User Manual for ADIBOT-A USER MANUAL AI Fearless | Clean Endless 1 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A CONTENTS CONTENTS ...................................................................................................................................... 2 Preface............................................................................................................................................... 4 Part I Product Overview .................................................................................................................... 6 1.1 Packing List......................................................................................................................... 6 1.2 Product Overview ............................................................................................................... 7 1.3 Product Specifications ....................................................................................................... 10 Part II Safety ................................................................................................................................... 13 2.1 General Rules .................................................................................................................... 13 2.2 Safety Precautions ............................................................................................................. 15 2.3 Warning Sign ..................................................................................................................... 15 2.4 Charging Indicator ............................................................................................................ 16 Part III Device Operations .............................................................................................................. 17 3.1 Power on/off ...................................................................................................................... 17 3.1.1 Power-on ................................................................................................................ 17 3.1.2 Power-off ................................................................................................................ 18 3.2 Install the Charging Dock ................................................................................................. 18 3.3 Charging ............................................................................................................................ 18 3.4 Hand Push Function .......................................................................................................... 24 3.5 Disinfecting Process .......................................................................................................... 24 Part IV Functions of Tablet PC Software ........................................................................................ 24 4.1 User Login......................................................................................................................... 24 4.1.1 Login ...................................................................................................................... 25 4.2 Robot Settings ................................................................................................................... 26 4.2.1 Network Settings .................................................................................................... 26 4.2.2 Volume Settings...................................................................................................... 30 4.2.3 Language Settings .................................................................................................. 30 4.2.4 Safety Sign Settings ............................................................................................... 31 4.2.5 Server Settings ....................................................................................................... 32 4.2.6 Version Information Display .................................................................................. 33 4.2.7 Reset to Factory Settings ........................................................................................ 33 4.3 Disinfection Task .............................................................................................................. 34 4.3.1 Creating Disinfection Task ..................................................................................... 34 4.3.2 Disinfection Detailed Information ......................................................................... 36 4.3.3 Executing Disinfection Task .................................................................................. 36 4.4Aoubt Me ........................................................................................................................... 37 4.4.1 Room Manegement ................................................................................................ 38 4.4.2 System Settings ...................................................................................................... 40 Part V Transportation, Unpacking, Cleaning, and Storage ............................................................. 42 5.1 Packing and Transportation ............................................................................................... 42 5.2 Unpacking ......................................................................................................................... 43 5.2.1 Opening the Package .............................................................................................. 43 2 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 5.2.2 Installing UVC Lamp ............................................................................................. 43 5.3 Maintenance and Cleaning ................................................................................................ 44 5.3.1 Cleaning the Robot ................................................................................................. 44 5.3.2 Cleaning the Adapter .............................................................................................. 45 5.3.3 Cleaning the Lamp Tubes ....................................................................................... 45 5.4 Storage Instructions ........................................................................................................... 45 Part VI Application Scenarios ......................................................................................................... 46 Part VII FAQs/Troubleshooting ...................................................................................................... 47 Part VIII Declaration of Conformity49 3 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Preface Thank you for purchasing ADIBOT-A equipment from UBTECH Robotics Corp. This user manual is only applicable to the operation of ADIBOT-A. In order to ensure safe use of ADIBOT-A and quickly grasp the usage method,please read this ADIBOT-A, robot, and it mentioned in this manual refer to the ADIBOT-A robot, and This manual is for user's reference and guidance only, and the description may not be detailed enough. If you encounter any problems that can not be solved, please contact UBTECH for manual carefully. you refers to the user. technical support. This manual will be updated from time to time, and the latest user manual will add the latest content and pictures without further notice. The functions of Wireless Access Systems including Radio Local Area Networks(WAS/RLANs) within the band 5150-5350 MHz for this device are restricted to indoor use only within all European Union countries
(BE/BG/CZ/DK/DE/EE/IE/EL/ES/FR/HR/
IT/CY/LV/LT/LU/HU/MT/NL/AT/PL/PT/RO/SI/SK/FI/SE/TR/N O/CH/IS/LI/NI). 4 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Disclaimer Failure or damage caused by the user not following the method described in the operating ins tructions. Failure or damage caused by the repair being operated by a non designated service organization. Failure or damage caused by unauthorized modifications of parts and circuits of this product. Failure or damage caused by force majeure factors (such as fire, earthquake,weather, etc) . Failure and damage caused by using a non-designated power supply (voltage or frequency) or abnormal voltage. Failure and damage caused by using a non-specified charging dock or charging cable. 5 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Part I Product Overview 1.1 Packing List a b c d f. User Manual*1 e f g h i j k b. c. i. j. 1. Packing list a. Robot Body*1 Protective Cover*1 Safety Sign*1 d. Charging Dock*1 e. Power Adapter*1 g. Dosimeter card*10 h. UVC goggle*1 USB Dongle(4G)*1 Tablet PC*1 k. 3*50mm Cross Screwdriver*1 2. List of self-provided materials a. USB 4G SIM Card*1 b. Eight AA batteries*1 a b 6 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 1.2 Product Overview ADIBOT-A adopts the strongest ultraviolet sterilization band 253.7nm. It destroys the gene structure of pathogens to deprive their reproductive capacity and make them lose infectivity. Strong irradiation can eliminate more than 99.99% of harmful pathogens, including COVID-19 virus, SARS virus, fungi, and bacteria. 7 / 50 Shenzhen UBTECH Robotics Corp Ltd. Hand Pusher Reflector 1. Front View Indicator HD Camera LIDAR Sensor Ultrasonic sensor 2. Rear View PIR Sensor ON/OFF Debug Interface Warning Sticker Air Vent Omni-Directional Wheel User Manual for ADIBOT-A Lidar Sensor Sensor RGBD TOF Camera UVC Lamp UVC Lamp Speaker Anti-Collision Bar Antenna Emergency Button USB Dongle(4G) Power Cord Port Network Settings Button Infrared Receiver 8 / 50 Shenzhen UBTECH Robotics Corp Ltd. Charging Copper Sheet Hub Motor LED Indicator HALL Sensor User Manual for ADIBOT-A 3. Bottom View Infrared Sensor Omni-Directional Wheel Magnetmeter 4. Charging Dock Radar Identification Board Infrared Transmitter Electrode Contactor Charging Port Front View 9 / 50 Back Elevation Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 1.3 Product Specifications Chinese Abbreviation ADIBOT () English Abbreviation ADIBOT-A Basic Parameters Product Model Product Design Product Color Product Size Package Size ADAA201 Mobile tower-type robot, with lamp Set on the flanks Grey lower body and stainless steel armrest 555(L) * 609(W) * 1725(H) (mm) 780(L) * 840(W) * 1880(H) (mm) Product Weight 79kg Gross Weight of Product 160 kg(including the packing box) Tablet PC Lenovo Tab M10 FHD Plus Working Temperature 0 to 40 (for indoor use only) Working Humidity 10% to 85% (for indoor use only) Storage Temperature
