FCC ID: 2AK2F-OLASTAG2 OLASTAG.2

OLASTAG.2 Instruction manual This product is a BLUETOOTH Beacon. This product use 3.0V coin cell battery for power supply. The products work in the 2.4GHz worldwide lsM band, and theTransmit/Receive operating frequency is from 2400MHz~2480MHz. This BLUETOOTH beacon support Bluetooth version V4.0. Bluetooth V4.0 BLE:

Instructions for use Long press the button for 3 second iBeacon will power on,then iBeacon begin broadcasting the name and RSSI by Bluetooth We will receive the broadcasting name and signal by phone Bluetooth This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC-ID:2AK2F-OLASTAG2 IC:31785-OLASTAG2 Ultimate Sports Engineering Ltd UNIT 4, BURY MILL FARM, BURY, PULBOROUGH, WEST SUSSEX, RH20 1NN

\TEK ShenZhen BANTEK Testing Co.,Ltd. Add : A5&A6, Building B1&B2, No.45 Gangtou Road, Bogang Community, Shajing Street Bao'an District, Shenzhen, Guangdong, China 518104 Tel : +(86)755-2334 4200 E-mail : Service@btek-lab.com Web : www.btek-lab.com i 0423456789 W4

C5266091_X24_Ed.2 Ultimate Sports Engineering Ltd Attestation Statements TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization 2AK2F-OLASTAG2 Applicant Company name: Ultimate Sports Engineering Ltd Grantee code: 2AK2F FCC ID:

Contact Name: Tom Harrop Address:

PULBOROUGH, United Kingdom

+44 (0) 1798 839300 Telephone No:

Fax No:

+44 (0) 1798 839300 Email: tom@expmarine.co.uk FRN:

0026192724 UNIT 4, BURY MILL FARM, BURY, PULBOROUGH, WEST SUSSEX, RH20 1NN, i. ii.

[Ultimate Sports Engineering Ltd] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Ultimate Sports Engineering Ltd] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification.

[Ultimate Sports Engineering Ltd] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing coveredequipment . Date: 2023/12/20 Applicants Name: Tom Harrop Title: Manager Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

Ultimate Sports Engineering Ltd C5266091_X10_Ed.2 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-12-20 Subject: Request for Confidentiality FCC ID: 2AK2F-OLASTAG2 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: Tom Harrop Title: Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization Ultimate Sports Engineering Ltd Company: Ultimate Sports Engineering Ltd Address: UNIT 4, BURY MILL FARM, BURY, PULBOROUGH, WEST SUSSEX, RH20 1NN, PULBOROUGH, United Kingdom Product Name: OLASTAG.2 Model Number: OLASTAG.2 FCC Identifier: 2AK2F-OLASTAG2 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Tom Harrop Date: 2023-12-20 Title: Manager Signature of applicant:

1/1

2.91 1(d)(7)-U, VOS _ Agent_

{model} US 48_|

Ultimate Sports Engineering Ltd UNIT 4, BURY MILL FARM, BURY, PULBOROUGH, WEST SUSSEX, RH20 INN Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023/12/26 U.S. Agent Designation Ultimate Sports Engineering Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought

(FCC ID: 2AK2F-OLASTAG2):

Name and company of U.S. agent: ACR Electronics, Inc. Physical U.S. address of agent: 5757 Ravenswood Road,Fort Lauderdale,FL 33312,United States Of America. FRN of U.S. agent: 0008044232 Email address of U.S. agent: dan.stankovic@acrartex.com ACR Electronics, Inc. acknowledges their obligation to accept service of process on behalf of Ultimate Sports Engineering Ltd Ultimate Sports Engineering Ltd with the FRN [0025192724] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-

related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D071. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, An Signature Signature Tom Harrop Dan Stankovic Manager PM Ultimate Sports Engineering Ltd ACR Electronics, Inc.