FCC ID: 2AQI5-UG650A AC650 High-Gain Dual Band Wireless USB Adapter

CE Mark Warning RF warning statement:

Limit for General Population/uncontrolled exposure should be applied for this device, it is 2.0 W/kg as averaged over any 10 g of tissue.The highest reported 10g-SAR for body is 0.389 W/kg. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 5mm is used between the users body, including the antenna. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. Product name: AC650 High-Gain Dual Band Wireless USB Adapter Product model: CM496 Manufacturer: Ugreen Group Limited Operation frequency(Max power) 2.4G WiFi2412MHz-2472MHz(20dBm) 5G WiFi5180MHz-5240MHz(17.5dBm)5745MHz-5825MHz(14dBm) This product can be used in EU countries and regions, including: Belgium (BE), Bulgaria

(BG), Czech Republic (CZ),Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy(IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE) and United Kingdom (UK). SIMPLIFIED EU DECLARATION OF CONFORMITY The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows:

Hereby, Ugreen Group Limited declares that radio equipment type CM496 is in compliance with Directive 2014/53/EU, and this product is allowed to be used in all EU member states. The full text of the EU declaration of conformity is available at following company website:http://www.Ugreen.com FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment.Such modifications or changes could void the user's authority to operate the equipment. RF warning statement:

This device comply with FCC SAR requirements. The highest reported 1g-SAR for body is 0.959 W/kg, the SAR limit is 1.6 W/kg averaged over 1g of tissue. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 5mm is used between the users body , including the antenna.Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. Important WEEE Information

AC650 UGREEN

, f((

lodel,CM496 cc 10,2AQI5-UG65OA Made'" Ch,na D 01 Model CM496 FCC ID 2AQI5-UG65OA Made in China CE:

PT 403C I SKU CM496 I 90339 AO 2022/01/13 AO:

A1:

A2:

A3 ...

Ugreen Group Limited FCC Software Configuration Control Declaration Date: February 22, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: AC650 High-Gain Dual Band Wireless USB Adapter Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Chi Yang Title: Manager Signature of applicant Date: 2022/2/22 FCC Software Configuration Control Declaration Rev1.1

Declaration Of Identity To Whom It May Concern:

With regards to the application for Model: CM496, According to the designer, Ugreen Group Limited we hereby declare the difference between Model: CM496 and Model:

90339, CM580, 90553 as:

Basic Model Number: CM496 Basic Brand Name: UGREEN Basic Product Name: AC650 High-Gain Dual Band Wireless USB Adapter 0 New/ Additional Model Number(s):

90339, CM580, 90553 Declare the Circuit, PCB Layout and Electrical Parts of the following product(s) are identical to the basic model: CM496 Except the following(s): Model Names and Size of the Shell The others are the s Yours Sincerel , Ugreen Group ited Charge Person ame:

January 19, 2022