-20~60 Storage Humidity 95%
Bactericidal Factor UVC(ultraviolet ray) After-sales Service 1-year warranty, 2-
year extended warranty can be purchased Acoustic Equipment amplifier speaker*2 Acoustic Equipment Power 6W*2 UVC Lamp Disinfecting Lamp UVC lamp 1 * 8+UVC lamp 2 * 8 Radiation Wavelength 253.7nm Irradiation Intensity of Lamp 1 141W/cm Power of Single Lamp 1 41W 10 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Power of Single Lamp 2 14W Irradiation Intensity of Lamp 2 40W/cm Length of Lamp 1 Life of Lamp 1 Length of Lamp 2 Life of Lamp 2 Total Power of Lamps Main Chip and Memory 851mm 12000h 295mm 12000h 440W 8G 64G Operating System Ubuntu 18.04 Intel X86 processor 2.4GHz/5GHz 802.11b/g/n/ac Bluetooth 5.1 Battery Type Lithium iron phosphate Battery Disinfection Duration About 5H (in-place disinfection) CPU RAM ROM Network WiFi Bluetooth Battery Battery Capacity Charging Duration Input Voltage Output Voltage Frequency Output Current Motion Capability Move Mode Turn Mode 11 / 50 24V100AH About 3.5 H AC100-240V DC29.2V 50/60Hz 30A Forward Spin turn supported Number of Chassis Wheels 2 driving wheels + 2 driven wheels Obstacle Clearing Capability 7mm Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Ditch Crossing Capability Climbing Height Ground Friction Coefficient 2cm 5 0.5 12 / 50 Shenzhen UBTECH Robotics Corp Ltd. Please read the following information carefully. Any direct or indirect losses caused by the unnormal User Manual for ADIBOT-A Part II Safety 2.1 Gerneral Rules operation of the product will not be beared. Cautions operating the robot. To ensure safety, you are strongly recommended to follow the safety rules below when We do not guarantee that the manual covers all the possible circumstances. Please operate the product carefully and ask UBTECH technical suport for help if not familiar with the operation. ADIBOT-A is equipped with multiple safety sensors that can ensure safe operation. They work in parallel to minimize risks to r others Please do not use the robot to perform any operations related to personal safety. Please keep children under 6 years old far away from ADIBOT-A. Please keep any other persons , animals and plants far away from ADIBOT-A. 2.2 Safety Precautions Danger Warning Caution Notification 13 / 50 Danger is a situation that will cause very serious injuries if not being avoided. Warning is used to indicate a dangerous situation,which may cause severe injuries if not being avoided. Caution is used to remind you of a dangerous situation,which may cause minor or moderate injuries if not being avoided. Notification is used to indicate the safety practice that is not harmful to human body such as maintenance informations which may cause the robot damaged. Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Danger Do not touch ADIBOT-A when it is working, unless emergency circumstances. Do not put your toes into the chassis of ADIBOT-A, which may damage your toes. Do not stare at a turned-on UVC lamp for a long time,for the UV light may burn your skin and eyes, which may cause temporary blindness. Do not allow ADIBOT-A to be used in areas with incline, cliff or ladder. Do not allow any other substances fall into the gap of the robot, which may cause an electric shock or short circuit fault. When ADIBOT-A is operating, do not stand in a place directly exposed to UVC light
(unless you are wearing qualified protective clothing). Standing there might hurt you. Warning Please make sure that ADBOT-A is operated by professional and technical personnel or those Please avoid any other substances fall into the gap of the robot, which may cause an electric who are familiar with the product. shock or short circuit fault. Please keep ADIBOT-A dry,and prevent it from being operated in a humid environment, that can prevent the camera of the robot body from coming into contact with substances such as oil, steam, water vapor, moisture and dust. The normal operating humidity range of ADIBOT-
A is 10% to 85%. Please keep ADIBOT-A away from open fire and heat sources, for the purpose of avoiding direct sunlight, which may damage the imaging sensor of the camera,lidar and other sensors . For the normal operating temperature range of ADIBOT-A is 0 to 40C (32 to 104F). Please do not cover any sensor of the product, which can affect the normal operation of its sensor. Please do not use irritating detergent or organic solvent to wipe the camera lens. Please make sure that all the maintenance operations be performed under the guidance or supervision of a technician of ADIBOT-A. Cautions Please do not lean on ADIBOT-A. The ADIBOT-A ultraviolet sterilization lamp produces very little ozone during use, but the ozone concentration is harmless to human body. Please choose a three-phase plug to reduce the risk of electric shock. Please press the emergency button if your robot is out of control. 14 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Please make sure that ADIBOT-A is used indoors only. Please do not allow ADIBOT-A to be used on sloping areas. Please ask assistance to help pass when the ground bulge is higher than 5mm, the free push of Please dispose any broken lamp according to the local laws and regulations based on mercury Adibot-A is easily blocked. which is in the lamps. If ADIBOT-A failed to operate normally, especially when you detect unusual sound, smell, or smoke. Please take protection measures, and immediately press the emergency button, turn off the power supply of the robot, unplug the power cord, and contact the ADIBOT-A technical support for help. Please be sure to stick a geomagnetic stripe near the area where the robot may falling. Battery Safety Alerts:
Risk of explosion if the battery is replaced by an incorrect type. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, t hat can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment that can result i n an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that may result in an explosion or a leakage of flammable liquid or gas. 2.3 Warning Sign 15 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 2.4 Charging Indicator The lamp signals of different colors provide the operator effective status indication of the robot. You can indicate the various states of the robot through the indicator light. Body Lights Status LED Status Normally on in white Normal operation White breathing Standby mode Normally on in blue In disinfection with lights on Blue breathing In disinfection task Normally on in green Charge finished Green breathing In charging Normally on in red Robot status abnormal Flashing red Red Breathing Emergency button pressed Low battery reminder 16 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Part III Device Operations 3.1 Power on/off 3.1.1 Power-on Power Button Steps:
Step 1. Press the power button (Figure 3.1.1.a) on the chassis;
Step 2. Press and hold the On/Off button (Figure 3.1.1.b) on the back for 3 seconds to start the robot. Cautions:
1. Perform step 1 only if the power button is turned off, i. e. for first time use;
2. If the power button is turned on, just go to step 2. Figure 3.1.1.b Figure 3.1.1.a ON/OFF 17 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 3.1.2 Power-off Steps:
Step 1: Press and hold the On/Off button (Figure 3.1.1.b) on the back for 3 seconds to shut down the robot;
Step 2: (If the product will be used in a long time) Press the power button (Figure 3.1.1.a) on the chassis to turn off the power supply. Cautions:
1. Decide whether to turn off the power supply according to the actual situation;
2. It is strictly forbidden to Shut down the robot by perform step 2 before step 1, as it may damage the robot. 3.2 Install the Charging Dock Cautions:
1. Plug the charging cable into the dock and keep the back of the robot against a wall. 2. Place the charging dock on a dry and flat ground and beside a wall where few people pass by. 3. We highly recommend that no obstacles within 2m in front and 1m on the left and right of the charging dock. Charging Dock Lights Status LED Status Green light for a long In charging Red light for a long Waiting for charge Red lamp flashing Charging Dock abnormal Figure 3.2 3.3 Charging 1. Method 1: You can select a suitable power adapter and insert it into the charging port of the robot straightly(Figure 3.3.a). 18 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 2. Method 2: You can insert the adapter into the charging dock (with the alignment of the positive and negative poles), which allowing the robot to be charged on the dock (Figure 3.3.b). Figure 3.3.a Figure 3.3.b Figure 3.3.c 19 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 3. Adapter Lights Status LED Blue lights flashing Status In charging Green light for a long Charging finished/standby Red lamp flashing Charging abnormal 3.4 Hand Push Function The chassis motor is locked by default and the robot cannot be moved even the power is on. To push the robot, you should double press the On/Off button in a second of time when the robot is powered off (Figure 3.4) to unlock the robot chassis, and then push the robot when the robot is powered on. Figure 3.4 ON/OFF 3.5 Disinfecting Process ADIBOT-A is intended to function as a supplement of routine disinfection and should not be considered as a substitute for usual disinfection equipment. Standard processures need to be carried out simultaneously with the deployment of ADIBOT-A and also ensure that ADIBOT-A has been set correctly before use to maximize the disinfection effect. To help you get started quickly, please follow the instructions below:
Step 1 Perform basic cleaning and maintenance operations for the robot. (Refer to section 5.3 for the specific operations.) Make sure that the emergency stop button has not been pressed before starting the robot. 20 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Step 2 Manage the room requiring disinfection, and then deploy ADIBOT-A to start disinfection. Cautions:
the door. Plese clean up any inflammable and explosive objects and paper to prevent a fire caused by high temperature on the surface of UV lamp, Please move away plants and animals in case the UV lamp can kill organic cells. Please make sure that the target place or object can be exposed to ultraviolet light. If any furniture in the room is moved, a new round of disinfection will then be needed. Step 3 Place the robot at the disinfection position in the room and the safety sign in front of Please ensure that all the other doors and of the disinfection room is closed and all windows are Caution: The robot will return to the charging dock automatically after finishing the disinfection if Step 4 Select the in-place disinfection/auto-exploration disinfection solution (Refer to section closed before starting disinfection. it was started at the dock. 4.3.1 for details). Step 5 After you tap to start disinfection on the tablet, ADIBOT-A will notify that ready for disinfection, please leave as soon as possible and counting down in seconds. Be sure to leave the disinfection site within the specified time to avoid being injured. 21 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A If the robot automatically starts the safe disinfection mode: Both the PIR sensor and the safety Figure 3.5.a sign will be working. To suspend disinfection halfway, tap Suspend task, the robot will turn off the UV lamp and stop the disinfection task.If someone breaks into the room, the safety sign and PIR sensor will trigger the command for suspending the disinfection task. To end disinfection halfway, tap End task, the robot will turn off the UV indicator and end the Figure 3.5.b disinfection task. 22 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Figure 3.5.c Step 6 After disinfection, use the hand pusher (Refer to section 3.4 for details) to move to the next target room; or to shut down the robot, perform the power-off operation (Refer to section 3.1.2 for details), and then store the robot.. 23 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Part IV Functions of Tablet PC Software 4.1 User Login of the software:
No. 1 The tablet PC software is a system for the administrator to check and operate the robot after the robot is connected. It is used by the robot administrator. The table below shows the basic functions 2 Robot settings Safety sign settings Replace/match the safty sign Main Function Description User login Login Input the enterprise number, Username, and Password Network settings 4G inside the robot body or WiFi Volume settings Set the robot's volume Language settings Set the robot to broadcast in both Chinese and English in Server settings The server address needs to be synchronized when the robot is initialized and activated Version Information display Input the ip address of the server to init and active the robot Create disinfection task Create disinfection tasks and set the disinfection time Fixed point disinfection In-place disinfection at the fixed point 3 Disinfection tasks Auto-exploration disinfection Perform auto-exploration disinfection in an enclosed space Disinfection detail page Execute disinfection task Display details of the disinfection task Start, suspend, or end the task Display the name, current battery level, and total disinfection records of robot 4 Robot Robot status 24 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Security policy Task list The latest task and historical task record Intrusion detection by the safety sign Detect intrusion once the safety sign is moved PIR intrusion detection Detect human intrusion in the static disinfection status Robot self-check Sensor exception and data exception Routine maintenance Reset to factory settings Reset to factory settings 5 6 4.1.1 Login 1. Open the tablet, click application to go to the login page,then click advanced settings to change the Server Address or input the server ip(contact the after-sales to get the server ip address), select the language (Chinese/English), input the Company Name, the Username and Password. 2. Click Login to enter the homepage of the robot, and you will get the serial number and status of the robot bound under the current enterprise number. Figure 4.1.1a 25 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 4.2 Robot Settings 4.2.1 Network Settings Figure 4.1.1b 1. Tap the setting button in the upper right corner to enter the setting interface, then tap Network to set the network. Figure 4.2.1a 26 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 2. Turn on the robot. About more details, please refer to section 3.1.1. 4G network mode (A 4G card that can access Internet need to be prepared ) 4G first if the robot needs the 4G. i Figure 4.2.1b How to install the 4G network card:
1. Open the back cover of the 4G network card, and insert the 4G Micro SIM network that can access Internet into the PC, as shown in Figure 4.2.1b. You can first insert network card into the OC. When the 4G network card in the USB port changes from red indicator to blue indicator flashing every 2 seconds, you can confirm that the 4G network card can connect to Internet provided that the PC can access the Internet normally. 2. Use a screwdriver to unscrew the back cover of the robot debug interface, open the back cover, Figure 4.2.1c and insert the 4G network card into the robot, as shown in Figure 4.2.1d. 27 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A USB 4G Card Slot Figure 4.2.1d WiFi network mode If the robot has no 4G network, select WiFi first, tap Connect/Switch WiFi, turn on the mobile phone/tablet Bluetooth, power on the robot as prompted, and long press the network settings button for 3 seconds to set the network. 4.2.1e 28 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 4.2.1f 3. The App sends the WiFi SSID and password, and the robot connects to the network. If the WiFi connection fails, check whether the WiFi information is correct and keep the WiFi device close enough to the robot. 4.2.1g 29 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Cautions If Bluetooth pairing recognition fails, please check the following items:
1. Check whether the tablet PC/mobile phone Bluetooth is turned on; 2. Check whether the positioning switch is turned on. Figure 4.2.1g 4.2.2 Volume Settings Tap the setting button and select Voice announcement volume to adjust the volume. Figure 4.2.2 30 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 4.2.3 Language Settings Set the language for the robots voice announcement. Chinese and English are available. 4.2.4 Safety Sign Settings Figure 4.2.3 To bind/replace a safety sign, you can bind the target/new safety sign. When the robot is delivered from the factory, the matched safety sign will be bound by default. To replace the safety sign, first tap Unbind, tap Add to turn on the safety sign switch, and then enter the serial number of the safety sign. Figure 4.2.4a 31 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Figure 4.2.4b 4.2.5 Server Settings Tap server, turn on the tablet PC/mobile phone Bluetooth, press the network settings button of the robot and hold it above 3s for Bluetooth pairing. After the Bluetooth is paired successfully, it will automatically connect to the server. Figure 4.2.5a 32 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 4.2.6 Version Information Display Figure 4.2.5b Tap Version number to view the software version information of the current robot. Figure 4.2.6 4.2.7 Reset to Factory Settings Tapping Reset to factory settings and restore to the system status before delivery. 33 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Figure 4.2.7 4.3 Disinfection Task 4.3.1 Creating Disinfection Task A. In-place disinfection solution:
Advised disinfection time:
Area 50m 50mArea90 m
(it is preferred to place the robot in the center of the disinfection space.) Disinfection time5min Disinfection time10min Tap RobotCreate disinfection task +, and then select In-place disinfection. 34 / 50 Figure 4.3.1a Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A B. Auto-exploration disinfection Advised disinfection time:
Area 50m 50mArea90 m
(it is preferred to place the robot in the center of the disinfection space) Disinfection time5min Disinfection time10min Tap RobotCreate disinfection task +, and then select Auto-exploration disinfection. Figure 4.3.1b Cautions The robot will judge whether the site is suitable for auto-exploration disinfection after performing preliminary exploration. If not, it will prompt that this room is not suitable for auto-exploration disinfection, please select other modes for disinfection. You can tap Forced disinfection to continue with auto-exploration disinfection. 35 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 4.3.2 Disinfection Detailed Information Figure 4.3.1c After a disinfection starts, the page will display details of the disinfection task. Figure 4.3.2 4.3.3 Executing Disinfection Task You can start a task, suspend a task (active or passive), or end a task. 36 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Figure 4.3.3a Figure 4.3.3b 4.4 About Me Tap Me to enter the Me page of the App. 37 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Figure 4.4 4.4.1 Room Management 1. Tap Room Management+ in turn to create a new area name. 2. To change the room name, tap the changing sign. Figure 4.4.1a 38 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Figure 4.4.1b 3. To delete a single room, slide leftward on the room number to delete and tap Delete. 4. To batch delete multiple rooms, directly tap Delete in the upper right corner, tap to check the rooms that need to be deleted, then tap Select All and tap OK to delete the selected room numbers. Figure 4.4.1c 39 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Figure 4.4.1d 4.4.2 System Settings 1. Tap System Settings to enter the system settings interface of the App to complete relevant settings. 2. After entering System Settings, you can select or English as a system language. Figure 4.4.2a 40 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Figure 4.4.2b 3. After entering System Settings, you can view the version number of the current App. Figure 4.4.2c 41 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Part V Transportation, Unpacking, Cleaning, and Storage 5.1 Packing and Transportation If you need to transport ADIBOT-A, disassemble the lamps from the robot, put them into the special cylindrical packing box provided in the sale package, and then put ADIBOT-A into the packing box for transportation. Check whether the package is damaged before using ADIBOT-A. If so, please contact UBTECH by emailing to adibot.service@ubtrobot.com Please follow the instructions below to unpack the ADIBOT-A:
5.2 Unpacking 5.2.1 Opening the Package 1. Stand the box upright and remove the all packagesl 3. Take out the charger , safety sign , and accessory bag 5. Push out the robot from the packing box 42 / 50 Shenzhen UBTECH Robotics Corp Ltd. 2. Take out the lamps 4. Remove the two pieces of foam in the front 6. Remove the upper inner foam to take out the charging dock User Manual for ADIBOT-A Cautions:
3. UVC lamps. 1. Put the foam and other packing materials back into the packing box, and keep the 2. 5.2.2 Installing UVC Lamp packing box dry for next use. If you need to transport ADIBOT-A to another place, put the safety sign of ADIBOT-A and its accessories back to the packing box as original. 1. Please make sure the power is off and the charging cable is unplugged before installing the 2. Insert the lamp holder (for the end without pins) into the top socket of the ADIBOT-A frame. 3. Press down the lamp holder (for the end with four pins) by aligning it with the four pin holes on the ADIBOT-A base, ensuring that the four pins are fully inserted into the socket. 4. Repeat the above steps until all the 16 UVC lamps are properly installed around the ADIBOT-
A base. End without pins End with four pins End without pins End with four pins Caution: If the four pins are not aligned and cannot be inserted downward for connection, rotate the UVC lamp by 90 horizontally before inserting the pins downward, ensuring that the alignment between the pins and the socket holes matches. 43 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 5.3 Maintenance and Cleaning Cautions:
1. Do not use abrasives, aerosols, liquid containing alcohol or any other liquids to clean ADIBOT-
A because of the uncertainty that whether the liquids contain flammable substances that may damage the plastic cover of ADIBOT-A. 2. Do not use water or any other liquids to spray or drench ADIBOT-A. Keep it dry because of the self-cleanning function of the product. Do not use irritating detergent or organic solvent to wipe the camera lens. 3. Please only use soft microfiber sheets to clean up the dust from the camera and sensor. 4. Do not clean the reflectors behind the lamp in case of being scratched. 5. If the robot is found damaged, or with abnormal sound, or failed to operate normally, please contact the local constumer service. 5.3.1 Cleaning the Robot Follow the instructions below to operate safely and avoid damaging the robot:
1. Press the power button on the chassis to power off the robot. 2. Disconnect the charging cable from ADIBOT-A, and ensure that the robot is completely powered off. 3. Check whether the lamp is damaged. If not, then move to the next steps. 4. Use a soft wet sheet to clean the outside of the robot. 5. Use a soft dry sheet to wipe dry the outside of the robot. 6. Check whether the robot has been wiped dry. Warning 1. Please clean up the dust which affect normal operation on the camera and sensor. 2. Once a lamp is broken, ventilate the room for 20 minutes, and then dispose of the glass fragments. In this way, the gas in the lamp will not be inhaled into human respiratory tract. 44 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A 5.3.2 Cleaning the Adapter If dust adheres to the adapter:
1. Remove the adapter plug from the wall socket. 2. Check whether the adapter is dry. 3. Use a soft dry sheet to clean the charging cable and the adapter. 5.3.3 Cleaning the Lamp Tubes Method and Steps:
