Datasheet UNMS-R-ProDatasheet UNMS-R-Pro UNMS Router Pro UNMS-R-Pro is a high-performance router with (2) high-speed SFP+ and (9) Gigabit RJ45 ports. By default, it supports dual-WAN ports: (1) 10G SFP+ and (1) Gigabit RJ45 and features built-in switching on (8) Gigabit RJ45 ports. Use the Ubiquiti Network Management System (UNMS) for centralized control and monitoring of all UNMS devices. Mechanical Dimensions 210.4 x 140.2 x 43.7 mm (8.28 x 5.52 x 1.72") Weight 1.45 kg (3.2 lb) Enclosure Material SGCC Steel Hardware Networking Interfaces
(8) 10/100/1000 Mbps RJ45 LAN Ports
(1) 10/100/1000 Mbps RJ45 WAN Port
(1) 1/10 Gbps SFP+ LAN Port
(1) 1/10 Gbps SFP+ WAN Port Management Interface Ethernet In-Band Bluetooth BLE Processor Quad ARM Cortex-A57 Core at 1.7 GHz System Memory 4 GB DDR4 On-Board Flash Storage 16 GB eMMC Power Method
(1) External AC/DC Adapter
(1) UNMS Connector DC Input Power Supply 24VDC, 2.5A Power Adapter (Included) Supported Voltage Range 24 - 28VDC Max. Power Consumption 30W ESD/EMP Protection Air: 15 kV, Contact: 8 kV Operating Temperature
-5to 50 C (23 to 122 F) Operating Humidity 5 to 95% Noncondensing Certications CE, FCC, IC LEDs System Status RJ45 Data Ports Speed/Link/Activity SFP+ Data Ports Speed/Link/Activity Specications are subject to change. Ubiquiti products are sold with a limited warranty described at: www.ui.com/support/warranty 2020 Ubiquiti Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UNMS are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. All other trademarks are the property of their respective owners. FCC & IC Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Operation of this device is subject to the following conditions:
1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired opera-
tion. Lexploitation est autorise aux deux conditions suivantes:
1. lappareil ne doit pas produire de brouillage;
2. lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement.
"This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.
- Consult the dealer or an experienced radio/TV technician for help."
"IMPORTANT NOTE:
Radiation Exposure Statement:
-This equipment complies with radiation exposure limits set forth for an uncontrolled envi-
ronment.
-This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
-This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. AVIS IMPORTANT:
Dclaration sur lexposition aux rayonnements:
-Cet quipement est conforme aux limites prvues pour lexposition aux rayonnements dans un environnement non contrl.
-Lors de linstallation et de la mise en fonctionnement de lquipement, assurez-vous quil y ait une distance minimale de 20 cm entre llment rayonnant et vous.
-Cet metteur ne doit tre install proximit daucune autre antenne ni daucun autre metteur, et ne doit tre utilis conjointement aucun autre de ces appareils. Hereby, Ubiquiti Inc. declares that this radio equipment device is in compliance with Direc-
tive 2014/53/EU, 2014/30/EU & 2014/35/EU. The full text of the EU declaration of conform-
ity is available at the following internet address: ui.com/compliance European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative con-
sequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local au-
thorities, waste disposal service, or the shop where you purchased the product."