FCC ID: 2AHJX-RAD001 Sensor-controlled safety sign

UBTECH Sensor-controlled safety sign USER MANUAL Sensor-controlled safety sign USER MANUAL UBTECH ROBOTICS CORP LTD UBTECH Sensor-controlled safety sign USER MANUAL CONTENT CONTENT..........................................................................................................................................2 Introduction........................................................................................................................................ 3 Part 1 Product Overview................................................................................................................. 4 1.1 Package List....................................................................................................................... 4 1.2 Product View.......................................................................................................................4 1.3 System Framework........................................................................................................... 5 Part 2 Safety Information................................................................................................................ 5 2.1 Device Security.................................................................................................................. 6 2.1.1 General.................................................................................................................... 6 2.1.2 Operation Instruction............................................................................................. 6 Part 3 Device System Operation................................................................................................... 7 Part 4 Sensor-controlled safety sign Services.............................................................................7 4.1 Caution................................................................................................................................ 8 4.2 Switch.................................................................................................................................. 8 4.3 Intrusion detection and disinfection device state indicator......................................... 8 4.4 Sensor-controlled safety sign State Indicator............................................................... 9 4.5 Bluetooth pairing (Web)....................................................................................................9 Part 5 Transporting, Clean and Storage.....................................................................................10 5.1 Transportation.................................................................................................................. 10 5.2 Maintenance..................................................................................................................... 10 Part 6 Reference.............................................................................................................................11 6.1 Device Specification........................................................................................................11 6.2 Replacement Parts..........................................................................................................11 6.3 FAQ/Troubleshooting...................................................................................................... 11 Part 7 Declaration of Conformity..................................................................................................12 7.1 FCC compliance statement............................................................................................12 7.2 FCC Radiation Exposure statement.............................................................................12 UBTECH ROBOTICS CORP LTD UBTECH Sensor-controlled safety sign USER MANUAL Introduction Thank you for purchasing Sensor-controlled safety sign equipment from UBTECH ROBOTICS CORP LTD. This user manual is only applicable to the operation of Sensor-

controlled safety sign. In order to ensure safe use of Sensor-controlled safety sign and quickly grasp the usage method, please read this manual carefully. Children under 12 years old should use this product under the guidance of adults. This manual is for user's reference and guidance only, and the description may not be detailed enough. If you encounter problems that cannot be solved, please contact our company for technical support. This manual will be updated from time to time, and the latest user manual will add the latest content and pictures without further notice. The model approval code of this product is displayed in the form of "product nameplate label". The nameplate label is affixed to the lower part of the back of the robot. This product contains a wireless Bluetooth module. This module is an integrity module and has FCC certification. The model approval code is FCC ID: *****-RAD001. UBTECH ROBOTICS CORP LTD UBTECH Sensor-controlled safety sign USER MANUAL Part 1 Product Overview 1.1 Package List UVC Sensor-controlled safety sign (Door Sensor) *1 User manual *1 NOTE:

Sensor-controlled safety sign use AA battery *8 1.2 Product View FrontLED *2Caution Slogan UBTECH ROBOTICS CORP LTD UBTECH Sensor-controlled safety sign USER MANUAL BackPower On buttonMode button SideBattery cover 1.3 System Framework Part 2 Safety Information Please read the following information carefully, the company will not be responsible for direct or indirect losses caused by improper use of the product. Note: To ensure safety, it is strongly recommended that users follow the following safety regulations when operating the robot. This manual does not guarantee to cover all possible situations. The "ADIBOT" and "equipment" ("it", "its") referred to in this manual are Sensor-

controlled safety sign equipment, and "you" ("your") refers to the user. Note:

Please guardians to ensure that children under 6 years old stay away from Sensor-

controlled safety sign!

Please keep pets away from Sensor-controlled safety sign!

UBTECH ROBOTICS CORP LTD UBTECH Sensor-controlled safety sign USER MANUAL 2.1 Device Security 2.1.1 General If you have no experience in operating Sensor-controlled safety sign, you need to be especially careful. Because you may not be familiar with Sensor-controlled safety sign operation at first. Do not use robots to implement operations related to personal safety. 2.1.2 Operation Instruction If there is no emergency, it is recommended not to touch it while ADIBOT is Danger performing its task. Warning Please ask professional technical personnel or personnel familiar with product to operate Sensor-controlled safety sign. Do not insert any foreign objects into the gaps in the device, otherwise it may cause electric shock or short-circuit failure. Please keep Sensor-controlled safety sign dry, and avoid contact with oil, steam, water vapor, moisture, dust layer and other substances of the camera driven by the device. The normal working humidity range of Sensor-controlled safety sign is 10%-95%. The normal working temperature range of Sensor-controlled safety sign is 0-40 degrees Celsius (32-104 degrees Fahrenheit). Please keep Sensor-controlled safety sign away from open flames and heat sources, and avoid direct sunlight, so as not to damage the sensor. Do not cover its door sensor, otherwise it may affect the communication. All maintenance work should be carried out under the guidance or supervision of caution technicians. Attention When ADIBOT is working, please do not move the Sensor-controlled safety sign, so as not to affect the correct indication of the working state of the Sensor-controlled safety sign. UBTECH ROBOTICS CORP LTD UBTECH Sensor-controlled safety sign USER MANUAL If Sensor-controlled safety sign works abnormally, especially when you detect unusual sounds, smells or smoke, please take precautions and immediately turn off the power, remove the battery, and contact the technical support center. Part 3 Device System Operation When the disinfection equipment is worked indoors, the UV light will cause harm to the human body, so it is necessary to place the Sensor-controlled safety sign outside the room to warn the personnel not to approach. At the same time, as an accessory product, the Sensor-controlled safety sign needs to work with the disinfection equipment, which can intelligently feedback the various states of the disinfection equipment. Use the Sensor-controlled safety sign according to the following steps:

Step 1 Install 8*AA batteries Step 2 Place the Sensor-controlled safety sign at the door of the room to be disinfected, and turn on the Sensor-controlled safety sign switch Step 3 Through the web software to match the Sensor-controlled safety sign with the designated disinfected equipment Step 4 After disinfection, close the Sensor-controlled safety sign Part 4 Sensor-controlled safety sign Services Basic features No. Feature Description Caution Switch 1 2 3 Disinfection State Indicator UBTECH ROBOTICS CORP LTD Sensor-controlled safety signs are used to remind people not to enter the room to be disinfected Power on the Sensor-controlled safety sign Turn on Intrusion Detection Bluetooth pairing mode switch Indicate the status of disinfection device paired with the Sensor-controlled safety sign, Power on Detection switch Pairing switch State feedback UBTECH Sensor-controlled safety sign USER MANUAL Intrusion detection for example safety, fault and son on If any intrusion is detected through the movement and dumping of Sensor-controlled safety signs, the equipment shall be informed to stop disinfect in time Through the LED or buzzer to indicate the status of the Sensor-controlled safety sign itself, such as pairing, low power, etc Bluetooth pairing feature on Web Sensor-

controlled safety sign State Indicator Bluetooth pairing 4 5 4.1 Caution Alert people who want to enter the disinfection room with a striking Sensor-controlled safety sign "caution, UV infection do not enter!"

The size of the Sensor-controlled safety sign is "524 (L) * 322 (W) * 752 (H) mm", which can prevent people from bypassing the Sensor-controlled safety sign and entering the room to be disinfected; the Sensor-controlled safety sign is 2.2kg, and its weight can avoid shaking itself 4.2 Switch The Sensor-controlled safety sign has several switches, which are described as follows:

Sensor-controlled safety sign switch (toggle switch on / off). The switch of the main power supply of the Sensor-controlled safety sign. Power on after opening. At this time, the Sensor-controlled safety sign only indicates the status of the disinfection equipment that has been paired successfully Intrusion detection switch (tap switch mode) Press and hold for 3 seconds, and the buzzer will sound three times to turn on the intrusion detection. At this time, the Sensor-controlled safety sign has the ability to send touch alarm Long press for 3 seconds and the buzzer will sound to turn off the intrusion detection Paired mode switch (tap switch mode). Press three times continuously (interval <

0.5s), the pairing state, and the disinfection equipment will scan, select and match in the setting interface the Sensor-controlled safety sign will enter 4.3 Intrusion detection and disinfection device state indicator UBTECH ROBOTICS CORP LTD Intrusion detection. When the Sensor-controlled safety sign is detected to be moved, UBTECH Sensor-controlled safety sign USER MANUAL the disinfection equipment will be informed in time to stop disinfect. After the disinfection equipment stops disinfect, the status of the equipment will be fed back to the Sensor-controlled safety sign The disinfection equipment status includes the non safety state of normal operation of the disinfection equipment, the safe state after the disinfection equipment is shut down, the non safety state when the disinfection equipment fails, and the state of disconnection from the disinfection equipment Indicates the disinfection device status State LED Buzzer The disinfection equipment is in a safe state Disinfection equipment in disinfection state (unsafe) Disinfection equipment failure

(unsafe) Lost disinfection device connection, try to restore connection

Green LED long and bright Blue LED long and bright Red LED long and bright Orange LED long and bright Periodic every 5 seconds Periodic every 5 seconds sound, once sound, once 4.4 Sensor-controlled safety sign State Indicator In the Bluetooth pairing process between the Sensor-controlled safety sign and the disinfection device, the status of low power and access control board is indicated:

State LED Buzzer Enter Bluetooth pairing status Pairing complete Low battery Turn on door sensor detection Turn off door sensor detection Sensor-controlled safety sign is touched (under non security state)

blue quick flashing blue goes out and returns to working state Any color light, periodic slow flashing (3S)

Three buzzers Buzzer 1 sound The indicator unchanged light remains Make a long sound until the Sensor-controlled safety sign stops moving 4.5 Bluetooth pairing (Web) As the peripheral equipment of disinfection equipment, the Sensor-controlled safety

[system settings]

sign should be paired through Bluetooth. The [peripheral]

provides the pairing of Sensor-controlled safety sign. tab of One disinfection device allows multiple Bluetooth Sensor-controlled safety signs The communication distance of the Sensor-controlled safety sign is not less than 20 UBTECH ROBOTICS CORP LTD UBTECH Sensor-controlled safety sign USER MANUAL meters, which can block a conventional room door (such as hotel or hospital room door) Users can upgrade firmware via Bluetooth OTA Pairing steps of Sensor-controlled safety sign:

When it is not paired, it will prompt "there is no pairing Sensor-controlled safety Find the Bluetooth device and list the devices that can be found after searching sign"

for a period of time Note: the Bluetooth MAC address is pasted on the body of the caution for user identification. At the same time, the interface prompts the user that "the Sensor-controlled safety sign should open the pairing mode". Start pairing and select any Sensor-controlled safety sign. If it is successful, it will prompt "the selected Sensor-controlled safety sign are paired successfully!"

Otherwise, it will prompt "matching of the selected Sensor-controlled safety sign failed!"

If the pairing is successful, the information of the paired Sensor-controlled safety the paired disinfection devices the same time, sign will be displayed. At broadcast voice Continue to add Sensor-controlled safety sign, up to 4 at present. Or you can cancel the pairing with the Sensor-controlled safety sign Part 5 Transporting, Clean and Storage 5.1 Transportation If you need to transport ADIBOT, please put it in the box. 5.2 Maintenance Warning:

Do not use abrasives, aerosols, alcohol containing liquids or other liquids to clean the Sensor-controlled safety sign, because they may contain flammable substances or may damage the plastic shell, cloth and printed characters on the cloth. Do not spray or spray the Sensor-controlled safety sign with water or other liquids. Please keep the Sensor-controlled safety sign dry. Follow the steps below to ensure safety and avoid damaging the Sensor-controlled 1. Press the power button on the side of the main control box to close the caution 2. Open the back cover of the main control box and take out the battery to ensure that the access plate is completely powered off;

