all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 1.45 MiB | August 31 2020 | |||
1 |
|
Int photo | Internal Photos | 558.78 KiB | August 31 2020 | |||
1 |
|
Ext photo | External Photos | 849.73 KiB | August 31 2020 | |||
1 |
|
label | ID Label/Location Info | 248.40 KiB | August 31 2020 | |||
1 |
|
Agent Authorization | Cover Letter(s) | 113.30 KiB | August 31 2020 | |||
1 | Block | Block Diagram | August 31 2020 | confidential | ||||
1 |
|
FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 264.22 KiB | August 31 2020 | |||
1 | Operational Description | Operational Description | August 31 2020 | confidential | ||||
1 |
|
SAR CALIBRATION DATA | RF Exposure Info | 4.42 MiB | August 31 2020 | |||
1 |
|
SAR Test photo | Test Setup Photos | 303.48 KiB | August 31 2020 | |||
1 |
|
SAR report | RF Exposure Info | 3.92 MiB | August 31 2020 | |||
1 | SCH | Schematics | August 31 2020 | confidential | ||||
1 |
|
Test photo | Test Setup Photos | 364.87 KiB | August 31 2020 | |||
1 |
|
Test report | Test Report | 4.20 MiB | August 31 2020 |
1 | User manual | Users Manual | 1.45 MiB | August 31 2020 |
BiT-4 USERS MANUAL ChatterBox UNIMO Technology Co.,Ltd. CONTENTS Installation of Speaker and Microphone Installation of cradle, bracket and BiT-4 main device 1. GETTING STARTED Main features Package contents Battery charging Battery 2. INSTALLATION 3. BUTTONS AND PORT 4. BASIC FUNCTIONS Power on / off Volume up / down Automatic power off Voice command 5. SMART-PHONE CONNECTION Smart-phone pairing Second Smart-phone pairing 6. MODE CHANGE Music mode FM radio mode 1:1 Intercom mode New Smart-phone (the third Smart-phone) replacement Universal Intercom mode 4 Riders Multi-Intercom mode Surround Monitoring mode Battery power level 7. PHONE FUNCTION Answering incoming call Rejecting incoming call Hanging up the call Automatic answering Holding the current call, answering an incoming call While in calling, rejecting another incoming call Last number redialing & Speed dial While being on the phone, switching device between BiT-4 and Smart-phone Switching music between two paired Smart-phones 8. MUSIC MODE Enter / Exit music mode Music play / stop Fast-forward / Rewind Music sharing 9. FM RADIO MODE Entering / Exiting FM radio mode Playing / Muting FM radio Scanning channel up / down Saving channel Saved channel up / down 10. INTERCOM MODE Volume control in Intercom mode 1:1 Intercom pairing 1:1 Intercom connection / disconnection Audio Multi-Tasking 4 Riders Multi-Intercom pairing 4 Riders Multi-Intercom connection / disconnection 4 Riders Multi-Intercom reconnection and reposition 1:1 Intercom automatic re-connection 11. UNIVERSAL INTERCOM PAIRING Universal Intercom pairing with BiT-4 set as a master Universal Intercom pairing with Non-ChatterBox product set as a master Universal Intercom connection / disconnection Conference call between 1:1 intercom & Universal Intercom 12. SURROUND MONITORING MODE 13. SET UP MODE Language Music sharing VOX Side Tone Reset Exit 15. SMART-PHONE APPLICATION CONTROL 14. RESET Reset Factory Reset 16. SOFTWARE UPGRADE 17. SUPPORT Precaution Limited warranty Limitation of liability Reasons for limited liabilities Disclaimer of liability Customer service center 1. GETTING STARTED helmet. Main features Bluetooth V 4.1 4 Riders Multi-Intercom 18. FAQ (Frequently Asked Questions) 19. CE/FCC DECLARATION 20. SIMPLE MANUAL 1:1 Intercom maximum range up to 700 meters (Refer to FAQ) Thank you for choosing our ChatterBox BiT-4, Bluetooth Communication System for Motorcycle 5 Languages voice prompt (English, French, German, Italian, Spanish) Dual pairing with two Bluetooth devices (Smart-phone, MP3, Navigation etc) Universal Intercom FM Radio Music sharing Surround monitoring Audio Multi-tasking Answering phone call using VOX Side Tone (Listening own voice during phone conversation) Smart-phone Application Control Usable during charging Volume of each mode is separately adjustable during Intercom communication Allowing Intercom to stay connected during a phone conversation User upgradable firmware Water Resistance Package contents BiT-4 Main device with a built-in battery USB charging data cable Microphones for both open-face and full face helmets Speaker, Velcro for speaker, Velcros for microphones and a Butterfly Mic-holder, Helmet mounting cradle, Metal Bracket, 2 screws and L-wrench User manual, Chatterbox Logo sticker Battery charging Connect the supplied USB charging data cable with a PC or wall charger. Be sure to charge the product using the USB charging data cable provided. Charge with a normal charger of 5V or less than 1.2A. Using a high-speed charger for Smart-phones or a supplementary battery with high-speed charging (9V, higher than 1.2A) may inflate the battery, cause an explosion, or damage internal circuits. With a normal charger, it takes 2.5~3 hours to fully charge. Charging time depends on the temperature. The Red LED flashes while charging and the Blue LED lights and stay showing the charging is finished. If the charging is finished disconnect the charging cable. Overcharging may cause battery inflation and damage the battery. You can charge BiT-4 with a power bank (an external battery pack) while you are using it. In this case, the Red LED and Purple LED (Red and Blue LED at the same time) flash alternately. When the charging is finished, the LED turns and flashes to Blue. Battery Please read the following notes. The battery of this product cannot be replaced by