FCC ID: 2AON7-RT18 TRUE WIRELESS EARBUDS

TRUE WIRELESS EARBUDS WITH CHARGING CASE RT-18 USER MANUAL WHATS INCLUDED 1Charging box 2Earbud(L&R) 1Charging Cable 1Instruction manual BLUETOOTH PARING INSTRUCTION 1. Pick up two earbuds from charge casing to power on, you will hear power on meanwhile two earbuds flash blue LED light, after seconds it will be paired automatically at the same time will hear 2 chimes dong dong from two earbuds 2. Keep the distance between the device and earbuds within 10 meters. (For Bluetooth paring only) 3. Turn on the Bluetooth function on your device, search and select the Bluetooth code Soundmates. 4. You will hear device connected Indicating that Soundmates are now ready to use. Remark: two ways to reset earbuds. If your Soundmates arent pairing to each other, you need to put them in the charge casing then pick up them and it will auto pairing. FUNCTIONS Power on: Pick up two earbuds from charge casing Power off: Put back two earbuds into charge casing. MUSIC/CALL 1. Previous/Next song When music is playing, tap left earbud for three times to go to the previous song, tap right earbud for three times to go to the next song. 2. Play/pause Tap right earbud twice to play/pause music. 3. Answer /End an incoming call Tap right/left earbud twice to answer a call, and tap right/left twice again when you want to end the call. WAKE UP VOICE ASSISTANT/SIRI Tap left earbud twice, you will hear a beep to tell you that VA/Siri has woken up and is waiting to do your conmmands. CHARGING

(Be sure fully charge the earbuds before use for the first time.) Charging the box:

-Plug the standard USB charging cable into the charging box and a powered USB port. The charging boxs LEDindicators start to flash GREEN while charging. It fully charged when it stop flash and keep GREEN on. Charging the earbuds:

-Put the earbuds back into the charging box. The earbuds LED indicators turn RED and the charging box LEDindicators turn BLUE, both of them will be off when earbuds fully charged. SPECIFICATIONS Bluetooth Version: 5.0 Battery built-in earbuds: 30mAh*2, 3.7V Charging box battery: 250mAh, 3.7V Power output: 6mW Charging time for earbuds: 1H Charging time for station: 1H Music play time: about 3H at Max volume Talking time: about 3H Frequency: 20-20KHZ Product size: 51.5*44*21MM FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not -- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirement. in portable exposure condition without restriction.

Shenzhen HUAK Testing Technology Co., Ltd. FCC ID: 2AON7-RT18 EXTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 This report shall not be reproduced except in full, without the written approval of Shenzhen HUAK Testing Technology Co., Ltd. Page 1 of 5 Shenzhen HUAK Testing Technology Co., Ltd. FCC ID: 2AON7-RT18 Fig.3 Fig.4 This report shall not be reproduced except in full, without the written approval of Shenzhen HUAK Testing Technology Co., Ltd. Page 2 of 5 Shenzhen HUAK Testing Technology Co., Ltd. FCC ID: 2AON7-RT18 Fig.5 Fig.6 This report shall not be reproduced except in full, without the written approval of Shenzhen HUAK Testing Technology Co., Ltd. Page 3 of 5 Shenzhen HUAK Testing Technology Co., Ltd. FCC ID: 2AON7-RT18 Fig.7 Fig.8 This report shall not be reproduced except in full, without the written approval of Shenzhen HUAK Testing Technology Co., Ltd. Page 4 of 5 Shenzhen HUAK Testing Technology Co., Ltd. FCC ID: 2AON7-RT18 Fig.9 Fig.10 This report shall not be reproduced except in full, without the written approval of Shenzhen HUAK Testing Technology Co., Ltd. Page 5 of 5

Label & Label Location FCC ID: 2AON7-RT18 Size: 20mm(L)*5mm(W)

Room2026, Global Logistics Service Center, China South City, Pinghu Town, Longgang, Shenzhen, China. My Music Group Limited. Date: June 3, 2019 Federal Communications Commission 7345 Oakland Mills Road Columbia MD 21046 To Whom It May Concern:

The letter grants authorization of TZUMI Electronics,LLC to apply the FCC for a change in identification. This authorization applies to My Music Group Limited. FCC ID:QIF-RT18, granted on 5/29/2019, The equipment is electrically identical. We are aware that TZUMI Electronics,LLC intends to market the above referenced product under 2AON7-RT18 The only change being the FCC ID and the label on the device. The original test results, technical information and relevant documents continue to be representative of and applicable to the change ID equipment. Should there be any question, please feel free to contact us. Sincerely, Bessie Luo Name:

Company: My Music Group Limited. Address: Room2026, Global Logistics Service Center, China South City, Pinghu Town, Longgang, Shenzhen, China. 0086-755-25835499 0086-755-25839320 bessie@mymusicgroup.net Phone:

Fax:

E-Mail:

TZUMI Electronics,LLC 16 EAST 34TH STREET 16TH FLOOR NEW YORK, NY 10016 United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

6/3/2019 We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: [2AON7-RT18] including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name:

Company:

Address:

Phone:

Fax:

E-Mail:

Ezra Azar TZUMI Electronics,LLC 16 EAST 34TH STREET 16TH FLOOR NEW YORK, NY 10016 United States 212-689-6008 212-684-3622 Ezra@Tzumi.com

TZUMI Electronics,LLC Date: 03 June 2019 Federal Communications Commission 7345 Oakland Mills Road Columbia MD 21046 Attention: Application Examiner / Review Engineer Subject: Request for a Change in Identification per Section 2.933 of the FCC Rules FCC ID: 2AON7-RT18 To The Commission:

This change in identification request applies for a new FCC ID as established in 47 CFR 2.933(b) for a currently approved device. This application by TZUMI Electronics,LLC. will establish a new FCC ID under 2AON7-RT18 for the purpose of marketing. The original grant to My Music Group Limited. with QIF-RT18 will remain in effect. Per 2.933(b) 1.) The original identification is: QIF-RT18 2.) The original granted date is: 5/29/2019 3.) The equipment is electrically identical. 4.) The original test results are applicable and representative of this changed device. 5.) External photographs are included in this application. The following files are electronically submitted as attachments:

FCC ID label and label location External photographs Letter of Change FCC ID Authorization Letter for FCC ID User Manual Product Equality Declaration Sincerely, Name:

Company:

Address:

Phone:

Fax:

E-Mail:

Ezra Azar TZUMI Electronics,LLC 16 EAST 34TH STREET 16TH FLOOR NEW YORK, NY 10016 United States 212-689-6008 212-684-3622 Ezra@Tzumi.com

TZUMI Electronics,LLC 16 EAST 34TH STREET 16TH FLOOR NEW YORK, NY 10016 United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

5/30/2019 We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: [2AON7RT18] including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name:

Company:

Address:

Phone:

Fax:

E-Mail:

Ezra Azar TZUMI Electronics,LLC 16 EAST 34TH STREET 16TH FLOOR NEW YORK, NY 10016 United States 212-689-6008 212-684-3622 Ezra@Tzumi.com

TZUMI Electronics,LLC 16 EAST 34TH STREET 16TH FLOOR NEW YORK, NY 10016 United States Date: June 3, 2019 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, Original FCC ID: QIF-RT18; Model Number: RT18, 6759HD, 6759 New FCC ID: 2AON7-RT18; Model Number: RT18, 6759HD, 6759 This is to advise and officially, that we, TZUMI Electronics,LLC.hereby declare that the product name is same and only FCC ID difference as market requirement;

The original test results continue to be representative of and applicable to the equipment of the new FCC ID;

If you have any query, please feel free to contact me. Sincerely, Name:

Company:

Address:

Phone:

Fax:

E-Mail:

Ezra Azar TZUMI Electronics,LLC 16 EAST 34TH STREET 16TH FLOOR NEW YORK, NY 10016 United States 212-689-6008 212-684-3622 Ezra@Tzumi.com