FCC ID: XX2-UBIO-XIRIS Access controller

 

UBio-X Iris.User Guide Version Eng-1.00 Copyright 2000 By UNIONCOMMUNITY Co., LTD. UBio-X Iris User Guide 2

<Revison History>

Version Date Description 1.00 2020-06-09 Initial Release Firmware Version 0.0.1-61.00.000.01 UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 3

<Glossary>

Admin, Administrator

- A user who can enter into the terminal menu mode, he/she can register/modify/delete terminal users and change the operating environment by changing settings.

- If there is no administrator for a terminal, anyone can change the settings. In this regard, it is recommended to register at least one administrator.

- Caution is required with registration and operation because an administrator has the right to change critical environmental settings of the terminal. 1 to 1 Verification card

- It is the method to authenticate the fingerprint (or iris) after entering the users ID or

- It is called as 1 to 1 Verification since only the fingerprint (or iris) registered in the users ID or card is used for comparison. 1 to N Identification

- It is the method to find the user only with the fingerprint (or iris).

- It is called as 1 to N identification since it finds the same fingerprint (or iris) as the input fingerprint (or iris) among registered fingerprints (or irises) without entering a user ID or card. Authentication level

- Depending on the fingerprint match rate, it is displayed from 1 to 9. Authentication is successful only if the matching rate is higher than the set level.

- The higher the authentication level is, the higher the security is. However, it requires a relatively high match rate, so the authentication is vulnerable to failure.

- 1:1 Level: Authentication level used for 1:1 verification

- 1:N Level: Authentication level used for 1:N identification Authentication Method LFD (Live Finger Detection)

- It represents the various types of authentication, including the iris authentication, FP authentication, RF (Card) authentication, password authentication or a combination of these methods. Example) Iris or FP: It authenticates with the iris or fingerprint.

- This function allows the input of only real fingerprints and blocks the input of imitation fingerprints produced using rubber, paper, film, and silicone. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 4 Table of Contents

<Revison History> .................................................................................................... 2

<Glossary> ................................................................................................................ 3 Table of Contents .................................................................................................... 4 1. Before use ............................................................................................................. 6 1.1. Safety Precautions ................................................................................................. 6 1.2. Specific names of the terminal .............................................................................. 7 1.3. Windows after operation ....................................................................................... 8 1.3.1. Icons ............................................................................................................... 8 1.3.2. Message ......................................................................................................... 9 1.4. Voice sounds in operation ................................................................................... 12 1.5. Beep sound in operation ..................................................................................... 12 1.6. How to register and authenticate the iris properly ............................................ 12 1.7. Proper fingerprint registration and input methods ............................................ 13 2. Product introduction .......................................................................................... 15 2.1. Product characteristics ....................................................................................... 15 2.2. Product components ........................................................................................... 18 2.2.1. Standalone use (Access) .............................................................................. 18 2.2.2. Connected with Server (Access, Time & Attendance, Meal management) .... 18 2.3. Product specification ........................................................................................... 19 3. Environment setting ........................................................................................... 20 3.1. Checks before setting the environment ............................................................. 20 3.1.1. Entering the menu ........................................................................................ 20 3.1.2. Administrator authentication .......................................................................... 20 3.1.3. How to enter the menu without administrator authentication ......................... 21 3.1.4. How to save the set values ........................................................................... 22 3.2. Menu composition ............................................................................................... 23 3.3. User Management ................................................................................................ 26 3.3.1. Add ............................................................................................................... 26 3.3.1.1. Photo registration .................................................................................. 28 3.3.1.2. Name registration .................................................................................. 28 3.3.1.3. Fingerprint registration .......................................................................... 28 3.3.1.4. Iris registration ....................................................................................... 30 3.3.1.5. Password registration ............................................................................ 32 3.3.1.6. Card registration .................................................................................... 32 3.3.1.7. Authentication option ............................................................................. 33 3.3.1.8. Auth type ............................................................................................... 34 3.3.1.9. Save ...................................................................................................... 34 3.3.2. Delete ........................................................................................................... 36 3.3.3. Modify ........................................................................................................... 37 3.3.4. Delete All ...................................................................................................... 38 3.3.5. View.............................................................................................................. 38 3.4. Network setting .................................................................................................... 39 3.5. Application mode ................................................................................................. 41 3.5.1. Application .................................................................................................... 41 3.5.1.1. Access or TnA setting ............................................................................ 41 3.5.1.2. Meal setting ........................................................................................... 42 3.5.2. Function key ................................................................................................. 42 3.6. System .................................................................................................................. 43 UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 5 3.6.1. System ......................................................................................................... 43 3.6.2. Finger ........................................................................................................... 45 3.6.3. Iris ................................................................................................................ 47 3.6.4. Auth .............................................................................................................. 47 3.6.5. Date/Time ..................................................................................................... 48 3.6.6. Database ...................................................................................................... 49 3.6.6.1. Delete all the users ................................................................................ 49 3.6.6.2. Delete setting ........................................................................................ 50 3.6.6.3. Delete Log ............................................................................................. 51 3.6.6.4. Delete Image log ................................................................................... 51 3.6.6.5. Factory init ............................................................................................ 52 3.7. Terminal ................................................................................................................ 53 3.7.1. Sound ........................................................................................................... 53 3.7.2. Option ........................................................................................................... 54 3.7.3. Input ............................................................................................................. 55 3.7.4. Lock .............................................................................................................. 56 3.7.5. External Device ............................................................................................ 57 3.8. Display .................................................................................................................. 59 3.8.1. Theme .......................................................................................................... 59 3.8.2. Camera ......................................................................................................... 59 3.8.3. Language ..................................................................................................... 60 3.8.4. Option ........................................................................................................... 60 3.8.5. Message display time ................................................................................... 61 3.9. Terminal Info ......................................................................................................... 61 3.9.1. System ......................................................................................................... 61 3.9.2. Terminal ........................................................................................................ 62 3.9.3. Network ........................................................................................................ 62 3.9.4. User .............................................................................................................. 63 3.9.5. Log ............................................................................................................... 63 3.9.6. About ............................................................................................................ 64 3.10. USB ..................................................................................................................... 65 3.11. Download the user file ....................................................................................... 67 3.11.1. Change the voice message ......................................................................... 67 4. How to use the terminal ..................................................................................... 68 4.1. How to change Auth mode .................................................................................. 68 4.2. How to input the user ID ...................................................................................... 69 4.3. Authentication ...................................................................................................... 69 4.3.1. Iris authentication ......................................................................................... 69 4.3.2. Fingerprint authentication ............................................................................. 70 4.3.3. Card authentication....................................................................................... 70 4.3.4. Password authentication ............................................................................... 70 4.3.5. Multi authentication ....................................................................................... 70 UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 6

- If the above warning is ignored, it may result in death or serious injury. 1. Before use 1.1. Safety Precautions Warning Handling with wet hands or allowing liquid to flow into it is prohibited.

-> It may cause an electric shock or damage. Do not disassemble, repair, or modify the terminal at discretion.

-> It may cause an electric shock, fire or damage. Cautions Keep away sunlight

It deformation change. from direct may or cause color Avoid using water, benzene, for thinner, or alcohol cleaning

-> It may cause an electric shock or fire. Do not contaminate the fingerprint input area.

-> Fingerprints may not be well recognized. impacts or using objects the Avoid sharp terminal.

-> The terminal may be on damaged and broken. Do not place a fire source near the terminal.

-> It may cause a fire. Keep out of reach of children.

accident or damage. It may cause an Avoid high humidity or dust

-> The terminal may be damaged. Do not place a magnet close to the terminal.

-> The break malfunction. terminal may down or Avoid using insecticide or flammable spray near the terminal.

deformation change. result or in color It may Avoid severe temperature changes

-> The terminal may be broken.

- If the above cautions are ignored, it may result in property loss or human injury. Under no circumstances will UNIONCOMMUNITY be responsible for accidents or damages caused by inappropriate use of the product without referring to the user manual. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 7 1.2. Specific names of the terminal Touch LCD Illumination sensor USB memory input Microphone IR LED Dual camera Card sensing area Fingerprint sensor Distant sensor Speaker UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 8 1.3. Windows after operation Menu button ID input button the Select access mode. Status Icon 1.3.1. Icons

<Fig. 1>

Time/Date None

: There is no connected Wi-Fi dongle. Wi-Fi Status

: Wi-Fi connection is not activated

: Wi-Fi connection is activated

: When there is nothing in the proximity distance (90cm)

: When there is a person within the proximity distance

(90cm) None None

: Detect the high illumination status. (Light)

: Detect the low illumination status. (Dark)

: Fire Alarm is activated.

(on connecting to the fire detection sensor) None

: Normal status

: Tamper switch is activated. (Terminal is disassembled.)

: Door status is not sensed.

: Door is closed.

: Door is opened.

: Door is opened abnormally.

: LAN cable is not connected. Distance detection Illumination detection Fire Alarm Tamper Switch Door Status Network status

: Disconnected to the server even if LAN cable is connected.

: Connected to the server. (Online) UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 9 1.3.2. Message

- Basic Window

- When the authentication succeeds

- When the authentication is failed

- When an unregistered user ID is entered

- When an unregistered card is entered UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 10

- Passback error when using anti-passback function

- When using for meal management

- When a user tried the authentication more than twice in one meal time

- When the server does not respond during the authentication attempt to the server

- When the network is disconnected during the authentication attempt to the server

- Registration without authentication right or authentication attempt when the entrance is not permitted When the user is designated in the blacklist UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 11

- When the terminal is set as locked it When management is not the meal time in meal

- The waiting status for the input of user ID

- The waiting status for the input of password

- The waiting status for the input of fingerprint UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 12

- The waiting status for the input of card

- When the terminal program is being upgraded

(In this status, you should not turn off the terminal.) 1.4. Voice sounds in operation Operation type Voice sound Success to authorize You are authorized. Fail to authorize Please try again. 1.5. Beep sound in operation Pick Notice reading card fingerprint for the or When the card is read When the fingerprint is entered in the fingerprint window Pi-pick Notice for fail When the authentication is failed (at Voice off) Peek Notice Success for When the authentication is successful (at Voice off) 1.6. How to register and authenticate the iris properly How to register the iris

- Maintain the distance between the face and terminal about 45 cm.

(Locate the eyes in the guide line of the LCD window.)

- Open your face big according to the guidance and register it by staring at the front.) However, please keep the motion still during the registration shooting.

- Register the iris after sweeping up the hair so that it does not cover the eyes.

- Glasses wearers should register as much as possible without wearing glasses. How to authenticate with iris Stare at the message window in the center of the LCD screen. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 13 Notes installed.

- It is recommended to register and authorize at the location where the terminal is

- If you close your eyes or turn your eyes to the side, the iris recognition rate may decrease. It is recommended to locate the face at the front as far as possible

- The color lenses or sun glasses can decrease the recognition rate of iris. Cautions in the installation

- Be sure to install the terminal indoor.

- Do not install under the light bulb.

- Not recommended in the circumstance of backlight or direct light. 1.7. Proper fingerprint registration and input methods Correct fingerprint registration methods Place your index finger on the window just as you do with a finger stamp. Do not use the tip of the finger. Make sure the center of your finger touches the window.

(Please be cautious that you may result in low temperature burns when inserting finger.) Use your index finger if possible, which is the easiest for orientation and guarantees a stable input method. Using the thumb or baby finger can be awkward and may result in a bad image. Check if your fingerprint is unclear or damaged. It is tricky to recognize fingerprints on dry, wet, unclear, or injured fingers. Use another finger in this case. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 14 Be aware of certain fingerprint conditions Depending on the users fingerprint condition, some fingerprints may not be used or may cause an inconvenience. If the fingerprint is damaged or very unclear, it cannot be recognized. Please use a password instead in this case. When a finger is dry, breathe on the finger for smooth operation. For kids, it may be tricky or impossible to use the terminal since their fingerprints are too small or very unclear. It is recommended to register their fingerprints every six months. For the elderly, it may not be possible to register their fingerprints if there are too many fine lines on the fingerprints. It is recommended that you register more than 2 fingerprints. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 15 2. Product introduction 2.1. Product characteristics Multi-Modal product which the user can use both iris and fingerprint authentication functions together. FHD (5M) Display resolution is applied. The illumination sensor and dual camera (Color & IR) are applied to enable the iris recognition even in the dark place. RF(125kHz) and Smart Card(13.56MHz) can be used at the same time. Easy authentication with the iris or fingerprint

- Can prevent the hazard factors such as forgetting password, losing the card or key, or stealing with the biometrics such as iris and fingerprint recognition and increasing the security by using the persons own bionic information. The access control system using the LAN

- Easy expansion directly applying to the existing network since it communicates with terminal and using TCP/IP protocol between authentication server. High speed with 10/100 Mbps Auto Detect can make it easy to manage and monitor via network. fingerprint recognition the Various registration and authentication methods Iris Fingerprint Card Password Iris registration Iris authentication Fingerprint registration Fingerprint authentication Card registration Card authentication Password registration Password authentication Card or Fingerprint Card, fingerprint registration Card or fingerprint authentication Fingerprint authentication after ID input Card & Fingerprint Card, fingerprint registration Fingerprint authentication after card authentication ID input > Card authentication > Fingerprint authentication Card or Password Card, or password authentication Card authentication Password authentication after ID input UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 16 Card

& Password Fingerprint or Password Fingerprint

& Password Card or Iris Card & Iris Iris or Password Iris & Password Fingerprint or Iris Fingerprint

& Iris Card or Fingerprint or Iris Card

& Fingerprint

& Password Card

& Iris

& Password Card, password registration Password authentication after card authentication ID input > Card authentication > Password authentication Fingerprint, password registration Fingerprint authentication Fingerprint authentication after ID input, if failed, Password authentication is possible. Fingerprint, password registration Password authentication after fingerprint authentication ID input > Fingerprint authentication > Password authentication Card, iris registration Card or iris authentication Iris authentication after ID input Card, iris registration Iris authentication after card authentication ID input > Card authentication > Iris authentication Iris, password registration Iris authentication ID input> Iris authentication > if failed, Password authentication Iris, password registration Password authentication after iris authentication ID input > Iris authentication > Password authentication Fingerprint, iris registration Fingerprint or iris authentication ID authentication input > Fingerprint authentication >

if failed, Iris Fingerprint, iris registration Iris authentication after fingerprint authentication ID input > Fingerprint authentication > Iris authentication Card, fingerprint, iris registration Card or fingerprint or iris authentication ID authentication input > Fingerprint authentication >

if failed, Iris and Card, fingerprint, and password registration Fingerprint authentication ID input > Card authentication > Fingerprint or Password authentication authentication password after card Card, iris, and password registration Iris and password authentication after card authentication ID authentication input > Card authentication >

Iris and Password UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 17 Card

& Fingerprint

& Iris Fingerprint

& Iris

& Password Card, fingerprint, iris registration Fingerprint and iris authentication after card authentication ID authentication input > Card authentication > Fingerprint and Iris Fingerprint, iris, password registration Iris and password authentication after fingerprint authentication ID input > Fingerprint authentication > Iris and Password authentication UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 18 2.2. Product components 2.2.1. Standalone use (Access) 2.2.2. Connected with Server (Access, Time & Attendance, Meal management) TCP/IP Internet /

WAN / LAN DC15V Adapter Electric lock

(Lock+, Lock-, Monitor) TCP/IP TCP/IP TCP/IP TCP/IP TCP/IP UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr authentication Fingerprint server (static IP) UDB server database (MDB or MSSQL) Remote program

(user and terminal setting management) Meal program in cafeteria management management Attendance management program UBio-X Iris User Guide 19 2.3. Product specification SPEC REMARK Types CPU LCD MEMORY External SD Card Support Camera Capacity 1GHz Quad Core CPU 5.0 inch Touch LCD(480*800) 16G Bytes Flash 2GBytes RAM Backup data / FW upgrade Dual Camera (Color & IR) 200,000 User / 200,000 Card 200,000 Finger (1:N1:50,000) 400,000 Iris (1:N1:40,000) 10,000,000 Log / 20,000 Image Log Fingerprint sensor Optical Scan Area / Resolution 20 * 20mm / 500 DPI Temperature /

Humidity

-20 ~ 60 /

Lower than 90% RH AC / DC Adapter INPUT : Universal AC100 ~ 250V OUTPUT : DC 12V

(Option : DC 24V) UL, CSA, CE Approved Lock Control EM, Strike, Motor Lock, Auto Door I/O 4 In (1 Exit, 3 Monitor) 2 Out (a combined use of Lock Control) Communication Port TCP/IP (10/100Mbps) RS-232 RS-485 Wiegand In/Out Authentication server communication Meal ticket printer Controller communication Card reader or Controller communication Optional Card Reader 125KHz RF / 13.56MHz Smart simultaneous use

(1 Sam socket) HID 125K Prox card (Option) HID iClass Card (Option) Dimension(W*H*D) 160.6mm * 214.1mm * 45.7mm UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 20 3. Environment setting 3.1. Checks before setting the environment 3.1.1. Entering the menu If you click [

follows.

] icon at the basic window, you can see the main menu window as You can enter the subdivision menu by clicking each button. 3.1.2. Administrator authentication If the administrator is registered, the following administrator authentication window appears at first. the admin ID, Administrator authentication the If you enter administrator authentication is tried along with the authentication method of the admin such as the card, fingerprint, iris, or password. The admin authentication only appears when registered administrator. The authentication is tried only once when entering the menu mode and you can access to all the menu until you go out from the main menu. there is a UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 21 3.1.3. How to enter the menu without administrator authentication It is how to enter the menu when the fingerprint or iris authentication is impossible since the administrator card registered in the terminal was lost or there is no administrator. Open the cover by removing the bracket at the backside of the terminal. With the opened cover, connect the 5 pin connector number 2 with 4, and 3 with 5 at the bottom of the backside of the terminal.

<Fig. 3-3>

at the basic window to enter the administrator authentication Select the icon window in <Fig. 3.1.2>, and fill the admin ID as 0000 (User ID length) and click

] button, then you can enter the menu window. Be sure to remove the connection pin of the connector after modifying the setting

value. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 22 3.1.4. How to save the set values If you click the [Complete] button at each menu to save the changed value after the change of settings, the set value of the window is saved and the following message box appears. If there is no changed value, the window is moved to the previous menu. If there is no signal for 30 seconds while changing the set value in the menu, the window is moved to the previous menu. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 23 3.2. Menu composition 1.User 2. Network IP address Static IP / DHCP Terminal ID Terminal ID 3. System 1. System 1. Add 2. Modify 3. Delete 4. Delete All 5. View DNS Server IP 2. Finger 3. Iris 4. Auth 5. Date/Time IP address Subnet Mask Gateway DNS server 1 DNS server 2 Server IP Port User ID Length [2~9]

Authentication: Terminal Only Mandatory Registration Iris Fingerprint Card Password Name Number of fingers [1~10]

1:N Level [3~9]

1:1 Level [1~9]

Fake Finger Detection FP template format Check similar FP Multi FP Enable 1:N Matching Level [1~5]

Detection Level [0~50]

Auth type Iris 1:1 Only Time synchronization Display Format Set Date Set Time UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 24 6. Database 1. Delete all users 2. Delete setting 3. Delete Log 4. Delete Image log 5. Factory init 4. Application 1. Application Access / TnA / Meal 1. When setting Access or TnA Schedule F1 (Attend) F2 (Leave) F3 (Out) F4 (In) Access Blocking Time (0~86400) 2. When setting Meal Schedule Breakfast Lunch Dinner Supper Snack Allow duplicate Enable F1 Enable F2 Enable F3 Enable F4 ID input Voice Volume Beep Volume Sound Option Read Card number Card format Lock terminal Card reader M0 M1 M2 IO Warn door open (sec) Tamper alarm Lock 1 Option Lock 2 Option Lock 1 duration (ms) Lock 2 duration (ms) 2. Function key 5. Terminal 1. Sound 2. Option 3. Input 4. Lock UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 25 5. External Device 6. Display 1. Theme Background 2. Camera 3. Language Language 4. Option Screen saver Display Option 5. Message display time Message Display Time (ms) 7. Info 1. System 2. Terminal 3. Network 4. User 5. Log 6. About 1. Export 2. Import 3. Others 8. USB RS232 RS485 Wiegand Site Code Wiegand Output Wiegand Input Display Option Save Option Save success log Save failed log System Info Disk Ram Terminal Info Terminal ID Application Language Network Info MAC

<Ethernet>

IP User Log About 1. User Data 2. Event Log 3. Export All 4. Picture 5. System Option 1. User Data 2. System Option 1. F/W Upgrade 2. Theme UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 26 3.3. User Management When you select the [User] at the main menu, the following window appears. 3.3.1. Add If you select [User] -> [Add] in the main menu, the following screen appears. The number of all the users is shown at the top of screen including administrator. Click [Add] button to add the new user, [Modify]

button to modify the user, [Delete] button to delete the specific user, [Delete All] button to delete all the users, and [View] button to inquire the registered user list. Input the user ID to register and click

[OK] button. In this case, the ID which can be the screen registered automatically, register conveniently. If you want to change ID, delete the previous value by clicking is shown on so you can

] button and input the new value.

Click [BACK] button to cancel and go back. If you enter ID which is already registered, the failure message appears, and if the ID is not registered, the following screen appears. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 27 The icons in the left side mean as follows:

: The number of registered irises

: The number of registered fingerprints

(X,1~10)

: Existence of password registration

(X: none, O: registered)

: The number of registered cards

(X,1~10)

: The user ID to register

: User

: Administrator

: Take a picture of a user and register it. You can register the name with [Name], unique ID with [Unique ID], fingerprint with [Fingerprint], duress finger with [Duress FP], iris with [Iris], card with [Card], and password with [Password] button. The registration is basically set to be user, and it can be changed to administrator if you click [Admin] button. Click [Save] button to save the registration, and click [Cancel] or [BACK] button to cancel the registration and return. Only user who is registered as administrator can change the operating method of the terminal and can register/modify/delete the information of all the saved users, so be careful to register the administrator. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 28 3.3.1.1. Photo registration 3.3.1.2. Name registration 3.3.1.3. Fingerprint registration

] button at the Register by clicking [

[Add User] screen. Click [Save] button to register with the present camera image. Click [Cancel] or [BACK] button to cancel the registration and return. Register by clicking [Name] button in the

[Add User] screen. After entering name with the keyboard at the bottom, click [OK] button. Click the [

registration and return.

] button to cancel the Register by clicking [Fingerprint]

] button to cancel the registration button at the [Add User] screen. Click [

and return. Select the finger to be registered when the left screen appears. If you register the multiple fingers, the fingers already registered are represented by blue

) and the duress fingerprints are represented by violet circle (

). If you select circle (

the finger already registered, the following message appears, and if you select the re-

registration, you can register again with deleting previously registered fingerprint. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 29 When you authenticate with duress FP, the alarm message can be transferred to the server and you can output the dry contact signal if you set the duress FP alarm from the setting of lock from the terminal menu. (Refer to 3.7.4. Lock). the Enter the fingerprint with referring 1.7 Proper fingerprint registration and input methods. Enter the fingerprint twice according screen to instruction as follows. When the light is turned on at the fingerprint sensor with the message Register FP, put your finger on the input screen and wait for 2~3 seconds until the light is turned off. When the message Enter the same fingerprint again appears, enter the same fingerprint again. In the second fingerprint input after the first fingerprint, you should take your finger off the sensor once and place it again. The message of the left side appears when the input is completed. If you click [OK] button, the registration is completed and the screen is returned to the previous menu. If you want to register again, you can click [Retry] button and then go through the registration process from

. But registration, you can click [

if you want to cancel the

] button. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 30 registered, If it is similar with the fingerprint already the message Already registered finger! appears like the left side, and you can start again from the procedure of if you click the [Retry] button. You can click [

and return to the previous menu.

] button to cancel You can register 10 fingerprints at most for one ID, and you cannot register more than 10 IDs. If the registration is failed 2~3 times despite the proper fingerprint registration method, it is recommended to use iris, password, or card. The similar fingerprint check on registration should be verified for the registered fingerprints on the terminal side only. If the same fingerprint is registered from each terminal and UNIS with the different User ID, the server doesnt check the similarity for the retrieved fingerprint from the terminal. In this case, the same fingerprint can be authenticated with the different user ID, so you have to watch out this. 3.3.1.4. Iris registration Register with referring to 1.6 How to register and authenticate the iris properly. Select [Start] button to register the iris. After aligning the iris with the iris outline as shown in the left screen, follow the guide message displayed on the screen and look at the front. If the iris is recognized normally as shown in the left screen, the green bars on both sides will rise and the iris will be registered. At this time, do not blink the eyes and stop as they are so that the registration can be done well. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 31 When the registration is completed, Completed message is shown on the screen. If you click [OK] button, the iris registration is completed and the screen is moved to the previous screen. If you want to register again, click [Start]

button to start from the procedure of

. The feature to check the iris similarity is performed when iris is registered, and the function is made only among users who have iris included in the user's authentication combination and 1:N iris authentication is enabled in the authentication option. For this reason, users not included in the conditions may not be detected in this feature. (The same is applied for fingerprint registration.) UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 32 3.3.1.5. Password registration 3.3.1.6. Card registration If you enter the password in 1~8 digits in the password input window and click [OK]

button, the input focus is moved to the password confirmation window at below. Enter the same password again and click

[OK] button. Click [

If you enter the different password in the confirm window, the message Wrong input! appears as follows.

] button to cancel and return. Register with clicking [Card] button in the

[Add User] button. Click [

cancel and return. If you enter the card already registered,

] button to the following message appears. If a user tried over than 10 registrations, the following message appears. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 33 3.3.1.7. Authentication option FP Level (Basic setting: 0) It decides the fingerprint authentication level of each user, and the registered users can have different authentication level by modifying this value. If you set 0, the authentication uses the level of fingerprint authentication. For example, if you select the 1 for FP Level, this user will be applied with 1 on 1:1 FP Level. But if you select 0 for this level, the user will be applied with the 1:1 FP Level set from [System] -> [Finger]. Enable FP 1:N (Basic setting: If the fingerprint is registered, [v]) If this option is checked, you can authorize only with fingerprint without user ID or card Enable Iris 1:N (Basic setting: If the iris is registered, [v]). If this option is checked, you can authorize only with iris without user ID or card. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 34 3.3.1.8. Auth type Set by clicking [Auth type] at the [Add User] window. (But, it can be set when there are more than 2 authentication methods registered) Click [BACK] button to cancel and return. This shows all the authentication methods already registered, and the buttons at the lower side shows the buttons [OR] /

[AND] which can be selected. The selected authentication method is displayed by blue and the registered or non-used authentication method does by gray. If you click the authentication method is changed and the screen moves to the previous window. The authentication method represented as follows. the [OK] button, icons are

: Fingerprint

: Iris

: Card

: Password In case of authentication method, if it is not set, the authentication methods are set as [OR] combination automatically with the current registered authentication methods.

(However, 3 of authentication methods can be selected and 2 of OR combination with password can be limited for maximum.) 3.3.1.9. Save Click the [Save] button to save when all the registration procedure is finished. At this point, if you click [Cancel] or [BACK] button to return, the user is not saved. Next is the LCD messages which can appear at the registration procedure. When you click the [Save] button, the case that the user is successfully registered UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 35 When you click the [Save] button, the case that the user fails to register

: The case none of authentication methods such as fingerprint, iris, card or password is registered. When you click the [Auth Method]

button, the case none of authentication method is registered In [Register FP], the case you input the different fingerprint at the fingerprint registration. In [Register FP], the case you the fingerprint already registered. (But, you can input the same fingerprint with the same user ID). register tried to If you want to register the same fingerprint in the different ID, you should uncheck the Check similar FP feature from [System] ->[Finger]. But, in this case, since the same fingerprint can be authorized as different ID, it is not suitable for the time and attendance management. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 36 3.3.2. Delete The following window appears if you click [User] [Delete] at the main menu. Input the user ID to be deleted and click

[OK] button. Click [BACK] button to cancel and return. If you input the unregistered ID, the failure message Unregistered user appears, and if you input the registered ID, Deleted appears. the success message But, the deletion in the terminal is not led to the deletion in the server, so if you want to delete completely, you should delete it in the server. It deletes both user and admin, so you should be cautious, and the user registered only in the terminal is cannot be recovered. The followings are LCD guidance which can appear at the deletion procedure. When it is deleted normally. When unregistered ID was entered Deleted!

Unregistered!

UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 37 3.3.3. Modify The following window appears if you click the [User] [Modify] in the main menu. Input the user ID to be modified and click [OK] button. Click [BACK] button to cancel and return. The failure message appears if you input the unregistered ID, and if you input the registered ID, the information of registered user is represented as follows:

The icons at the left side means as follows.

: The number of registered irises

: The number of registered fingerprints

: Existence of password registration (1:

Registered / X: Not registered)

: The number of registered cards

(X,1~2)

(X,1~10)

(X,1~10)

: The user ID to register

: User

: Administrator If you touch the picture, you can register with re-taken picture. The modification method of each item is the same with the user addition, so refer to the 3.3.1. Add. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 38 3.3.4. Delete All If you click the [User] [Delete All] in the main menu, the following window appears. 3.3.5. View If you click the [User] -> [View] in the main menu, all the users registered can be searched as follows. If you want to delete all the users, click

[YES], and if you want to cancel, click

[NO]. If you click [YES], the users and the impossible once admin are restoration they are deleted, so be careful. deleted, and is The user list appears by the order of ID, and if you slide the screen upward, you can search the additional user list. The list appears in the unit of 100 people and if the list is more than 100 people, you can see the previous or next list by clicking [BACK] or [NEXT]

button.

[ID]: If you click the ID of a specific user, you can directly move to the modification window of the user.

[Delete]: If you select button at the right side and click the [Delete]

button, you can delete all the checked users at once. If you click [BACK] button on the top, you can move to the previous 3.3 User management menu. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 39 3.4. Network setting If you select [Network] in the main menu, the following window appears.

[ID]: If you input the User ID by clicking [ID] button, the user is searched like in the left picture. If you click [BACK] button in this window, you can move to the 3.3. User Management menu. list

[Name]: If you input the user name by clicking [Name] button, the registered user the including characters is shown. If you click [BACK] button in this window, you can move to the 3.3. User management menu. Ex) If you search as, it searches all the users including as as the left picture. Basic setting: Same with the left screen from is allocated Select the method [Static IP] if the static IP the connected network, and select [DHCP] if the IP is allocated from the DHCP server in the connected network. If you select [Static IP], set the IP address, subnet mask, and gateway. And if you select [DHCP], you dont have to set them. DNS entry is possible instead of IP in the

[Server IP], and if you use specific DNS server, input the IP address of [DNS]

server together. Check DDNS when typing DNS in order to type in English. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 40

[Port]: The basic port value of the authentication server (UNIS server) is 9870, and if you change the value, you should change the server program with the same value, so be cautious.

[Terminal ID]: It is a unique ID used for the terminal to distinguish the terminals and the default value is 1. It should be the same with the ID of the terminal registered in the server program and the characters can be set up to 9 digits for maximum.

[Wi-Fi]

If you touch the item you want to change, the keypad appears at the bottom. If the input is finished with the keypad, continue the input by touching [

button or the next input window. If you touch the background window which is not the keypad disappears. If you want to apply the changes, click

[Save] button, and return to the previous menu by clicking [BACK] button. input window, the When the Wi-Fi dongle is connected to the USB port on the backward of the device,

] will automatically be this icon [

activated as same as left picture.

[Notes]: If you want to apply the Wi-Fi dongle, you have to purchase it from our sales team since we cannot guarantee to cooperate 3rd party Wi-Fi dongle with our device. When the check box [Wireless Enabled]

is checked, the AP list around will be scanned automatically as the left picture. If you select the AP name from the AP list, the AP password will be asked and then the device will be connected to this AP when inputting the proper AP password. If you want to apply the changes, click

[Close] button, and the previous menu by clicking [BACK] button. return to UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 41 3.5. Application mode 3.5.1. Application If you select the [Application] in the main menu, the following window appears. In the application mode, you can select the [Access / TnA / Meal] according to the purpose. 3.5.1.1. Access or TnA setting the left side. It is the screen showing when you select Access. Click [OK] button to apply the changes, and click [BACK] button to cancel and return. Basic setting : Same with the window at the [OK] button It is the screen showing when you select TnA. Click to apply the changes, and click [BACK] button to cancel and return. Schedule (00:00~23:59): You can set the time for each authentication mode and if you do not need the function, set 00:00-00:00. During the set time, the set mode is always shown unless clicking another function button, and it is convenient for the TnA management because the indication mode is changed to the set authentication mode automatically though another mode was authorized by clicking another function key. The time periods should not be overlapped, but if they are overlapped, the application order is Attend (F1) Leave (F2) Out (F3) In (F4) Access. If the time is set between 23:00~01:00, it means from 23:00 to the 01:00 the following day. Blocking time (0~86400): This function prevents the same user to authorize again in the set time. There is no restriction if it is set 0, but if it is set bigger than 0, the user can authorize again when the set time (sec) is passed from the previous authentication. It can be set up to 86,400 seconds (24 hours). UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 42 3.5.1.2. Meal setting

It is the screen showing when selecting the meal management. You can set the time period of each meal type. And if the setting is not needed, set 00:00-

00:00. Allow duplicate : If it is unchecked

), each user can authorize once in the one meal, but if it is checked (

), the multiple authentication is possible regardless previous authentications. the of Click [OK] button to apply the changes, and click [BACK] button to cancel and return. 3.5.2. Function key The following window appears if you select the [Application] [Function key] in the main menu. Basic setting: Same with the window at the left side. if you click Fn key It means the [F1] ~ [F4], [Access]

button used to change the authentication mode such as attendance and leaving, and the authentication mode is changed to the mode. Because only the checked buttons are represented on the basic window, you can use with unchecking other function keys when using as device only for the attendance or leaving the Fn key, Click [OK] to apply the set value, and click [BACK] button to move to the previous menu. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 43 3.6. System 3.6.1. System The following window appears if you select the [System] [System] in the main menu. Basic setting: Same with the window at the left side the priority of User ID Length It sets the length of the user ID, and it can be 2~9 digits and should be the same with the length of the registered ID of the server program. If the ID registered in the server program uses 000075 as a 6 digits ID, set 6. Authentication It determines the authentication between the terminal and network server and there are 4 modes Terminal Only, Server Only, Terminal/Server, Server/Terminal.

[Terminal Only]: It only authorizes the user registered in the terminal.

[Server Only]: It only authorizes the user registered in the server.

[Terminal/Server]: It authorizes the user registered in the terminal as 1:N identification but it authorizes the user in the server as 1:1 verification if failed.

[Server/Terminal]: It authorizes the in server as 1:N user the network identification but between is disconnected, it authorizes the user registered 1:N identification if failed. registered terminal terminal server and as in if UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 44 Mandatory Registration It determines the items which should be entered in the user registration, and the user can be registered when all the checked items are entered. The number of registered fingerprints is only valid when the [Fingerprint] is checked. Click [OK] button to apply the set value, and click [BACK] button to cancel and return. If you click the [OK] button without changing the set value, it is moved to the previous menu directly. Click the menu button at the left side to set additionally. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 45 3.6.2. Finger The following screen appears if you select the [System] -> [Finger] in the main menu. Basic setting: Same with the window at the left side 1:N Level (3~9) It is the authentication level used in the 1:N Fingerprint authentication. In case of 1:N authentication, the authentication level is not set for each user, so the authentication level of the terminal is always the standard. 1:1 Level (1~9) It is the authentication level used in the 1:1 Fingerprint authentication. But, in case 1:1 authentication level is not set 0 (using the authentication level of the terminal), it follows the 1:1 authentication level of the user. user whose the of Fake Finger Detection It sets the LFD level to prevent the fake fingerprint input. If you set the LFD level higher, the preventing function of the fake fingerprint input such as rubber, paper, film, or silicon can be more strengthened, but the fingerprint also can be hard to enter if the finger is dry too much. FP template format It determines the format of fingerprint template. When some applications using SDK need another format of the fingerprint, the fingerprint template format of the terminal can be changed. But, if using UNIS server, it should be set the same with the template format of the server.

- Union: It is the default setting and the volume is 400 bytes for each template. It is the most optimized format related with all the functions using fingerprint (1:1 level, 1:N level, authentication speed, and fake fingerprint detection), and the authentication can be fulfilled rapidly and correctly.

- ISO Standard: Fingerprint data is saved as ISO template which is 500 bytes for each

- ISO Extended: Fingerprint data is saved as ISO template which is 600 bytes for each template. template. If you change the template format of the fingerprint, the following message box appears. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 46 Notes Check similar FP Multi FP If you click the [YES] button, the new format is applied, and if you click the [NO]

button, the format value before the change is maintained. If you change the fingerprint template format, all the registered fingerprints are deleted, so be cautions.

), the re-registration as another user ID is prevented by checking if If it is checked (

the fingerprint is already registered. Similar fingerprints are checked against users who ticked the 1:N option. (100,000 fingerprints limit)

), all the registered fingerprints should be authorized after the ID If it is checked (

(or card) input. If it is checked, the user should input the user ID or card, the option

) automatically.

[Enable 1:N] will be unchecked (

It is the function used when managing the access control of the special area strictly. For example, if the user with ID 0001 has three fingerprints registered, the user should be authorized with all three fingerprints after entering ID. In this case, the order of three fingerprints is not important, but if one of the fingerprints is failed to be authorized, the authentication is failed. Enable 1:N

), the user can be authorized only with the fingerprint without user If it is checked (

ID or card. Though the user is registered by enabling 1:N authentication, in the terminal where the option is not checked, only the 1:1 authentication is possible. Click [OK] button to apply the set value, and click [BACK] button to cancel and return. If you click [OK] button without changing the set value, it is moved to the upper menu automatically. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 47 3.6.3. Iris Basic setting: Same with the window at the left side is in the level used Matching Level It iris authentication, and it can be set 1~5 levels according to the accordance degree with the registered iris. And the authentication is successful when the accordance degree is higher than the set authentication level. If the authentication level is higher, the security level will be higher, but you can also fail to authenticate easily due to the high requirement for the accordance level. Detection Level (0-50) It is the level used when detecting the position of eyes. The higher the level is, the more accurate position is detected. However, if you use a mask, you need to lower this level (below 10) to detect the eye position and try the iris authentication. Click [OK] button to apply the set value, and click [BACK] button to cancel and return. If you click [OK] button without changing the set value, it is moved to the previous menu automatically. 3.6.4. Auth If you select the [System] [Auth] in the main menu, the following window appears. Basic setting: Same with the window at the left side UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 48 Auth Type: Select the authentication method of the terminal.

- Card: Even if the user is registered with the authentication method requiring the iris, fingerprint or password with the card, you can authenticate only with the card in the terminal that this option is checked. For the fingerprint, iris, or password users, they can authenticate as their authentication method.

- Fingerprint: Even if the user is registered with the authentication method requiring the iris, fingerprint or password with the fingerprint, you can authenticate only with the fingerprint in the terminal that this option is checked. For the fingerprint, iris, or password users, they can authenticate as their authentication method.

- Iris: Even if the user is registered with the authentication method requiring the card, fingerprint or password with the iris, you can authenticate only with the iris in the terminal that this option is checked. For the card, fingerprint and password users, they can authenticate as their authentication method.

) in the box, the iris authentication is only operated with 1:1 mode. Iris 1:1 Only When checking (

3.6.5. Date/Time If you select the [System] [Date/Time] in the main menu, the following window appears. Basic setting: Same with the window at the left side Time synchronization It determines the synchronization method between the current time of terminal and server. If you want automatic synchronization, set [Auto], and if you want manual synchronization, set [Manual]. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 49 Display Format It is the method to indicate the current time of terminal.

- yyyy-mm-dd: It shows as the order of year, month, and date.

- dd-mm-yyyy: Order of date, month (English), and year. Set Date / Set Time It changes the current time of the terminal. If the server is connected and the [Time synchronization] is set [Auto], you dont have to change since it is synchronized with the server time. Click [OK] button to apply the set value, and click [BACK] button to cancel and return. 3.6.6. Database If you select the [System] [Database] in the main menu, the following window appears. If you want to delete all the users, click

[Delete all users] button. If you want to initialize the settings, click

[Delete setting] button. If you want to initialize the authentication record, click [Delete Log] button. If you want to delete image log only, click

[Delete image log] button. If you want to delete all the data and initialize with the factory setting, click

[Factory init] button. If you want to move to the upper menu, click [Close] or [BACK] button. 3.6.6.1. Delete all the users If you select the [System [Database] [Delete all users] in the main menu, the following window appears. If you want to delete all users, click [YES] button, and if you want to cancel, click [NO] or [X] button. If there is no signal for 5 seconds in this state, the message box disappears without deletion. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 50 If deletion is succeeded by clicking [YES], the following success message box appears. In this case, both the users and administrator are deleted, and the restoration is impossible once the data is deleted.

<Fig. 3-5>

3.6.6.2. Delete setting If you select the [System] [Database] [Delete setting] in the main menu, the following screen appears.

] button to cancel. Click [YES] button to initialize all the set values, and click

[NO] or [

If there is no signal for 5 seconds in this state, the message box disappears without initialization. If it is successfully deleted by clicking [YES], the success message in <Fig. 3-5> is displayed and the display language and voice are changed to the default value of English. It initializes all the setting value of terminal except for the MAC (Physical) address and

[FP template format] but the user and authentication log are not deleted. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 51 3.6.6.3. Delete Log If you select the [System] [Database] [Delete log] in the main menu, the following window appears. If you want to delete all the authentication record in the terminal, click [YES] button, and if you want to cancel, click the [NO] or [

If there is no signal for 5 seconds in this state, the message box disappears without deletion.

] button. If it is deleted successfully by clicking [YES], the success message in [Fig. 3-5] is displayed. All the authentication log is deleted including image log, and the restoration after the deletion is impossible. 3.6.6.4. Delete Image log If you select the [System] [Database] [Delete image log] in the main menu, the following window appears. If you want to delete all the authentication record in the terminal, click [YES] button, and if you want to cancel, click the [NO] or [

If there is no signal for 5 seconds in this state, the message box disappears without deletion.

] button. If it is deleted successfully by clicking [YES], the success message in [Fig. 3-5] is displayed. The image saved as a log is only deleted and the authentication log is not deleted. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 52 3.6.6.5. Factory init If you select the [System] [Database] [Factory init] in the main menu, the following window appears.

] button. If you want to initialize the terminal in the factory setting, click [YES] button, and if you want to cancel, click [NO]

or [

If there is no signal for 5 seconds in this state, the message box disappears without initialization. If it is deleted successfully by clicking [YES], the success message in <Fig. 3-5> appears, and the display language and voice are changed to the default value of English. All the set value, users and log information except for the MAC address in the terminal makes the terminal as the factory setting. The restoration after the deletion is impossible, so be careful. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 53 3.7. Terminal 3.7.1. Sound If you select the [Terminal] [Sound] in the main menu, the following window appears. Basic setting: Same with the window at the left side. Voice Volume Scroll from side to side in 0~15 degrees to set the voice volume. If you click

] button at the right side, the the [

voice is played to check the volume. Beep Volume Scroll from side to side in 0~3 degrees to set the beep volume. If you click the [

] button at the right side, the beep sound is played to check the volume. Sound Option failure.

- Sound Effect: The sound effect can be output on authentication of success or

- User Voice: If the user wants to change the voice played when the authentication is successful or failed, the user voice can be played if the user copies the sound into terminal and check the option. The method to copy the sound into the terminal can be referred in 3.10 [SD card] [Theme] or [3.11.2 How to change voice sound].

- Stored Voice: The stored voice is played on authentication of success of failure. Click [OK] button to apply the set value, and click [BACK] button to cancel and return. If you want to set another items, click the menu you want to change at the left side. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 54 3.7.2. Option If you select the [Terminal] [Option] in the main menu, the following window appears. Basic setting: Same with the window at the left side Read Card number: If the user places the card in this screen, the card number is displayed on the LCD. You can change the [Card format] to check the card number according to the set value. Lock terminal: This function enables the the administrator terminal directly on the terminal, not on the server program. If it is checked lock or unlock to

), none can access due to the lock the the administrator removes

until setting. Card reader: You can set Standard or iClass which can be recognized HID depending the card of set type. Card format It determines the representation method of the card number. The card number is changed according to the following settings. So if you have to change the card expression method, you should register the card again.

[RF card example] Card number (5byte): 08h 01h 16h 1Dh D6h Card format Card number Expression Standard 02207638

(3+5) digits decimal

[022(16h)+07638(1DD6h)]

Hexadecimal 0801161DD6 10digits hexadecimal 10 Digit Decimal 0018226646 Posterior 4byte: 10digits decimal

(01161DD6h) 3,5 Digit Decimal 02207638 Same with [Standard]

6 Digit Hexadecimal 161DD6 Posterior 3byte: 6digits hexadecimal UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 55

[SC card example] Card number (4byte): 52h 9Dh 06h E3h Card format Standard Card number Expression 529D06E3 8 digits hexadecimal Hexadecimal E3069D52 8 digits hexadecimal with changing the order of byte 10 Digit Decimal 1386022627 hexadecimal 529D06E3: 10 digits decimal 3,5 Digit Decimal 3808861522 hexadecimal E3069D52: 10 digits decimal 6 Digit Hexadecimal 069D52 Locate the foremost 3bytes backwards. 3.7.3. Input Click [OK] button to apply the set value, and click [BACK] button to cancel and return. If you select the [Terminal] [Input] in the main menu, the following window appears. Basic setting: Same with the window at the left side. M0: It is set when connecting the external access point to the DM0

(When using motor lock, set [Door Monitor NO] or [Door Monitor NC].)

-None: When nothing is connected.

-Door Monitor NO or Door Monitor NC: When the door open monitoring pin was connected.

-Fire Monitor NO or Fire Monitor NC: When the fire detection sensor is connected.

-Panic Monitor NO or Panic Monitor NC: When the panic situation detection sensor is connected.

-Emergency Monitor NO or Emergency Monitor NC: When the emergency situation detection sensor is connected. Set NO/NC depending on the state of pin input in detection. M1/M2: Set when connecting the external access point to DM1/DM2

(When using motor lock, set [Lock Monitor NO] or [Lock Monitor NC].)

- None: When nothing is connected.

- Lock Monitor NO or Lock Monitor NC: When the lock monitoring pin was connected.

- Fire Monitor NO or Fire Monitor NC: When the fire detection sensor is connected.

- Panic Monitor NO or Panic Monitor NC: When the panic situation detection sensor UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 56 is connected.

- Emergency Monitor NO or Emergency Monitor NC: When the emergency situation detection sensor is connected. Set NO/NC according to the state of pin input in detection. IO: Set when connecting the external access point to the Exit pin.

- None: When nothing is connected

- Inside Open NO or Inside Open NC: When the exit button was connected

- Fire Monitor NO or Fire Monitor NC: When the fire detection sensor is connected.

- Panic Monitor NO or Panic Monitor NC: When the panic situation detection sensor is connected.

- Emergency Monitor NO or Emergency Monitor NC: When the emergency situation detection sensor is connected. Set NO/NC according to the state of pin input in detection Warn door open (sec) This is a function that checks the time when the door is opened by the terminal and sounds a warning sound if it is open beyond the set time (0 or minimum 5 seconds to maximum 60 seconds). If it is set to [0], the warning sound does not sound at all. Even if it is set to [01~04], the warning sound starts to sound after at least 5 seconds have elapsed. The door must be closed within the set time, but if the door is not closed due to unforeseen circumstances, a beep will sound to inform you that the door has not been closed so that you can take action to close it normally. To use this function, the lock must be monitored whether it is currently open or closed, and the monitoring pin of the lock must also be connected to M0. Also, the previous M0 must also be set to [Door Monitor NO] or [Door Monitor NC]. Tamper alarm If it is checked(

), a warning sound will be played when the terminal is disassembled. Click [OK] button to apply the set value, and click [BACK] button to cancel and return. 3.7.4. Lock If you select the [Terminal]->[Lock] in the main menu, the following windows appears. Basic setting: Same with the window at the left side. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 57 Lock 1 Option

- None: When it is not used

- Strike/Auto/OK: When the warning light is connected to indicate the strike type, auto door, or authentication success/failure on Lock1.

- Motor Lock 1: When the motor lock is connected.

- Schedule alarm: When the siren setting of the terminal option was sent to the terminal, it sends the operating signal about it.

- Duress alarm: When the fingerprint registered as a duress FP is authenticated Lock2 Option

- None: When it is not used

- Fail: When connecting the light to Lock 2 to indicate the authentication failure

- Motor Lock 2: When connecting the motor lock

- Schedule alarm: When the siren setting of the terminal option is sent to the terminal, it sends the operating signal about it.

- Duress: When authenticating with the duress fingerprint Lock 1 duration (ms) When Lock 1 is set Strike/Auto/OK, it determines the signaling time. Because it is set in ms unit, if you want to set 3 seconds, you should set 3000. The strike type means the time until the door is locked again when opening the door after authentication. Lock 2 duration (ms) It sets the signaling time when Lock 2 is set Authentication failure notification. Click [OK] button to apply the set value, and click [BACK] button to cancel and return. Because it is set in ms unit, if you want to set 3 seconds, you should set 3000. 3.7.5. External Device If you select the [Terminal] [External device] in the main menu, the following window appears. Basic setting : Same with the window at the left side RS232: It sets the device connected to RS232 port

-None: When there is no device connected to the RS232 port

-Ticket Format 1/ Ticket Format 2: The authentication result is printed when the authentication is successful. The terminal ID, user ID, authentication time, and UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 58 authentication mode are printed by the printer connected to the RS232 port. The printing format differs as per the setting, and when setting as [Ticket Format 2] the text for meal printer which is set from the terminal option, becomes the title on the top side. The printer used to print ticket is SRP-350 serial type model. None 26bit 34bit RS485: It sets the connecting device to RS485 port.

- None: When there is no device connected to RS485.

- LC010: When LC010 is connected.

- LC015: When LC015 is connected Site code It sets the site code value sent in Wiegand output below. Wiegand Output It is used only when the special controller is equipped running by the Wiegand input. When the authentication is finished, the data of the following format is sent to the Wiegand port of the terminal. General case. It does not use Wiegand out port. Because it sends Site code [1byte] + User ID [2 bytes], set the user ID less or equal than 4 digits. Send example) In case of SiteCode:045(2Dh), UID:6543(198Fh) 1 00101101 0001 1001 10001111 0 Because it sends Site code [1 byte] + User ID [3 bytes], set the user ID less or equal than 7 digits. But, if the user ID is 8 digits, ignore site code and send only the User ID [4byte]. Send example) SiteCode:001(1h), UID:123456(1E240h) 0 00000001 00000001 11100010 01000000 0 Custom It is set by the user definition, which only can be set in the server, and the setting type only can be inquired in the terminal. Click [OK] button to apply the set value, and click [BACK] button to cancel and return. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 59 3.8. Display 3.8.1. Theme If you select [Display] [Theme] in the main menu, the following window appears. Basic setting: Same with the window at the left side Background Set the back ground in the main screen. Select [

] button to see the next image. Click [OK] button to apply the set value, and click [BACK] button to cancel and return. If you want to set other items, select the button for that item. 3.8.2. Camera If you select the [Display] [Camera] in the main menu, the following window appears. Basic setting: Same with the window at the left side image displayed Display Option Select the in the message window of authentication success

- None

- Registered photo

- Authentication method: Image stands for each authentication method Save success log If it is checked (

), the camera image is captured as image log when the authentication was successful. Save failed log

), the camera When it is checked (

image is captured as image log when the authentication was failed. Click [OK] button to apply the set value, and click [BACK] button to cancel and return. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 60 3.8.3. Language If you select the [Display] [Language] in the main menu, the following window appears. Basic setting: English Language If you change the language and click

[OK] button, the voice message and language are changed the set language. If you want to cancel and move to the upper menu, click [BACK] button. to Supported languages English, Korean, Japanese, Portuguese, French, Polish, Spanish, Chinese(Traditional), Chinese(Simplified), Persian, German Basic setting: Same with the window at the left side. Screen saver (5sec ~ 10min)) If there is no input for set duration, the LCD screen is turned off automatically. But, if you set None in [Screen saver] is always turned on. 3.8.4. Option If you select [Display] [Option] in the main menu, the following window appears. Display Option It sets what will be shown at the LCD screen when the authentication succeeds

- None: The authentication result [Success/Failure] is only represented.

- User ID

-User Name: Representing user ID if it is not registered. (In this case, added ID in order to differentiate with name)

- Social No: Representing user ID if it is not registered. (In this case, added ID in order to differentiate with employees number) Click [OK] button to apply the set value, and click [BACK] button to cancel and return. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 61 3.8.5. Message display time If you select the [Display] [Message display time] in the main menu, the following window appears. Click [OK] button to apply the set value, and click [BACK] button to cancel and return. 3.9. Terminal Info 3.9.1. System If you select the [Terminal info] [System] in the main menu, the following window appears. Basic setting: Same with the window at the left side. authentication Message Display (ms) It sets the time that the authentication window is displayed. 0~5000 is available for the value, and result window the appeared and disappear the duration. Because it is set in millisecond, if you want to set 2 seconds, you should set 2000. for System info The hardware and firmware version of terminal is shown. it is high, the using size Disk (using size / Total size) It shows the using size of the hard disk. If is represented in red. Ram (using size / Total size) The using size of RAM among the all size is represented. If represented in red. the using size is high, is it Click [BACK] button to finish the inquiry and move to the previous menu. Click the menu on the left side to inquire additional item. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 62 3.9.2. Terminal If you click the [Terminal info] [Terminal] in the main menu, the following window appears. Terminal info It represents the option setting value of the terminal. Click [Close] or [BACK] button to finish the inquiry and move to the upper menu. 3.9.3. Network If you select the [Terminal info] [Network] in the main menu, the following window appears. Network info It shows the setting value of the terminal. If you want to finish the inquiry and move to the previous menu, click [Close] or [BACK]

button. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 63 3.9.4. User If you select the [Terminal info]->[User] in the main menu, the following window appears. Click the [Close] or [BACK] button to finish the inquiry and move to the upper menu. 3.9.5. Log If you select the [Terminal info] [Log] in the main menu, the following window appears. User

- User: The number of users registered

(including administrator)

- Admin: The number of the administrators registered.

- FP: The number of all the fingerprints registered.

- FP 1toN: The number of fingerprints which can be authorized by 1:N

- Iris: The number of registered irises

- Iris1toN: The number of iris available for 1:N authentication

- Card: The number of cards registered

- Photo: The number of users who registered the picture Max is the maximum number of registration for each item. Log Log: The number of logs saved in the terminal Image Log: The number of image logs saved in the terminal.

(Max means the maximum number of items which can be saved in each item.) log time and authentication View Log Displays result. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 64 Log Search To search log, follow the following steps,

[Terminal Info] [Log] [View Log] [Log Search]. And then set the Start Date, End Date and Event criteria and click [OK]. View Log Log search result shows the information such as the date, time, ID and access result (success or failure). Click [BACK] or [NEXT] button to see the search information. If you want to finish the inquiry and move to the previous menu, click [Close] or [BACK]

button. 3.9.6. About If you select the [Terminal info] -> [About] in the main menu, the following window appears. About It shows the license information applied in the terminal. If you want to finish the inquiry and move to the previous menu, click [Close] or

[BACK] button. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 65 3.10. USB If you select [USB] in the main menu, the following screen appears.

<When USB memory is inserted>

<When USB memory is not inserted>

This operation is available only when USB memory is inserted. In case of some USB memory, since it cannot be recognized, please use the other USB memory in this case. It is the feature to back up the data of the terminal via [Export]. You can copy the back-up data to the terminal via [Import]. Export UbioXiris/config. It copies the data from the terminal to the USB memory

- User Data: It copies the user DB to the folder unisuser of USB memory.

- System Option: It copies the option setting values of the terminal to the folder of

- Event Log: It copies the authentication log DB to the folder of UbioXiris/Terminal ID

(8 digits) /log folder, (At this time, it doesnt copy the image log.) UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 66 It can set the period to copy the event log.

- Picture: The image log is saved in the folder of UbioXiris/Terminal ID (8 digits)/log/pictures in USB memory as .jpg file.

- Export All: It can export all of them, specifically the user data, system option, event log to the folder of USB memory. Import Others It copies the data from the USB memory to the terminal.

- User Data: It copies the user DB from the USB memory to the folder unisuser in the terminal.

- System Option: The option setting value of the terminal is copied to the folder UbioXiris/config folder in the terminal. After importing the data, you should reboot the terminal to apply the new DB or setting value.

- Theme: The voice file in the UbioXiris/audio folder in the SD card is copied to the terminal. If you want to replace the authentication success (user_ok.mp3) and the authentication fail (user_fail.mp3) message with the user voice, set the name of the user voice file as

(user_ok.mp3) and (user_fail.mp3) each which the user voice will play. And also the checkbox User Voice on [3.7.1. Sound] should be checked.

- F/W Upgrade: It upgrades the FW from USB memory.

(The firmware should be in UbioXiris folder from USB memory. If you finished this operation and move to the previous menu, select [OK] or [BACK]

button. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 67 3.11. Download the user file If needed, it is the feature that the user can change the background and voice message. You can copy it by using USB memory or change the user file by downloading it from UNIS server program. 3.11.1. Change the voice message If you select the Download customized file in the UNIS program, the following window appears. If you select Success Voice File (.wav) as the file type and click Send button after selecting the sound file (.wav or mp3), the terminal selecting window appears. If you select the terminal in the terminal list window and click the Send button again, the file is sent and the result of download appears. In this time, the file name should be less than 15 letters (English, 15byte) including extension and mp3 format. In case of Fail Voice File (.wav), you can set Fail Voice File (.wav) and change as same method above. If you want to change back to the basic sound from the users sound, uncheck the checkbox User Voice at the 3.7.1 [Terminal] [Sound]. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 68 4. How to use the terminal The background image and composition of the basic window can be changed depending on the administrators setting. In addition, if the administrator sets the screen saver time, the LCD screen is turned off automatically if there is no action for set time, and when the user accessed to the terminal, tried the authentication with fingerprint/card, or touched the main screen, the LCD screen is automatically activated. 4.1. How to change Auth mode Card sensing area

<Fig. 4-1>

Select the function key button among Attend [F1], Leave [F2], Out [F3], and In [F4]

button to change the auth mode as you want. The current auth mode can be checked as the button status below. If there isnt the selected mode button as <Fig. 4-1>, it is the access mode. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 69 The status that is not selected The status that is selected 4.2. How to input the user ID If you click the button [ID] on the basic window, following the window Input User ID as below. Enter the user ID to authenticate and click [OK] button, then the input screen of fingerprint, iris, card or password is displayed. 4.3. Authentication 4.3.1. Iris authentication 1:N Authentication (Identification) Locate your eyes in the LCD guideline until the guideline changes to blue. And when it turns blue, stare at the camera and pause for a moment to try authentication. 1:1 Authentication (Verification) As shown in the following figure, enter your ID first by clicking [Input ID] button, and when the iris input message appears, locate your eyes until the LCD guideline is turned blue, and stare at the camera and stop moving. If the input is not available, the message box is changed to gray and 1:1 authentication is cancelled. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 70 4.3.2. Fingerprint authentication 1:N Authentication (Identification) If you put your fingerprint on the fingerprint sensor at the basic window, the fingerprint is entered with the light on the sensor with beeping. Do not take off your finger until the light of the sensor turns off completely. 1:1 Authentication (Verification) As shown in the following figure, enter your ID first by clicking the [Input ID] button, and input your fingerprint when the fingerprint entering window appears and the light is turned on at the fingerprint sensor. Do not take off your finger until the light of the sensor turns off completely. 4.3.3. Card authentication Place the card on the card picture <Fig. 4-1>. 4.3.4. Password authentication 4.3.5. Multi authentication Input your ID by clicking [ID input] button as follows and input the password when the password input window appears. For the user who needs to authenticate more than 2 methods such as Card & FP and Card & FP & Iris, the preferential precedence of the authentication after ID is as follows:

Card -> Fingerprint -> Iris -> Password in order. This is activated even if the iris or fingerprint authenticates firstly. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 71 FCC Information two conditions :

This device complies with part 15 of the FCC Results. Operation is subject to the following

(1) This Device may not cause harmful interface, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is 1.4. Consult the dealer or experienced radio/TV technician for help. connected. WARNING Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr UBio-X Iris User Guide 72 CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibilityof exceeding the FCC radio frequency exposure limit. Contains FCC ID: 2AEEY-PBLN51822M UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr

 

 

 

 

 

 

 

 

 

 

Page 1 of 1 IDENTIFICATION LABEL:

PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the rear side of the equipment

 

 

 

 

 

 

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: July 17, 2020 Subject; Request for Confidentiality FCC ID: XX2-UBIO-XIRIS To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Part List Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission' s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Dong Ho, Lee Title: Manager

 

 

Letter of Authorization Seoul, South Korea

: UNION COMMUNITY

: 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Company Address Product Name : Access controller Model Number : UBio-X Iris FCC Identifier : XX2-UBIO-XIRIS We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Dong Ho, Lee Title: Manager Date: July 17, 2020 Signature of applicant: