FCC ID: SWX-UTPTM UniFi Talk Phone Touch Max

Datasheet UTP-TouchMax Phone Touch Max The UniFi Talk Phone Touch MAX incorporates Ubiquitis next-generation VoIP Phone technology. Designed to work with the UniFi Talk Controller, the UniFi Talk Phone Touch MAX is conveniently powered by 802.3at PoE+. It includes a 7" HD (1280 x 800) multi-touch screen, 5 MP camera, and is easy to setup with the UniFi Talk Controller. Mechanical Dimensions Weight Enclosure materials Colours Display Display size Resolution 254.6 x 135 x 182.5 mm (10 x 5.3 x 7.2") 1.52 kg (3.35 lb) Plastic, aluminum (base) Black White 178 mm (7") diagonal 1280 x 800 HD (16:10) Screen technology GFF multi-touch Video Camera sensor Resolution Audio Handset dynamic receiver Handset microphone Codec Hands-free speaker Hands-free microphone Hardware Processor Memory WiFi standards Power input 5 MP 2592 x 1944 16 ohm SPL 101 dB @1KHz, 30mW, 1cm Omnidirectional electret microphone SNR 70 dB Sensitivity -38 3 dB Standalone Hi-Fi audio codec IC Smart speaker amplier 4 ohm/PNOM 3W SPL 81dB @ 1W, 0.5m Dual omnidirectional MEMS microphones SNR 64 dB Sensitivity -26 dBFS Digital microphone Octa-Core ARM CortexA53 at1.8 GHz Storage: 32 GB RAM: 2 GB 802.11 a/b/g/n/ac USB-C 5VDC, 3A 802.3atPoE+

2 of 3 Power output Connectivity USB-C port (charging only)

(2) GbE RJ45 ports Bluetooth 4.2 WiFi 2.4G b/g/n, 20/40 MHz WiFi 5G a/n/ac,20/40/80 MHz Headset support 3.5 mm CITA audio jack Operating temperature 0to 40 C (32to 104 F) Operating humidity Certications NFC Reading range Standards Technology Software OS LED Audio DSP algorithm Protocol 10 - 90% noncondensing FCC, IC, CE Up to 10 mm (0.39") ISO 14443A, 14443B, 15693 NFC Tag 1, 2, 3, 4, 5 MIFARE Classic MIFARE Plus MIFARE Ultralight MIFARE DESFire EV1/EV2 Android 9 Power status: white glowing Active echo cancellation, noise suppression, blind source separation SIP/SDP/RTP/RTCP/VLAN/DHCP Number of supported phone lines Application Multiple UniFi Talk Minimum software requirements Web Browser (Chrome Recommended) Ubiquiti products are sold with a limited warranty desc ribed at: ui.c om/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or c lass actions . 2021 Ubiquiti Inc. All rights res erved. Ubiquiti, Ubiquiti Network s, the Ubiquiti U logo, UniFi, and UniFi Talk are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. All other trademark s are the property of their respective owners. 620-00836-02 FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users au-

thority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

"This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help."

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. ISED Canada CAN ICES-3(B)/NMB-3(B) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is sub-

ject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio ex empts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. lappareil ne doit pas produire de brouillage;

2. lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est suscepti ble den compromettre le fonctionnement. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. Les antennes utilises pour ce transmetteur doivent tre install en considrant une distance de sparation de toute personnes dau moins 20 cm et ne doivent pas tre localis ou utilis en conflit avec tout autre antenne ou transmetteur. the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems les dispositifs fonctionnant dans la bande de 5 150 5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux

Ubiquiti Inc. 685 Third Avenue, New York, New York 10017, USA DFS Device Declaration Letter To whom it may concern, We have declared below featured for FCC equipment authorization, Device FCC ID: SWX-UTPTM May 6, 2022

(1) DFS Device: Master Client with Radar detection capability Client without radar detection capability N/A

(2) Active / Passive Scanning, ad-hoc mode access point capability Frequency Band Active Scanning passive scanning Ad Hoc Mode or Access point

(MHz)

(the device can

(where the device WIFI Direct capability transmit a probe is can listen only capability

(beacon)) with no probes) 5150-5250 Yes , No Yes , No Yes , No Yes , No 5250-5350 Yes , No Yes , No Yes , No Yes , No 5470-5725 5725-5850 Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No

(3) Country code selection ability - Yes , No If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) ___________________________________________________________________________________ ___________________________________________________________________________________

(4) Meet 15.202 requirement- Yes , No Please check below:

A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply, No Apply, (If apply, please help to provide explanation on it was implement, and how software was controlled) Sincerely, Mark Feil Ubiquiti Inc. Compliance Manager compliance@ui.com