UXG-ProDatasheet Datasheet UXG-Pro UniFi Gateway Pro UniFi Next-Generation Gateway Professional (UXG-Pro) is a powerful rackmount security gateway for medium to large sized networks. It provides 10G SFP+ and 1 Gbps RJ45 WAN/LAN interfaces with enterprise-class DPI, IPS/IDS, and firewall. The UXG-Pro features advanced threat management for enhancing network security and high throughput performance to meet the demands of bandwidth-intensive applications. Easily pair UXG-
Pro with a Cloud Key or Cloud Key Plus device for an integrated UniFi management solution, or quickly adopt UXG-Pro by a server-based UniFi Network Controller. Mechanical Dimensions 442.4 x 43.7 x 285.6 mm (17.42 x 1.72 x 11.24") Weight 3.42 kg (7.54 lb) Enclosure Material Front Panel: Aluminum CNC Top Cover/Base: SGCC + Painting Hardware Processor Quad-Core ARM Cortex-A57 at 1.7 GHz Memory Information 16 GB DDR4 (2 GB) Management Interface Ethernet In-Band Bluetooth Networking Interface LAN:
(1) 10/100/1000 Mbps RJ45 Ethernet
(1) 1/10 Gbps SFP+ Ethernet WAN:
(1) 10/100/1000 Mbps RJ45 Ethernet
(1) 1/10 Gbps SFP+ Ethernet Button Reset LEDs White/Blue Power Method
(1) Universal AC In-
put (1) RPS DC Input Power Supply 125V~, 2.7A Max, 60Hz Supported Voltage Range 125V~,2A Max, 60Hz Max. Power Consumption 30W Warning Statement FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1.This de-
vice may not cause harmful interference, and 2.This device must accept any interference received, including interference that may cause undesired operation. The following apply to Class A products This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency en-
ergy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Opera-
tions of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ISED Canada CAN ICES-3(A)/NMB-3(A) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : 1. lappareil ne doit pas produire de brouillage;
2. lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. Les antennes utilises pour ce transmetteur doivent tre install en considrant une distance de sparation de toute personnes dau moins 20 cm et ne doivent pas tre localis ou utilis en conflit avec tout autre antenne ou transmetteur. Specications are subject to change. Ubiquiti products are sold with a limited warranty described at: www.ui.com/
support/warranty 2020 Ubiquiti Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, UniFi, and UniFi Network are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.