User Manual Material 80G woodfree paper 8 Page Saddle Stitch Booklet Two Signatures Process: 1c/1c illumia LED Desk Lamp with Wireless Charger User Manual and Safety Instructions Desk Lamp with Wireless Charging Technical Specifications:
Component: UTL1006 Input: 9V, 2.5A Output (Wireless): Qi (10W / 7.5W / 5W) Output (USB-A): 5V, 2A, 10W White Light: 8W 0-650 lumens Max, 2800-6500 Kelvin RGB Light: 1W, 6 color selections Dimensions: 366 x 160 x 332 mm (14.4 x 6.3 x 13.1 in.) Weight: 800 g (1.8 lb.) Features:
1 LED Array 2 Wireless Charging Surface 3 LED Charge Indicator 4 Control Center 5 Rear LED Array 6 USB-A Output 7 Wall Adapter Input 1 2 3 4 5 6 7 Your wireless charging lamp is designed to provide optimal charging for your wireless device:
10W Qi certied fast charging for Samsung Galaxy S6 and later, Samsung Note5 and later, Motorola, LG 7.5W wireless charging for iPhone 8 and later Compatible with Google Pixel 3/3XL, and other compatible devices. Plug in Lamp Wall Adapter 5.25 ft. Cable Technical Specifications:
Model: AS024-0902500U Input: AC 110-240V, 50/60 Hz Output: 22.5W, 9V2.5A Dimensions: 71 x 44 x 52 mm (2.8 x 1.7 x 2.0 in) Weight: 130 g (4.6 oz) IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY | SAVE THESE INSTRUCTIONS Touch controls Charge devices Power and Qi charging indicator White Temperature Cycle through warm/natural/cool RGB Night Lamp Single press on/off Press and hold to cycle through 6 colors Lamp Power Single press on/off Press and hold for dimming Important Safety Instructions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING When using this product, basic precautions should always be followed, including the following:
a) Read all the instructions before using the product. b) To reduce the risk of injury, close supervision is necessary when the product is used near children. c) Do not put ngers or hands into the product. d) Do not expose device to rain or snow. e) Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of re or injury to persons. f) Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of re or injury to persons. g) Do not use the device that is damaged or modied. Damaged or modied batteries may exhibit unpredictable behavior resulting in re, explosion or risk of injury. h) Do not disassemble the device. Take it to a qualied service person when service or repair is required. Incorrect reassembly may result in a risk of re or injury to persons. i) Do not expose a power pack to re or excessive temperature. Exposure to re or temperature above 100C may cause explosion. The temperature of 100C can be replaced by the temperature of 212F. j) Have servicing performed by a qualied repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. k) Switch off the device when not in use. Thank you for your purchase!
Warranty At Ubio Labs, we are dedicated to designing and manufacturing products with superior performance and 100% customer satisfaction. All of our products come with a 1-year limited warranty from date of purchase. We are always improving our products features and functionality. We reserve the right to change product specications at any time without notice. DO NOT RETURN TO THE STORE Our customer service team is here to help. www.ubiolabs.com | support@ubiolabs.com 1-866-642-4428 (Monday - Friday 9am - 4:30pm PST) Ubio Labs, Inc. | 2821 Northup Way, Suite 250 Bellevue, WA 98004 FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC WARNING This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device ADVERTENCIA IC Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes :
(1) Cet appareil ne doit pas causer d'interfrences.
(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil.