FMM13A Advanced CAT M1 terminal with flexible inputs configuration Quick Manual v1.8 CONTENT Content.................................................................................................................................................................................................................2 Know your device ................................................................................................................................................................................................3 Pinout ...................................................................................................................................................................................................................4 Wiring scheme .....................................................................................................................................................................................................5 Set up your device ..............................................................................................................................................................................................6 PC Connection (Windows) ..................................................................................................................................................................................7 How to install USB drivers (Windows) ..............................................................................................................................................................7 Configuration.......................................................................................................................................................................................................8 Quick SMS configuration ................................................................................................................................................................................. 10 Mounting recommendations.......................................................................................................................................................................... 12 Basic characteristics ........................................................................................................................................................................................ 13 LED indications ................................................................................................................................................................................................. 13 Electrical characteristics .................................................................................................................................................................................. 16 Safety information .......................................................................................................................................................................................... 18 Certification and Approvals ............................................................................................................................................................................ 19 Warranty ........................................................................................................................................................................................................... 21 Warranty disclaimer ....................................................................................................................................................................................... 21 2 Quick Manual v1.8 // FMM13ATelematics KNOW YOUR DEVICE TOP VIEW BOTTOM VIEW (WITHOUT COVER) TOP VIEW (WITHOUT COVER) STATUS LED NAVIGATE LED GNSS ANTENA MICRO-SIM SLOT 2x6 SOCKET BATTERY SOCKET 3 Quick Manual v1.8 // FMM13ATelematics PINOUT Pin number Pin name Description 1 2 3 4 5 6 7 8 VCC (10-30) V DC (+) Power supply (10-30 V DC) DOUT 3 DIN 3 / AIN 2 DIN 2-N / AIN 1 Digital output, channel 3. Open collector output. Max. 0,5 A DC Analog input, channel 2. Input range: 0-30 V DC / Digital input, channel 3 Digital input, channel 2, Negative input
(ground sense), Analog input, channel 1, Input range: 0-30 VDC INPUT 6 DIN1 DIN 2-N / AIN 1 DIN3/AIN2 DOUT3
+10...30 V DC 6 5 4 3 2 1 FMM13A 2x6 socket pinout 12 11 10 9 8 7 INPUT 5 1WIRE DATA 1WIRE POWER DOUT2 DOUT1 GND DIN 1 Digital input, channel 1 9 DOUT 2 Digital output, channel 2. Open collector output. Max. 0,5 A DC INPUT 6 TX EXT (LVCAN TX) GND (-) DOUT 1 Ground pin. (10-30) V DC () Digital output, channel 1. Open collector output. Max. 0,5 A DC 10 11 12 1WIRE POWER
+3,8 V output for 1 Wire devices 1WIRE DATA Data for 1Wire devices INPUT 5 RX EXT (LVCAN - RX) 4 Quick Manual v1.8 // FMM13ATelematics WIRING SCHEME IGNITION DETECTION ALARM BUTTON CAN-CONTROL 87 87a 85 30 86 FUEL GAUGE 6 5 4 3 2 1 12 11 10 9 8 7 STARTER ANALOG LLS SENSOR DOOR SENSOR POWER SUPPLY 10 - 30V DC CENTRAL LOCK IBUTTON BUZZER 5 Quick Manual v1.8 // FMM13ATelematicsDOUT21WIRE POWER1WIRE DATAGNDDOUT1INPUT 5DIN3/AIN2DIN2-N/AIN1DIN1DOUT3+10...30 V DCINPUT 6AIN2DIN3DIN2DIN2-N SET UP YOUR DEVICE HOW TO INSERT MICRO-SIM CARD AND CONNECT THE BATTERY 1 COVER REMOVAL 2 MICRO-SIM CARD INSERT 3 BATTERY CONNECTION 4 ATTACHING COVER BACK You will receive your device partly closed. Gently remove top and bottom covers. Insert SIM card as shown with PIN request disabled or read our Wiki1 how to enter it later in Teltonika Configurator2. Make sure that Micro-SIM card cut-off corner is pointing outward from slot. Connect battery as shown to device. Position the battery in place where it does not obstruct other components. After see configuration, PC Connection (Windows), attach device top and bottom cover back and press them twice to the full closure. Make sure that product casing is closed correctly. 1wiki.teltonika-gps.com/view/
FMM13A_Security_info 2wiki.teltonika-gps.com/view/
Teltonika_Configurator 6 Quick Manual v1.8 // FMM13ATelematics PC CONNECTION (WINDOWS) 1. Power-up FMM13A with DC voltage (10 30 V) power supply using supplied power cable. LEDs should start blinking, see LED indications. 2. Connect device to computer using Micro-USB cable or Bluetooth connection:
Using Micro-USB cable You will need to install USB drivers, see How to install USB drivers (Windows) Using Bluetooth FMM13A Bluetooth is enabled by default. Turn on Bluetooth on your PC, then select Add Bluetooth or other device
> Bluetooth. Choose your device named FMM13A_last_7_imei_digits, without LE in the end. Enter default password 5555, press Connect and then select Done. 3. You are now ready to use the device on your computer. HOW TO INSTALL USB DRIVERS (WINDOWS) 1. Please download COM port drivers from here1. 2. Extract and run TeltonikaCOMDriver.exe. 3. Click Next in driver installation window. 4. In the following window click Install button. 5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup. 1teltonika-gps.com/downloads/en/fmm13a/TeltonikaCOMDriver.zip 7 Quick Manual v1.8 // FMM13ATelematics CONFIGURATION At first FMM13A device will have default factory settings set. These settings should be changed according to the users needs. Main configuration can be performed via Teltonika Configurator1 software. Get the latest Configurator version from here2. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed. 1wiki.teltonika.lt/view/Teltonika_Configurator 2wiki.teltonika.lt/view/Teltonika_Configurator_versions MS .Net requirements Operating system MS .NET Framework version Version Links Windows Vista Windows 7 Windows 8.1 Windows 10 MS .NET Framework 4.6.2 32 and 64 bit www.microsoft.com1 1https://dotnet.microsoft.com/en-us/download/dotnet-framework/net462 8 Quick Manual v1.8 // FMM13ATelematics Downloaded Configurator will be in compressed archive. Extract it and launch Configurator.exe. After launch software language can be changed by clicking in the right bottom corner. Configuration process begins by pressing on connected device. After connection to Configurator Status window will be displayed. Various Status window1 tabs display information about GNSS2, GSM3, I/O4, Maintenance5 and etc. FMM13A has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button. Main buttons offer following functionality:
Load from device loads configuration from device. Save to device saves configuration to device. Load from file loads configuration from file. Save to file saves configuration to file. Update firmware updates firmware on device. Read records reads records from the device. Reboot device restarts device. Reset configuration sets device configuration to default. Most important configurator section is GPRS where all your server and GPRS settings6 can be configured and Data Acquisition7 where data acquiring parameters can be configured. More details about FMM13A configuration using Configurator can be found in our Wiki8. 1wiki.teltonika.lt/view/FMM13A_Status_info 2wiki.teltonika.lt/view/FMM13A_Status_info#GNSS_Info 3wiki.teltonika.lt/view/FMM13A_Status_info#GSM_Info 4wiki.teltonika.lt/view/FMM13A_Status_info#I.2FO_Info 5wiki.teltonika.lt/view/FMM13A_Status_info#Maintenance 6wiki.teltonika-gps.com/view/FMM13A_GPRS_settings 7teltonika-gps.com/view/FMM13A_Data_acquisition_settings 8wiki.teltonika-gps.com/view/FMM13A_Configuration 9 Quick Manual v1.8 // FMM13ATelematics QUICK SMS CONFIGURATION Default configuration has optimal parameters present to ensure best performance of track quality and data usage. Quickly set up your device by sending this SMS command to it:
setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0 1 2 3 4 5 6 Note: Before SMS text, two space symbols should be inserted. GPRS SETTINGS:
1
2
3 2001 APN 2002 APN username (if there are no APN username, empty field should be left) 2003 APN password (if there are no APN password, empty field should be left) SERVER SETTINGS:
4
5
6 2004 Domain 2005 Port 2006 Data sending protocol (0 TCP, 1 UDP) 10 Quick Manual v1.8 // FMM13ATelematics DEFAULT CONFIGURATION SETTINGS MOVEMENT AND IGNITION DETECTION:
DEVICE MAKES A RECORD ON MOVING IF ONE OF THESE EVENTS HAPPEN:
VEHICLE MOVEMENT will be detected by accelerometer IGNITION will be detected by vehicle power voltage between 13,2 30 V PASSES 300 seconds VEHICLE DRIVES 100 meters DEVICE MAKES A RECORD ON STOP IF:
RECORDS SENDING TO SERVER:
VEHICLE TURNS 10 degrees SPEED DIFFERENCE between last coordinate and current position is greater than 10 km/h 1 HOUR PASSES while vehicle is stationary and ignition is off EVERY 120 SECOND it is sent to the server If device has made a record After successful SMS configuration, FMM003 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator1 or SMS parameters2. 1wiki.teltonika-gps.com/view/Teltonika_Configurator 2wiki.teltonika-gps.com/view/Template:FMB_Device_Family_Parameter_list 11 Quick Manual v1.8 // FMM13ATelematics MOUNTING RECOMMENDATIONS CONNECTING WIRES Wires should be connected while the module is not plugged in. Wires should be fastened to stable wires or other non-moving parts. Any heat emitting and/or moving objects should be kept away from the wires. There should be no exposed wires. If factory isolation was removed while connecting the wires, the isolation material should be applied. If the wires are placed in the exterior or in places where they can be damaged or exposed to heat, humidity, dirt, etc., additional isolation should be applied and the wires should not be loose. Wires cannot be connected to the board computers or control units. CONNECTING POWER SOURCE Be sure that after the car computer goes to sleep mode, power might be still available on the power wires. Depending on the car model, this may happen in 5 to 30 minutes period. When the module is connected, measure the voltage again to make sure it did not decrease. It is recommended to connect to the main power cable in the fuse box. 3 A, 125 V external fuse shall be used. CONNECTING IGNITION WIRE Be sure to check if it is a real ignition wire i. e. power does not disappear after starting the engine. Check if this is not an ACC wire (when key is in the first position, most of the vehicle electronics are available). Check if power is still available when you turn off any of vehicles devices. Ignition is connected to the ignition relay output. As alternative, any other relay, which has power output when ignition is on, may be chosen. CONNECTING GROUND WIRE Ground wire is connected to the vehicle frame or metal parts that are fixed to the frame. If the wire is fixed with the bolt, the loop must be connected to the end of the wire. For better contact scrub paint from the spot where loop is going to be connected. 12 Quick Manual v1.8 // FMM13ATelematics LED INDICATIONS BASIC CHARACTERISTICS NAVIGATION LED INDICATIONS Behaviour Meaning Module Name FMM13A-Q2IB0: Quectel BG95-M1 with Teltonika TM2500 GNSS signal is not received Technology LTE CAT M1/GNSS/Bluetooth Permanently switched on Blinking every second Off Blinking fast constantly Normal mode, GNSS is working GNSS is turned off because:
Device is not working or Device is in sleep mode Device firmware is being flashed STATUS LED INDICATIONS Behaviour Meaning Blinking every second Normal mode Blinking every two seconds Sleep mode Blinking fast for a short time Modem activity GNSS GNSS GPS, GLONASS, GALILEO, BEIDOU, QZSS, AGPS Receiver Tracking: 33 Tracking sensitivity
-165 dBM Position accuracy
< 2.5 CEP Velocity accuracy
<0.1m/s (within +/- 15% error)
< 1 s
< 25 s
< 35 s Hot start Warm start Cold start Celluar Technology LTE CAT M1 Off Device is not working or Device is in boot mode 4G bands LTE FDD: B1/B2/B3/B4/B5/B8/B12/
B13/B18/B19/B20/B25/B27/B28/
B66/B85 13 Quick Manual v1.8 // FMM13ATelematics Data transfer LTE: Max. 588Kbps (DL)/Max. 1119(UL) Transmit power Class 3 for LTE-TDD: 20dBm
[-2~+2dB]
Class 3 for LTE-FDD: 20dBm
[-2~+2dB]
Supported peripherals Temperature and Humidity sensor, OBDII dongle, Inateck Barcode Scanner, Universal BLE sensors support Physical Specification Data support SMS (text/data) Dimensions 77 x 62 x 20 mm (L x W x H) Power Input voltage range 10 - 30 V DC with overvoltage protection Operating Environment Operating temperature
(without battery)
-20 C to +85 C Internal Back-up battery 170 mAh Li-Ion battery 3.7 V (0.63 Wh) Storage temperature
(without battery)
-20 C to +85 C Internal fuse 3A, 125V At 12V < 3 mA (Ultra Deep Sleep) At 12V < 5 mA (Deep Sleep) At 12V < 11 mA (Online Deep Sleep) Power Consumption At 12V < 18 mA (GPS Sleep) At 12V < 34 mA (nominal with no load) At 12V < 2A Max. (with full Load /
Peak) Bluetooth Specification 4.0 + LE Operating temperature (with battery)
-20 C to +40 C Storage temperature
(with battery)
-20 C to +45 C Operating humidity 5% to 95% non-condensing Ingress Protection Rating IP41 Battery charge temperature 0 C to +45 C Battery discharge temperature 0 C to +45 C 14 Quick Manual v1.8 // FMM13ATelematics Battery discharge temperature
-20 C to +60 C Interface Digital Inputs 3 Negative Inputs 1 (Digital Input 2) Impulse Inputs 2 (Digital Input 1, Digital Input 2) Digital Outputs Analog Inputs CAN Adapter Inputs 1-Wire 3 2 1 1 GNSS antenna Internal High Gain Cellular antenna Internal High Gain USB 2.0 Micro-USB LED indication 2 status LED lights SIM Micro-SIM Memory 128MB internal flash memory Features Sensors Accelerometer Scenarios Green Driving, Over Speeding detection, GNSS Fuel Counter, DOUT Control Via Call, Excessive Idling detection, Immobilizer, iButton Read Notification, Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip Sleep modes GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep Configuration and firmware update FOTA Web, FOTA, Teltonika Configurator (USB, Bluetooth), FMBT mobile application (Configuration) SMS Configuration, Events, DOUT control, Debug GPRS commands Configuration, DOUT control, Debug Time Synchronization GNSS, NITZ, NTP Fuel monitoring LLS (Analog), LV-CAN200, ALL-
CAN300, CAN-CONTROL, OBDII dongle Ignition detection Digital Input 1, Accelerometer, External Power Voltage, Engine RPM
(CAN Adapters, OBDII dongle) 15 Quick Manual v1.8 // FMM13ATelematics ELECTRICAL CHARACTERISTICS Characteristic description Value Supply voltage Min. Typ. Max. Unit Supply Voltage
(Recommended Operating Conditions)
+10
+30 V Digital output (open drain grade) Drain current (Digital Output OFF) Drain current
(Digital Output ON, Recommended Operating Conditions) Static Drain-Source resistance (Digital Output ON) Digital input Input resistance (DIN1) Input resistance (DIN2) Input resistance (DIN3) 120 A 0.1 0.5 A 400 600 m 47 38.45 150 k k k Characteristic description Value Supply voltage Min. Typ. Max. Unit Input Voltage threshold
(DIN1) Input Voltage threshold
(DIN2) Input Voltage threshold
(DIN3) Analog input Input voltage
(Recommended Operating Conditions), Range 1 Input resistance, Range 1 Measurement error on 12V, Range 1 Additional error on 12 V, Range 1 Measurement error on 30 V, Range 1 Additional error on 30 V, Range 1 7.5 2.5 2.5 V V V 0
+10 V 38.45 0.9 108 0.33 88 k
mV
mV 16 Quick Manual v1.8 // FMM13ATelematics Characteristic description Value Characteristic description Value Supply voltage Min. Typ. Max. Unit Supply voltage Min. Typ. Max. Unit 0
+30 V Input Voltage
(Recommended Operating Conditions), Range 2 Input resistance, Range 2 Measurement error on 12 V, Range 2 Additional error on 12 V, Range 2 Measurement error on 30 V, Range 2 Additional error on 30 V, Range 2 Output supply voltage 1-wire 150 0.9 108 0.33 88 Supply voltage
+4.5
+4.7 Output inner resistance Output current (Uout
> 3.0 V) Short circuit current
(Uout = 0) 7 30 75 k
mV
mV V mA mA Negative input Input resistance 38.45 Input voltage
(Recommended Operating Conditions) 0 Input voltage threshold 0.5 Supply oltage k V V Sink current 180 nA 17 Quick Manual v1.8 // FMM13ATelematics SAFETY INFORMATION This message contains information on how to operate FMM13A safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is +10+30 V DC. To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation. When connecting the 2x6 connector wires to the vehicle, the appropriate jumpers of the vehicle power supply Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply. All wireless data transferring devices produce interference that may affect other devices which are placed nearby. Please consult representatives of your vehicle model regarding OBDII location on your vehicle. In case you are not sure about proper connection, please consult qualified personnel. The programming must be performed using a PC with autonomic power supply. Installation and/or handling during a lightning storm is prohibited. should be disconnected. The device is susceptible to water and humidity. Before unmounting the device from the vehicle, the 2x6 connector must be disconnected. The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 60950-1 standard. The device FMM13A is not designed as a navigational device for boats. Teltonika is not responsible for any harm caused by wrong cables used for connection between PC and FMM003 WARNING! Do not use FMM003 device if it distracts driver or causes inconvenience due to OBDII placement. Device must not interfere with driver. Battery should not be disposed of with general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them to battery recycle bin found in stores. 18 Quick Manual v1.8 // FMM13ATelematics CERTIFICATION AND APPROVALS This sign on the package means that it is necessary to read the Users Manual before your start using the device. Full Users Manual version can be found in our Wiki1. 1wiki.teltonika-gps.com/view/FMM13A This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste. FCC ID:2A3HUFMM13A. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, interference that may cause undesired operation. including This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 19 Quick Manual v1.8 // FMM13ATelematics IC ID: 28804-FMM13A. Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Pour se conformer aux exigences de conformit d'exposition aux radiofrquences RSS-102, cette subvention s'applique uniquement aux configurations mobiles. Les antennes utilises pour l'metteur doivent tre installes pour fournir une distance de sparation d'au moins 20cm de toutes les personnes et ne doivent pas tre co-localises ou fonctionner en conjonction avec une autre antenne ou metteur. CHECK ALL CERTIFICATES All newest certificates may be found in our Wivki2. 2 wiki.teltonika-gps.com/view/FMM13A_Certification_%26_Approvals IC NOTICE This device complies with Industry Canada license-
exempt RSS standard(s). Operation is subject to the following two conditions:
1. 2. this device may not cause interference, and this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. IC ID: 28804-FMM13A. ISED radiation This equipment complies with exposure limits set forth for an uncontrolled environment. To comply with RSS-102 RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. REMARQUE IC Cet appareil est conforme aux Normes RSS d'Industy Canada. Son utilisation est soumise deux conditions:
3. Ce dispositif ne peut pas provoquer d'interfrences, et 4. Ce dispositif doit accepter les interfrences reues, y compris les interfrences susceptibles de provoquer un fonctionnement non souhait. toutes Cet appareil de classe B est conforme la norme canadienne ICES-003. 20 Quick Manual v1.8 // FMM13ATelematics WARRANTY TELTONIKA guarantees its products to be free of any manufacturing defects for a period of 24 months. With additional agreement we can agree on a different warranty period, for more detailed information please contact our sales manager. Contact us teltonika-iot-group.com/about-us/contacts/
All batteries carry a reduced 6 month warranty period. If a product should fail within this specific warranty time, the product can be:
Repaired Replaced with a new product Replaced with an equivalent repaired product fulfilling the same functionality TELTONIKA can also repair products that are out of warranty at an agreed cost. WARRANTY DISCLAIMER TELTONIKA PRODUCTS ARE INTENDED TO BE USED BY PERSONS WITH TRAINING AND EXPERIENCE. ANY OTHER USE RENDERS THE LIMITED WARRANTIES EXPRESSED HEREIN AND ALL IMPLIED WARRANTIES NULL AND VOID AND SAME ARE HEREBY EXCLUDED. ALSO EXCLUDED FROM THIS LIMITED WARRANTY ARE ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO, LOSS OF USE OR REVENUE, LOSS OF TIME, INCONVENIENCE OR ANY OTHER ECONOMIC LOSS. More information can be found at teltonika-iot-group.com/about-us/policies-certificates/warranty-repair 21 Quick Manual v1.8 // FMM13ATelematics