FCC ID: 2AHJX-YANSHEE-1 Yanshee Robot

User Manual Precautions!

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. All example of use refer to warning card. Keep this product away from fire and keep it dry and clean. Do not squeeze this product with too much force during use. Please use the robot on a flat surface. Maintain an appropriate distance from the robot while it is in operation to avoid injuries. When the robot is in operation, do not forcibly bend its joints as to avoid hand injuries and damage to the machine. Please use the supplied charger for charging the robot. The servos for robot joints are precisely designed and should not be disassembled without authorization. Contact us if necessary. For repair services, go to your local after-sales service center or contact our customer support. When an abnormality is found during debugging, immediately press the Emergency Stop button and cut off the power as to avoid hand injuries and damage to the machine. Take necessary preventive measures when using the robot. Do not use it at heights or near any edges as it may fall off and result in damage. Man-made damage is not covered by our warranty. It is best to use the robot for no longer than 1 hour each time, which will extend the service life of the servo actuators. This product is not intended for children under 14 years of age. You will be provided with software updates if any. For some features, the latest update instruction shall prevail. Please use HDMI cables with good shielding layers and magnetic rings when connecting Yanshee to an external monitor. Precautions for Batteries 1. The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc). Do not touch the product when it is moving to avoid hand injuries. 2. 3. 4. 5. 6. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Immediately Cut off the power and contact us when:

a. The robot smokes or you smell something burning; or b. Water or any other foreign matter enters the robot; or c. The robot is damaged. The User Manual contains important information. Please keep it for future reference!

Warning:

An "Emergency Stop" button is on the top of the robot. When the robot is in operation, you can press this button to immediately cut off the power and stop its operation. Emergency Stop button 01. Packing List User Manual User Data Set*1

(Quick Start Guide*1, Warranty Card*1) Yanshee Robot components: 1 Quick Start Guide: 1 Warranty card: 1 Usage Examples: 1 Battery: 1 Power adapter: 1 Power cord: 1 Spare parts kit: 1 (wires, screws) Screwdriver: 1 Sensor Suite: 1 (Selective Accessories) Yanshee Robot Charging dock: 1 (Selective Accessories) 02. Appearance Emergency Stop button MIC indicator MIC port USB port GPIO extended port Camera Camera indicator HDMI port On/Off button Sensor port Front view of Yanshee 02. Appearance Speaker Power Indicator Charge port Method 2: Search and download "Yanshee" in APP Store/Google Play/MyAPP or other platforms. Method 3: Log onto www.ubtrobot.com to search for your desired product and download the APP. Backside view of Yanshee Introduction to GPIO Extended Port GPIO Pinout Diagram Function Physical Pin No. Function Yanshee Robot Note:

Ports 3, 5, 12, 35, 38 and 40 are used, of which ports 3 and 5 are for I2C communication and ports 12, 35, 38 and 40 are for audio I2S signaling. 03. Specifications Appearance Product Name Yanshee Product Model ERHA101 Construction Humanoid Color Silver Dimensions 370*192*106 (mm) Weight 2.05 kg Material Aluminum alloy structure, PC+ABS housing Servo Actuators 17 degrees of freedom (DOF) Electrical Specifications Operating voltage DC 9.6V Power 4.5W~38.4W Operating temperature Power adapter 0 to 40 Input: 100V~240V, 50/60Hz 1.5A Output: 9.6V, 4A Master Chip and Memory Processor STM32F103VDT6 Broadcom BCM2837 1.2GHz 64-bit quad-core ARMv8 Cortex-A53 RAM 1GB Memory 16GB Operating system Raspbian Network Wi-Fi Supports Wi-Fi2.4G 802.11b/g/n fast connect Bluetooth Bluetooth 4.1 Battery capacity 3000mAh Vision System Camera 8 mega-pixel camera, fixed focus Light Eyes: 3-color LED lights *2 Chest: 3-color LED notification lights *3 Microphone: green indicator *1 Charge: dual-color indicator *1 Audio Microphone Single Speaker Stereo speakers *2 Sensors Built-in sensor 9-axle motion tracking sensor *1 Motherboard temperature sensor *1 Extended port POGO 4PIN *6 Debugging Port HDMI 1 GPIO USB Keys 40 (6 of them are used) 2 Others ON/OFF key on the chest;

