DPMR Digital Transceiver Trand name:TYT Model name:DM-UVF10 Frequency:136-174MHz,400-480MHz FCC ID:PODDM-UVF10 SAFETYTRAININGINFORMATION Your TYT ELECTRONICS CO., LTD radiogeneratorsRFelectromagneticenergyduring transmitmode.ThisradioisdesignedforandclassifiedasOccupationalUseOnly,meaningitmustbeusedonlyduringthe courseofemploymentbyindividualsawareofthehazards,andthewaysToMinimizeSuchhazards.ThisradioisNOTintended forusebytheGeneralPopulationinanuncontrolledenvironment.ThisradiohasbeentestedandcomplieswiththeFCCRF exposurelimitsforOccupationalUseOnly.Inaddition,your radiocomplieswith TYT ELECTRONICS CO., LTD thefollowingStandardsandGuidelineswithregardtoRFenergyandelectromagneticenergylevelsandevaluationofsuch FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human levelsforexposuretohumans:
to Radio Frequency Electromagnetic Fields. Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. Potentially Hazardous Electromagnetic Fields RF and Microwave. instruction) specified may result in RF exposure levels exceed the FCC requirements for wireless RF exposure. American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of The following accessories are authorized for use with this product. Use of accessories other than those (listed in the ToensureyoureyourexposetoRFelectromagneticenergyiswithintheFCCallowablelimitsforoccupationaluse,always adheretothefollowingguidelines TheinformationlistedaboveprovidestheuserwiththeinformationneededtomakehimorherawareofRFexposure, andwhattodotoassurethatthisradiooperateswiththeFCCRFexposurelimitsofthisradio. ElectromagneticInterference/Compatibility Duringtransmissions, TYT ELECTRONICS CO., LTD radiogeneratesRFenergythatcanpossiblycauseinterference withotherdevicesorsystems.Toavoidsuchinterference,turnofftheradioinareaswheresignsarepostedtodoso.DONOT operatethetransmitterinareasthataresensitivetoelectromagneticradiationsuchashospitals,aircraft,andblastingsites. Occupational/ControlledUse Theradiotransmitterisusedinsituationsinwhichpersonsareexposedasconsequenceoftheiremploymentprovided thosepersonsarefullyawareofthepotentialforexposureandcanexercisecontrolovertheirexposure. Attention:
This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure emvironment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning lable is affixed to all units. In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be maintained when held-to-face, and body-worn operations are restricted to the approved original acessories (belt clip). Do not use this device when antenna shows obvious damages