Datasheet AF60-HD airFiber 60 HD 2 km, multi-gigabit, 60 GHz bridge with SFP+ support. The airFiber 60 HD (AF60 HD) is a 60 GHz radio designed to create superior, mid-range, point-to-point (PtP) links up to 2 km. The AF60 HD delivers low-interference, low-latency throughput within the 60 GHz spectrum. Compact and highly durable, the AF60 HD also features integrated GPS and a Bluetooth management radio to simplify setup, conguration, and monitoring. This bridge is ideal for ISPs looking to maximize signal linking with cost-
effective equipment. Enclosure Materials Aluminum Alloy, UV Stabilized Plastic Mechanical Dimensions Weight Mount Material Mount Wind Loading Weatherproong Hardware Processor Memory Networking Interfaces Button RF Connections Power Method Power Supply Max. Power Consumption LEDs Power Ethernet GPS 60G 189 x 89 mm (7.4x 3.5") Without Mount: 1.8 kg (3.9 lb) With Mount: 2.95 kg (6.5 lb) Stainless Steel (SUS304) 60G Precision Alignment Pole Mount (Included) 64 N at 200 km/h (14.39 lbf at 125 mph) IPX6 Quad-Core ARM Cortex A72 at 1.6 GHz
(1) 10/100/1000 Mbps RJ45 Ethernet
(1)1/10 Gbps SFP+
2 GB DDR4 Factory Reset Internal 29.31W Flashing White: Bootup in Progress White: Not Connected to UISPController Blue: Connected toUISP Controller Flashing Blue:Ethernet Activity Blue: Receiving at Least (4) GPS Satellite Signals Blue: Active Connection Passive PoE 4-Pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) or 2-Pairs (4, 5+; 7, 8-) 48VDC, 0.65A Gigabit PoE Adapter (Included) Supported Voltage Range 48VDC 10%
Operating Temperature
-40to 55 C (-40to 131 F) Operating Humidity Certications 5 to 95% Noncondensing FCC, IC, CE,terragraph 2 of 3 System Maximum Range Encryption Uplink/Downlink Ratio Software OS Modes Services Utilities Network Wireless Settings Management interface Operating Frequency*
RF GPS Channel Bandwidth Operating Channels Beamwidth Maximum Throughput 60 GHz: 3.8 Gbps/6 Gbps (With Channel BondingEnabled) WPA2-PSK (AES) 2 km 50/50 airFiber PtP Only UISP, Ping Watchdog, Web Server, SSH Server, NTP Client, System Log,Device Discovery Beamform Info, Discovery Utility, Ping, Trace Route, Speed Test Bridge Mode GPS Sync*
*GPS is used to populate UI/UX elements. Bluetooth management for easy setup over UISP App WEB UI Minimum Software Requirements Modern WebBrowser or Android/iOS Smartphone 57 to 66 GHz
* Depends on regulatory region. Yes 2160 MHz/4320 MHz (With Channel Bonding Enabled) 58320, 59400, 60480, 61560, 62640, 63720, 64800 MHz*
*It depends on the channel bandwidth HPOL: NaN (The Antenna is Only Vertically Polarized) VPOL: 3 Elevation: 3 Electrical Downtilt 0 Specifications are s ubjec t to c hange. Ubiquiti products are sold with a limited warranty described at: www.ui.com/support/warranty 2021 Ubiquiti Inc. All rights res erved. Ubiquiti, Ubiquiti Network s, the Ubiquiti U logo, airFiber, airOS, and UISP are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. All other trademark s are the property of their respective owners. FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. The following apply to Class A products This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ISED Canada CAN ICES-3(A)/NMB-3(A) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. CAN ICES-3(A)/NMB-3(A) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. lappareil ne doit pas produire de brouillage;
2. lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 60(FCC/IC) cm from all persons and must not be located or operating in con junction with any other antenna or transmitter. Les antennes utilises pour ce transmetteur doivent tre install en considrant une dis tance de sparation de toute personnes daumoins 60(FCC/IC) cm et ne doivent pas tre localis ou utilis en conflit avec tout autre antenne ou transmetteur.