FCC ID: 2AQI5-GS1200 PowerRoam Portable Power Station

V A01 A02 2022.11.23 2023.2.17 Contents 1. Product Overview 2. Specications 3. Recharging Your Power Station 4. Powering Your Devices 5. App User Guide 6. Features & Operating Modes 7. FAQs 8. Troubleshooting 9. What's In The Box 10. Safety Instructions 11. Warranty Information 01 02 02 05 07 07 09 10 11 12 13 Product Overview Product Details Flashlight LCD Display Car Charging Output Port Ventilation Outlet Flashlight Power Button IoT Button/ IoT Indicator USB-C Output Ports 2 Main Power Button/Power Indicator USB-A Output Ports 2 LCD Display DC Power Button/DC Output Indicator DC5521 Output Ports 2 AC Power Button/AC Output Indicator AC Output Outlets 6 Overcharge Protection Switch AC Input Outlet (Utility Power DC Input Port (Solar/Car Charging) Protective Earth Screw Ventilation Outlet Remaining Recharge Time Total Input Power Remaining Battery Level Remaining Discharge Time Total Output Power /

Error Code Specications General Info Dimensions Net Weight Lithium Battery Rated Energy Input AC Solar 34 22 27 (cm) / 13.4 8.7 10.6 (inch) 11.5 kg / 25.4 lbs 1024Wh 40Ah 25.6V 100-130V~ 60Hz 15A Max 12-48V 15A 400W Max DC/Car Charger 12V / 24V 8A Max Output AC (6) USB-A (2) USB-C (2) 120V~ 60Hz 10A 1200VA/1200W Max Single-Port: 5V 3A/9V 2A/12V 1.5A/5V 4.5A 22.5W Max (Dual-Port: 45W Max) Single-Port: 5V 3A/9V 3A/12V 3A/15V 3A/20V 3A/20V 5A 100W Max (Dual-Port: 200W Max) Total Output Power 1565W Max Working Environment Temperature Discharging Temperature

-10~40 (14~104) Charging Temperature 0~40 (32~104) Power Saving Mode Always-On Mode Power Reduction Mode 01 Overload Warning USB-C Output USB-A Output Car Charging Output AC Output Wi-Fi Connection Status Bluetooth Connection Status Ventilation Fan Status High-/Low-Temperature Warning Recharging Your Power Station Safety Precautions Before charging, please make sure the power station is properly grounded. Please use an original or safety-certied power cable that meets the charging specications of this power station. When charging, ensure that the power station is well-ventilated and free from combustibles. Important Note Please fully charge this power station before using it for the rst time. In order to ensure safety while charging, overcurrent protection will automatically trigger when the input current exceeds the overcurrent protection value. When this happens, the Overcharge Protection Switch will protrude. Once the overcurrent is abolished, press the switch to resume charging. If the power station shows a low battery, please recharge promptly. Refraining from prompt recharge may result in the battery becoming inoperable. AC Recharging Recharge with PowerZip Fast Charging 1200W Max Input Power Car Recharging Car Charging Cable Powering Your Devices Power On/Power O Car Charging Output / DC5521 Output 1 Press to turn on Car Refrigerator AC Power Cable To charge power station via vehicle cigarette lighter port:

1. Please start the vehicle before recharging the power station with car charging cable. This will prevent vehicle failure to start due to insucient battery. 2. Please ensure cigarette lighter port and the car charging cable are properly connected. 3S Press and hold for 3 seconds to turn o Tips:

While powered on, if the power station is not used within 1 minute, the display automatically turns o. Press any button to turn display on. In the standby state, press to turn on. Press again to turn o. 1 solar parallel adapter and solar charging cable or A 2 X 100W/200W Solar Panels not included B 1 X 100W/200W Solar Panel not included Note: Up to 4 pieces of 100W solar panels can be connected (Some cables are not included). Low Light High Light Flash SOS SOS O

(or press and hold for 3 seconds) Projector Speaker Tips:

In the standby state, press to turn on. Press again to turn o. 1 2 The default state is ON, double-press DC button to turn o. To switch AC output frequency, press and hold the AC Power Button for 10 seconds while the AC output is o. Please check the rated frequency of the device before use. Improper frequency settings will result in damage to the power station and connected device(s). 02 03 04 05 06 USB Output Laptop Mobile Phone Digital Camera USB Fast Charging Cable Car Charger (1) 12V 10A 120W Max DC5521 (2) Single-Port: 12V 5A 60W Max (Car Charger + DC5521 2 = 120W Max) Solar Recharging To charge power station via solar panels, use the following conguration:

Flashlight In the standby state, you can switch between the 5 states. AC Output 1024Wh | 1200W PowerRoam Portable Power Station User Manual | Model: GS1200 App User Guide To control the power station via mobile device, scan the QR code to download the UGREEN App:

Uninterruptible Power Supply (UPS) Operating Modes Do not use UPS features in situations or with devices that require extreme reliability and/or security. Examples include but are not limited to:

Use with life-saving medical equipment like medical ventilators;

Use in situations or environments that may cause severe bodily harm/injury (such as on airplanes, ships, railways, elevators, etc.). This power station is not intended for use in any high-risk activities, such as activities where equipment failure can directly result in death, personal injury, substantial property damage, or activities that aect the operation of medical or similar equipment. UGREEN expressly disclaims any express or implied warranties of suitability for high-risk activities. Any such use is a misuse of the power station. Mode Standard Mode Description In Standard Mode, the power station automatically shuts down if there is no device connected and no operation is performed within 5 hours after powering on Setting Default mode Power Saving Mode In Power Saving Mode, the power station automatically shuts down if there is no device connected and no operation is performed within 2 hours after powering on While power station is on, double-press Main Power Button to enable/disable this mode Always-On Mode In Always-On Mode, the power station remains on until the battery is depleted or the power station is manually turned o While power station is on, press and hold AC power button for 3 seconds to enable/disable this mode Tip:

Power Reduction Mode You can also search for "UGREEN" App via Apple Store or the Google Play Store. For safe use, Power Reduction Mode will automatically turn on in the following 4 states:

1. Low temperature 2. High temperature 3. Low battery charging 4. Trickle charging

(The Power Reduction Mode icon on the LCD display illuminates to indicate that the mode is on.) 0% Battery Emergency Mode This mode allows for ashlight and USB ports usage when battery level is at 0%. When powered on, press and hold the DC Power Button and Flashlight Power Button for 10 seconds at the same time to enable this mode. After use, press and hold the Main Power Button for 3 seconds to disable. Tips:

This mode is only available when the battery level is 0%. Please avoid using this mode frequently, as power station battery life could be negatively aected. After using this mode, promptly charge the power station, otherwise it may become unusable. Features & Operating Modes U-Turbo While the U-Turbo Mode is active, the AC output ports of the power station can support devices with power ratings of up to 2500W. Tips:

For a safer charge, the U-Turbo mode is temporarily disabled while the power station is simultaneously charging and charging other devices. U-Turbo is enabled by default. You can disable it using the "UGREEN" App. If the U-Turbo Mode is on, it is recommended to connect only one device to the AC output port to avoid abnormal use of the power station. The AC output port can support devices up to 2500W like: hair dryers, electric kettles, etc., but U-Turbo Mode is not applicable for all electrical appliances. Inductive and high-power devices such as air conditioners, coee machines, and clothes dryers are not recommended. Factory Reset To perform a factory reset, ensure the power station is not connected to any other device/appliances/etc. Press and hold the AC Power Button and the DC Power Button simultaneously for 10 seconds to restore the power station to factory settings. Note:

This operation will clear all network conguration data, function settings, etc. saved by the power station. Perform reset with caution. FAQs Q1: What devices can be connected to the AC Output Port of the power station?

A1: The rated power of the AC output port of this power station is 1200W, which can power most electronics, but it is recommended that you conrm the power of the device before use and ensure that the sum of the power of all load devices is less than the rated power. When turning on the U-Turbo function, AC output port of the power station can support heating devices with a rated power of up to 2500W. But the function is not suitable for all devices. Inductive and high-power devices such as air conditioners, coee machines, and clothes dryers are not recommended. Q2: Can I recharge the power station while charging connected devices?

A2: Yes. It is not recommended to power high-power devices when using this feature. Q3: How do I know how long the power station can power devices?

A3: After a device is connected, the estimated remaining discharge time for the power station will be shown on the display. This is calculated based on the actual power of the connected device and the remaining battery level of the power station. If the actual power of the connected device is high and the power station's remaining power is low, the remaining discharge time is short.t. Q4: Why does the fan turn on during use?

A4: The fan automatically turns on to cool the power station, which is normal and provides a safer charge. You can reduce the sound caused by the fans by turning on [Quiet Mode] in the "UGREEN" App [Settings]. What's In The Box Q5: Why does the power station run out of battery even when no device is connected?

A5: When the AC Output Outlets are on, even if no device is connected, there will be a certain amount of no-load power consumption. To avoid this, please ensure the AC Output Outlets are turned o when not in use to conserve battery. Troubleshooting Indicator Problem Solution OVERLOAD Output Overload Remove all connected external devices from the power station then restart the power station. Low Temperature Protection Move the power station to a working environment temperature as previously specied by this manual before continued use.

+F03 Charging High Temperature Protection Method 1: Open the App to enable Quiet mode. Method 2: Stop charging the power station, turn it o and wait 10 minutes before resuming charge.

+F17/F50 Temperature Detection Failure Please cease use immediately and contact UGREEN Customer Service.

+F10/F12/

F49 Discharging High Temperature Protection Remove all connected external devices from the power station, place the power station in a cool and well-ventilated environment, then wait 10 minutes. After 10 minutes, turn it on again. F05 F22 F33 F36 F37 F38 F39 Discharge Undervoltage Protection DC Output Failure USB-A1 Output Failure USB-A2 Output Failure Battery is low, please charge promptly Please cease use immediately and contact UGREEN Customer Service. AC Charging Input Overvoltage AC Charging Input Undervoltage DC Charging Input Overvoltage Please check whether input voltage is within the appropriate voltage range required by this manual. If the input voltage is normal, please contact UGREEN Customer Service. 1 1200W PowerRoam Power Station Safety Instructions Warnings Do not store or transport this power station with metal objects (glasses, watches, metal necklaces, hairpins, etc.). If you want to ship this power station via logistical means, please discharge the power station battery to 10%~30%. This power station contains a lithium battery; please do not disassemble, violently impact, or squeeze This power station cannot be carried on a plane. Please abide by the relevant regulations of civil the power station. Do not throw the power station into re, or use it in situations of high temperature and during short aviation transportation. circuit. Do not insert foreign objects or ngers into the power station or use sharp objects to puncture it, so as to avoid damaging the power station or unintentionally causing an explosion due to abnormal use or short circuit. Maintenance For long-term storage, please put the power station in the storage bag. Please charge and discharge at least once every 3 months (discharge to 30%, then charge it to 60%) to ensure battery health. For long-time storage, please check the power stations remaining battery level. If it shows a low battery, If the power station accidentally falls into water, it should be immediately moved into a safe, open area please charge rst, otherwise the battery may be damaged. until it is completely dry. Do not use it again. Dispose of it properly according to the Disposal Guide Please store the power station at the appropriate storage environment temperature (20~25/68F-77F) detailed in this manual. specied in this manual. Due to the particularity of the power station (built-in battery, high-voltage, etc.), please keep the power If the port of the power station is dirty, please clean with a dry cloth. Do not clean with chemicals or spray station out of reach of children and pets. Special groups are recommended to use it under the cleaners. protection and supervision of a designated guardian. Notes for Safe Use Do not place heavy objects on this power station. Disposal Please dispose of this power station in accordance with local laws and regulations regarding battery recycling and disposal. Do not dispose of it in ordinary trash. Be sure to fully discharge the battery of this power station before disposing of it in the designated battery Please use the power station in a dry and well-ventilated environment. While in use, ensure the recycling bin. ventilation outlets of the power station are not blocked. If the battery cannot be completely discharged due to product failure, please contact a professional Do not place the power station near sources of heat or re, such as microwave ovens, pressure cookers, battery recycling company for further processing. 1 AC Power Cable 1 DC5521 to DC5525 Cable 1 Car Charging Cable heating furnaces, etc. If the power station catches re, please use re extinguishing equipment as quickly as possible. Do not expose the power station to any liquids and do not use it in rainy or humid environments. If the power station is subjected to strong impact or fall, do not continue normal use. Please dispose of it properly according to the Disposal Guide in this manual. Do not use this power station in environments of strong electrostatic or electromagnetism. When not in use, please remove the power cord of the power station and all connected external USER MANUAL QSPEVDU!XBSSBOUZ!DBSE devices. When unplugging the power cable, please pull it out from the plug directly, rather than pulling 1 Solar Parallel Adapter 1 Accessory Storage Bag 1 User Manual 1 Warranty Card on the cord. Do not use non-UGREEN cords or parts. If repair or replacement parts and/or accessories are required, please contact UGREEN customer service. Do not use a damaged power cable to charge the power station. Please use the power station at the specied working environment temperature. Transportation & Storage Disclaimer Before use, please read this manual carefully, and use the power station correctly in accordance with all safety instructions in this manual. Relevant safety precautions especially must be followed. After reading, please keep the manual for future reference. To the extent permitted by law, improper use of this power station may directly or indirectly result in damages to the power station and/or personal property and cause personal injury. UGREEN will not assume any legal responsibility. Under the condition of compliance with laws and regulations, UGREEN has the nal right to interpret this manual and other related documents of this power station. The User Manual is subject to update, revision, or termination without notice, but updates can be received via the

"UGREEN" App, or https://www.ugreen.com/. Warranty Information A limited 5-year warranty applies to all UGREEN portable power stations purchased from UGREEN and authorized sellers. Please feel free to contact us if you run into any problems.For more details on the Note: In the case of an unsettled issue, please contact UGREEN Customer Service. Please store this power station in a dry place, at room temperature. warranty, please visit: www.ugreen.com A ll da t a s h o w n a r e b a s e d o n U G R E E N l a b o r a t o r y t e s t i n g . A c t ua l r e s u l t s m a y v a r y a c c o r d i n g t o s p e c i c c i r c u m s t a n c e s . 07 08 09 10 11 12 13 1. 157g 3. PANTONE 3415C 3. 160x960mm 4. 160x120mm 5. 1 mm 6. <=0.5 mm 7. <=0.35 mm 8. 9. 10.MOSH(C16-C35)0.1%MOAH1-70.1%MOAH3-70.0001%

SELECT TOL. Dim 0~6 6~30 30~120 120~300 300~450 450~600 B 0.05 0.15 0.20 0.30 0.40 0.50 DRAFT TOLERANCE A 0.05 0.10 0.15 0.20 0.25 0.30 V C 0.10 0.20 0.30 0.40 0.50 0.60

+_ EPS EPE 0.50 0.50 1.00 2.00 3.00 0.50 0.50 1.00 2.00 3.00 EPP BAG CTN LABEL 0.20 0.20 0.25 0.30 0.50 0.80 3.00 5.00 10.00 15.00 20.00 0.50 0.50 1.00 2.00 3.00 1.00 1.00 2.00 3.00 CRITICAL DIM. MARK

SCALE 1:1 SHEET 1/1 UNIT mm

: GS1200 15053 GS1200 1200W _ lCStatement EN This device standard(s).

(I) thJsdcemay

(2)t his dwlce must accept compwithIndustry Canada liexemptRSS Operation is subject to the following conditions:

notcauseJnrferonce;

including any inrforenco, that maycauundesiredoperation of tho d inteiference aux CNR d'lndustrie Cana radioemptsdeIKencaL'ploJtation est conform aux apparells FR Le prostappareil appllcables est autorisauxdeuxconditiosuJvans:

(I)i'apparoll

(2)l'util sub I, memesl le brouillage radioolectrique lefonct compromettre ne dolt pas produlredebroulllage tout brouJllage isateur de l'apparell dolt accepter ionnement

susceptible d'en

/ NMB-003(A) CANIC003(A) ThisuipmentcompwithIC radiationosure forth for an uncontrolvironmont.Thisuipmonts hould and oporatedthminimum distanco lnstallod of20cmton tho radiator er must not and your body. This transmitt co-locaoroporatingin conjunction transmittor. limits set with any other antenna or o auxllmisdxpos itionaux do la IC etabllos pour Cetulpomonttconform rayonnornonts contrCetulpomontdoit mo ins 20cm de distanced'un radiatour rnettournodoitpotr o co-localisni conjonction avoc uno autroantonno otrinstalle ou do vooorpCet r o n fonctionno o u un aut1..mottour. otfonctionnor au unonvironnomontnon User Instruction GS1200 03. BB.OOOOO. UG.0203.15 Thisuipment distance of 20 cm betwnthe radiator and your body. s houldinstadandoratedwith minimum w hen the equfpment fora Clas.sAdlgitalvice, hanmful lnterfeco environment pursuant dgntoprovide hasn standfound to comply with the topartlSofthe FCC reasonable isoperatIna This equipment limits Ru!Theselimitsare against commercial genras, radiate radio f requoncy onerand,lfnotlnstahndusfn with tho instrucon accordancr, intorforonco to radio communicatio uipmontin a residonla,.eais likely intoronco Inrferonce in w hich caso tho user will required at his own expense. manua may cauharmful ns. Operaonof this to cauharmful to cortthe Thisuipment uses, and can protection FCCStatement

oftheFCCRus. Operation is complies with part 15 conditions:

and(2this device This device SU bJ ect to the folingtwo cause harmful interference, rferencerecved, undesiroperation. Warning:

party responsible operatheuiprnent. C hanges or modifications for compliance including

(!) Thisdevicemnot any must accept interference that mcause not exprlyapproved to could void t he usefs authority by the I FCCRadiation Exposure Statement |

for an uncontrol ThisuipmtcompliwithFCC radiation forth co-locador oporating transmittor onvlronmontThls in conjunction oxposuro limits sot transmlnor must not antonna or with anyothor

Ugreen Group Limited Declaration concerning Antenna Specification It is hereby declared that the product Model No.: GS1200, 15053, 15053A, 15053B, 15053X, 15053U, 15053J, 15053E, 15053US, 15053JP, 15053EU, 15053UK, 15053ZD FCC ID : 2AQI5-GS1200 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for internal antenna type(s) described below:

Model No. of antenna: ESP-ANT D-H PCB antenna Type of antenna:

3.96 dBi Gain of the antenna:

2.4G: 2402~2482MHZ Frequency range:

The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name:

Address:

City:

ZIP / Postal code:

Country:

Place:

Ugreen Group Limited Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, ShenZhen, China Shenzhen

China Shenzhen Date: 4/16/2023 Signature:

version01

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6087649.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case OTA TEST REPORT Applicant Espressif System (Shanghai) Co.,Ltd Product ESP32-C3-MINI-1 Model ESP-ANT D-H Report No. Y2102A0260-T2 Issue Date March 9, 2021 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in ANSI/IEEE Std 149-2008. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Preparedby:PengTao Approvedby:KaiXu TA Technology (Shanghai) Co., Ltd. No.145,JintangRd,TangzhenIndustryPark,PudongShanghai,China TEL:+8602150791141/2/3 FAX:+8602150791141/2/38000 OTA Test Report Report No: Y2102A0260-T2 TABLE OF CONTENTS 1. Test Laboratory .............................................................................................................................. 3 1.1. 1.2. 1.3. 1.4. Notes of the Test Report ................................................................................................... 3 Test facility ........................................................................................................................ 3 Testing Location ................................................................................................................ 3 Laboratory Environment .................................................................................................... 4 2. General Description of Equipment under Test ............................................................................... 5 2.1. Applicant and Manufacturer Information ............................................................................ 5 2.2. General information ........................................................................................................... 5 2.3. 2.4. 2.5. Test Date ........................................................................................................................... 5 Receiving Date .................................................................................................................. 5 Applied Standards ............................................................................................................. 6 3. Test Conditions .............................................................................................................................. 7 3.1. 3.2. Test Configuration ............................................................................................................. 7 Test Measurement ............................................................................................................. 7 4. Test Results ................................................................................................................................... 8 4.1. Gain and Efficiency ............................................................................................................ 8 5. Equipment List ............................................................................................................................... 9 ANNEX A 3-D Pattern Plots ................................................................................................................... 10 ANNEX BThe EUT Appearance and Test Configuration ...................................................................... 12 B.1 EUT Appearance ................................................................................................................... 12 B.2 Test Configuration ................................................................................................................. 13 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 2 of 13 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. OTA Test Report Report No: Y2102A0260-T2 1. Test Laboratory 1.1. Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology

(shanghai) co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2. Test facility A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform measurement. 1.3. Testing Location Company:

TA Technology (Shanghai) Co., Ltd. Address:

No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City:

Shanghai Post code:

201201 Country:

P. R. China Contact:

Xu Kai Telephone:

+86-021-50791141/2/3 Fax:

Website:

E-mail:

+86-021-50791141/2/3-8000 http://www.ta-shanghai.com xukai@ta-shanghai.com TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 3 of 13 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. OTA Test Report Report No: Y2102A0260-T2 1.4. Laboratory Environment Temperature Relative humidity Shield effect Ground resistance Min. =19Max. = 25 Min. =40%Max. =72%

0.7-6GHz

> 100dB

<0.5 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 4 of 13 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. OTA Test Report Report No: Y2102A0260-T2 2. General Description of Equipment under Test 2.1. Applicant and Manufacturer Information Applicant Name Espressif System (Shanghai) Co.,Ltd Applicant address Suite 204 Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, China Manufacturer Name Espressif System (Shanghai) Co.,Ltd Manufacturer address Suite 204 Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, China 2.2. General information Product Name:

ESP32-C3-MINI-1 EUT Description Model HW Version:

SW Version:

ESP-ANT D-H ESP32-C3-MINI-1 V1.1 esp32c3_phy_20210225_no_sleep_and_ampdu Antenna Type:

PCB Antenna Antenna Manufacturer:

Espressif System (Shanghai) Co.,Ltd 2402MHz ~ 2502MHz Test Frequency:

Note: The EUT is sent from the applicant to TA and the information of the EUT is declared by the applicant. All indications of Pass/Fail in this report are opinions expressed by TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. Test lab. of the antenna gain and radiation pattern measurement: TA Technology (Shanghai) Co., Ltd. 2.3. Test Date The test is performed from February 25, 2021 to March 4, 2021. 2.4. Receiving Date The sample was received on February 25, 2021. TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 5 of 13 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. OTA Test Report Report No: Y2102A0260-T2 2.5. Applied Standards According to the specifications of the manufacturer, it must comply with the requirements of the following standards:

Test Method: ANSI/IEEE Std 149-2008 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 6 of 13 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. OTA Test Report Report No: Y2102A0260-T2 3. Test Conditions 3.1. Test Configuration Great-Circle-Cut method is used to measure the antenna 3D GAIN of EUT in OTA qualified anechoic chamber. Equipment Under Test (EUT) geometry centre vertical projection at the centre of platform, the distance from EUT to measurement antenna is 5m. 3.2. Test Measurement Spherical coordinate system Note: Theta is from 0~180 degree. Phi is from 0~360. Rotate the EUT and record the Data, the Figure 1 Test coordinate system step of rotation is 15 degree. Test Setup TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 7 of 13 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. OTA Test Report Report No: Y2102A0260-T2 4. Test Results 4.1. Gain and Efficiency Model Test State Frequency

(MHz) Efficiency

(dB) Efficiency

(%) Gain

(dBi) Directivity

(dBi) Note ESP-ANT D-

H Free Space 2402 2407 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2477 2482 2487 2492 2497 2502

-2.18

-1.99

-1.91

-1.82

-1.82

-1.99

-2.07

-1.96

-2.06

-2.08

-2.07

-2.05

-2.02

-2.27

-2.41

-2.21

-2.26

-2.28

-2.12

-2.03

-2.08 60.51 63.17 64.40 65.70 65.70 63.21 62.07 63.67 62.23 61.90 62.11 62.41 62.88 59.35 57.41 60.18 59.45 59.22 61.39 62.71 61.91 2.91 3.28 2.84 3.17 2.88 2.92 3.11 3.11 3.33 3.40 3.59 3.62 3.75 3.65 3.70 3.70 3.96 4.05 3.92 4.16 4.03 5.09 5.28 4.75 5.00 4.70 4.92 5.18 5.07 5.39 5.48 5.66 5.67 5.77 5.92 6.11 5.91 6.21 6.33 6.03 6.19 6.12 15 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 8 of 13 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. OTA Test Report Report No: Y2102A0260-T2 5. Equipment List Type of Equipment Manufacture Model Number S/N Calibration Date Expiration Time Network Analyzer Key sight E5071B MY42404014 2020-05-17 2021-05-16 Switch Control System Dual polarized horn antenna ETS ETS Software ETS-lindgren 7006/7001 00059957/MY 42001152 N/A N/A 3164-04 00062743 2020-04-14 2021-04-13 EMQ-100 Pattern Measurement software 1.09 N/A N/A TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 9 of 13 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. OTA Test Report Report No: Y2102A0260-T2 ANNEX A 3-D Pattern Plots Azimuth = 0.0 Elevation = 0.0 Roll = 0.0 Azimuth = 88.6 Elevation = -1.7 Roll = -95.3 Azimuth = -9.7 Elevation = -84.5 Roll = 79.4 Total Total Total Y Z Z X X Y X Y Z

) B d

e s n o p s e R

) B d

e s n o p s e R

) B d

e s n o p s e R 4 0

-4

-8

-12 4 0

-4

-8

-12 4 0

-4

-8

-12

) m B d

r e w o P 60 90 120

) m B d

r e w o P 60 90 120 30 0 330 Cut1 300 270 240 150 180 Angle (?

210 30 0 330 Cut2 300 270 240 150 210 180 Angle (?

Max: 3 Min: -8 Scale: 1/div Max: 6 Min: -10 Scale: 2/div 2502 MHz 2402 MHz 2407 MHz 2412 MHz 2417 MHz 2422 MHz 2427 MHz 2432 MHz 2437 MHz 2442 MHz 2447 MHz 2452 MHz 2457 MHz 2462 MHz 2467 MHz 2472 MHz 2477 MHz 2482 MHz 2487 MHz 2492 MHz 2497 MHz 2502 MHz 2402 MHz 2407 MHz 2412 MHz 2417 MHz 2422 MHz 2427 MHz 2432 MHz 2437 MHz 2442 MHz 2447 MHz 2452 MHz 2457 MHz 2462 MHz 2467 MHz 2472 MHz 2477 MHz 2482 MHz 2487 MHz 2492 MHz 2497 MHz TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 10 of 13 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. OTA Test Report Report No: Y2102A0260-T2

) m B d

r e w o P 60 90 120 Cut3 300 270 240 30 0 330 150 180 Angle (?

210 Max: 2 Min: -10 Scale: 2/div 2502 MHz 2402 MHz 2407 MHz 2412 MHz 2417 MHz 2422 MHz 2427 MHz 2432 MHz 2437 MHz 2442 MHz 2447 MHz 2452 MHz 2457 MHz 2462 MHz 2467 MHz 2472 MHz 2477 MHz 2482 MHz 2487 MHz 2492 MHz 2497 MHz 2402MHz ~2502 MHz Wi-Fi 2.4G 3D Gain TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 11 of 13 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. OTA Test Report Report No: Y2102A0260-T2 ANNEX BThe EUT Appearance and Test Configuration B.1 EUT Appearance Picture 1 Constituents of EUT TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 12 of 13 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. OTA Test Report Report No: Y2102A0260-T2 B.2 Test Configuration Picture 2 Test Setup

******END OF REPORT ******

TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 13 of 13 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd.

America Ugreen Limited Section 2. 911 (d)(7) USA Agent for Service of Process Longcheng Company name: Ugreen Group Limited Ugreen Building, Address:

Shenzhen, China Name:

Product PowerRoam 2AQl5-GS1200 FCC ID:

Model(s):

Portable Power Station Industrial Park, Longguanxi Road, Longhua, 2.911(d)(7) USA Designated Agent for Service of Process We, [Ugreen NOTE1 fothepurpose

("the applicant") of process service of accepting Group Limited]

designate

[ America Ugreen Limited]

of the applicant. on behalf related consent:

for matters our consent to accept service to the applicable We Acknowledge Applicant and at the physical United States and acknowledge address and email address of the designated agent acceptance of process to maintain of our obligation States for no less than one yeaaftereither all marketing conclusion the equipment, has permanently the U.S., or the of the applicable equipment of process in the U.S. our an agent for service the grantee within or judicial of any Commission-related administrative and importation equipment, proceeding is late whichever in the United involving terminated We Acknowledge related for matters Agent obligation:

United States address permanently within proceeding involving and email address terminated the U.S., otheconclusion all marketing our obligation to the applicable to accept service equipment in the of process at our physical U.S. for no less than one year after either and importation the grantee has equipment of the applicable or judicial of any Commission-related administrative the equipment, whichever is later. USA Agent Company name: America Ugreen Limited Address: 1644 Platte Street Suite 400 Denver,CO ,80202,USA Applicant Company name: Ugreen Group Limited Address:

Industrial Longhua, Ugreen Building, Longcheng Pak,Longguanxi China Shenzhen, Road, Name: Stewart Walker FRN of U.S. agent:0033426180 Contact Telephone Email: seven@ugreen.com Signatu No: 415-310-6252 e e

Title:

Officer Autorized Date: 2023-04-10 Name: Chi Yang FCC ID Number: 2AQl5-GS1200 Contact Telephone Email:

No: 0755-28198930 certification@ugreen.com Signature:G Title:

Manager Date: 2023-04-1 O 2.911 (d)(7)USA Agent vl.2 The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC.

- Ugreen Group Limited -

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 4/16/23 To whom it may concern:

We, [Ugreen Group Limited], hereby certify that the equipment for which authorization is sought

(FCC ID: [2AQl5-GS1200]) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, 2 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9 2 _ u q E d e r e v o C

l e d o m

_ 2 6 Signature

[Name]Chi Yang

[Title]Manager

[Company]Ugreen Group Limited The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01.