Emergency Stop key on the top Control Mode Mobile software (APP); voice control;

PC controlRaspbian Applicable Standard For BTMaximum Output Power :5.636 dBm For 2.4G WIFIMaximum Output Power : 18.19dBm 04. Download and Sign in to Mobile Software (APP) Download the APP:

Method 1: Scan the QR code below to enter the APP download page where you can click to download the Yanshee APP;

APP Download QR Code Yanshee Method 2: Search and download "Yanshee" in APP Store/Google Play/MyAPP or other platforms. Method 3: Log onto http://yandev.ubtrobot.com/en to search for your desired product and download the app. Sign in:

After installing the APP, run the APP and sign in according to the instruction. If you are a registered user, log into the APP directly. 05. Assemble the Robot Open and log into the APP. Select the assembly tutorial to learn about how to assemble or disassemble the robot from the menu bar. Select the disassembly tutorial to learn about how to disassemble the robot. 06. Install and Charge the Battery Install the Battery The battery compartment is below the left arm of the robot. Rotate the battery cover clockwise 90 to unlock it. Install the battery into the battery cover and then reinstall the battery cover. Rotate the battery cover counter-clockwise 90 to lock it. Charge the Battery Method 1: After installing the battery, connect the power cord to the charge port on the back of the robot to charge the battery. Method 2: Place the battery onto the dock charger, and then connect the power cord to the charge port of the dock charger to charge the battery. 07. Start the Robot and Set up the Network Press and hold the button on the chest for 2-3 seconds and release until the indicator is lit up in blue. The robot is booted up after you hear a boot-up sound. Make sure that both the Bluetooth and Wi-Fi are enabled on the smart devices. Open and log into the Yanshee APP, and click the icon on the upper left of the home screen to connect the robot and set up the network. Refresh and search devices detected by the system, and select the device to be connected according to the last 4 digits of the MAC address value on the label attached onto the back of the robot. After the desired device is selected, the APP will select the SSID identical to the local Wi-Fi to be displayed on the page. Enter the correct Wi-Fi password and click the

"Join" button, the robot will set up and connect to the network and also give you a voice prompt, saying

"Connecting". Note:

You will hear a voice prompt saying "Connected" after successful connection. If the connection fails, you will hear a voice prompt saying,

"Connection Failed". In this case, please set up the network again. You do not have to set up the network again for later use, just directly select the desired device from the list. After setting up the network, you can use the APP to control the robot and learn more information. 08. Use of Mobile APP The mobile APP has a built-in graphic user interface and integrates features including motion tracking, FPV, Blockly visual programming, action readback programming, curriculums, BBS and real-time sensor data view. Fall-over Management This feature is off by default. You can enable the feature via the APP. The robot can pick itself up if it falls over when enabled. Language Switching Both Simplified Chinese and English are supported so far. Go to your APP to select the desired language for the robot. 09. Built-in Smart Applications Raspbian OS issued by Raspberry Pi is used as the robot software. This open source software comes with the following features:

Speech Recognition The robot is configured with speech recognition and semantic recognition for Chinese, allowing you to chat with it. When the robot started, press the button on the chest until the chest lamp turns green, then you can chat with the robot after a "tinkling" sound is heard. Visual Processing The robot is configured with face analysis, face tracking and other features. You can call these functions through the programming tools in the APP or Raspberry Pi system. UBTECH provides the Open SDK API, which enables you to configure your own visual identification functions with third-party visual identification platforms. Note: please abide by relevant laws when using the third-party voice platform. Auto Update:

After the robot is connected to the Internet, the built-in platform software will automatically detect whether you have the latest version and execute the update process. Do not cut off the power or disconnect from the Internet while updating. 10. Open Source Platform The Yanshee robot is built on the Raspberry Pi open source platform and open SDK files are provided, allowing a user to configure, learn or develop smart Applications as desired, and also allowing developers to create their own robot.

(1). Use an HDMI cable to connect the Yanshee robot to a monitor.

(2). Use the USB port on the Yanshee to connect a USB, keyboard and mouse.

(3). You can log onto the Linux system from Raspberry Pi by simply starting the robot.

(4). SDK API and Demo codes are available from http://yandev.ubtrobot.com/en

(5). For developers, please visit https://www.raspberrypi.org to learn more information about Raspberry Pi. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Ages: 14+

FCC ID: 2AHJX-YANSHEE-1 UBTECH ROBOTICS CORP LTD Add: 16th & 22nd Floor, Block C1, Nanshan i Park, No. 1001 Xueyuan Road, Nanshan District, Shenzhen City, China P.R. Tel: 800-276-6137 www.ubtrobot.com 9 LTD 95*130mm 105g 0.5mm 2019-09-25 Yanshee1.1 -

1210200056 B 0.5mm PE 1 2 3 4 5 1. 2. 3. 1. 2. 1. 2. 3. 4.EAN/UPC

/

1.BOM3D 2.ID3D;

1. 2. 2019-09-25 2019-09-25 6 7 8 9 ID 1. 2. 3.CMIIT ID 1.ID 2. 3.ID 1. 2. 3. 10 2019-09-25 2019-09-25

Report No. : EED32L00193801 Page 97 of 101 View of Product-7 View of Product-8 Report No. : EED32L00193801 Page 98 of 101 View of Product-9 View of Product-10 Report No. : EED32L00193801 Page 99 of 101 View of Product-11 View of Product-12 Report No. : EED32L00193801 Page 100 of 101 View of Product-13 View of Product-14 Report No. : EED32L00193801 Page 101 of 101 View of Product-15

*** End of Report ***

The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CTI, this report cant be reproduced except in full.

Report No. : EED32L00193801 Page 93 of 107 PHOTOGRAPHS OF EUT Constructional Details Test model No.: ERHA101 View of Product-0 Report No. : EED32L00193801 Page 94 of 107 View of Product-1 View of Product-2 Report No. : EED32L00193801 Page 95 of 107 View of Product-3 View of Product-4 Report No. : EED32L00193801 Page 96 of 107 View of Product-5 View of Product-6 Report No. : EED32L00193801 Page 97 of 107 View of Product-7 View of Product-8 Report No. : EED32L00193801 Page 98 of 107 View of Product-9 View of Product-10 Report No. : EED32L00193801 Page 99 of 107 View of Product-11 View of Product-12 Report No. : EED32L00193801 Page 100 of 107 View of Product-13 View of Product-14 Report No. : EED32L00193801 Page 101 of 107 View of Product-15 View of Product-16 Report No. : EED32L00193801 Page 102 of 107 View of Product-17 View of Product-18 Report No. : EED32L00193801 Page 103 of 107 View of Product-19 View of Product-20

MACYanshee, BOLD,3.8pt

,3.8pt UBTECH ROBOTICS CORP LTD Product Name: Yanshee Robot Model Name: ERHA101 Input: 9.6V 4A FCC ID: 2AHJX-YANSHEE-1 Made in China Ages: 14+

Yanshee1.1 _ 1220900013 A 0.5mm PE 1 2 3 4 5 1. 2. 3. 1. 2. 1. 2. 3. 4.EAN/UPC

/

1.BOM3D 2.ID3D;

1. 2. 2019-07-29 2019-07-29 6 7 8 9 ID 1. 2. 3.CMIIT ID 1.ID 2. 3.ID 1. 2. 3. 10 2019-07-29 2019-07-29 Th he lab bel p Th he positio on of the e label is s shown on ositi n below Ba ack o of the robot t

UBTECH ROBOTICS CORP LTD Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: October 8, 2019 SUBJECT: FCC Application for (FCC ID: 2AHJX-YANSHEE-1) To Whom It May Concern:

We, the undersigned, hereby authorize Jelly Hsieh at Centre Testing International Group Co., Ltd / Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen, Guangdong, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Jelly Hsieh at Centre Testing International Group Co., Ltd / Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen, Guangdong, China on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards,

(signature)

(printed name) Wayne Cheng D:\6_Yanshee1.1 \\CE \\FCC POA Letter.docx

UBTECH ROBOTICS CORP LTD Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AHJX-YANSHEE-1 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type

(Block Diagram, Schematics, Operational Description) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, File Name

(Block Diagram.pdf, Schematics.pdf, Operational Description.pdf)

(printed name) Wayne Cheng Rev 11/20/07