user. Always keep your battery charged enough. Every battery discharge by itself naturally. If the battery was discharged and not charged for a long time, the voltage drops under 2.0V, the battery can not be charged again. In this case, you need to replace the battery if battery replacement is applicable. However, this replacement can not be covered by warranty. Do not disassemble the product or do not try to replace the battery. It may cause product failure. Warranty repair can not be applicable. Battery capacity may be reduced depending on environmental factors and usage. Life cycle of Lithium Ion, or Lithium Polymer battery, battery manufacturer guarantees 300 times of full charges and discharges. Use or store the product at -15C and +50C. Higher or lower temperatures may temporally cause reduced battery capacity, battery life, or temporary inactivity. Long exposure of the product to direct sunlight in a hot temperature may cause circuit failure or battery failure. Do not use any product damaged by impact, circuit or battery failure may occur. 2. INSTALLATION Speaker and Microphone Installation Both microphones for open-face and full-face helmets are provided. Please choose the one that you intend to use for the type of your helmet. Remove the inner pad of the helmet where you want to locate the speakers and microphone. Make sure to clean inside of your helmet with alcohol and fully dry the spot where you want to put the Velcro for the speakers and microphone. For open-face helmet, attach soft Velcro disk inside of the helmet at your chic level and place the boom-microphone on it and set the white dot on the Microphone-head to face your mouth. Additionally, fix the boom-stick by using the butterfly shaped holder to support it. For full-face helmet, attach soft Velcro disk on the chin bar of the helmet and attach hard Velcro disk to the microphone. It is recommended to fix wires with tapes. Mount the soft Velcro disks on the liner of your helmet, in the indented part of the helmet padding, where your ears would line up. For the best sound quality, be sure to locate the speakers to the right location. Attach the right speaker (with the longer wire) to the corresponding Velcro disk that you applied on the helmet liner. Attach the left speaker (with the shorter wire) to the other Velcro disk. Re-install removed inner pad back on the helmet CAUTION: Repositioning of the Velcro stickers of the speakers and microphones more than one time may result in poor adhesion. ( Velcro stickers are available on the website, http://www.chatterboxglobal.com/) Open-Face microphone Ultra Slim Full-face microphone Speakers Cradle and Bracket Installation of cradle, bracket and BiT-4 main device 1. Prepare the provided cradle, bracket, screws and L-wrench. 2. Attach the metal bracket with rubber to face cradle to the cradle using screws but do not fully 3. Slide the bracket iron plate into the gap between the helmet shell and the inner pad of the left 4. Now tighten the screws on the bracket to fit the cradle to the helmet firmly using the L wrench. 5. Connect the microphone and speakers to the cradle. Make sure to match the arrow at the end 6. Insert the guide fin on the back of the product along the slide of the cradle and push it down tighten at this stage. side. of the plug and jack. until you hear the 'click' sound. CAUTION: If screws of the cradle are over-tightened, back of cradle may be bended and this may result in difficulty setting the BiT-4 main device on the cradle or main product may fall off by shock or vibration. 3. BUTTONS AND PORT 4. BASIC FUNCTIONS Power On/Off: Long press POWER BUTTON for 3 seconds. Volume Up: Press the PLUS BUTTON with intervals of longer than 0.5 seconds. Volume Down: Press the MINUS BUTTON with intervals of longer than 0.5 seconds. CAUTION: Fast double-pressing within 0.5 seconds will result in searching next / previous song in Music mode OR that will result in scanning up and down channels in FM radio mode. Automatic Power-Off: If the BiT-4 main device is not in operation for longer than 60 minutes, the device will automatically be turned off to save the battery. Automatic Power-off function can be controlled through the Smart-phone application. However, this function will not be off while a phone call, Intercom call, Music play and FM radio are operating Voice Command function of your Mobil-phone:
To activate Voice Command function in your Smart-phone through BiT-4 device, after stopping Music or FM radio, long press PLUS BUTTON longer than 1 second. But make sure the voice recognition function of your Smart-phone is activated. 5. SMART-PHONE CONNECTION Smart-phone Pairing Make sure your BiT-4 device is powered off. Press and hold POWER BUTTON for 8 seconds until the LED turns and flashes in Red and Blue alternately. [Voice Prompt: Bluetooth pairing]
Turn on the Bluetooth function in your Smart-phone and search and select the name of the device (ChatterBox BiT-4 Vxx) Certain Smart-phones may require a password <Password: 0000>
After pairing is completed, the Blue LED slowly flashes in every 2 seconds. [Voice Prompt:
After pairing is finished, turn the power off and then turn on the device again in order to prevent Bluetooth Connected]
a sudden volume increase. NOTE for iPhone users: After the pairing is done, please set the device at the minimum volume level to prevent sudden volume increase. (Delete) Second Smart-phone pairing Pairing sequence is exactly the same as the first Smart-phone pairing. CAUTION: Please make sure that you turn off the Bluetooth function of the first paired-Smart-phone before starting the second Smart-phone pairing. New Smart-phone (the third phone) replacement Turn off one of the previously paired Smart-phonesBluetooth functions or delete the paired device's name (ChatterBox BiT-4 Vxx) from the connected Bluetooth device list in the Smart-phone set up menu. Pairing sequence is exactly the same as the first Smart-phone pairing. 6. MODE CHANGE Music Mode:
Short double-press the FUNCTION BUTTON. FM radio Mode:
Short double-press FUNCTION BUTTON. 1:1 Intercom Mode: (Rider & Passenger Intercom) To connect Intercom: Short press POWER BUTTON. To disconnect Intercom: Short press POWER BUTTON again. Intercom Pairing must be preceded Universal Intercom Mode :
To connect Intercom: Short double-press POWER BUTTON. To disconnect Intercom: Short double-press POWER BUTTON again. Universal-Pairing must be preceded 4 Riders Multi-Intercom Mode :
To connect Intercom: Short press INTERCOM BUTTON once. To disconnect Intercom: Short double-press INTERCOM BUTTON. Multi-Intercom-Pairing must be preceded Surround Monitoring Mode:
To activate : Long press the CRADLE BUTTON for longer than 2 seconds To deactivate : Long press the CRADLE BUTTON for longer than 2 seconds Simultaneously short press PLUS and MINUS BUTTONs, then voice prompts will announce the Check Battery Power Level :
battery power capacity in 6 levels. 5 = 100%
4 = 80~100%
3 = 60~80%
2 = 40~60%
1 = 20~40%
Low Battery = 0~20%
7. PHONE FUNCTIONS Answering an incoming call: Press the FUNCTION BUTTON shorter than 1 second. Rejecting an incoming call: Press the FUNCTION BUTTON longer than 1 second. Hanging up the call: Press the FUNCTION BUTTON longer than 1 second. Automatic answering: If you take no action for an incoming call for 20 seconds, device will answer automatically. (This function can be adjusted by Smart-phone Application Control.) Holding the current call, answering another incoming call: Press the FUNCTION BUTTON shorter than 1 second. As soon as the second call ends, the phone connection automatically transfers While being on the phone, rejecting another incoming call: Press the FUNCTION BUTTON longer to the first call. than 1 second. Last number redialing & Speed dial To activate redial function: After stopping music or FM radio, press the MINUS BUTTON longer than 1 second. [Voice Prompt: Redial]
To redial the last number: Press the FUNCTION BUTTON To dial saved phone numbers: After hearing the voice prompt of Redial, press the PLUS or MINUS Button to select a speed dial and press the FUNCTION BUTTON to call [Voice Prompt: One, Two, Three]
Phone numbers can be saved through Smart-phone Application While being on the phone, switching device between BiT-4 and Smart-phone:
If you want to take off your helmet in the middle of phone conversation and you want to talk on your Smart-phone directly, press and hold the PLUS and MINUS BUTTONs simultaneously for longer than 1 second, then the call switch over from BiT-4 to your Smart-phone. In order to switch over back to BiT-4, do the same operation. 8. MUSIC MODE mode]
Enter / Exit music mode: Short double-press the FUNCTION BUTTON. [Voice Prompt: Music play Music Play / Stop: Short press FUNCTION BUTTON. [Voice Prompt: Music play / mute]
Fast-forward: Short double press PLUS BUTTON within 0.5 seconds. [Voice Prompt: Beep sound]
Rewind: Short double press MINUS (-) BUTTON within 0.5 seconds. [Voice Prompt: Beep sound]
Switching music between two Smart-phones paired to one BiT-4 device: Press the FUNCTION BUTTON longer than 1 second (Short press the FUNCTION BUTTON again to play music of your second Smart-phone.)
[Voice Prompt : ONE for the first Smart-phone]
[Voice Prompt : TWO for the second Smart-phone]
As two Smart-phones are paired to one BiT-4, a short-delay or a short-disconnection in music playing might occur. For certain types of Smart-phone, music volume can be controlled simultaneously or separately. How to pair two BiT-4 devices for Music Sharing Place two BiT-4 devices close to each other to pair for sharing music Short press the FUNCTION BUTTON to enter the SET UP mode for the both, and then search for the Music sharing function by pressing PLUS or MINUS BUTTON. As you find Music sharing, press the FUNCTION BUTTON to select. Then, LED alternately flashes in Red and Blue [Voice Prompt: Music Pairing]
After Music sharing is paired on the both phones, LED turn and flash to Blue [Voice Prompt : Music Connected]
Music Sharing disconnection: Simultaneously press Music Sharing disconnection: Simultaneously press PLUS and FUNCTION BUTTON FUNCTION BUTTON until you hear a Music Sharing reconnection: Simultaneously press Music Sharing reconnection: Simultaneously press PLUS and FUNCTION BUTTON FUNCTION BUTTON until you hear a Beep sound. Beep sound. If BiT-4 is paired with two Smart Smart-phones, you can not use the Music Sharing function. s, you can not use the Music Sharing function. 9. FM RADIO MODE Mode]
Enter / Exit FM radio mode : Short double Short double-press FUNCTION BUTTON. [Voice Prompt:
[Voice Prompt: FM radio Play / Mute FM radio : Short press Short press FUNCTION BUTTON once. [Voice Prompt:
Voice Prompt: Play / Mute]
Scan channel up: Short double Short double-press PLUS BUTTON within 0.5 seconds. Scan channel down: Short double Short double-press MINUS BUTTON within 0.5 seconds. Voice Prompt will announce the channel number.
