VS-R20D(SC & RF). User Guide Version Eng-1.00 Copyright 2000 By Union Community Co., LTD. Smart-i 2
<Revison History>
Version Date Description 1.00 2012-08-
22 Initial Release Firmware Version 10.51.00-
000.00
< Glossary >
Authentication Method
- RF (Card) Authentication
/ 44-3 3 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr Smart-i 3 Table of Contents
<Revison History> ..................................................................................... 2
<Glossary> ........................................ ! . 1. Before use ..................................... ! . 1.1 Safety Precautions ................... ! . 1.2. Terminal Descrpiton ........................................................................ 5 1.3. LED signal during operation
! . 1.4. Buzzer sound during opertaion .......................................................... 6 2. Introduction .................................... ! . 2.1. Features .................................. ! . 2.2. Configuration ............................ ! . 2.3. Specifications ........................... ! . 3. How to use a terminal .......................................................................... 10 3.1. Authentication ............................................................................... 10 3.2.1. Card authentication ................................................................ 10 3.2. Dip switch setting .......................................................................... 10
/ 44-3 3 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr Smart-i 4 1. Before use 1.1. Safety precautions
Warning Handling with wet hands or allowing liquid to flow into it is not advised.
-> It may cause an electric shock or damage Do not disassemble, repair, or modify the unit.
-> It may cause an electric shock, fire or damage. Do not place a fire source near the unit.
-> It may cause a fire. Keep out of reach of children.
It may cause an accident or damage.
- If the above warnings are ignored, it may result in death or serious injury.
Cautions Keep away from direct sunlight
It may cause deformation or color change. Avoid using water, benzene, thinner, or alcohol for cleaning
-> It may cause an electric shock or fire. Keep the fingerprint area clean.
It cannot read fingerprints correctly. Avoid impacts or using sharp objects on the unit.
The unit may be damaged and broken. Avoid high humidity or dust
->The unit may be damaged. Do not place a magnet close to the unit.
-> The unit may break down or malfunction. Avoid using insecticides or flammable sprays near the unit.
It may result in deformation or color change. Avoid severe temperature changes
The unit may be broken.
-- If the above cautions are ignored, it may result in property loss or human injury. Under no circumstances will Union Community be responsible for accidents or damages caused by inappropriate use of the product caused by not referring to the user manual.
/ 44-3 3 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr Smart-i 5 1.2. Terminal Description 1.3. LED Signal during operation Abnorm al Red ON: When authentication is failed Success Green ON: When authentication is successful State White Flickering: Waiting for a card to input ON: If is set as LED is always ON in terminal settings
/ 44-3 3 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr Smart-i 6 1.4. Buzzer sound during operation ppig ppibig Pressing a key or a reading a card Failed ppiiiick Successful When a button is pressed or a card is being read When fingerprint input is completed, allowing the user to remove his fingerprint Authentication failed or wrong user input Authentication successful or settings for the current user are completed.
/ 44-3 3 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr Smart-i 7 2. Introduction 2.1. Feataures
Quick and convenient authentication function
- Simple and quick authentication with only using a card
Card authentication method provided
- 125khz card and 13.56Mhz card supported per product
IP65 Outdoor Rating Die Cast Casing : The terminal can be installed outdoor.
Understated Design
- Simple and understated design with minimum interface reflected without LCD
- Pursuit of convenience and luxury from simplicity
Convenient Auto Sensing function
- Simple authentication process without any key input; simple fingerprint touching is sufficient.
Various and flexible access management provided
- Perfect control function provided by giving the right of access per user group
/ 44-3 3 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr Smart-i 8 2.2. Configuration
/ 44-3 3 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr Smart-i 9 2.3. Specifications Item CPU LED Flash Spec 32bit RISC 72MHz 3 LED (Red, White, Blue), Internal 256k Byte Buzzer Sound Possible to control volume Card Module 13.56MHz Smart (1 Sam Card Socket Support) 125KHz RF Authentication Method 125KHz HID Card Card 4 Dip Switch I/O
(485 ID Setting : 3pole, Changing 485<->Wiegand In/Out Description ST Micro Nor Flash
- If POE is supported, separate lock Controller is used
- If POE is supported, EM, Strike, Motor Lock are possible to use 1 Port 1 Port 3 Port 12 VDC Interworking with 485 Controller Display Wiegand signal output or success/fail Debug Lock Control RS-485 Wiegand-Out RS-232 Power
/ 44-3 3 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr Smart-i 10 3. How to use a terminal 3.1. Authentication 3.2.1. Card Authentication
- Swipe a card on the card input area. 3.2. Dip Switch Setting
- It has 4 switches, and they are divided in 485 ID Setting (3pole) and changing 485 <->
Wiegand (1pole) 1 2 3 4 5 6 Functio n 485 ID Setting and Wiegand bit Setting 485 <-> Wiegand changing Not using
/ 44-3 3 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr Smart-i 11
- 485 ID Setting (No.1,2 and 3 Switch) Function 1 0 0 0 0 1 1 1 1 2 0 0 1 1 0 0 1 1 3 0 1 0 1 0 1 0 1 ID Value 0 1 2 3 4 5 6 7
- Wiegand Setting (No.1,2 and 3 Switch) Function 1 0 1 2 0 1 3 0 1 Bits 26bit 34bit
- Changing 485 <-> Wiegand (No.4 Switch) Function 4 1 0 Mode Wiegand RS485
/ 44-3 3 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr Smart-i 12
* NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT.
/ 44-3 3 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr