Me-300S U-LOVE LIFE BONE CONDUCTION HEADPHONES User Manuals ON/OFF
Power/Volume+ Button
Volume- Button Check power Turn on the headphones
/+2 Press and hold the Power/Volume + Button for about 2 seconds until the blue light ashes Turn o the headphones
/+2 Press and hold the Power/Volume + Button for about 2 seconds until the blue light ashes once Bluetooth connection Function Button Ear-hook Ear-hook
Play/Pause music Click once Function Button Please read the user manual carefully and follow the guidelines in this manual to assemble or operate; the product may upgrade without notice.
Click the Volume +/- Button while idle state 1.+2 2.Me-300S 1. Keep pressing the Volume + button for about 2 seconds in the o state until the blue light ashes, the headphones turn on and enter the pairing state. 2. Open the bluetooth setting function of the device, select Me-300S", the blue light will turn o after bluetooth connected. Answer call Click once End call Click once Reject call 1 Press and hold for 1 sec Previous song Triple-click while music is playing Next song Double-click while music is playing 1. 2. 1.Ear-hook helps users with small head size to fasten the headphones. 2.Wearing: attach the ear-hook to the headphone bracket while the long cure on the ear-hook attach the back of the ear. Then move the ear-hook forward or backward until it ts properly. Visit the ocial website for more details http://www.u-lovelife.com/
Wearing Pull Catch it Catch it Optimal Placement Expanded state
+2
+2 Me-300S
+2 LED LED 1 PCS 1 PCS 0.5m 1 PCS 2 PCS 1 PCS 8217.8mm IP67 18g 1003dB 10
() 5.3
-422dB 20Hz~20KHz Bluetooth()A2DPHSPHFP 8 150mAh TYPE-CUSB
-10~500~90%
6890 Product Troubleshooting Unable To Turn On Hold and pressing the Volume + button for about 2 seconds to turn on or o, without any voice prompt or light: the headphones may be out of battery, need to charge. If the headphone still can not be turned on after charge, it may be the electronic circuit failure, please contact the after-sale service. Unable To Connect The headphones automatically connects to a previously connected terminal device (within valid distance) when it is turned on, making it impossible to connect to the new device. Treatment:
Delete the headphones bluetooth name from the bluetooth list of the connected terminal device, and then try to connect again. If the headphones bluetooth can never be found by the new terminal device, try to delete all the names in the bluetooth list of this terminal device, and then perform the pairing operation. If the headphones are still unable to match the device after power on, it may be the electronic circuit failure, please contact the after-sale service. Product Packing List Headphones 1 PCS Pouch 1 PCS Charging cable 0.5m 1 PCS User Manual 1 PCS Ear-hook 2 PCS Frequency range20Hz~20KHz Protection levelIP67 Loudspeaker sensitivity1003dB Mic sensitivity-422dB Product parameters Size8217.8mm WeightApprox. 18g Bluetooth5.3 Bluetooth connection distanceGreater than 10 meters (without barriers) ProtocolsSupport and compatible with Bluetooth (Bluetooth), A2DP, HSP, HFP and other protocols LoudspeakersBone conduction technology speaker, impedance 8 BatteryRechargeable lithium battery, capacity 150mAh ChargingUSB Type-C connector, USB standard charger EnvironmentTemperature: -10~50, Humidity: 0~90%
Time parametersAbout 6 hours of continuous music playback (depends on volume and audio source); about 8 hours of continuous calling; 90 minutes to complete charging SJ/T 11364 GB/T 26572 X GB/T 26572
(Pb)
(Hg)
(Cd)
(CrVI)
(PBB)
(PBDE) 1. 2. 3. 4. Check if the red light is on, it means that it is not charging. If the blue light is always on, it is fully charged. If the headphones still can not be charged, it may be the electronic circuit failure, please contact the after-sale service. Unable To Charge Check if the socket is ready. Check if the charger is ready. Attention 1. Do not disassemble the headphones, the electronic circuit and battery may cause harm to human body. 2. Do not burn the headphones, otherwise it may cause an explosion. 3. Do not throw the end-of-life headphones into the water, otherwise it will pollute the water and cause serious impact on the environment. 4. electronic circuit boards and batteries of end-of-life headphones must be submitted to the relevant recycling qualied institutions for processing, and must not be discarded at will. http://www.u-lovelife.com C16F ManufacturerU-lovelife (ShenZhen) technology limited Co.,Ltd Website: http://www.u-lovelife.com Address: 16F, Block C, Qifengda Building, Taoyuan Technology Innovation Park, Furong Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.