FCC ID: 2A9OO-U1441P Thor T60 Triple Laser TV

USER MANUAL THOR T60 TRIPLE LASER TV IN THE BEST WAY POSSIBLE Please read carefully before using Contents 01 Projector User Manual 24 Bedienungsanleitung fr den Beamer 47 70 Manuel d'utilisateur du projecteur 93 Manuale d' uso del proiettore 116 Manual de usuario del proyector English Deutsch

Franais Italiano Espaol Table of Contents 1. Packaging Overview 2. Product Introduction 2.1 Product Specification 2.2 Appearance 3. Installation and Commissioning 3.1 Installation 3.2 Picture Adjustment 4. Operating Instructions 4.1 Boot guidance 4.2 System Home Page 4.3 Help 4.4 TV Manager 4.5 Media Player 4.6 Settings 5. Safety Precautions 6. Recycling 7. Trademark 8. Statement EN 01 02 07 13 19 22 23 23 EN 1. Packaging Overview The packing box of this machine contains the following items. Please check carefully whether the following items are complete. If there are any missing items, please contact your local distributor. USER MANUAL THOR T60 TRIPLE LASER TV IN THE BEST WAY POSSIBLE Please read carefully before using Main unit 1 Product user manual 1 Remote control 1 Power cord 3 Lifting screws 4 Prompt Information Please note that the product accessories may be increased or decreased due to product upgrades; the appearance of the remote control shall be subject to the real object. Due to differences in product application in each country (region), the product accessories may vary in some countries (regions). The diagrams in this product manual are only examples, it may differ from the actual product, please refer to the actual product (this statement is throughout this product manual). 1 2 3 01 2. Product Introduction 2.1 Product Specification Product Specification Parameters Product Model U1441 System Andriod Display Laser light source +DLP technology Network connection Wired network + wireless network Resolution 38402160 Method of remote Bluetooth&IR Recommended Display Size 100''

Built-in speakers 15W2 Power Supply 100-240V~, 3A, 50/60Hz Projector size (approx.) 650365150mm / 26146in Port LAN1 COAXIAL1 AUX1 SPDIF1 RS2321 USB2 HDMI2 Net weight of main unit 12.5kg / 27.6lbs Environment Run Port Temperature Relative humidity Temperature Relative humidity 0~35 20%~80%

20~50 20%~80%

EN 02 EN 2.2 Appearance 2.2.1 Main Unit Structure Figs. 1 to 4 Structure 1 2 Fig. 1 45 Left Top LAN COAXIAL SPDIF HDMI 1 HDMI 2 (eARC) USB 2.0

(5V/1A) USB 2.0

(5V/1A) RS-232 AUX 6 7 8 9 3 4 Fig. 2 Front Top 10 11 5 Fig. 3 Rear View Fig. 4 30 Bottom View 03 Main Unit Structure No. Name 1 2 3 4 5 6 7 8 9 10 11 Ventilation mesh Voice emitting hole of built-in speaker Infrared protective sensor Light emitting hole Power key and indicator Ventilation mesh Ports Power input Anti-theft lock hole Lifting screw hole Height adjusting Kickstand 2.2.2 Ports 1 2 3 4 5 6 7 LAN COAXIAL SPDIF HDMI 1 HDMI 2 (eARC) USB 2.0

(5V/1A) USB 2.0

(5V/1A) RS-232 AUX 8 9 Fig. 5 Port Do not plug in / pull out another USB mobile hard disk when there is an USB mobile hard disk is playing on the device. It damage the device or cause other malfunc-

tions due to the huge starting current. HDMI does not support DTS-CD audio decoding. 1 2 EN Port No. Name Function 1 2 3 4 5 6 7 8 9 LAN For wired network connections COAXIAL The "coaxial output" mainly provides the transmission of digital audio signals and can be connected to an external sound system SPDIF Fiber interface for digital audio output HDMI 1 For connection with external devices with HDMI ports HDMI 2 (eARC) For connection with external devices with HDMI ports (ARC) USB USB For connection with USB devices, such as flash disk, mobile hard disk drive, etc For connection with USB devices, such as flash disk, mobile hard disk drive, etc RS-232 Control interface AUX Provide output of analog audio signal

(L/R) 04 EN 2.2.3 Remote Control 14 13 12 11 10 9 8 Fig 6 Remote Control 1 2 3 4 5 6 7 05 No. Name Function Keys and Functions 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Power key Standby switch Up / Down

/ Left / Right On the menu page, they are directions. On non-menu pages, the functions are decided by the system. Return key Return to the previous menu Focus key Open the focus menu Hot key One key goes to APP Volume - key Volume down Voice Control Press to start voice interactive Volume + key Volume up Hot key Hot key One key goes to APP One key goes to APP Home key Call up the main scene Setting Key Open setting menu OK key Enter the page of selection Mute Key Press to open/close mute Matching of remote control The remote controller for this projector bounded with IR and Bluetooth function together. To use remote controller in Bluetooth model, please follow the following guide to pair remote controller with projector at the first using. Fig 7 Remote control pairing EN 06 EN 3. Installation and Commissioning 3.1 Installation According to different application scenarios, the machine supports four installation methods: desktop front projection, desktop back projection, lifting front projection and lifting back projection. 3.1.1 Installation Method The display mode (front desktop, rear lifting, front lifting and rear desktop) needs to be changed and set from the OSD menu due to different applications. Fig. 8 Desktop Front Projection Fig. 9 Desktop Rear Projection Fig. 10 Lifting Front Fig. 11 Lifting Rear 07 EN 3.1.2 Screen Size and Installation Distance The distance between projector and screen is proportionate to display size, the closer the projector and the screen, the smaller the display size. Conversely, the bigger the display size. Please read the screen user manual carefully before installing. Laser Theater is precise optical device, it is recommended to be installed by authorized professional technicians. Please follow the below steps to install. a. Confirm display size and projector position: confirm display size and projector position according to screen size and installation environment;

b. Image position: put projector onto TV bench, and adjust focusing to make image clear , move projector to confirm image size (same as screen display area) and position;

c. Projector position: mark projector position, easy to recover if projector moving is required;

d. Screen position: keep the image stable, mark screen position with the help of screen user manual, move away the projector;

e. Screen installation: install screen according to screen user manual;

f. Projector position: put the projector back to the place which we marked;

g. Adjust image: start projector, adjust focusing, move projector position, make sure the image covers all screen surface. Screen Size and Display Distance Unit: mm / inch Screen Size Display Width Display Height Distance between Projector and Screen 1 Image Height 2 80''

90''

100''

110''

120''

1771 / 69.7 996 / 39.2 1992 / 78.4 1121 / 44.1 2214 / 87.2 1245 / 49.0 2435 / 95.9 1370 / 53.9 90 / 3.5 136 / 5.4 183 / 7.2 229 / 9.0 2657 / 104.6 1494 / 58.8 276 / 10.9 321 / 12.6 348 / 13.7 374 / 14.7 401 / 15.8 428 / 16.9 1. Viewing distance is recommended to be 1.5 times than screen diagonal length, it will influence eye vision if watching screen in near distance for long time. 2. It is recommended to use screen which has the same display ratio as the projector. 3. The above data is for reference only. There may be deviations, please note. Screen Viewing Direction O ptical Bea m-Direction 2 1 Fig. 12 Installation Distance 08 EN 3.2 Picture Adjustment 3.2.1 Adjust Image Position This section takes the installation method of desktop front projection as an example to explain the picture adjustment for user reference. a b According to the picture display, adjust the size and position of the picture by moving the main unit forward, backward, left and right or Connect the power supply and start the main unit;

rotating the height adjustment kickstand. height adjusting screw height adjusting screw Fig. 13 Height Adjusting Screw Following sheet shows the projection image relative 09 Description Appearance Adjustment Description Appearance Adjustment Image smaller than screen Image bigger than screen Image at the left of screen Image at the right of screen Image up from the screen Pull out the projector Image down from the screen Push in the projector down trapezoid Move projector to right Up trapezoid Move projector to left Left trapezoid Move projector up or move screen down Drive the screw counterclockwise the height adjusting screw Drive the screw clockwise the height adjusting screw Move projector counterclockwise Move projector down or move screen up Right Trapezoid Move projector clockwise EN 10 3.2.2 Focus Adjustment 3.2.3 Image Adjustment a. Press the "focus" key or follow the steps below, press the a. Press the remote control "Setting" key -> select "Projector remote control "Setting" key -> select "Projector settings" ->

select "Focus Adjustment";

b. Adjust the focus according to the screen prompts until the screen becomes clear from blurry. settings" -> select "Picture Calibration";

b. After entering the image Adjustment menu, follow the screen prompts to correct the image through the arrow keys on the remote control. c. Press "Reset" to get back to the original layout. Fig. 14 Focus Adjustment Fig. 15 Image Adjustment EN 11 3.2.4 Dolby Vision Adjustment a. Make sure the source supports Dolby Vision before using the function;

b. Press the remote control "Setting" key -> select "Projector settings" ->

select "Dolby Vision";

c. Select the screen size to match your screen. If there is no exact match, select the closest size d. Enter the Gain page and select a number. The numbers are Dolby Vision enhancement levels. It is recommended to try different levels to match the current source. Fig. 16 Dolby Vision Adjustment 3.2.5 Eye Protection Mode a. Press the remote control "Setting" key -> select "Projector settings" -> select "Eye Protection Mode";

b. Press the "OK" to turn on Eye Protection Mode. EN Fig. 17 Eye Protection Mode 3.2.6 Lighting Settings a. Press the remote control "Setting" key -> select "

Projector settings" -> select "Lighting Settings";

b. There are three modes for selection: "Hight Light",

"Standard", "Energy Saving". Fig. 18 Lightning Settings 12 EN 4. Operating Instructions 1 2 Prompt Information Some options in the user's operation interface are not selectable, displayed or hidden automatically in different models, signal sources or states. The user operation interface can be updated through software upgrade. If there is any difference between the user manual and the final product, the actual display shall prevail. 4.1 Boot Guidance Press the "Settings" key to enter the "Device Preferences" interface; Select "About" ->"Factory reset", then you can reset the system. Fig. 19 Boot guidance graphic expression 1 Fig. 20 Boot guidance graphic expression 2 13 4.2 System Home Page a. Press the "Home" key to enter the "Home Page interface;

home page displays a list of commonly used apps. b. The Select the corresponding App icon and hold down the OK key to call out sub-menus such as "Open" and "Sort";

c. Select Apps to open the list of commo d. Use the shortcut icon in the upper left corner of the home e. Use the shortcut icon in the upper right corner of the homepage to access the menus of Notifications, Inputs, Network&Internet, and Settings. page to access the Voice Menu and Search menus;

n Apps;

Fig. 21 System Home Page No. Graphic expression Title 1 2 3 4 5 6 Voice menu Search menu 1 Notifications Inputs Network & Internet Settings EN 14 EN 4.3 Help On the home page, select the Help application icon to open the application. Help is used to briefly introduce the usage methods and procedures of the main functions of the local system. The options include Interface, Homepage, Application, Settings, Google Assistant, Multi-Screen, Disclaimer, and Troubleshooting. Fig. 22 Help 15 No. Item Instruction 1 2 3 4 5 6 7 8 Interface Describes the connection mode and usage of each interface on the TV body Homepage The use and introduction of TV home page function Application Settings Google Assistant This section describes how to search for, download, install, uninstall, and upgrade apps in the Google Play Store and Amazon Prime Video This paper introduces how to set the access mode of TV network, Channels management, steps to log in to TV with Google account, application management, device preference setting, Bluetooth pairing and operation method of checking system update. This section describes how to use Google Assistant Multi-Screen List the possible failures of TV hardware function modules and their solutions Disclaimer Display disclaimer Troubleshoot-

ing List the possible failures of TV hardware function modules and their solutions 4.4 TV Manager You can enter it by clicking the TV Manager app icon on the home page or in the list of apps. TV Manager includes Usage detection, Optimize, Clean, Memory Boost, Uninstall Apps, Install Apps, and Intelligent Diagnosis. EN Fig. 23 TV Manager 16 EN 4.5 Media Player a. Select the Media Player application icon from the App list on the home page;

b. The media center supports audio and video file playback control, picture presentation and application installation;

c. The media center divides multimedia content into four typ es: video, picture, music and all types. Browse related content by selecting corresponding categories;

d. The media center supports file browsing and access from external storage devices. 4.6 Settings Setting menu opening mode:

a. b. c. d. Click the icon in the upper right corner of the home page;

Press the remote control Settings button to enter. At this point, the items displayed in the Settings menu may be different in different application scenarios;

In Live TV, press the remote control button and click

"Settings" to enter the Settings menu;

On the home page, the Settings icon is displayed. Tap to access the Settings menu. Fig. 24 Media Player Fig. 25 Settings 17 Settings menu list Projector Settings menu list No. Item Instruction No. Item Instruction EN 1 2 3 4 5 6 7 Network & Internet Network Connection menu Parental Control The password for Parental Control is a four-digit password set in the boot wizard Projector Setting Laser TV commonly used setting menu Accounts & Sign-in After the network connection is successful, log in as prompted Apps App view and permission management menu Device Preferences Device preferences menu Remotes &

Accessories Bluetooth Device Management menu 1 2 3 4 5 6 Dolby Vision Display different screen sizes according to the distance Picture Calibration Image correction menu Focus Adjustment Focusing menu Display Mode Display mode selection menu Eye Protection Mode Eye protection mode switch Lighting Settings Light Settings menu 18 EN 5. Safety Precautions This machine contains a laser module. For your safety, please follow the tips below. Precautions Do not look directly at the bright light from machine, otherwise it may cause eye injury. Do not open or disassemble the machine, which may cause damage due to exposure to laser radiation. Do not use any optical instruments (such as magnifying glass and microscope for experiments) to observe the laser output, otherwise Viewing Direction Screen eye injury may be caused. Wear professional laser protection glasses when there is a need to have direct contact with the bright light. Prompt Information: The product is evaluated to be Class 1 according to IEC/EN60825-1: 2014. O ptical Bea m-Direction For your safety, please select the right viewing direction. Fig. 26 Viewing Direction 1 2 3 4 5 6 19 Precautions 1 2 3 4 5 6 7 8 9 10 11 12 As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015. Do not install the machine on unstable tables and shelves. The product might fall in that case. Please insert the power plug completely into the power socket and ensure that the power plug is placed in an accessible position. Do not pull the power cable itself. When pulling out the power cord, please hold the plug instead of the cable. When the machine is moved from a low temperature environment to a high temperature environment, condensation may occur inside the machine. Please do not turn it on immediately. In case of any abnormality or malfunction, such as no image, no sound, smoking or unusual odor, please disconnect the power supply immediately, unplug and contact our after-sales service personnel to open the machine for inspection. Do not block the air vent and install the machine in a well-ventilated place to prevent the machine from overheating. Do not use flammable materials such as books or cardboard to block the light beam emitted by the machine. Flammable materials may melt or ignite objects or even cause fire when exposed to the light beam for a long time. Do not place the machine directly in areas with poor ventilation such as carpets, cushions, bookshelves or closets. To facilitate ventilation, please ensure that the distance between the ventilation opening of the machine and the wall is greater than 30cm. Do not place flammable spray or other flammable substances beside this machine. If there is a gas leak, please do not touch or switch the socket. Open the window immediately for ventilation. EN 20 EN 13 14 15 16 17 18 19 1 2 3 4 5 6 21 Do not place any objects on top of the machine. When installing the machine by hoisting, professional technicians shall use corresponding professional tools for installation. Improper installation may cause the machine to fall, thus causing personal injury or damage to the machine. Do not install the unit in a damp environment. Do not place any liquid in the accessories of the machine. Please contact your dealer or Ultimea After-sales Service Center for inspection, adjustment or maintenance. Non-professional operation may cause electric shock or damage to the machine. Risk of explosion if the battery is replaced by an incorrect type. If the machine is not used for a long time, please remove the power supply and cover the machine with dust bag. Clean When cleaning, do not spray the machine directly with any liquid to prevent moisture from entering the machine. Remove the power plug before cleaning the unit. Please wipe the surface of the machine gently with a soft cloth. Do not use alcohol, wax, or thinner when cleaning plastic parts. The surface may change or discolor. Do not touch or wipe the lens with hands or ordinary cleaning cloth. To remove dust from the lens, please use a blowing dust ball. Please clean the dust on the vent window net regularly to avoid the high temperature of the machine caused by dust accumulation. Battery Do not mix old and new batteries or different brands of batteries. Please install the battery correctly according to the polarity mark when using. When the remote control is not used for a long time or the battery is run out, please remove the battery to prevent leakage. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Do not charge non-rechargeable batteries. Please place the spent battery in the designated disposal area. 1 2 3 4 5 6 7 8 6. Recycling It indicates that packaging materials can be recycled, please do not discard them at will. It indicates that the environmental protection service life of the product is 10 years under normal working and using conditions, and the product can be used safely within the environmental protection service life. In order to protect the environment, used batteries and products can be recycled by regular dealers or manufacturers. Please do not discard them at will. EN 22 EN 7. Trademark HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator,Inc. Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories.Confidential unpublished works. Copyright 2012-2022 Dolby Laboratories. All rights reserved. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. In the United States and other countries. 2021 DTS, Inc. All rights reserved. The DLP logo are registered trademarks of Texas Instruments. The device complies with the EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and Audio Equipment Directive 2014/53/EU. 8. Statement Without the permission of the Company, none of the contents of this product manual is allowed to be reproduced, transmitted, transcribed or stored in a retrievable system in any form, or translated into other languages. The contents of this user manual are subject to change without prior notice. 23 FCC STATEMENT:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. ISED WARNINGS This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppe-ment conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) L'appareil ne doit pas produire de brouillage;

(2) L'appareil doit accepter tout brouillage radiolectrique subi, mme sile brouillage est susceptible d' en compromettre le fonctionnement. Le prsent appareil est conforme Aprs examen de ce matriel aux conformit ou aux limites d'intensit de champ RF, les utilisateurs peuvent sur l'exposition aux radiofrquences et compliance d'acqurir les informations correspondantes. La distance minimale du corps utiliser le dispositif est de 20cm. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator&your body. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interfer-

ence in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communica-

tions. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by one or more of the following mea-

sures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity We (Manufacturer is responsible for this declaration) Dynanic (Shenzhen) Technology Limited 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District, Shenzhen,China Declare under our sole responsibility that the product Trade name: ULTIMEA Equipment: Projector Model No.: U1441 To which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approxmation of the laws of the Member States relating to LVD Directive (2014/53/EU)&Rohs (2011/65/EU) product is responsible to affix CE marking,the following standards were applied:

EN IEC 62311:2020 ETSI EN 301 489-1 V2.2.3(2019-11) ETSI EN 301 489-17 V3.2.4(2020-09) EN 55032:2015 EN 55035:2017 EN 61000-3-2:2019 EN 61000-3-3:2013+A1:2019 IEC 62321-3-1:2013 IEC 62321-5:2013 IEC 62321-4:2013+AMD1:2017 IEC 62321-6:2015 IEC 62321-7-2:2017 IEC 62321-6:2015 IEC 62321-8:2017 Signature: Date: 2023.09.01 Thor T60 Triple Laser TV U1441 If you need our support, kindly reach out to our service team. We are always glad to help.

Prete: Thr TEOTise Laser Mol mba U4 Dreooute Powe Corer 2058 Samra Powrln 1OD240V AC SOOM: 265 Nasce Nan cleraeort com he propctrs can arise okt sec

[P= ectereer 2000 Harte. comay Fe ce &

carrimnsse 4 ROHS Mapdacurer Ure Tetra (Shreten) Unies rn 200 Pour Bu eran Cas Pa, Brn , Largan Dt, Shercen Chr 8000 ULTIMEA re doen cpl wh Pat 5 he FC den

C5266091_X24_Ed.2 Attestation Statements that prohibit equipment authorization TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Ultimea Technology (Shenzhen) Limited Grantee code: 2A9OO FCC ID: 2A9OO-U1441P FRN: 0033166620 Contact Name: Yoyo.yu Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District, Shenzhen, China Telephone: 0755-23762801 Fax: 0755-23762801 E-mail: Yoyo.yu@substanbo.com i. ii.

[Ultimea Technology (Shenzhen) Limited] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Ultimea Technology (Shenzhen) Limited] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification.

[Ultimea Technology (Shenzhen) Limited] (the applicant) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing coveredequipment . Date: 2024/03/12 Applicants Name: Yoyo.yu Title: Manager Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

Ultimea Technology (Shenzhen) Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-03-12 Subject: Request for Confidentiality FCC ID: 2A9OO-U1441P To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality Short-Term Confidentiality NOTE 2 No No No No No No No No No No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Yoyo.yu Title: Manager Date: 2024-03-12 Signature of applicant:

1/1

Ultimea Technology (Shenzhen) Limited Letter of Authorization Company: Ultimea Technology (Shenzhen) Limited Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District, Shenzhen, China Product Name: Thor T60 Triple Laser TV Model Number: U1441 FCC Identifier: 2A9OO-U1441P We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Yoyo.yu Title: Manager Date: 2024-03-12 Signature of applicant:

1/1

Ultimea Technology (Shenzhen) Limited FCC Software Configuration Control Declaration Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Company: Ultimea Technology (Shenzhen) Limited Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District, Shenzhen, China Product Name: Thor T60 Triple Laser TV Model Number: U1441 FCC Identifier: 2A9OO-U1441P Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration controI, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Yoyo.yu Title: Manager Date: 2024-03-12 Signature of applicant:

US Agent for Service of Process LETTER OF ATTESTATION

+1 888-598-8875 monica.lin@substanbo.com TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process:

Company Name: Dynanic Inc. FRN: 0033593849 Contact Name: Monica Lin Address: 16192 Coastal Hwy Lewes DE 19958,United States Telephone No:

Email:

Applicant:

Company name: Ultimea Technology (Shenzhen) Limited Grantee code: 2A9OO FCC ID: 2A9OO-U1441P FRN: 0033166620 Contact Name: Yoyo.yu Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District, Shenzhen, China Telephone: 0755-23762801

[Ultimea Technology (Shenzhen) Limited] certifies that, as of the date of this filing of the application with the TCB, [Dynanic Inc.] is our designated US agent for service of process for the above referenced FCC ID. [Ultimea Technology (Shenzhen) Limited]

accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Dynanic Inc.] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Date: 2024/03/12 Fax: 0755-23762801 E-mail: Yoyo.yu@substanbo.com Applicants Name: Yoyo.yu Title: Manager Signature US Agents Name: Monica Lin Title: Manager Signature 1/1