FCC ID: SWX-WAVEAPR Digital Transmission Radio

E-Label User Information FCC ID: SWX-WAVEAPR IC ID: 6545A-WAVEAPR Ubiquiti Inc. will be incorporating the E-Label procedures per FCC KDB 784748-D02. The information below is what will be included in the E-Labeling. E-label and warning statements can be found in the device/controller GUI under Device >

Settings > About. Detailed compliance information including Declaration of Conformity is available at the following internet address: ui.com/compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generated, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user bill be required to correct the interference at his own expense. ISED Canada CAN ICES-3 (A) / NMB-3 (A) This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (A) / NMB-3 (A) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1. Lappareil ne doit pas produire de brouillage;

2. Iappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 45 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. Les antennes utilises pour ce transmetteur doivent tre install en considrant une distance de sparation de toute personnes dau moins 45 cm et ne doivent pas tre localis ou utilize en conflit avec tout autre antenne ou transmetteur.

WIS Pp Wave AP 13mm os 25mm<@<75mm

[ L

| OTT TTY in ANVIL

LAN 4 Download on the

@ App Store GET IT ON

> Google Play Get Answers help.ui.com UI Support P

Date: 7/18/2022 TIMCO Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 RE: Request for Confidentiality Theory of Operation Software Security Description Sincerely, Mark Feil Ubiquiti lnc. Compliance Manager In reference to the application under FCC ID: SWX-WAVEAPR, and pursuant to Sections 0.457(d)1(ii) and 0.459 of the Commissions Rules, Ubiquiti Networks hereby requests permanent confidential treatment of the accompanying information as outlined below:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to Ubiquiti Networks and provide unjustified benefits to its competitors. It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Ubiquiti Networks understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. 685 3RD AVE. NEW Y0RK, NY 10071 www.ui.com

Date: 18 July 2022 Federal Communications Commission 7435 Oakland Mills Rd. Columbia, MD 21046 RE: Request for Class II Permissive Change FCC: SWX-WAVEAPR It is hereby requested that Ubiquiti Inc. obtain FCC Class II Permissive Change certification of a radio apparatus on the Ubiquiti Inc. product Wave-AP. The associated FCC: number is listed above. The Class II Permissive Change certification is to add U-NII-2a and U-NII-2c frequencies bands. The Wave-AP is a fixed point-to-point or point-to-multiple point transceiver operating in the 57 GHz to 71 GHz range. The Wave-AP provides 2.5+ Gpbs throughput and supports up to 15 client devices. The Wave-AP has a 5150 MHz to 5875 MHz (802.11ax) back-up radio. A Bluetooth LE transceiver is included for device management. The Wave-AP is an outdoor device and has an Ethernet port is used for transfer and to provide power using an Ubiquiti U-POE-at Power Supply. Sincerely, Mark Feil Ubiquiti lnc. Compliance Manager 685 3RD AVE. NEW Y0RK, NY 10071 www.ui.com

Power of Attorney Date: 2021/01/20 Dear Sir or Madam, I hereby have entrusted the following entity to be an authorized agent regarding application for Type Certification. Ubiquiti Inc. also authorizes the following entity to be a proxy to handle all certification matters. Unified Compliance Laboratories Address : 427 W 128000 South Draper Utah 84020 e-mail : ucl@ui.com Applicant : Ubiquiti Inc. Address : 685 Third Avenue ,New York NY 10017 United States Of America Name and Job Title. : Mark Feil / Compliance Director E-mail : compliance@ui.com Tel. : 385-200-1617