FCC ID: SWX-UVCG4DP UniFi Protect G4 Doorbell Pro

Datasheet UVC-G4 Doorbell Pro Protect G4 Doorbell Pro A WiFi-connected video doorbell equipped with dual HD cameras, a programmable display, ngerprint scanner, and porch light The UniFi Protect G4 Doorbell Pro is a WiFi-enabled doorbell equipped with two 5MP cameras that capture 1080p entryway video. Each camera is equipped with an enhanced night vision sensor that, when combined with the built-

in porch light, ensures clear motion monitoring regardless of the weather or time of day. The UniFi Protect G4 Doorbell Pro features two-way audio transfer so you can interact with visitors from afar, or you can show alerts and delivery instructions while youre away with its programmable display. An integrated ngerprint scanner also grants enhanced access control by allowing you to locally store up to 30 ngerprints of authorized entrants. The UniFi Protect G4 Doorbell Pro delivers thorough surveillance and promotes ease of use, starting with its simple setup and conguration process that can be completed in the UniFi Protect app. Weatherproong IPX4 Mechanical Dimensions Weight Enclosure materials Mount materials Optics Sensor Lens View angle Night mode Video Video compression Resolution Maximum frame rate System Processor specs Memory information Management interface Networking interface Flash memory support Max. power consumption Power requirements 160.6x 51.8 x 28.7 mm (6.32 x 2.04 x 1.13") Without mount: 236 g (8.3oz) With at wall mount: 269 g (9.5 oz) With 20 wedge mount: 308g (10.9 oz) Polycarbonate,aluminum alloy Flat wall mount: aluminum alloy 20 wedge mount: polycarbonate 5 MP CMOS sensor Fixed focal length H: 138, V: 114, D: 155 Built-in IR LED illumination and IR cut lter H.264 30 FPS 1600 x 1200 (4:3) Ambarella advanced image processing SoC 512 MB UniFi Protect 802.11a/b/g/n/acWi-Fi Bluetooth 5.0 256 MB 10VA 8-24VAC, 2.5A max.,50/60 Hz USB-Cpower cable, 5VDC, 2A Link/activity LED Yes 2 of 3 Operating temperature

-10 to 40 C (14 to 104 F) Button Mounting Operating humidity Certications Audio Microphone Speaker Software Controller Software Mobile Apps Factory reset Flat wall, 20 wedge (kits included) 0 to 90% noncondensing FCC, IC, CE Yes (can be disabled in software) Yes UniFi Protect UniFi Protect iOS and Android Specifications are s ubjec t to c hange. Ubiquiti products are sold with a limited warranty described at: www.ui.com/support/warranty 2021 Ubiquiti Inc. All rights res erved. Ubiquiti, the Ubiquiti U logo, UniFi Protect, and UniFi are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries . Android is a trademark of Google LLC. All other trademarks are the property of their respective owners. Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi-

tions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. This radio transmitter FCC ID: SWX-UVCG4DP has been approved by FCC. ISED Canada CAN ICES-3(B)/NMB-3(B) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter (IC: 6545A-UVCG4DP) has been approved by ISED Canada. CAN ICES-3(B)/NMB-3(B) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. lappareil ne doit pas produire de brouillage;

2. lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le prsent metteur radio (IC: 6545A-UVCG4DP) a t approuv par ISDE Canada. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. Les antennes utilises pour ce transmetteur doivent tre install en considrant une distance de sparation de toute personnes dau moins 20 cm et ne doivent pas tre localis ou utilis en conflit avec tout autre antenne ou transmetteur.

4 Download on the

@ App Store GET IT ON

> Google Play UniFi Protect v 1 e:id0

NS 2 x

id 0 UniFi Protect UI Support Get Answers help.ui.com FRONT TRANS REAR

RF_160, Issue 04 Cerpass Technology Corporation No.10, Lane 2, Lianfu Street, Luzhu District Taoyuan City Taiwan R.O.C. Ubiquiti Inc. 685 Third Avenue 10017, New York USA Declaration of Authorization We Name:

Address:

City:

Country:

Declare that:

Name Representative of agent: Nina Hsu (1) Agent Company name:

Address:

City:

Country is authorized to apply for Certification of the following product(s):

Product description: UniFi Protect G4 Doorbell Pro Type designation: UVC-G4 Doorbell Pro Trademark:

Validity/ expiry date on our behalf. Date:

City:

Name:

Function:

Compliance Manager June 23, 2021 Mark Feil (2) UBIQUITI New York

. Signature:

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

FCC, Request for non-disclosure RF_501, Issue 7 Date: 19-Oct-10 Page 1 of 1 Company Name: Ubiquiti Inc. Address:

City:

Country:

685 Third Avenue 10017 New York USA Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands To: Telefication B.V., Dept. FCC TCB Subject: Request for confidentiality FCC ID: SWX-UVCG4DP Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

Internal Photos Users Manual Test Set-up Photos External Photos Justification: For marketing purpose Planned Release Date STC: 180 days from the date of grant. (notes 2, 3, 4, 5). If no date is given, 45 days from grant date will be used. Name and signature of applicant: Mark Feil Date: June 23, 2021 Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period