Datasheet UA-G2-Pro Access Reader G2 Pro UA-G2-Pro Mechanical Dimensions Weight Enclosure material Mounting material Mounting Weatherproong Hardware 160 x 40.4 x 40 mm (6.3x 1.6x 1.5") 120 g (4.2oz) Polycarbonate, glass Aluminum alloy Wall, gang box IP-55 Networking interface
(1) 10/100/1,000 MbE RJ45 port Connectivity Power method Supported voltage range Max. power consumption BLE 4.2 NFC PoE 48V 5W ESD/EMP protection Air: 15KV, contact: 8KV Sensors Camera Michrophone Speaker LEDs Button NFC frequency NFC read range NFC standards NFC technology ToF sensor 4096x 3072, 12 MP, 30 FPS Yes
(1) IP67, 4 ohm, 1.5W R/G/B/W Flash
(1) Factory-reset 13.56 Mhz
< 30 mm ISO 14443A, 14443B, 15693 NFC Tag 1,2,3,4,5 MIFARE Classic MIFARE Plus MIFARE Ultralight MIFARE DESFire Operating temperature
-10 to 40 C (14to 104 F) Operating humidity Certications 5 to 95% noncondensing FCC, IC Specifications are subjec t to change. Ubiquiti products are sold with a limited warranty described at: www.ui.com/support/warranty 2022 Ubiquiti Inc. All rights res erv ed. Ubiquiti, Ubiquiti Network s, the Ubiquiti U logo, UniFi, and UniFi Access are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. All other trademark s are the property of their respective owners. FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help."
ISED Canada CAN ICES-3(A)/NMB-3(A) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. CAN ICES-3(A)/NMB-3(A) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio ex-
empts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. lappareil ne doit pas produire de brouillage;
2. lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20(FCC/IC) cm from all persons and must not be located or operating in con junction with any other antenna or transmitter. Les antennes utilises pour ce transmetteur doivent tre install en considrant une dis tance de sparation de toute personnes daumoins 20 (FCC/IC) cm et ne doivent pas tre localis ou utilis en conflit avec tout autre antenne ou transmetteur.`