1. Before cleaning the lamps, make sure that the robot is completely powered off. Turn off the ADIBOT-A power button, and unplug the charging cable. 2. First put on cotton fibre-free protective gloves which will avoid leaving hand print or sweat on the UV lamps during cleaning. 3. Remove the UV lamps from ADIBOT-A after the UV lamps are cooled naturally. 4. Clean the lamp surface carefully and gently by using the designated alcohol cleaning cotton. 5. Turn over the lamp and clean the order side in the same way. 6. Replace alcohol cotton to wipe and clean the lamp tubes twice or more. 7. Check whether the UV lamp glass is transparent to make sure it is in good condition. 8. nslucent. Free of stains and hand prints. 9. Install the lamp back into the ADIBOT-A holder and check for proper connection. 5.4 Storage Instructions Carefully follow the following steps to ensure safety and avoid damage to the robot. 1. Unplug the charging cable to disconnect the charging power, then press the bottom power switch button to turn off the total power supply of the robot. 2. Use the hand pusher to push ADIBOT-A to the storage area. 3. Please let the ADIBOT-A keep a best safe posture. 4. Please store the ADIBOT-A in a dry place without dust at a temperature of 0 to 40C (32F to 104F). 45 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Part VI Application Scenarios The ADIBOT-A robot has been on duty in public scenarios such as hospitals, schools, libraries, star hotels, and metro stations, ect. Which is suitable for all surface disinfection and air disinfection. Hospital Scenario School Scenario Library Scenario Hotel Scenario Metro Scenario Cautions:
not be able to pass. keep the ground flat. 1. Please do not allow the robot work in the area with channel less than 90cm, or the robot may 2. Please do not allow the robot work in the area with cliffs and stairs, it may fall. 3. Please do not allow the robot work in the area with stairs and grooves more than 7mm ,and 4. Please do not allow the robot work in the area with overhanging cables. 46 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Part VII FAQs/Troubleshooting No. Symptom Solution Check whether the charging plug on the chassis is loose. ADIBOT-A failed to Check whether the power button on the chassis is turned on. If the problem persists, contact the ADIBOT-A Technical Support Center. installed properly. Stop the disinfection task first, and check whether the lamps are Check whether the full power mode is enabled. Replace the lamp that cannot light up. If the problem persists, contact the ADIBOT-A Technical Support Center. 3 The robot chassis Shutdown and restart the robot Make sure that the Bluetooth function is enabled on the tablet PC. Make sure that the positioning function is enabled on the tablet PC. 5 A WiFi connection Check whether the WiFi password is correct. Make sure the robot is close enough to the WiFi device. 47 / 50 Shenzhen UBTECH Robotics Corp Ltd. start. 1 2 Partial of none of the UV lamps was on after the robot was turned on and a disinfection command was sent. can not move, or the motor overcurrent protection 4 Bluetooth cannot be recognized for pairing. failure prompted when you tired to connect to the internet. User Manual for ADIBOT-A 6 The robot failed to Check whether the network connected to robot is normal. Check whether the network of the tablet PC is normal. execute the task commands by the tablet. 48 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Part VIII Declaration of Conformity 7.1 FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the f ollo wing two conditions: (1) this device may not cause harmful interference, and (2) t his device must accept any interference received, including interference that may caus e undesired operation. Changes or modifications not expressly approved by the party responsible for co mpliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to prov ide reasonable protection against harmful interference in a residential installation. Thi s equipment generates, uses and can radiate radio frequency energy and, if not installe d and used in accordance with the instructions, may cause harmful interference to radi o communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the rec eiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. 7.2 FCC Radiation Exposure statement This equipment complies with FCC radiation exposure limits set forth for an unco ntrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be coloc ated or operating in conjunction with any other antenna or transmitter. 49 / 50 Shenzhen UBTECH Robotics Corp Ltd. User Manual for ADIBOT-A Shenzhen UBTECH Robotics Corp. HQ in China: Floors 16 and 22, Building C1, Nanshan Wisdom Park, 1001, Xueyuan Avenue, Nanshan District, Shenzhen USA Branch: 767 S.Alameda Street, Suite 250, Los Angeles, CA 90021 Manufacturer: UBTECH (Shenzhen) Robotics Corp. Address of Manufacturer: Floors 1 and 2, Factory Building B, Huilongda Industrial Park, Shilong Community, Shiyan Neighbourhood Committee, Bao'an District, Shenzhen Official website: www.ubtrobot.com Service hotline: 400-6666-700 After-sales mailbox: support_mbu@ubtrobot.com 50 / 50 Shenzhen UBTECH Robotics Corp Ltd.