Datasheet USW-Mission-Critical UniFi Mission-Critical Switch Infrastructure PoE Switch with Uninterruptible Power Supply. UniFi Mission-Critical Switch delivers power to vital network devices while maintaining high reliability via multiple powering options: internal battery backup, AC power, and external 48VDC battery (not included). The managed Layer 2 switch offers nine Gigabit RJ45 ports: four with 802.3bt PoE++ to power UniFi Access devices, four with 802.3af/at PoE to power UniFi APs, switches, or cameras, and one for uplink to the gateway. Two AC outputs power 100-120Vdevices, including the modem and gateway. The 1.3" touchscreen provides current switch states and the necessary information you need for quick diagnosis. AR (Augmented Reality) switch management simplies network changes. The UniFi Network Controller and UniFi Network mobile app allows admins to congure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere. Max. Power Consumption (Excluding PoE Output) 50W (10 + 40W Internal Chargers) Mechanical Dimensions Weight Enclosure Material Mount Material Hardware Total Non-Blocking Throughput Switching Capacity Forwarding Rate Max. Power Consumption PoE Budget Power Method Power Supply Power Output Power Output Budget Networking Interfaces PoE Interfaces Max PoE+ Wattage per Port by PSE (AT) Max PoE+ Wattage per Port by PSE (BT) Voltage Range 802.3af Mode Voltage Range 802.3at/bt Mode LCM Display 442x 480 x 44 mm (17.4x 18.9 x 1.7") Without Mount: 9.01 kg (19.86 lb) WithMount: 9.2 kg (20.28 lb) SGCC Steel SGCC Steel 9 Gbps 18 Gbps 26.78 Mpps 240W 120W 80W 32W 64W 44-57V 50-57V
(1) Universal AC input, 100-240VAC, 4.4A Max, 50/60 Hz
(1) DC Input for External 48VDC Battery
(1) Internal Lithium-Ion Battery, 368Wh Universal AC Input: AC/DC, Internal, 240W External Battery Port: DC,External, 240W
(2) Power Control Outlets, 100-120VAC, 0.8A Max., 60Hz
(9) 10/100/1000 Mbps Ethernet RJ45 Ports
(4) PoE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-)
(4) 60W PoE++ IEEE802.3bt (Pair A 1, 2+; 3, 6-)(Pair B 4, 5+; 7, 8-)
(1) 1.3" Touchscreen Bootup Animation: Bootup in Progress Firmware Upgrade Icon: Firmware Upgrading Steady White: Factory Defaults, Awaiting Adoption Steady Blue: Device is Adopted Management Interface Ethernet In-Band Bluetooth 2 of 3 Modes SMB Layer 2 PoE Gigabit Ethernet Switch ESD/EMP Protection Air/Contact: 24 kV Operating Temperature
-5to 40 C (23 to 104 F) Operating Humidity Certications 5 to 95% Noncondensing FCC, IC LEDs Ethernet PoE Power Output Blue: Active Green: 1 Gbps, Amber: 10/100 Mbps Amber: IEEE 802.3af/at/bt Specifications are s ubjec t to c hange. Ubiquiti products are sold with a limited warranty described at: www.ui.com/support/warranty 2021 Ubiquiti Inc. All rights res erved. Ubiquiti, Ubiquiti Network s, the Ubiquiti U logo, the Ubiquiti beam logo, UniFi, and UniFi Network are trademarks or registered trademarks of Ubiquiti Inc . in the United States and in other countries . All other trademarks are the property of their respective owners. FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. SED Canada CAN ICES-3(A)/NMB-3(A) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(A)/NMB-3(A) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. lappareil ne doit pas produire de brouillage;
2. lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est sus ceptible den compromettre le fonctionnement. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. Les antennes utilises pour ce transmetteur doivent tre install en considrant une distance de sparation de toute personnes dau moins 20 cm et ne doivent pas tre localis ou utilis en conflit avec tout autre antenne ou transmetteur.