EXHIBIT 1 - PRODUCT LABELING Proposed IC Label Format Model: C4011300 Specifications: Text is black in color and justified. The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. These requirements may be met either by a separate label or nameplate permanently attached to the device or by permanently imprinting or impressing the label directly onto the device. The label text shall be legible without the aid of magnification, but is not required to be larger than 8- point font size. If the device is too small to meet this condition, the label information may be included in the user manual upon agreement with Industry Canada. The label for medical implants designed to be used within the human body shall be placed on the package and in the user manual. Proposed Label Location on EUT IC Label Location REPORT NO.: WTX20X05025323W-1 Page 1 of 14 RSS-247 Model: C4011300 EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 REPORT NO.: WTX20X05025323W-1 Page 2 of 14 RSS-247 Model: C4011300 EUT View 3 EUT View 4 REPORT NO.: WTX20X05025323W-1 Page 3 of 14 RSS-247 Model: C4011300 EUT View 5 EUT View 6 REPORT NO.: WTX20X05025323W-1 Page 4 of 14 RSS-247 Model: C4011300 EUT View 7 EUT View 8 REPORT NO.: WTX20X05025323W-1 Page 5 of 14 RSS-247 Model: C4011300 EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 Zigbee Antenna EUT Housing and Board View 2 REPORT NO.: WTX20X05025323W-1 Page 6 of 14 RSS-247 Model: C4011300 EUT Housing and Board View 3 Solder Board-Component View 1 REPORT NO.: WTX20X05025323W-1 Page 7 of 14 RSS-247 Model: C4011300 Solder Board-Component View 2 Solder Board-Component View 3 REPORT NO.: WTX20X05025323W-1 Page 8 of 14 RSS-247 Model: C4011300 Solder Board-Component View 4 Solder Board-Component View 5 REPORT NO.: WTX20X05025323W-1 Page 9 of 14 RSS-247 Model: C4011300 Solder Board-Component View 6 REPORT NO.: WTX20X05025323W-1 Page 10 of 14 RSS-247 Model: C4011300 EXHIBIT 4 - TEST SETUP PHOTOGRAPHS Conducted Emission Test Setup Radiation Emission Test Setup (Below 30MHz) REPORT NO.: WTX20X05025323W-1 Page 11 of 14 RSS-247 Model: C4011300 Radiation Emission Test Setup (30MHz to 1GHz) Radiation Emission Test Setup (1GHz to 18GHz) REPORT NO.: WTX20X05025323W-1 Page 12 of 14 RSS-247 Model: C4011300 Radiation Emission Test Setup (Above 18GHz) REPORT NO.: WTX20X05025323W-1 Page 13 of 14 RSS-247 Model: C4011300 EXHIBIT 5 - USERS MANUAL Information to Users According to the RSS-Gen section 8.4 and RSP-100 section 4, for this EUT, the instructions or operation manual furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
IC WARNING This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. REPORT NO.: WTX20X05025323W-1 Page 14 of 14 RSS-247