3. Clean the outside of the Sensor-controlled safety sign with a soft damp cloth;

4. Wipe the outside of the Sensor-controlled safety sign thoroughly with a soft dry safety sign:

sign;

cloth;

5. Check whether the Sensor-controlled safety sign is dry. Note: take out the battery when the Sensor-controlled safety sign is not used for a UBTECH ROBOTICS CORP LTD UBTECH Sensor-controlled safety sign USER MANUAL long time. It is found that there is no indication after the Sensor-controlled safety sign is opened. Please make sure that the battery has power. Part 6 Reference 6.1 Device Specification 524(L) * 322(W) * 752(H) mm 2.2kg 0~40

-40~60 10 to 85% relative humidity (indoor use only) Device Body Material Stainless steelPC+ABS 95% (non-condensation indoor only) Nordic nRF52833, 512KB Flash, 128K Ram Bluetooth 5.0 1x 2W Buzzer LED * 2 Mode Button * 1 Power Switch * 1 6V DC 20mA Dimensions Size Weight Operating temperature Operating humidity Storage temperature Storage humidity Device System Main Processor Wireless Module Acoustics LED Button Switch Power Supply Input Voltage Current Warning label cloth AA Battery *8 User Manual 6.2 Replacement Parts Description Part #

6.3 FAQ/Troubleshooting Question The Sensor-controlled safety sign cannot be UBTECH ROBOTICS CORP LTD Solution

-Check whether the switch key on the side of the control box is loose, abnormal or open;

UBTECH Sensor-controlled safety sign USER MANUAL activated

-Check whether the battery socket in the control box is loose, abnormal or insufficient;

-If the problem persists, please contact product technical support center. Sensor-controlled safety sign connection failed

-The distance between entrance guard and disinfection equipment is too far. You can try to shorten the distance or add multiple Sensor-controlled safety signs. Part 7 Declaration of Conformity 7.1 FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the follo wing two conditions: (1) this device may not cause harmful interference, and (2) this devi ce must accept any interference received, including interference that may cause undesire d operation. Changes or modifications not expressly approved by the party responsible for compli ance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B dig ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide re asonable protection against harmful interference in a residential installation. This equipm ent generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communicat ions. However, there is no guarantee that interference will not occur in a particular installa tion. If this equipment does cause harmful interference to radio or television reception, wh ich can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the rece iver is connected Consult the dealer or an experienced radio/TV technician for help 7.2 FCC Radiation Exposure statement This equipment complies with FCC radiation exposure limits set forth for an uncontro lled environment. This equipment should be installed and operated with minimum distanc e 20cm between the radiator and your body. This transmitter must not be co-

located or operating in conjunction with any other antenna or transmitter. UBTECH ROBOTICS CORP LTD

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name UBTECH ROBOTICS CORP LTD 16th and 22nd Floor, Block C1, Nanshan I Park, No.1001 Xueyuan Road, Nanshan District,Shenzhen City,China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Wayne Cheng 2AHJX 2AHJX-RAD001 wayne.cheng@ubtrobot.com 0755-83474428 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:2021-1-19 Applicant Signature:

Print Name: Wayne Cheng Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Manager Applicant Declaration Rev:0.0

UBTECH ROBOTICS CORP LTD TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:

Confidentiality Request regarding application for FCC ID: 2AHJX-RAD001 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Sincerely, Signature:

The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Print Name: Wayne Cheng Title: Manager On behalf of Company: UBTECH ROBOTICS CORP LTD Telephone: 0755-83474428 E-mail: wayne.cheng@ubtrobot.com

UBTECH ROBOTICS CORP LTD Date: 2021/1/19 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AHJX-RAD001 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with UBTECH ROBOTICS CORP LTD. This authorization is valid until further written notice from the applicant. Print Name: Wayne Cheng Signature:

Title: Manager On behalf of Company: UBTECH ROBOTICS CORP LTD Telephone: 0755-83474428 E-mail: wayne.cheng@ubtrobot.com