephone bands by means of clipping the leads of, or installing, a simple component such as a diode, resistor or jumper wire; replacing a plug-in semiconductor chip; or programming a semiconductor chip using special access codes or an external device, such as a personal computer. This device is also incapable of converting digital cellular communication transmissions to analog voice audio. This device is designed so that the tuning, control and filtering circuitry is inaccessible. Any attempts to modify the equipment to receive transmissions from the Cellular Radiotelephone Service will render the receiver inoperable. This scanning receiver rejects any signals from the Cellular Radiotelephone Service frequency bands that are 38 dB or lower based upon a 12 dB SINAD measurement. We are aware that the modification of this device to receive transmissions from Cellular Radiotelephone Service frequency bands will be considered to constitute manufacture of such equipment. This includes any individual, individuals, entity or organization that modifies one or more scanners. Any modification to receive transmissions from the Cellular Radiotelephone Service frequency bands voids the certification of the scanning receiver, regardless of the date of manufacture of the original unit. If you have any questions, please feel free to contact me. Thank you. Sincerely, Signatory Name: Jiamao Lin Title: General Manager