** As a channel is scanned, Voice Prompt will announce the channel number. Save channels: After a channel is selected, within 10 seconds After a channel is selected, within 10 seconds, press the FUNCTION FUNCTION BUTTON longer than 1 second. Maximum 8 channels can be saved in order. Maximum 8 channels can be saved in order. [Voice Prompt: Channel 1~8 Save Channel 1~8 Save]
Previously saved channel up
/ down: Press PLUS BUTTON or MINUS BUTTON MINUS BUTTON longer than 1 second. [Voice Prompt: Saved Saved 1~8 Channel and Radio Frequency]
10. INTERCOM MODE Volume control of the Intercom conversation: Press and hold the Volume control of the Intercom conversation: Press and hold the PLUS or MINUS MINUS BUTTON until a volume level you want is reached, then want is reached, then release the PLUS or MINUS BUTTON. [Beep]
. [Beep]
1:1 Intercom Pairing Place two devices to pair close to each other. Long press INTERCOM BUTTONs of both devices for 3 seconds until the LED flashes in red and blue alternately. [Voice Prompt: Pairing]
Short press INTERCOM BUTTON of the device to be set as a Master. [Voice Prompt: Intercom Pairing] Then, Red LED flashes fast to enter pairing mode. As pairing is completed, the Green LED flashes. As your device is already connected with one device, in case that you wish to pair with another device, press INTERCOM BUTTON for 6 seconds. 1:1 Intercom Connection / Disconnection:
To connect: Short press POWER BUTTON [Voice Prompt: Intercom 1 connected]
To disconnect: Short press POWER BUTTON [Voice Prompt: Intercom 1 disconnected]
Even if 1:1 Intercom communication is interrupted by a phone call, the Intercom communication can stay in connection with diminished sound. After hanging up the phone call, Intercom volume comes back to normal sound level. During 1:1 Intercom conversation, changing the saved FM radio channels, Redial last number, and voice command function can not be operated. 4 Riders Multi-Intercom Pairing Place two devices to pair close to each other. Long press INTERCOM BUTTONs of both devices for 3 seconds until the LED flashes in Red and Blue alternately. [Voice Prompt: Pairing"]
Double press INTERCOM BUTTON of the device to be set as a Master. [Voice Prompt :
Group Pairing] Then, Blue LED flashes fast to enter multi pairing mode. As pairing is completed, a Green LED flashes. [Voice Prompt : Connected 1(numbers of other devices connected to your device) / Connected 2(numbers of other devices connected to your device)]
The second and the third device will be paired in the same pairing procedure. Each device The second and the third device will be paired in the same pairing procedure. Each device The second and the third device will be paired in the same pairing procedure. Each device can have only one Master and one can have only one Master and one Slave. As your device is already connected with one device, in case that you wish to pair with another As your device is already connected with one device, in case that you wish to pair with another As your device is already connected with one device, in case that you wish to pair with another device, press INTERCOM BUTTON for 6 seconds. device, press INTERCOM BUTTON for 6 seconds. After the Multi-Intercom pairing is completed, each device pairing is completed, each device will be given a number among among 1 to 4. Your number and the others number can be notified by press the number can be notified by press the CRADLE BUTTON. Check your given number: Short press the
: Short press the CRADLE BUTTON. Check numbers of other devices devices connected to your device: Double press the CRADLE BUTTON. CRADLE BUTTON. The Intercom conversation is not interrupted by a new incoming call. As soon as the phone rings, the The Intercom conversation is not interrupted by a new incoming call. As soon as the phone rings, the The Intercom conversation is not interrupted by a new incoming call. As soon as the phone rings, the Intercom stays connected in a diminished sound. After the phone is hung up, the sound level of Intercom comes Intercom stays connected in a diminished sound. After the phone is hung up, the sound level of Intercom comes Intercom stays connected in a diminished sound. After the phone is hung up, the sound level of Intercom comes back to normal. While being in the Multi-Intercom Intercom communication, the changing saved channels of FM radio FM radio, Re-dialing the last number called, Dialing the saved number, and Voice command are unable to function. last number called, Dialing the saved number, and Voice command are unable to function. last number called, Dialing the saved number, and Voice command are unable to function. Audio Multi-Tasking Audio Multi-Tasking allows the the 4 Riders Multi-Intercom can maintain the Intercom Intercom communication without being interrupted by a phone call, Music ted by a phone call, Music or FM radio sound. Briefly, you can listen to Music, Briefly, you can listen to Music, FM radio, and can make a Phone call while
, and can make a Phone call while keeping the Intercom communication Intercom communication. Each volume of Intercom conversation, phone call, music sound, or Each volume of Intercom conversation, phone call, music sound, or FM radio can separately adjustable. can separately adjustable. Multi-Intercom Connection / Disconnection:
Connection / Disconnection:
Multi-Intercom connection: Short press connection: Short press INTERCOM BUTTON
[Voice Prompt: Connected 1(Connected Connected device number)]
Multi-Intercom disconnection: Short double
: Short double-press INTERCOM BUTTON
[Voice Prompt: Disconnected 1(
1(Disconnected device number)]
4 Riders Multi-Intercom Re-
-connection and Reposition:
