FCC ID: 2A74P-UF1062A LED Floor Lamp

Instrucon Manual UF7016 Wooden Floor Lamp Please read the operang instrucons before using this device for the rst me and store the operang instrucons for reference. 1 STRUCTURE Linen shade LED bulb Touch-sensive switch Lamp tripod Power adaptor 2 PACKING LIST 3 INSTALLATION INSTRUCTION 1 2 3 4 5 6 7 8 9 LED Touch Control Smart Ring Light ON/OFF

-Tap the ring Adjust Color Temperature

-Double tap the ring Adjust Brightness

-Long press the ring Touch the metal ring 10 Long Distance Remote Control Power ON

-Turn light on

-Long press 3s to pair Adjust color temperature Full brightness Timer preset

-Light will auto turn o in 60 min Remote indicator Power OFF

-Turn light o

-Long press 3s to pair Brightness+

Adjust color temperature Brightness-

Nightlight mode Leisure me mode Working mode Entertainment mode 5 IMPORTANT SAFETY INSTRUCTIONS This unit is suitable for installaon in a dry, indoor locaon only. Recommended for domesc use ONLY. Protect the device from humidity,moisture,and high temperatures (including direct sunlight). Before starng the installaon, shut o the power supply at the electrical panel by switching o the circuit breaker or removing the appropriate fuse. Cung the power at the light switch is not sucient to prevent electrical shock. DO NOT touch the light bulb with your bare hand, as the oils from your skin can shorten bulb life. Please handle with a clean cloth. DO NOT aempt to modify or repair the lamp yourself. V220720 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference.

(2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an autlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

ELYONA tepFloortamp Model: UF7016 FCC ID: 2A74P-UF1062A, Input: 100-240V ~ 50/60Hz Power: 10W Made in China

Ie Antenna Spec. I.1 Spec Item Spec Frequency range 2.4 ~ 2.5GHz VSWR 52 Null point check Any 30 angle range cant have null depth Average Gain (dBi) Peak Gain (dBi) 2.4GHz |2 4SGHz| 2.5GHz | 2.4GHz |2.45GHz| 2.5GHz 2-4 2-4 2-4 <3 <3 Antenna Photo & Length (mm) III. Antenna test report IIT VSWR VSWR Pass/NG 2.4GHz | 2.45GHz | 2.5GHz 1.12 1.12 1,33 Pass W181i LIN swR 1 u/ ea) Aa 1 us, 2 4 Test setup: Antenna on elevation angle @ = 0 azimuth plane Average Gain (Bi) Peak Gain (dBi) Pass 2.4GHz | 245GHz | 2.5GHz | 24GHz | 245GHz | 2.5GHz | NG 2.20 | 244 | -267 4.22 4.20 | -0.02 | Pass Pattern 240 GHz 245 GHz 250GHz Conclusion:

Based on the test result above, the antenna performance is OK,

Number Specification 5.00 2.4G TX remote control Dosage part location 5.01 Chip capacitors 0603 3.9PF/NPO 50V 10% Rohs 1 C01 5.02 Chip capacitors 0603 22PF/NPO 50V 10% Rohs 2 C13 C14 5.03 Chip capacitors 0603 0.1UF/ 25V X5R 10% Rohs 1 C8 5.04 Chip capacitors 0603 10UF/ 25V X5R 10% Rohs 1 C7 5.05 Chip resistors 0603 1K 5% Rohs 1 R1 5.06 High Frequency Laminated Inductors 0603 INDUCTOR ROHS SMD 4.3NH 0.3NHF<5GHz L1 1 5.07 SMD crystal oscillator 3225 16MHZ/12PF/10PPM Rohs 1 Y1 5.08 2.4G IC SOP14 9270X-TX Rohs 1 U1 5.09 SMD LED 0603 Red Highlight Light Emitting Diode Rohs 1 LED 5.10 Shrapnel positive 5.11 Shrapnel Negative 5.12 Button Battery CR2032 3.0V 1 1 1 1 5.13 PCB FR4Double-sided gold-plated plate, green oil and white characters, plate thickness 1.00MM 32*80MM ROHS 5.14 Dome-set 12-key with adhesive 5.15 12-key silicone key 5.16 Polished screw PB2.6X10 1 1 1 5.17 EVA F10Thick 1.5MM black single-sided adhesive1 5.18 cover 5.19 back cover 5.20 battery cover 1 1 1

ULite Smart Lighting Limited (DongGuan) 2022-08-25 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize DongGuan Anci Electronic Technology Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Sincerely, yaoping feng Manager ULite Smart Lighting Limited (DongGuan) 401, Building 13, No. 6-1, DuiTangHuaLing 1st Road, ChaShan Town, Dongguan City, Guangdong Province, China

ULite Smart Lighting Limited (DongGuan) 2022-08-25 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (EUT Name: LED Floor Lamp /Model:

UF1062A-XX, UF1101C-XX, UF1176A-XX, UF1109A-XX, UF1102C-XX, UF7062A-

XX, UF7052A-XX, UF1115A-XX, UF3050C-XX, UF7068A-XX, UF7050A-XX, UF7031A-XX, UF7043A-XX, UF7074A-XX, UF7016-XX /FCC ID: 2A74P-UF1062A) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Block Diagram ,Operational Description,Schematics) required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Sincerely, yaoping feng Manager ULite Smart Lighting Limited (DongGuan) 401, Building 13, No. 6-1, DuiTangHuaLing 1st Road, ChaShan Town, Dongguan City, Guangdong Province, China

ULite Smart Lighting Limited (DongGuan) Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RF module and antenna, PCB layout , schematics and component. the difference is the model Numbers and color of appearance. Production name FCC ID Model no. LED Floor Lamp 2A74P-UF1062A UF1062A-XX, UF1101C-XX, UF1176A-XX, UF1109A-XX, UF1102C-XX, UF7062A-XX, UF7052A-XX, UF1115A-XX, UF3050C-XX, UF7068A-XX, UF7050A-XX, UF7031A-XX, UF7043A-XX, UF7074A-XX, UF7016-XX Sincerely, yaoping feng Manager ULite Smart Lighting Limited (DongGuan) 401, Building 13, No. 6-1, DuiTangHuaLing 1st Road, ChaShan Town, Dongguan City, Guangdong Province, China