User Manual Material 80G woodfree paper Process: 1c/1c k=100 Warranty At Ubio Labs, we are dedicated to designing and manufacturing products with superior performance and 100% customer satisfaction. All of our products come with a 1 year limited warranty from date of purchase. We are always improving our products features and functionality. We reserve the right to change product specifications at any time without notice. IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY Important Safety Instructions WARNING - When using this product, basic precautions should always be followed, including the following:
a) Read all manufacturers instructions before using this product. b) To reduce the risk of injury, close supervision is necessary when the product is used near children. c) Do not put fingers or hands into the product. d) Do not expose wireless pad to moisture, rain, or snow. e) Use of a power supply or charger not recommended or sold by wireless pad manufacturer may result in a risk of fire or injury to persons. f) Do not use the wireless pad in excess of its output rating. Overloaded outputs above rating may result in a risk of fire or injury to persons. g) Do not disassemble the wireless pad. Take it to a qualified service person when service or repairs are required. Incorrect reassembly may result in a risk of fire or injury to persons. h) Do not expose the wireless pad to fire or excessive temperature. Exposure to fire or temperature above 122F may cause explosion. The wireless pads working temperature is 104F. i) Have service performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with with minimum distance 20cm between the radiator& your body. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with RSS102 Radio Frequency (RF) Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Cet quipement est conforme aux limites d'exposition de rayonnement d'IC RSS-102 dtermines pour un environnement non contrl. Cet quipement devrait tre install et actionn avec la distance minimum 20 cm entre le radiateur et votre corps. Wireless Dual Wireless Charging Pad for iPhone and Apple Watch User Manual and Safety Instructions Wireless Charger 1 3 2 4 Features 1 ) Apple Watch Magnetic Charging Module 2 ) Qi Wireless Surface 3 ) Qi Wireless LED Charge Indicator 4 ) DC Power Ina Technical Specications Component: AWC1087 Input: DC 9V, 2A Output 1: Qi (10W / 7.5W / 5W) Output 2: Apple Watch Magnetic Charging Module Charge Indicator: White/amber* LED indicator Dimensions: 80 x 166 x 14 mm (3.15 x 6.53 x 0.55 in) Weight: 225 g (9.94 oz) Your wireless pad is designed to provide optimal charging for your wireless device:
10W Qi certied fast charging for Samsung Galaxy S6 and later, Samsung Note5 and later, Motorola, LG 7.5W wireless charging for iPhone 8 and later All Apple Watch Models Compatible with AirPods wireless charging case, Google Pixel 3/3XL, and other compatible devices
* A blinking amber LED indicates a foreign object has been detected (metal objects like keys, coins, magnets, etc.) and the device is automatically turned off to ensure safety. Removal of foreign object and proper alignment of phone will result in normal operation. Wall Adapter Folding Wall Prongs 6 Ft. Cable Technical Specications Model: CHG1087 Input: AC 110-240V, 50-60 Hz, 0.5A Output: 18W DC 9V2A Dimensions: 57.5 x 43 x 26 mm (1.96 x 1.7 x 1 in) Weight: 80 g (2.82 oz) DO NOT RETURN TO THE STORE Our customer service team is here to help. Model: AWC1087 www.ubiolabs.com support@ubiolabs.com 1-866-642-4428
(Monday - Friday 9am - 4:30pm PST) 2821 Northup Way, Suite 250 Bellevue, WA 98004 SAVE THESE INSTRUCTIONS iPhone, Apple Watch and AirPods are a trademark of Apple Inc., registered in the U.S. and other countries.