FCC ID: 2A2YB-ALA Wireless Earbuds

Website: athloslive.com

Facebook: facebook.com/AthlosLive

Instagram: instagram.com/athloslive/

Questions? athlos-team@athloslive.com

Athlos Live Control Slider

An innovative way to create world-class waterproof protection

The slider is on the RIGHT earpiece. You’ll hear voice cues for all sliding actions.

The slider is stronger than it looks! It will detach from a magnet when moved and come right

back in place after releasing – kind of like a yoyo!

Similar to a joystick

Slide back: On/Off & Play/Pause

Power ON/OFF:

PLAY/PAUSE: Slide-back and release.

BT wireless ON/OFF: Slide-back and hold until you hear a beep, then immediately release.

Slide-back and long hold in place. Your downloaded music will begin to play.

NOTE: if no music is downloaded, the earbuds will start wireless pairing.

Slide up: Increase Volume & Skip to Next

Volume Up: Slide up and release.

Next: Slide up and hold in place (next song while music is playing).

Slide down: Decrease Volume & Skip to Previous

Volume Down: Slide down and release.

Previous: Slide down and hold in place (previous song while music is playing).

Power On

Power Off

Volume +/-

Pause

Play

Next/Previous Track

Connect to another device

Slider Controls Reference

Slide back and hold in place until you hear “power

on”.

Slide back and hold in place until you hear “power

off.” You’ll have to hold for longer than when you

are powering on.

Slide up and release to increase volume. Slide down

and release to decrease volume.

While music is playing, slide up and hold in place

until you hear “next” to skip to the next track. Slide

down and hold in place until you hear “previous” to

rewind/go to the previous track.

Slide back and release while music is playing. You’ll

hear “pause.”

Slide back and release while music is paused. You’ll

hear “play.”

Slide back and hold until you hear a beep sound,

then immediately release. You will hear “searching

for devices.” You will hear “audio connected” when

your earbuds are ready to stream audio from the

device.

Avoid very sudden motions: slide smoothly on the surface. Do not lift or flip the slider.

Keep the slider within the pear-shaped area. You do not need to slide far from the center position.

Tips:

Getting started for the first time

Congratulations on receiving your new Athlos Live earbuds! Now, get ready to transform the way you work

out! To get started, you'll want to do a few things:

1) Pick an eartip size that works best for you. Choose the size that fits your ear best, and familiarize yourself

with adjusting the earhooks for a perfect fit. Important: Athlos Live earbuds have specialized swimming

eartips that must be used for water activities like swimming or showering.

Land

Water

2) Turn on your earbuds using the innovative buttonless controls. Most electronics use buttons that introduce

huge weak points for water leakage. Athlos Live uses a single magnetic slider to control all functions instead,

giving your new earbuds incredible waterproof capabilities! See the previous page for all slider controls.

3) Get used to the innovative buttonless controls! Since the magnetic slider is the first of its kind, it may take a

bit of getting used to. You’ll find that after some time, the slider will be much smoother than button controls.

4) [Optional] Add songs to your earbuds: Athlos Live earbuds have internal storage for songs so you don't need

to bring a phone or watch with you! You can store any mp3s you have on your computer by dragging and

placing them into the “MUSIC” or “USER” folder. Only mp3 files stored in the “MUSIC” folder will be played.

Preparing Athlos Live for the water

There are a few but very important steps you should follow before swimming with Athlos Live.

1) Make sure you are using the specialized Athlos swimming eartips.

NOT for water

Underwater

2) Tuck each earhook underneath your goggle straps. The goggle straps should be covering the

front and back of each earhook.

The key is to insert the earhooks under your goggle straps so that they cover the front and back!

3) You might have to increase the volume. This is because our swimming eartips naturally dampen

the volume slightly.

My device won’t turn on!

Troubleshooting

If the device cannot turn on, it could be because the battery has run out of charge. Please

charge the battery for a bit and then try turning the device on again.

The wireless connectivity is flaky or choppy

A simple reset can usually fix most issues. Try turning your earbuds off and back on again.

Oftentimes the issue can also be coming from the device that you are trying to connect your

earbuds to. It can help to turn on and off the wireless pairing of your phone or device.

I can’t connect my earbuds to my laptop with the micro-USB!

Make sure your earbuds are completely dry before plugging in the USB cable. Small amounts

of water can block USB connections and data transfers. Just wait for the earbuds to completely

air dry.

The earbuds sound muffled after I went swimming with them!

This probably means water leaked into the earbud speakers. Make sure you are using the

Athlos swimming eartips and are following the steps in the booklet before you go swimming.

Also make sure that your eartips are firmly snug around the tip of the earbud speaker.

FCC regulatory conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference. (2) This device must accept any

interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled

environment. This device and its antenna must not be co-located or operating in conjunction

with any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is applicable to only

Mobile Configurations. The antennas used for this transmitter must be installed to provide a

separation distance of at least 20 cm from all persons and must not be co-located or operating

in conjunction with any other antenna or transmitter.”

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE L E T T E R H E AD Authority to Act as Agent Date: August 30, 2021 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

Washington Technology International (Beijing) Ltd. otherwise notified, for applications to American Certification Body, Inc. (ACB). is authorized to act on our behalf, until We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b). to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Agency Agreement Expiration Date:

August 30. 2022

(Signature ) CFO Jessica Yen

(Print name) On behalf of:

UniRAM Technology, Inc.

(Company Name) Telephone:

650-691-8546 Thank you, By:

Title:

041521-14 1 - Must be signed by applicant contact given for applicant on the F CC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE

PLACED ON APPROPRIATE L E T T E R H E AD

Request for Confidentiality

Date: August 30, 2021

Subject: Confidentiality Request for:

F CC ID: 2 A 2 Y B - A LA

Pursuant to F CC 47 C FR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the

subject F CC application be held confidential.

Type of Confidentiality Requested

• Short Term

• Short Term

• Short Term

• Short Term

• Short Term

• Short Term

• Short Term

• Short Term

• Short Term

3 Permanent

• Permanent *'

El Permanent

• Permanent

• Permanent

Permanent

• Permanent *3

Exhibit

Block Diagrams

External Photos

Internal Photos

Operation Description/Theory of Operation

Parts List & Placement/BOM

Tune-Up Procedure

Schematics

Test Setup Photos

User's Manual

U n i R AM Technology, Inc.

has spent substantial effort in developing this product and it is one of the first

of its kind in industry. Having the subject information easily available to "competition" would negate the advantage

they have achieved by developing this product. Not protecting the details of the design will result in financial

hardship.

Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public

review due to materials that contain trade secrets and proprietary information not customarily released to the public.

1802

Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a

period of

avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant

is also aware that they are responsible to notify A CB in the event information regarding the product or the product is

made available to the public before the requested period has expired. A CB will then release the documents listed

above for public disclosure pursuant to F CC Public Notice DA 04-1705.

days from the date of the Grant of Equipment Authorization and prior to marketing. This is to

N O TE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not

considered applicable to IC applications.

Sincerely,

By:

(Signature/Title3)

(Print name) Jessica Yen

7,

1 - The asterisked items (*) require further information to be provided to A CB before permanent confidentiality will be extended to these

exhibits. Please refer to F CC K DB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific

information that must accompany these requests.

2 - Please refer to https://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf

3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent

for complete details.

letter has been provided. Letters should be placed on appropriate letterhead.

041521-14

Declaration of difference models Product name: Wireless Earbuds Main model: AthlosLive-01 AU-001, ALW-001 Series model: AL-001, AL-002, AL-003, AL-101, AL-102, AL-103, ALG-001, The difference between the models of Wireless Earbuds product applied for this time is only due to the different model name and different product size and color. Different models are assigned to different product sizes and colors. It's input, circuit principle, structure and key parts are the same. UniRAM Technology, Inc. 2021/08/30