FCC ID: HLEEA320BTNFL Industrial PDA

by: Unitech Electronics Co., Ltd. latest update: 2021-01-05 model: EA320BTNFL

Six grants have been issued under this FCC ID from 01/04/2021 to 01/05/2021 (this is one of twenty-eight releases in 2021 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked password defaults, troubleshooting guides, drivers, warrantee terms, & instructions.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Replacement

on Amazon

Trade-in? Recycling locations

eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.

eg for Slack usage

all	frequencies					exhibits	applications
		manual	photos		label

all exhibits 7
1
2
3
4
5
6

app s				submitted / available
1 2 3 4 5 6	User manual	Users Manual	pdf	81.39 KiB	January 05 2021
1 2 3 4 5 6	Int photos	Internal Photos	pdf	1.93 MiB	January 05 2021
1 2 3 4 5 6	External photos	External Photos	pdf	1.16 MiB	January 05 2021
1 2 3 4 5 6	Label	ID Label/Location Info	pdf	42.45 KiB	January 05 2021
1 2 3 4 5 6	Authorization Letter from original applicant	Cover Letter(s)	pdf	15.06 KiB	January 05 2021
1 2 3 4 5 6	FCC Request for change in ID	Cover Letter(s)	pdf	35.90 KiB	January 05 2021
1 2 3 4 5 6	Letter of Authorization	Cover Letter(s)	pdf	20.00 KiB	January 05 2021

exhibit
download
text

1 2 3 4 5 6

User manual

Users Manual

pdf

81.39 KiB

January 05 2021

FCC Caution 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

-Connect the equipment into an outlet on a circuit different from that to which the receiver is more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Consult the dealer or an experienced radio/TV technician for help. connected. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Operations in the 5.15-5.25GHz band are restricted to indoor usage only Specific Absorption Rate (SAR) information:

ThisDeviceemeetstheFCCgovernment'srequirementsforexposuretoradiowaves. Theguidelinesarebasedonstandardsthatweredevelopedbyindependentscientific organizationsthroughperiodicandthoroughevaluationofscientificstudies.Thestandards includeasubstantialsafetymargindesignedtoassurethesafetyofallpersonsregardlessof ageorhealth. FCCuncontrolledRFExposureInformationandStatementTheSARlimitis1.6W/kg averagedoveronegramoftissue.ThisdevicehasalsobeentestedagainstthisSARlimit.The highestSARvaluereportedunderthisstandardduringproductcertificationforproperlyuse onheadis0.421W/kg,Closetothebodyis1.184W/kg,hotspotmodeis1.184W/kg Thisdevicewastestedfortypicalbodysupportandhotspotoperationswiththebackof thehandsetkept1.0cmfromthebody.TomaintaincompliancewithFCCRFexposure requirements, useaccessoriesthatmaintaina1.0cmseparationdistancebetweenthe user'sbodyandthebackofthehandset.Theuseofbeltclips,holstersandsimilar accessoriesshouldnotcontainmetalliccomponentsinitsassembly.Theuseofaccessories thatdonotsatisfytheserequirementsmaynotcomplywithFCCRFexposurerequirements, andshouldbeavoided. InstructionofBodywornoperation SARcomplianceforbodysupportoperationisbasedonaseparationdistanceof1.0cm betweentheunitandthehumanbody.Ensurethatthedeviceaccessories,suchasadevice caseanddeviceholster,arenotcomposedofmetalcomponents.Keepthedeviceawayfrom yourbodytomeetthedistancerequirement.

exhibit
download
text

1 2 3 4 5 6

Int photos

Internal Photos

pdf

1.93 MiB

January 05 2021

exhibit
download
text

1 2 3 4 5 6

External photos

External Photos

pdf

1.16 MiB

January 05 2021

exhibit
download
text

1 2 3 4 5 6

Label

ID Label/Location Info

pdf

42.45 KiB

January 05 2021

exhibit
download
text

1 2 3 4 5 6

Authorization Letter from original applicant

Cover Letter(s)

pdf

15.06 KiB

January 05 2021

exhibit
download
text

1 2 3 4 5 6

FCC Request for change in ID

Cover Letter(s)

pdf

35.90 KiB

January 05 2021

exhibit
download
text

1 2 3 4 5 6

Letter of Authorization

Cover Letter(s)

pdf

20.00 KiB

January 05 2021

		frequency	equipment class	purpose
1	2021-01-05	2510 ~ 2560	PCE - PCS Licensed Transmitter held to ear	Change in Identification
2	2021-01-04	2412 ~ 2462	DTS - Digital Transmission System
3		2402 ~ 2480	DSS - Part 15 Spread Spectrum Transmitter
4			JBP - Part 15 Class B Computing Device Peripheral
5		5745 ~ 5825	NII - Unlicensed National Information Infrastructure TX
6		13.56 ~ 13.56	DXX - Part 15 Low Power Communication Device Transmitter

Application Forms

app s	Applicant Information
1 2 3 4 5 6	Effective	2021-01-05
1 2 3 4 5 6	Effective	2021-01-04
1 2 3 4 5 6	Applicant's complete, legal business name	Unitech Electronics Co., Ltd.
1 2 3 4 5 6	FCC Registration Number (FRN)	0023101058
1 2 3 4 5 6	Physical Address	5F, No. 136, Lane 235, Pao-Chiao Rd.
1 2 3 4 5 6		Hsin-Tien Dist., New Taipei City,, N/A
1 2 3 4 5 6		Taiwan

app s	TCB Information
1 2 3 4 5 6	TCB Application Email Address	c******@micomlabs.com
1 2 3 4 5 6	TCB Scope	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
1 2 3 4 5 6		A4: UNII devices & low power transmitters using spread spectrum techniques
1 2 3 4 5 6		A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices

app s	FCC ID
1 2 3 4 5 6	Grantee Code	HLE
1 2 3 4 5 6	Equipment Product Code	EA320BTNFL

app s	Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6	Name	B**** C**
1 2 3 4 5 6	Telephone Number	886-2********
1 2 3 4 5 6	Fax Number	886-2********
1 2 3 4 5 6	E-mail	B******@tw.ute.com

app s	Technical Contact
1 2 3 4 5 6	Firm Name	Unitech Electronics Co., Ltd.
1 2 3 4 5 6	Physical Address	Taiwan
1 2 3 4 5 6	E-mail	B******@tw.ute.com

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2 3 4 5 6	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2 3 4 5 6	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6	Is this application for software defined/cognitive radio authorization?	No
1 2 3 4 5 6	Equipment Class	PCE - PCS Licensed Transmitter held to ear
1 2 3 4 5 6		DTS - Digital Transmission System
1 2 3 4 5 6		DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6		JBP - Part 15 Class B Computing Device Peripheral
1 2 3 4 5 6		NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6		DXX - Part 15 Low Power Communication Device Transmitter
1 2 3 4 5 6	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	Industrial PDA
1 2 3 4 5 6	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2 3 4 5 6	Modular Equipment Type	Does not apply
1 2 3 4 5 6	Purpose / Application is for	Change in Identification
1 2 3 4 5 6	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2 3 4 5 6	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2 3 4 5 6	Grant Comments	Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, hotspot, and simultaneous transmission use conditions is 0.42W/kg, 1.18W/kg, 1.18W/kg and 1.31W/kg respectively.
1 2 3 4 5 6		Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, hotspot, and simultaneous transmission use conditions is 0.15W/kg, 0.06W/kg, 0.29W/kg and 1.31W/kg respectively.
1 2 3 4 5 6		Output power listed is conducted power.
1 2 3 4 5 6		Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory and simultaneous transmission use conditions is 0.04W/kg, 0.16W/kg and 1.31W/kg respectively.
1 2 3 4 5 6	Is there an equipment authorization waiver associated with this application?	No
1 2 3 4 5 6	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2 3 4 5 6	Firm Name	CCIC Southern Testing Co., Ltd
1 2 3 4 5 6	Name	Z****** S**
1 2 3 4 5 6	Telephone Number	86-07********
1 2 3 4 5 6	E-mail	z******@ccic-set.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	27		1711.5	1779.3	0.139	0.008 ppm	2M67W7D
1	2	27		1712.5	1752.5	0.139	0.01 ppm	4M48W7D
1	3	27		1712.5	1777.5	0.164	0.008 ppm	4M49G7D
1	4	27		1720	1745	0.148	0.01 ppm	17M9G7D
1	5	27		1720	1745	0.086	0.01 ppm	17M9W7D
1	6	27		1720	1770	0.104	0.008 ppm	17M9G7D
1	7	27		1720	1770	0.085	0.008 ppm	17M9W7D
1	8	24E		1850.2	1909.8	0.966	0.054 ppm	248KGXW
1	9	24E		1850.2	1909.8	0.298	0.092 ppm	243KG7W
1	1	24E		1852.4	1907.6	0.185	0.0099 ppm	4M13F9W
1	11	24E		1857.5	1902.5	0.144	0.005 ppm	13M4G7D
1	12	24E		1860	1900	0.134	0.005 ppm	17M9G7D
1	13	24E		1860	1900	0.111	0.005 ppm	17M9W7D
1	14	24E		1860	1905	0.144	0.003 ppm	17M9G7D
1	15	24E		1860	1905	0.115	0.003 ppm	17M9W7D
1	16	27		2503.5	2682.5	0.158	0.013 ppm	13M4W7D
1	17	27		2506	2680	0.186	0.013 ppm	17M8G7D
1	18	27		2506	2680	0.149	0.013 ppm	17M8W7D
1	19	27		2507.5	2562.5	0.14	0.029 ppm	13M4G7D
1	2	27		2510	2560	0.13	0.029 ppm	17M9G7D
1	21	27		2510	2560	0.166	0.029 ppm	17M9W7D
1	22	27		704	711	0.17	0.005 ppm	8M92G7D
1	23	27		704	711	0.131	0.005 ppm	8M91W7D
1	24	27		706.5	713.5	0.138	0.005 ppm	4M48G7D
1	25	27		709	711	0.137	0.005 ppm	8M91G7D
1	26	27		709	711	0.117	0.005 ppm	8M90W7D
1	27	22H		824.2	848.8	1.841	0.072 ppm	245KGXW
1	28	22H		824.2	848.8	0.364	0.069 ppm	244KG7W
1	29	22H		824.7	848.31	0.187	0.09 ppm	1M29F9W
1	3	22H		826.4	846.6	0.192	0.0093 ppm	4M12F9W
1	31	22H		829	844	0.189	0.004 ppm	8M91G7D
1	32	22H		829	844	0.14	0.004 ppm	8M90W7D
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15C	CC	2402	2480	0.0006
2	2	15C	CC	2412	2462	0.045
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
3	1	15C	CC	2402.00000000	2480.00000000	0.0058000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
4	1	15B	CC
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
5	1	15E	38 CC ND	5180	5240	0.019
5	2	15E	38 CC ND	5260	5320	0.019
5	3	15E	38 CC ND	5500	5700	0.019
5	4	15E	38 CC ND	5745	5825	0.019
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
6	1	15C	CC	13.56000000	13.56000000

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details