In case that Intercom pairing is disconnected, your device searches the closest device near you in order to In case that Intercom pairing is disconnected, your device searches the closest device near you in order to In case that Intercom pairing is disconnected, your device searches the closest device near you in order to There will be a BEEP sound in every in every 20 seconds while disconnected Intercom device is searching for another 20 seconds while disconnected Intercom device is searching for another reconnect. device to pair. There will be a triple BEEP sound from the device which be a triple BEEP sound from the device which is no longer searching for other other devices. Intercom can be reconnected by pressing the INTERCOM BUTTON INTERCOM BUTTON. 1:1 Intercom Automatic Re-
-connection If 1:1 Intercom conversation is disconnected by a distance or poor signal, your device will search for the If 1:1 Intercom conversation is disconnected by a distance or poor signal, your device will search for the If 1:1 Intercom conversation is disconnected by a distance or poor signal, your device will search for the previously paired device to reconnect for 2 minutes. previously paired device to reconnect for 2 minutes. While being connected in the While being connected in the Multi-Intercom pairing, your device can also be pairing, your device can also be connected with 1:1 Intercom OR Universal Intercom connection. But, Intercom OR Universal Intercom connection. But, Maximum 4 devices or less should be or less should be connected. 11. UNIVERSAL INTERCOM PAIRING UNIVERSAL INTERCOM PAIRING ChatterBox brands which support Universal Intercom BiT-4 can be paired with Non-ChatterBox brands which support Universal Intercom ChatterBox brands which support Universal Intercom connection in the manner of 1:1 Intercom connection. Intercom connection. Universal Intercom pairing method in case that BiT-4 is set as a master Universal Intercom pairing 4 is set as a master Place two devices to pair close to each other. Long press INTERCOM BUTTON for 3 seconds until the Red and Blue LEDs flash alternately. Double press INTERCOM BUTTON of BiT-4. [Voice Prompt: Group Pairing] Then, Blue LED Now, BiT-4 is ready to be paired. Please refer to a user manual of Non-ChatterBox product to
[Voice Prompt: Pairing]
flashes fast to enter Universal pairing mode. find out the method of universal pairing. Universal Intercom pairing method in case that Non-ChatterBox product is set as a master:
Place two devices to pair close to each other. Long press INTERCOM BUTTON for 3 seconds until the Red and Blue LEDs flash alternately. And then wait until Non-ChatterBox product search BiT-4 to pair. [Voice Prompt : Pairing]
Please refer to a user manual of Non-ChatterBox product to find out the method of universal pairing. Universal Intercom Connection / Disconnection Universal Intercom Connection: On OFF state, short double-press POWER BUTTON
[ Voice Prompt: Intercom 2 connected]
Universal Intercom Disconnection: Short double-press POWER BUTTON
[Voice Prompt:Intercom 2 disconnected]
Universal Intercom Connection or disconnection by using BiT-4 INTERCOM BUTTON is capable only if BiT-4 is set as a master. Audio Multi-Tasking: In case that BiT-4 is set as a master, Universal Intercom can be simultaneously operated with FM radio or Music. Even if Universal Intercom communication is interrupted by a phone call, Universal Intercom communication can stay in connection with diminished sound. After hanging up the phone call, the Universal Intercom volume comes back to normal sound level Intercom connection between 1:1 Intercom & Universal Intercom In case that BiT-4 is set as a Master in the Universal Intercom Mode, this universally paired BiT-4 can be paired with 1:1 Intercom. Its pairing method is same with the pairing method stated above. 12. SURROUND MONITORING MODE seconds. 13. SET UP MODE In case that you want to hear external sound without taking off your helmet, long-press the CRADLE BUTTON at the bottom of the cradle for 2 seconds. To exit, long press the CRADLE BUTTON for 2 After stopping Music or FM radio function, simultaneously press PLUS and MINUS BUTTON for the 3 seconds in order to enter the set up mode. [Voice Prompt: config]
To search the option through Set up menu, press PLUS or MINUS BUTTON. Once you find the option you were looking for, short press the FUNCTION BUTTON to save. Taking no action for 10 seconds may result in ending the SET UP mode. SET UP PROCEDURE
(1) LANGUAGE SET UP Five languages (English, French, German, Italian, and Spanish) of Voice Prompt are available. After hearing Voice prompt of Language, short press the FUNCTION BUTTON to enter. Press the PLUS or MINUS BUTTON to search Language you desire and then, short press the
[Voice Prompt: Language]. FUNCTION BUTTON to save. After the language is saved, power of BiT-4 will be off [Voice Prompt: Save]. As you turn on the power again, the saved language will be available. After hearing Voice prompt of Music Pairing, short press the FUNCTION BUTTON to enter. Press the PLUS or MINUS BUTTON to search Music Sharing mode and then, short press the
(2) MUSIC SHARING MODE
[Voice Prompt: Music Pairing]. FUNCTION BUTTON to save.
(3) VOX SET UP VOX is a function to answer an incoming phone call by using loud voice or shouting without using any button. (As a phone rings, taking no action would lead to an automatic answer in 20 seconds) After hearing Voice prompt of VOX, short press the FUNCTION BUTTON to enter. [Voice Press the PLUS or MINUS BUTTON to search a VOX sensitivity you desire and then, short Prompt: VOX]. press the FUNCTION BUTTON to save. VOX sensitivity in order: VOX0 -> VOX1 -> VOX2 -> VOX3 -> VOX0 VOX 0: VOX off - disables VOX function. VOX 1: Highly sensitive. (There is a risk of V OX operating even by small noise.) VOX 2: Normal sensitive. (Factory default setting) VOX 3: Less sensitive. (Loud voice is required)
(4) SIDE TONE ON / OFF
[Voice Prompt: Mic]. FUNCTION BUTTON to save. After hearing Voice prompt of Mic, short press the FUNCTION BUTTON to enter. Press the PLUS or MINUS BUTTON to search ON or OFF state and then, short press the After hearing Voice prompt of Reset, short press the FUNCTION BUTTON to save. [Voice After hearing Voice prompt of Exit, short press the FUNCTION BUTTON to save. [Voice
(5) RESET Prompt: Reset].
(6) EXIT Prompt: Exit]. 14. RESET Reboot the device when the function stops working or if you cannot turn off the power of the device. To reboot the device, insert USB charging data cable while pressing and holding the MINUS (-) BUTTON. However, the pairing information, language setting, and saved FM radio channels will not Rebooting be deleted. Factory default reset To initialize all settings and set the device back to the factory default setting, while holding FUNCTION BUTTON, press MINUS (-) BUTTON for 8 seconds. A part from Language setting, all saved information of pairing, saved FM radio channels, and other set-ups will be deleted. 15. SMART-PHONE APPLICATION CONTROL In order to use ChatterBox Smart-phone application, pair BiT-4 with your smart-phone by Bluetooth. Download and run the ChatterBox smart-phone application. All the functional options can be controls in your Smart-phone. The ChatterBox Smart-phone application can be downloaded in App Store or Google player. 16. SOFTWARE UPGRADE Download the new version of the software available from the ChatterBox website
(www.chatterboxglobal.com). Please use the USB charging data cable supplied by ChatterBox. USB charging only cable can not be used for DATA connection. The method how to install the software is given at the homepage. 17. SUPPORT Precaution Although BiT-4 is Water Resistance, please keep the product away from heavy rain and water. Exposing the product to heavy rain or water for a long time may result in damage to the product. Store or use the product at temperatures of -15C ~ +50C. Too high and too low temperatures may damage, shorten capacity and life of the battery, or may cause the product to be inoperative. Keep the product out of direct sunlight. Exposing the product to direct sunlight may damage the electrical circuit and battery. It is particularly dangerous to expose the product to direct sunlight in a closed vehicle in summer. Do not apply any physical impact to the device. It may cause circuit and battery problem. Do not disassemble the device. It may cause a serious functional disorder and disassembled device will not be able to have the warranty service. Poor handling, physical impact, electrical shock, dropping or rough handling may cause a functional failure and result in a serious damage to the product. Do not use chemical cleansers such as Benzol, Acetone and do not apply any type of strong chemicals to clean the product. Keep the product away from the reach of children.. Keep the product away from heating appliances such as stove, gas-stove, microwave etc. It may Do not try to operate the product while operating a vehicle. This behavior may lead to a very If the device seems to be damaged or malfunctioning, stop using immediately and contact the explode. dangerous accident. service center. Prolonged exposure to a loud sound may damage your eardrums and cause hearing problem. Failure to comply with the precautions above will lead to product damage and/or malfunction. Please read the instructions before using the product. Designs, features, and functions are subject to change for improvement. Please ensure to keep the device in fully charged during period of non-use. Limited Warranty Our limited warranty can cover only 24months for the main device and 12 months for the battery and accessories. The warranty period starts at the time of the original purchase by the first end-user. The provisions of this warranty shall not apply to any device which has been subject to misuse, neglect, incorrect installation, unauthorized modification, accident, or has been repaired or altered outside of our factory. In case of returning via courier, the end-user must be able to return the defective product with its original package along with a copy of the original purchase receipt from the store where the purchase was made. The warranty service will be provided through the store where the first purchase was made. If you have difficulty contacting the store, please contact us at the provided contact The express warranty contained herein is in lieu of all other warranties, expressed, implied or statutory, including without limitation any warranty of merchantability of fitness for a information in this manual. particular use. In no event will ChatterBox be liable to the buyer for any damages, including special, incidental, indirect or consequential. Limitation of Liability To the full extent allowed by law Chatterbox excludes itself and its suppliers from any liability, whether based on contract or tort (Including negligence) for incidental, consequential, indirect, special, or punitive damages of any kind, or for loss of revenue or profits, loss of business, loss of information or data or their financial loss arising out of, in connection with the sale, installation, maintenance, use, performance, failure, or interruption of its products, even if ChatterBox or its authorized reseller has been advised of the possibility of such damages, and limits its liability to repair replacement, or refund of the purchase price paid at Chatterboxs option. This disclaimer of liability for damages will not be affected if any remedy provided herein shall fail of its essential purpose. In any case the total compensation liabilities of ChatterBox or its sales agents shall not exceed the price paid for the product by the purchaser. Reasons for Limited Liabilities If you do not return the product after claiming, you relinquish all rights to liabilities, loss, claims, and claims for reimbursement of expense (including attorneys fees). Therefore, Chatterbox will not be liable for physical injury, death, or any loss or damage of transportation means, possessions, or assets which belong to you or third parties that may have occurred while you use the product. Further, ChatterBox will not be liable for any substantial damage not related to the condition, environment, or malfunction of the product. All risks related with the operation of the product depend entirely on the user regardless of its use by the initial purchaser of a third party. Use of this product may violate local or national laws. In addition, be aware once again that correct and safe use of the product is entirely your responsibility. Liabilities disclaimer In addition to damages which may occur due to the use of the product, Chatterbox will not be liable for damages of the product which occur due to the following events. In the event the product is misused or used for purposes other than its intended purpose. In the event the product is damaged because the user does not follow the content of the product manual. other accident. In the event the product is damaged because it has been left unattended or has undergone any In the event the product is damaged because the user has used any parts or software which are not provided by the manufacturer. In the event the product is damaged because the user has disassembled, repaired, or modified it in such way as is not explained in the product manual. In the event the product damaged by a third party. In the event the product is damaged due to Acts of God (including fire, flood, earthquake, storm, hurricane or other natural disaster.) In the event the surface of the product is damaged by use. MOTORCYCLE LAWS Some provinces or countries may prohibit the use of two earpieces or two-piece headsets while operating a vehicle. Please check and follow all applicable national laws and regulations regarding the use of electronics, earpieces and headsets before operating your vehicle. 18. FAQ (Frequently Asked Questions) Q: When I use Intercom, I frequently experience noise and disconnections. A: Bluetooth Intercom uses 2.4GHz ISM band. This ISM band is being used for many applications, such as Wi-Fi, wireless CCTV, garage door remote control, traffic control signal etc. Therefore, in the city area, there are many ISM band frequencies being used and these cause interferences. If the other ISM band equipment is closer than your intercom partner, there would be noise and disconnections. High voltage power line can also cause the same phenomenon. This phenomenon is inevitable with Bluetooth products. Q: When I use Intercom, I feel more noise and disconnection toward a certain direction. A: Bluetooth ISM band is also a part of radio frequency. Radio frequency has very similar character to the light. Radio frequency cannot go through water, soil, rock, metal plate and human body. The human body consists of 70% water. Therefore, Bluetooth communication cannot be connected well through body. This phenomenon can happen when you have your Smart-phone in your back pocket. Q: Battery life became shorter. A: For Life cycle of Lithium Ion, Lithium Polymer battery, manufacturer guarantees only 300 times of full charges and discharges. 300 times of life cycle means, if you use the full capacity of the battery every day, you can use it only for about one year. If you use half of the battery capacity every day, you can use it for about two years. If your battery capacity went down too low and you cannot use it for enough time in your normal usage, please contact our service center to have a battery replacement service. Q: I cannot use intercom with a range of 700m as described in the specification. A: As described in the answer above, the 2.4GHz ISM band frequency gets much interference by other ISM band applications in the city area. Interference cause noise, disconnection and shortened range. This is inevitable since the 2.4GHz ISM band is free of charge and has no obligation of registration. That is why ISM bands are so popular. However, at the seaside, without any other ISM band interference and no obstacles between two riders, you can have even better range than 400 meters. For more detailed FAQ information, please access our website. (http://www.chatterboxglobal.com/) 19. CE/FCC Declaration Vereinfachte CE-Konformittserklrung. Hiermit erklrt UNIMO TECHNOLOGY dass der Funkanlagentyp BIT-4 der Richtlinie 2014/53/EU entspricht. Der vollstndige Text der EU-Konformittserklrung ist unter der folgenden Internetadresse support/library verfgbar:
http://www.chatterboxglobal.com/us/board/list.php?bdId=morgueEU Bitte beachten Sie, dass dieses Produkt Radiofrequenzbnder benutzt, die innerhalb der EU nicht harmonisiert sind. Innerhalb der EU darf dieses Gert in sterreich, Belgien, Dnemark, Finnland, Frankreich, Deutschland, Griechenland, Irland, Italien, Luxemburg, den Niederlanden, Portugal, Spanien, Schweden, im Vereinigten Knigreich und innerhalb der EFTA in Island, Norwegen und der Schweiz benutzt werden. CE Declaration of Conformity This product is CE marked according to the provisions of Directive/53/EU. Hereby, ChatterBox declares that product BIT-4 is in compliance with the essential requirements and other relevant provisions of Directive/53/EU. For further information, please refer on our website/support/library:
http://www.chatterboxglobal.com/us/board/list.php?bdId=morgueEU Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. CE Declaration of conformity Questo un prodotto a marchio CE in quanto rispetta le disposizioni della Direttiva 2014/53/EU. ChatterBox dichiara che il prodotto BIT-4 stato fatto in conformitai requisiti essenziali ed alle disposizioni pirilavanti della Direttiva 2014/53/EU. Per maggiori informazioni prego visitare il sito internet/support/librairy:
http://www.chatterboxglobal.com/us/board/list.php?bdId=morgueEU Attenzione, questo prodotto usa frequenze radio non armonizzate in Europa. Il prodotto puessere usato nei seguenti Paesi: Austria, Belgio, Danimarca, Finlandia, Francia, Germania, Grecia, Irlanda, Italia, Lussemburgo, Olanda, Portogallo, Svezia, Regno Unito e nei membri EFTA IN Islanda, Norvegia e Svizzera. Declaracin de conformidad CE Este producto dispone del marcado CE segn las disposiciones de la Directiva sobre equipos radioelctricos y equipos terminales de telecomunicacin 2014/53/EU. Por la presente, CHATTERBOX declara que este producto BIT-4 cumple con los requisitos esenciales y otras provisiones relevantes de dicha Directiva 2014/53/EU. Para obtener ms informacin, consulte website/support/library :
http://www.chatterboxglobal.com/us/board/list.php?bdId=morgueEU Tenga en cuenta que este producto utiliza bandas de radiofrecuencia no armonizadas dentro de la Unin Europea (UE). Dentro de la UE, este producto estpensado para su uso en Alemania, Austria, Blgica, Dinamarca, Finlandia, Francia, Espaa, Grecia, Irlanda, Italia, Luxemburgo, Pases Bajos, Portugal, Reino Unido y Suecia y, dentro de la AELC, en Islandia, Noruega y Suiza. Dclaration de conformitCE Ce produit porte un marquage CE, conformment aux dispositions de la directive 2014/53/EU. CHATTERBOX dclare par la prsente que le produit BIT-4 est conforme aux exigences principales et autres dispositions correspondantes de la directive 2014/53/EU. Pour plus dinformations, veuillez consulter notre site internet/support/library :
http://www.chatterboxglobal.com/us/board/list.php?bdId=morgueEU Veuillez noter que ce produit utilise des bandes de radio frquence non uniformises au sein de lUnion Europenne. Au sein de lUnion Europenne, ce produit est destintre utilisen Autriche, Belgique, Danemark, Finlande, France, Allemagne, Grce, Irlande, Italie, Luxembourg, Pays-Bas, Portugal, Espagne, Sude et Royaume-Uni et au sein de lAELE, en Islande, Norvge et Suisse. FCC Declaration of Conformity NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Technical Information BiT-4 DIMENSIONS 76 x 44 x 21 mm TALKING HOURS WEIGHT 66g (cradle included) STANDBY HOURS BLUETOOTH VERSION V4.1 CHARGING HOURS BATTERY CAPACITY 3.7V 900mAH AUDIO POWER 12 hours 264 hours 2 Hours and half 250mW x 2 OPERATING TEMPERATURES
-15 ~ +50 RF POWER Class 1, Class 2 CUSTOMER SERVICE CENTRE Customer service center in USA Address: 11627 Telegraph Rd. Suite #103 Santa Fe Springs, CAUSA Website: www.chatterboxusa.com Customer service center in EUROPE Address: Talstrasse 39 D-77887-SASBACHWALDEN, GERMANY 20. SIMPLE MANUAL MODE FUNCTION OPERATION Power on Power off Long press the POWER BUTTON for 3 seconds Long press the POWER BUTTON for 3 seconds Volume control Short press the PLUS or MINUS BUTTON Surround monitoring Long press the CRADLE BUTTON for 2 seconds Set up mode Long press the PLUS and MINUS BUTTON for 3 After stopping Music or FM radio, Simultaneously Change language Select at the SET UP Mode GENERAL Change VOX level Select at the SET UP Mode seconds Factory reset Reboot Simultaneously press the PLUS and MINUS BUTTON for 8 seconds in Setting Mode While pressing and holding the MINUS BUTTON, insert USB charging data cable While simultaneously pressing the POWER and Software download PLUS BUTTONs, insert USB charging data cable until the LED turns off (on power off state) Check Battery power level Simultaneously Short press the PLUS and MINUS BUTTON Answer call Short press the FUNCTION BUTTON Hang up / Reject call Long press the FUNCTION BUTTON Redial the last number MINUS BUTTON / To call last number, press the After stopping Music or FM radio, long press the PHONE Dial saved number pressing the PLUS or MINUS BUTTON and then, FUNCTION BUTTON After stopping Music or FM radio, long press the MINUS BUTTON / Search a saved number by call the selected number by pressing the FUNCTION BUTTON Voice Command
(Smart-phones Siri function) While being on the phone, switching device between BiT-4 and Smart-phone After stopping Music or FM radio, press the PLUS BUTTON longer than 1 second While being on the phone, simultaneously press the PLUS and MINUS BUTTONs for 1.5 seconds After pressing the POWER BUTTON for 8 seconds, Smart-phone pairing search for BiT-4 in the Bluetooth function of the Music Sharing Pairing Select at the SET UP Mode Smart-phone 1:1 Intercom pairing PAIRING After pressing the INTERCOM BUTTON for 3 seconds, short press the INTERCOM BUTTON After pressing the INTERCOM BUTTON for 3 Universal Intercom pairing seconds, short double-press the INTERCOM BUTTON BUTTON radio mode After pressing the INTERCOM BUTTON for 3 seconds, short double-press the INTERCOM Short double-press the FUNCTION BUTTON at FM Short press the FUNCTION BUTTON Double-Short press the PLUS or MINUS BUTTON 4 Riders Multi-Intercom Pairing Entering Music Mode MUSIC Switching music play Stop / Play Fast forward /
Rewind Music Smart-phones between two paired Long press the FUNCTION BUTTON Music Sharing connection Simultaneously the PLUS and MINUS BUTTON for
/disconnection 1 second Entering FM radio mode MUSIC mode Short double-press the FUNCION BUTTON at Searching channel Short double-press the PLUS or MINUS BUTTON FM RADIO Play / FM radio mute Short press the FUNCTION BUTTON Saving channel second Press the FUNCTION BUTTON longer than 1 Change saved channel Long press the PLUS or MINUS BUTTON INTERCOM 1:1 Intercom connection/
Short press the POWER BUTTON /
disconnection Short press the POWER BUTTON Universal Intercom Short double-press the POWER BUTTON /
connection /disconnection Short double-press the POWER BUTTON Multi-Intercom connection Short press the INTERCOM BUTTON or
/ disconnection Short double-press the INTERCOM BUTTON Intercom volume control Long press the PLUS or MINUS BUTTON Short press the CRADLE BUTTON Verify the given number of your device Verify the given number of connected with yours the other device which is Short double-press the CRADLE BUTTON
1 | Agent Authorization | Cover Letter(s) | 113.30 KiB | August 31 2020 |
Unimo Technology Co.,Ltd. Agent Authorization Company: Unimo Technology Co.,Ltd. Address: 4th Floor, 162 Bangbae-Ro Seocho-Gu, Seoul,Korea, 137820 South Korea Product Name: Bluetooth Helmet Headset Model Number(s): BiT-4 Product Description: Bluetooth Helmet Headset We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:
Name:
YO-JIN PARK Company: Unimo Technology Co.,Ltd. Date: 2020-07-29
1 | FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 264.22 KiB | August 31 2020 |
Unimo Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-07-29 Subject; Request for Confidentiality FCC ID: O25BIT-4 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);
OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Unimo Technology Co., Ltd. Unimo Technology Co.,Ltd. Contact person: YO-JIN PARK
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-08-31 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2020-08-31
|
||||
1 | Applicant's complete, legal business name |
Unimo Technology Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0023812126
|
||||
1 | Physical Address |
4th Floor, 162 Bangbae-Ro Seocho-Gu
|
||||
1 |
Seoul,Korea, N/A
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
O25
|
||||
1 | Equipment Product Code |
BIT-4
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
Y****** P********
|
||||
1 | Title |
General Manager Research Engineer
|
||||
1 | Telephone Number |
82-2-********
|
||||
1 | Fax Number |
82-2-********
|
||||
1 |
G******@unimo.co.kr
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Unimo Technology Co., Ltd.
|
||||
1 | Physical Address |
South Korea
|
||||
1 |
G******@unimo.co.kr
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth Helmet Headset | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 mm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn and simultaneous SAR accessory are 0.23 W/kg,0.12W/kg and 0.44 W/kg respectively. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Attestation of Global Compliance (Shenzhen) Co., L
|
||||
1 | Name |
D******** L******
|
||||
1 | Telephone Number |
+86-7********
|
||||
1 |
d******@agc-cert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | MO | 2402.00000000 | 2480.00000000 | 0.0171000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC