NOTE: The MT700s display is shipped with a transparent protection film that has been pasted onto the surface of touch panel of the MT700 for protecting the top cover and touch panel. Before using the MT700, tear out the protective film. If MT700 is provided with RFID reader, you will see the RFID reader logo front panel of MT700. DO NOT wipe the MT700 with any chemical cleansing agent! We recommend the usage of clean water or soft cloth for display panel/eyeglasses to clean the machine. on the The following sections describe the main components and features of the M700. Front View Touch Screen Camera Microphone LED Keypad RFID Finger Printer Side View Left Right Speaker 2 Speaker Lock Reset Bottom View Cable hole Front Main Board The Main board can be access via unlocking the right side lock of the MT700 and removing the back steel plate. 3 Back Terminal Board The terminal board can be access via unlocking the right side lock of the MT700 and removing the back steel plate. Magnetic Hall sensor Setting up the MT700 Connecting Power Connect power to the MT700 through the following instruction: Plug the Power Adapter Cable into the MT700s DC input jack and then connect the other end of the Power Adapter into an electrical outlet. Powering On the MT700 The MT700 automatically powers on when the Power Adapter plugs into an external power source. The MT700 welcome screen appears. Using the MT700 for the First Time Using the Touch-screen 1. Tap the screen to choose a menu option. 2. Double tap to open programs. 3. Use the Windows CE Keyboard to type letters or numbers into a data field or on a form. 4 Setting the Date and Time In the Date/Time Properties window, touch the screen to select the current date/time, time zone and daylight saving time option.
Tap the Left or Right arrows to scroll through the desired year and month, or directly tap the year or month to change the setting.
Tap on the Hr/Min/Sec AM/PM to input the Hr/Min/Sec to set the time.
Tap the arrow and set the correct time zone from the drop-down menu.
Check the box to enable Windows to automatically adjust for day-light saving time.
Tap Apply to save the settings and exit the Date/Time Properties dialog, or tap to exit without saving. Date Setting Time Setting Time Zone Setting Daylight Saving 5 Chapter 2 Basic Operation On-screen virtual Keyboard Windows CE features on-screen virtual keyboard that simulates all functions and behaviors of physical PC keyboard. To launch the on-screen virtual keyboard, please tap LargeKB. Entering Characters Entering alphabetic and numeric characters on the MT700 is the same as character input on a standard PC keyboard. Tap the onscreen button corresponding to the desired character. Keyboard Icon 6 Moving the Keyboard Tap the title bar and drag the keyboard to a desired location. Closing the Keyboard Tap the keyboard icon Hide Input Panel to close the Windows CE keyboard. RFID Reader (Optional) If the MT700 is with built-in RFID reader, you will see the RFID reader logo panel of MT700. The MT700 features a standard RFID reader, which is compatible with 13.56MHz MiFare cards. on the front RFID Card Verification The MT700 has built-in demo programs that allow RFID card verifications. 1. Double-tap the My Device icon on the Windows CE desktop. 2. Tap Windows. 3. Double-tap PDA_1.0 to open the demo program. 4. Set the COM Port: field at 2. Tap Connect. 5. Choose a card type to activate the demo test program. 7 6. Tap Auto and bring the RFID card close to the sensor. The code will display on the field below. 7. Tap Stop to end the reading. Audio Input/Output An audio demo program will test the audio input (recording) and output (playback). 1. Double tap My Device on the Windows CE desktop. 2. Double-tap Windows. 3. Double-tap wavtest to open the demo program. 4. Do one of the following:
-- Tap Rec to record the voice.
-- Tap Stop to finish recording.
-- Tap Play to listen to the recording. 8 Built-in Camera The MT700 has a built-in 2.0 megapixel camera which provides the following extra functionality:
Enables users to capture still pictures when a card is being read
Checks attendant time with a photo image
Records video continuously
Functions as an audio/video intercom Additionally, facial recognition can be incorporated using third party software. The MT700 has a demo program that enables users to capture a still picture with a card number and time stamp when a card is read. To start the camera demo:
1. Double-tap the My Device icon on the Windows CE desktop. 2. Double-tap the Windows folder. 3. Double-tap CameraDemo to open the program. The testing program is displayed. 4. Tap Preview Start. A continuous image is displayed enabling users to capture and playback video. 9 Tools/Utilities/Applications BootMode Path: Start Menu/Programs/Utilities/Boot Mode This tool allows you to perform warm boot or cold boot. Warm Boot 1. Select Start Menu -> Programs -> Utilities -> Bootmode 2. Tap Warm Boot. The system will be warm started. 10 Cold Boot Caution: Backup your data first!
1. Tap BootMode, and Tap Cold Boot. Then confirm the choice by selecting YES when program asked to reconfirm the command. 2. The terminal will be cold started. 3. Calibrate the screen according to the instruction displayed, and tap the screen anywhere again once the calibration is completed to continue. 4. Set the date and time, press OK. I/O Card Control Path: Start Menu/Programs/Utilities/IO Card This tool allows you enable or disable CF slot whenever it is necessary. Once you disable the slot, the card in that slot will not work until you enable the slot again. 1. Select Start Menu ->Programs -> Utilities -> IO Card 2. You may choose to enable or disable the card from this tool. Once you selected 11 disable, the card will no longer be detected unless it is enabled again. Tap Enable to enable the card. 3. Tap Hide to hide I/O Card Control window. 4. Tap Exit to exit I/O card control. The setting is kept after suspend and power on, however, after warm start/cold start, the setting will be resumed to default value (which is Enable) Registry Backup Path: Start Menu/Programs/Utilities/RegBackup This tool allows you to save the current registry or reset to factory default. 1. Select Start Menu -> Programs -> Utilities -> RegBackup. 2. Tap Save to save current registry settings. 3. Or tap Restore to reset registry to factory default. Terminal will be warm started.
(Note that Restore button is grey out if the registry setting was not saved before) 12 Func 9 Path: Start Menu/Programs/Utilities/Func9 This tool displays the general information of the terminal such as platform, firmware version, device ID etc. 1. Select Start Menu -> Programs -> Utilities -> Func9 2. Device information is shown as below:
Server Manager Path: Start Menu/Programs/Utilities/ServerManager Server Manager is a tool for the user to manager the NTLM (Windows NT LAN Manager) users, FTP users and telnet users. 1. Select Start Menu -> Programs -> Utilities -> Server Manager. 2. On NTLM tab, tap Add to add a new user. 13 3. Key in the user name and password. Tap OK. Add Success. Tap OK. 4. To modify a users password, select the user and tap Modify. 5. Enter the new password and confirm password. Tap OK. Change password success. Tap OK. 14 6. To delete a user, select the user you want to delete, tap Delete. 7. Tap Export. The user can backup SSID, WEP, all server users and this servers settings to \Flash Storage. 8. Tap Import to restore all settings. 15 9. Under Telnet tab, tap Add. Add the telnet user from NTLM. Select the user and tap Add. 10. Do you want to add user X to the telnet server? Tap Yes. 11. To delete telnet user, select the user and tap Delete. Do you want to delete the user X? Tap Yes 16 12. Under FTP tab, tap Add to add ftp user. 13. Select the user and tap Add. Do you want to add user X to FTP server User?
Tap Yes. 17 14. To delete ftp user, select the user and tap Delete. Do you want to delete the user X? Tap Yes. 15. Under Server settingtab, for telnet server setting, enable/disable server. 18 16. For FTP server setting, enable/disable server and define anonymous login. 17. Tap Set Login Directory. Define the login directory (Default is /Temp), tap Set. MifareDemo This feature allows you to make Mifare card verification. Path: /My Device/Windows/MifareDemo.exe 1. Double tap MifareDemo. 19 2. Under Key, select Connect to activate the program. 3. Tap Start Read and bring the Mifare card close to the sensor. The code will be read and displayed on the following field. 4. Tap Stop Read to end reading. CameraDemo This utility allows image capture and video streaming. Path: /My Device/Windows/CameraDemo.exe 1. Double tap CameraDemo. 2. Under Capture, select Capture Settings. Define image and video dimension and storage folder, then tap OK. 20 3. Under Capture, select Camera Settings. Define the pixel integration time. 4. Under Capture, select Flicker Detection. Select the frequency. 5. Under Preview, select Start. Your image will be focused. Under Capture, select image. 6. Under Preview, select Stop. Under Playback, select Open. Select the image file that was captured. 7. Tap Preview/Exit to close. 21 WavTest Path: /My Device/WavTest This tool is to test the audio recording and display. 1. Double tap WavTest. 2. Change to Stereo. Tap Rec. Talk near to the microphone port of MR650. 3. Tap Stop to stop recording. Tap Play to play the audio you just recorded. 4. Tap Save to save this audio as a wav file. 22 Screen Rotation Path: /My Device/Windows/ScrRotation.exe Screen Rotation allows the users to rotate the screen of terminal to the right, to the left or upside down. 1. Double tap ScrRotation.exe. 2. The screen rotation icon will appear on the taskbar. Tap the icon to select the option from the menu. 3. Tap Rotate Right. The screen is rotated to the right. 4. Tap Rotate Left. The screen is rotated to the left. 5. Tap Upside Down. The screen is flipped 180 vertically. 6. Tap About. The version of screen rotation is shown. 7. Tap Exit. Screen rotation icon is disappeared. 23 Calibration This tool allows you to do calibration while the original screen calibration is no longer accurate. Path:/My Device/Windows/Calibration.exe 1. Double tap Calibration. 2. Use the stylus to touch the + (Center, Top left, Bottom left, Bottom right, Top right), then press Enter key. 24 Net Path: My Device/Windows/Net.exe This is a MS Dos command that allows you to share data/files with any computer in the network. (Your terminal must connect to network) 1. On your PC/notebook, share a folder to the network. 2. Execute MS DOS prompt command. 3. On the DOS prompt, type the command:
Net Use //<PCs Name>/<Shared Folder Name> <Terminal folders name>
For Terminal folders name, you can specify any name you like. 4. In My Device, tap Network. You will see a terminal folder. 25 5. Open the folder. You will see the files in the folder. The content is the same as the shared folder in your PC/notebook. Windows CE Remote Management 1. Connect LAN cable to MR650. 2. Check IP address of MR650. 3. Input IP address of MR650 in the browsers address bar. 4.Enter admin as default password and verify the password again. 26 5.Please input Device Name you want and press Apply. 6. The Windows CE Remote Management Tool interface. Device Management Configure Network 27 7. Click Add/Del Users to Add/Delete users. You can add or delete any user, except Admin. After enter Add New, you can see your new user under Delete Users 8. ClickAdd/Del Network Adapter. Select the adapter and click Submit Query. 9. Click Add/Del Shares, define a name for the folder of terminal that you want to share. 10. Click Permission. Select Allow or Deny for the users access right. Click Update. Click Done. 11. On the browsers URL, enter \\<Device Name>\<folder name>. All the data of the shared folder of the device are shown and they are ready to be shared. 12. To remove any shared folder, click Remove. 28 Chapter 3 Data Communication The MT700 can link to a host computer for data communication via USB or Ethernet cables. USB and Ethernet port is on the front main board and is positioned as indicated in the diagram below. Ethernet USB USB Port Connect a USB cable to the MT700s USB host port, and connect the other end to a USB peripheral, such as a: Keyboard, mouse, memory card or HID compliant device. 29 Chapter 4 Power and Hardware The MT700 must work with external power. In this case, connect the MT700 to the AC outlet with the power adapter. Adjusting the Backlight Adjust the backlight screen settings through the following steps:
NOTE: The MT700 screen contrast has been preset by Unitech for optimum performance. 1. Tap Start Settings Control Panel double-tap Backlight to adjust the screen brightness. 2. The color displays backlight can be customized for the Battery Power and External Power conditions. Set the backlight behavior and drag the On Intensity and Dim Intensity sliders to the desired levels. Field Description Minutes until the backlight dims. Dim Backlight Turn Off Backlight Minutes until the backlight turns automatically off. Turn on Backlight The backlight turns on when a button is pressed, or the touch-screen is tapped. 30 Hardware Reset Reset To perform a hardware reset, press the Hardware Reset button with a stylus or a sharp object. Caution: If you perform the hardware reset, there is a possibility that the settings you have done will be lost!
Performing a Software Reset Perform a reset if the MT700 is frozen (i.e., the device no longer responds to pressing buttons on/or the touch-screen). Performing a Warm Boot A Warm Boot is used to reset or reboot the device without losing data stored in RAM memory. Perform a Warm Boot in any of the following situations:
The MT700 fails to respond.
After installing software applications.
After making changes to certain system settings (i.e. SD card). CAUTION! A Warm Start will erase all unsaved data. From Windows CE 1. Tap My Device Windows Boot. 2. Tap Warm Boot. 31 Performing a Cold Boot A Cold Boot will erase all added data and programs, but it will restore the device to the default factory settings. However, data and application programs stored in the Flash Storage will not be deleted. Always perform a Warm Boot before attempting to use a Cold Boot to correct a problem. Data previously synchronized to the computer can be restored. Perform a Cold Boot by using the BootMode utility in the operating system. Perform a cold boot in the following situations:
Reset the operating system. Restore the MT700 back to factory settings. Reset the MT700 after a boot loader, keyboard and kernel upgrade. CAUTION! A cold boot will erase all data and installed applications in RAM memory. Method 1: From Windows CE 1. Tap My Device Windows Boot. 2. Tap Cold Boot. Method 2: From Hardware Pull out the power cable and then plug the cable into the DC input jack to cold boot 32 Terminal Block The MT700 provides a 10-pin and a 12-pin terminal block plugs for input/output signals. With reference to the illustrative figures below, Insert the terminal block plugs into the terminal block sockets on the rear side of the MT700. 12 pin terminal block 10 pin terminal block Pin1 Pin1 10 pin Terminal Block Pin Assignment Pin Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 Name 12V GND WIEGAND1_D0 WIEGAND1_D1 GND 5V WIEGAND2_D0 WIEGAND2_D1 GND 5V N/A 12 pin Terminal Block Pin Assignment Pin Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 Pin 11 Pin 12 Name RL1NO RL1C RL1NC RL2NO RL2C RL2NC DI1-2 DI1-1 DI2-2 DI2-1 RS485+
RS485-
33 Appendix A System Specification CPU TI OMAP DM3730 with DSP 1GHz Processor Processor/Memory Memory SDRAM: 512 MB NAND Flash: 512 MB OS Button Display Microsoft Windows CE 6.0 Professional Plus 12 programmable numeric keys 7 inches color (1024 x 600) Pixels Backlight Touch-screen, TFT-LCD Communication Multimedia Programming SDK 1 X RJ45 with POE (DC12V/1A, IEEE802.3af Compliant) RS485 Support (Optional RS485+, RS485-) baud rate at 15200 bps or lower USB v2.0 Host Audio: Two 1 Watt speakers Microphone audio input ModBus SDK supporting Elfin utility Power Source External Power (DC12V/2A) Enclosure Weight 1618 g. Dimension 297.53mm (L) X 203.98mm (W) X 74.98mm(H) Environmental Storage temperature Operating temperature
-10oC ~ 50oC
-20oC ~ 60oC Relative Humidity 10% 95%
Certification CE, FCC, NCC, CB, BSMI and RoHS compliant Programming VoIP/V2oIP, Video Streaming EM+HID RFID Reader (Optional) MiFare 13.56MHz (ISO 14443A / ISO 14443-4B / ISO 15693 / NFC) Camera Storage Finger print 1:N performance module 1.3 megapixel CMOS camera Micro SD slot and support up to 4Gb 34 Appendix B Worldwide Support At unitech, we have a professional support team to answer your questions or any related technical issues. If the equipment problem occurs, you may contact our regional services representatives to get the quick response. We have six regional services centers, and choose your region to get our quick support and their contact information can be found in our websites provided as below. Region Web Site Global Operation Center http://www.ute.com Unitech Taiwan http://tw.ute.com Unitech Asia Pacific & Middle Unitech China Unitech Japan Unitech America Unitech Latin America http://apac.ute.com http://india.ute.com http://cn.ute.com http://jp.ute.com http://us.ute.com http://can.ute.com http://latin.ute.com Unitech Europe http://eu.ute.com 35