all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 2.44 MiB | March 05 2013 / October 05 2013 | |||
1 2 | Cover Letter(s) | March 05 2013 / October 05 2013 | ||||||
1 2 | Cover Letter(s) | March 05 2013 / October 05 2013 | ||||||
1 2 | Cover Letter(s) | March 05 2013 / October 05 2013 | ||||||
1 2 | External Photos | March 05 2013 / October 05 2013 | ||||||
1 2 | Internal Photos | March 05 2013 / October 05 2013 | ||||||
1 2 | ID Label/Location Info | March 05 2013 / October 05 2013 | ||||||
1 2 | RF Exposure Info | March 05 2013 / October 05 2013 | ||||||
1 2 | RF Exposure Info | March 05 2013 / October 05 2013 | ||||||
1 2 | RF Exposure Info | March 05 2013 / October 05 2013 | ||||||
1 2 | RF Exposure Info | March 05 2013 / October 05 2013 | ||||||
1 2 | RF Exposure Info | March 05 2013 / October 05 2013 | ||||||
1 2 | Test Setup Photos | March 05 2013 / October 05 2013 | ||||||
1 2 | Test Report | March 05 2013 / October 05 2013 | ||||||
1 2 | Test Report | March 05 2013 / October 05 2013 | ||||||
1 2 | Test Setup Photos | March 05 2013 / October 05 2013 | ||||||
1 2 | Test Report | March 05 2013 / October 05 2013 | ||||||
1 2 | Test Report | March 05 2013 / October 05 2013 |
1 2 | Users Manual | Users Manual | 2.44 MiB | March 05 2013 / October 05 2013 |
HT682 PDA Scanner
- HT682 -
Users Manual 400974G Version 0.1 Preface About This Manual This manual explains how to install, operate and maintain the HT682 PDA Scanner. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from the manufacturer. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech global website address: http:\\www.unitech-adc.com Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation. Other product names mentioned in this manual may be trademarks or Registered trademarks of their respective companies and are hereby acknowledged. Unitech is a member of Oracle Embedded Software Licensing Program. i Regulatory Compliance Statements FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, avoid direct contact to the transmitting antenna during transmitting. 3. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. FCC Label Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. ii RF Radiation Exposure Statement:
For body worn operation, this PDA has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Canadian Compliance Statement This Class B Digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du Canada. European Conformity Statement Declaration of Conformity with Regard to the R&TTE 1999/5/EC and EMC 89/336/ EEC directives. RoHS Statement This device conforms to RoHS (Reduction Of Hazardous Sub-stances) European Union regulations that set maximum concentration limits on hazardous materials used in electrical and electronic equipment. Taiwan NCC Warning Statement
(930322) iii Laser Information The Unitech HT682 series is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1. Class II and Class 2 products are not considered to be hazardous. The HT682 series contains internally a Visible Laser Diode (VLD) whose emissions do not exceed the maximum limits as set forth in the above regulations. The scanner is designed so that there is no human access to harmful laser light during normal operation, user maintenance or during prescribed service operations. The laser safety warning label required by the DHHS/IEC for the HT682 series' optional laser scanner module is located on the memory compartment cover, on the back of the unit. CAUTION! Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light. Use of optical instruments with the scanner will increase eye hazard. Optical instruments include binoculars, microscopes, and magnifying glasses. This does not include eyeglasses worn by the user. Battery Notices The HT682 is equipped with a Lithium-Ion battery pack and backup battery. Both batteries will discharge after an extended period of not being used. When both batteries are discharged, recharge the unit for 16 hours in order to fully charge the main battery and backup battery. Recharge the HT682 through the following:
1. Plug the USB charging cable to the HT682 and plug the 5V/3A AC-DC adapter to the power jack of the USB charging cable. 2. Place the HT682 into the docking station and plug the 5V/3A AC-DC adapter to the power jack of the docking station. If the main battery is removed, the backup battery ensures the data on SDRAM is safe for up to 6 hours. To prevent data loss, do not leave the HT682 uncharged with the main battery removed for an extended period. See First Time to Charge the Main Battery & Backup Battery on page 9 for more details. Note: Rechargeable batteries are advised to replace every year or when 500 charge/discharge cycles achieved to guarantee optimal performance. It is normal that the battery balloons or expands beyond one year or the maximum of 500 cycles. Although it does not cause harm, it cannot be used again and must be disposed of according to the location's safe battery disposal procedures. iv If the performance decrease is greater than 20% in a Lithium-Ion battery, the battery is at the end of its life cycle. Do not continue to use, and ensure the battery is disposed of properly. The length of time that a battery power lasts depends on the battery type and how the device is used. Conserve the battery life through the following:
Avoid frequent full discharges because this places additional strain on the battery. Several partial discharges with frequent recharges are better than a deep one. Recharging a partially charged lithium-Ion battery does not cause harm because there is no memory.
Keep the lithium-Ion battery cool. Avoid a hot car. For prolonged storage, keep the battery at a 40% charge level.
Do not leave the lithium-Ion battery discharged and unused for an extended period because the battery will wear out and the longevity of the battery will be at least shorter than half of the one with frequent recharges. Battery charge notice It is important to consider the environment temperature whenever the Lithium-Ion battery pack is charged. Charging is most efficient at normal room temperature or in a slightly cooler environment. It is essential that batteries are charged within the stated range of 10C to 45C. Charging batteries outside of the specified range could damage the batteries and shorten their charging life cycle. CAUTION! Do not charge batteries at a temperature lower than 0C, which will increase the internal resistance to cause heat and make the batteries unstable and unsafe. Please use a battery temperature detecting device for a charger to ensure a safe charging temperature range. Further, to protect and avoid battery from inflating, the battery is detected for thermal protection and will not be charged when the temperature of battery is over 50 degrees. Do not leave the terminal for a long time in the charging cradle and do not charge the battery with a cable long, which will shorten the battery life and cause battery expanding/ballooning. The unit should not be subject to very high temperature, excessive moisture, and direct heat. Avoid the battery from being fully charged and staying in a high temperature environment. Avoid terminal or spare battery from staying in a hot vehicle. For prolonging the storage time, keep the battery at a 40%
charge level. Lithium ion batteries oxidize least when they are stored at the state of 40% charge. v Storage and safety notice Although charged Lithium-Ion batteries may be left unused for several months, their capacity may be depleted due to build up of internal resistance. If this happens they will require recharging prior to use. Lithium-Ion batteries may be stored at temperatures between -20C to 60C, however they may deplete more rapidly at the higher temperature ranges. It is recommended to store batteries within normal room temperature ranges. Warranty The following items covered under Unitech Limited Warranty are free from defects during normal use:
HT682 1-year limited warranty.
Accessories limited warranty depending upon your local dealers definition Warranty becomes void if equipment is modified, improperly installed or used, dam-aged by accident or neglect, or if any parts are improperly installed or replaced by the user. Use only the adapter supplied. Using the wrong adapter may damage the unit and will void the warranty. vi Preface Table of Contents About This Manual .................................................................................................................... i Regulatory Compliance Statements.........................................................................................ii FCC Warning Statement ......................................................................................................ii FCC Label Statement...........................................................................................................ii Canadian Compliance Statement........................................................................................iii European Conformity Statement .........................................................................................iii RoHS Statement .................................................................................................................iii Taiwan NCC Warning Statement.........................................................................................iii Laser Information....................................................................................................................iv Battery Notices .......................................................................................................................iv Battery charge notice .......................................................................................................... v Storage and safety notice....................................................................................................vi Warranty .................................................................................................................................vi Chapter 1 Getting Started ......................................................................................................................... 1 Introducing the HT682 ............................................................................................................ 1 Notice ..................................................................................................................................... 1 Warranty ............................................................................................................................. 2 Regulatory........................................................................................................................... 2 HT682 Model Specification ..................................................................................................... 2 vii HT682 Accessories................................................................................................................. 2 Communication and Charging Cradle ................................................................................. 2 Communication and Charging Cable Kits ........................................................................... 3 Universal Adaptor................................................................................................................ 3 Holster................................................................................................................................. 3 Li-ion Battery Pack .............................................................................................................. 3 HT682 Product Introduction & Accessory Kit .......................................................................... 4 HT682 Front View ............................................................................................................... 5 HT682 Rear View................................................................................................................ 6 First Step with HT682.......................................................................................................... 7 Install the Battery Pack ....................................................................................................... 7 Switch On Backup Battery .................................................................................................. 8 Supply Power to the HT682 ................................................................................................ 8 First Time to Charge the Main Battery & Backup Battery.................................................... 9 Protective Screen Film ........................................................................................................ 9 First Time Use of the HT682 ............................................................................................... 9 Setting the Time Zone First ............................................................................................... 10 Setting Date/Time ............................................................................................................. 11 Chapter 2 Using the Keypad and Scanner............................................................................................. 12 Keypad ................................................................................................................................. 12 HT682 HotKey .................................................................................................................. 13 Software Keyboard (Windows CE Keyboard) ....................................................................... 13 Opening the Windows CE Keyboard................................................................................. 13 Other Character Support from WinCE Keyboard .............................................................. 14 viii Bar Code Scanner ................................................................................................................ 14 Chapter 3 Power system ......................................................................................................................... 15 Charging the Lithium-Ion Battery Pack ................................................................................. 15 Charging the Main and Backup Battery for the First Time................................................. 15 Environment Consideration for Charging .......................................................................... 15 Power Status Indication..................................................................................................... 16 Backup Battery Low Icon ................................................................................................ 16 Charging the Lithium-Ion Battery Pack ................................................................................. 16 Storage and Safety Precautions ........................................................................................... 17 Backlight Setting ................................................................................................................... 18 Warm Boot / Cold Boot ......................................................................................................... 18 Warm Boot ........................................................................................................................ 18 Warm Boot via Software.................................................................................................... 19 Warm Boot via Hardware .................................................................................................. 19 Cold Boot .......................................................................................................................... 19 Cold Boot via Software...................................................................................................... 20 Chapter 4 Data Communication ............................................................................................................. 21 Introduction........................................................................................................................... 21 Connecting ........................................................................................................................... 21 Serial or USB Cable .......................................................................................................... 21 Docking Station .................................................................................. !
RF Communication ........................................................................................................... 22 Using ActiveSync .............................................................................................................. 22 ix Installation............................................................................................................................. 23 Connecting the Device to Your Computer ......................................................................... 24 Changing Communications Settings..................................................................................... 25 WiFi Connection................................................................................................................ 26 Bluetooth Connection........................................................................................................ 29 Chapter 5 Useful Utilities ........................................................................................................................ 36 Introduction........................................................................................................................... 36 Scanner Setting ................................................................................................................ 36 Scan2Key.......................................................................................................................... 39 Chapter 6 Device Setting ........................................................................................................................ 40 Introduction........................................................................................................................... 40 Info .................................................................................................................................... 40 Funckey ............................................................................................................................ 41 IO ...................................................................................................................................... 41 Server ............................................................................................................................... 42 Virtual Key......................................................................................................................... 44 Screen............................................................................................................................... 45 Ping................................................................................................................................... 45 CPU .................................................................................................................................. 45 Backup .............................................................................................................................. 46 Battery............................................................................................................................... 46 Appendix Worldwide Support ................................................................................................................ 48 x xi Chapter 1 Getting Started Introducing the HT682 The HT682 is a rugged, compact and ergonomic handheld terminal powered by the WinCE. NET OS to enhance your work more efficient and profitable. It incorporates an integral barcode scanning 1D laser/ 2D imager device, color LCD with touch screen, keypad, BT and wireless communication interface capability. It provides the user with a standard Windows-based environment for customization and operation. The following HT682 Product Reference Guide provides simple step-by-step procedures to give you hands-on experience with your HT682. For programming your HT682, please refer to our SKD and programming manual. Notice 1. This unit is equipped with a battery pack and backup battery. It is possible that the Unitech HT682 may not be powered ON due to battery discharge as a result of storage. In the above situation and the first-time use, plug the HT682 to the charging cable or charging cradle (with 5V/2A AC-DC adapter), and charge the unused unit for over 16 hours in order to fully charge its backup battery as well. 2. Under normal condition, the back-up battery will be charged from external power or the main battery (if the main battery still has enough power to turn on). If it is charged for the first time, the back-up battery will be fully charged while main battery is charged fully. 1 Warranty Unitech's Limited Warranty provides for different warranty periods for different parts and accessories:
Terminal is covered by 1-year limit warranty.
Docking Station is covered by 1-year limit warranty.
Cable is covered by 1-year limit warranty.
Battery is covered by 6-month warranty. Regulatory Compliance with VCCI, CE, FCC, BSMI, UL, CCC HT682 Model Specification HT682 Accessories Each of the following items is sold separately to enhance your HT682 terminals capabilities. Communication and Charging Cradle USB Cradle is for data transmission and charging purpose. 2 Communication and Charging Cable Kits An included USB cable or an optional serial cable connects the HT682 terminal directly to a peripheral device for communication and a power source for charging. Universal Adaptor This power supplier adaptor plugs the terminal directly into a switch to power the terminal and charge the battery pack. This accessory converts the 120~240 Volts for different countries use. Holster The holster holds the terminal for mobile use. Li-ion Battery Pack The 3.7v, 2200mAh Li-ion rechargeable battery pack provides the main power supply for HT682 terminal. 3 HT682 Product Introduction & Accessory Kit HT682 Terminal Manual CD Communication Cable Adaptor Plugs Battery 4 HT682 Front View Touch Screen Display Function Power LED Indicator Trigger Alpha I/O Port Note: The LED indicators are defined as follows according to the colors of LED:
Green:
5 HT682 Rear View Bar Code Scanner Stylus Speaker Battery Cover 6 First Step with HT682 Before first using the HT682, please ensure the battery is fully charged. There are three ways to charge your HT682:
Docking Station
USB/Charging cable
Rechargeable Lithium-Ion battery pack NOTE: Data loss may occur if the HT682's backup battery is not adequately charged. Before charging the main battery, make sure the backup battery switch is ON. Install the Battery Pack 1. Remove the battery cover. 2. Move the backup battery switch to the ON position (see the description below). 3. Insert the battery pack so that the contacts on the battery pack line up with the contacts in the battery compartment. Fully seat the battery. 7 4. Cover the battery. Switch On Backup Battery Locate the backup battery switch inside the battery compartment on the left-hand side. Please ensure that it is in the ON position before charging the main battery. Supply Power to the HT682 Before using the power adapter, please follow the instruction made below to remove the O-ring from the socket of the adapter. 8 Then, Connect the USB/Charging Cable to the HT682 and connect the AC adapter to the cables power jack and an electrical outlet. To connect the USB cable to the terminal:
1. Hold the terminal face up;
2. Face the side of the connector with the smaller pillar up, as shown below; and 3. Connect. Or place the HT682 into the Docking Station (first connect the power supply to the Docking Station). First Time to Charge the Main Battery & Backup Battery We would like to propose to charge the battery at least up to 16 hours for the first time to use. While it normally only takes about 4 hours to charge the battery after it's been drained, when charging the battery for the first time please allow at least 16 hours. While charging the main battery the backup battery should also be charged. Please make sure the backup battery has been switched ON (this cannot be emphasized enough). CAUTION: There is a high risk of data loss from RAM if the backup battery is not fully charged. This can happen if the main battery has been drained and the unit is not connected to the AC adaptor. For this reason, it is crucial that the backup battery is switched on before charging the main battery for the first time. Protective Screen Film To protect screen, the HT682 has been provided with a protective plastic film. You may remove it (if required). The screen will be more susceptible to scratching without the film, but will be more readable. First Time Use of the HT682 Pressing the Power ON/OFF Key The Unitech HT682 welcome screen appears. The Windows CE screen will appear shortly thereafter. 9 Align the Screen When prompted, use the stylus to tap the targets as they appear in order to align the touch screen. When you complete the procedure, press any key or press anywhere on the touch screen to start up the WinCE system. Adjusting Screen Brightness To adjust the original default setting of the screen brightness, the backlight setting will be required. Please refer to page 20 for the new setting procedure. Setting Time Zone/ Date Before using the HT682 please take a few minutes to set the time and date so that data can be properly time-stamped. Setting the Time Zone First Follow the steps below to set up your time zone. 1. Tap the location arrow to see a list of cities. 2. Choose your location (or nearest listed one). 3. Select the Daylight Savings Time check box, if necessary. 4. Tap the Apply button. 10 If you would like the terminal automatically adjust clock for daylight saving, please tick on it. Setting Date/Time Tap the Left or Right arrows to scroll the year and month you desire. Or, directly tap location of year or month to change the year or month setting. To set up time, tap on the Hr/Min/Sec AM/PM to input the Hr/Min/Sec 11 Keypad Using the Keypad and Scanner Chapter 2 Data can be entered into the HT682 via its keypads, which includes: 0~9, alpha, function, escape, enter, scanner trigger, cursor, and on/off keys. Scan Key Escape Key Function Key Enter Key Cursor Key Power ON/OFF Key Alpha Key
[ENT] The Enter key confirms data entry.
[FUNC] The Function Key is used in conjunction with specific number keys to operate as Hotkeys (see next page).
[ESC] The escape key returns the user to a previous page.
[Cursor] The cursor key moves the cursor around the screen.
[Alpha] The Alpha key toggles Alpha mode on and off and Caps mode on and off. One press of the Alpha key causes the HT682's keys to input alpha characters, indicated by a blue LED light. A second press causes the input of upper-case characters, indicated now by a green LED. A third press returns the HT682 to numerical input. 12 HT682 HotKey The HT682 provides hotkeys for frequently used functions. Press the Function key and the appropriate numeric key for the following functions listed below:
Func 6 = Task Manager Func 7 = Scanner Setting Func 8 = Power Properties Func 9 = System Info Hotkeys can be modified to suit the user's preferences. To modify hotkeys, please follow the path below:
Path: My computer/Windows/RegFuncKey.exe Software Keyboard (Windows CE Keyboard) Besides its hardware keypad, the HT682 provides a touchscreen keyboard as an alternative method of character input. This software keyboard replicates the layout of a standard PC keyboard. Opening the Windows CE Keyboard The Windows CE keyboard can be opened by tapping the keyboard icon on the task bar.
(Refer to picture). 13 Other Character Support from WinCE Keyboard In addition to standard keyboard input, the HT682 supports special European character and symbol input. To enter these characters, tap the [] key on the touch screen keyboard to display the available characters. Bar Code Scanner The HT682 has an integrated 1D laser and 2D imager bar code scanner (depending on model number) capable of reading all major bar code labels. 14 Chapter 3 Power system Charging the Lithium-Ion Battery Pack The HT682's batteries can be charged via the USB or serial communication cable, or via the optional docking station - both using the included AC adaptor. Please charge the battery for at least 4 hours per session to ensure a full charge. Please note that the first time charge should be for at least 16 hours (see the description below). Charging the Main and Backup Battery for the First Time When first charging the HT682, please allow at least 16 hours to fully charge both the main and backup batteries. When the HT682 arrives from the factory the backup battery switch is in the OFF position in order to protect the backup battery. Before first charging the HT682, make sure the backup battery switch is moved to the ON position. The backup battery switch can be found inside the main battery compartment. Data loss can occur if the backup battery is not adequately charged - therefore it is imperative to ensure that the backup battery switch is in the ON position before charging for the first time. A properly charged backup battery can store data for up to 72 hours without power from the main battery. This is not recommended. Please make sure an adequately charged main battery or AC power is presented and try not to rely on the backup battery for other than unusual or emergency situations. To prevent data loss due to backup battery failure (always a slim possibility), please minimize the amount of time that the backup battery has to operate without the main battery pack installed or while disconnected from AC power. Environment Consideration for Charging It is important to consider the environment temperature whenever you are charging the Lithium-Ion battery pack. The process is most efficient at normal room temperature or slightly cooler. It is essential that you charge batteries within the stated range of -5C to 50C. Charging batteries outside of the specified range could damage the batteries and shorten their charging life cycle. 15 Power Status Indication When the "Main Batteries Very Low" icon appears, charging the main battery pack as soon as possible is highly recommended in order to avoid system shutdown at an awkward moment. Backup Battery Low Icon When the "Backup Battery Low" icon appears, it indicates that the backup battery is low and needs to be charged. Charging the Lithium-Ion Battery Pack Automatic shutdown of the HT682 The HT682 will enter idle mode when there is no task, or all tasks are waiting for input. In default setting, the HT682 will automatically turn itself off if it remains idle for 3 minutes and when there is no external charging power applied. Pressing the power button will return the HT682 to the same point at the time of automatic shutdown. Do not leave the terminal for a long time in the charging cradle and do not charge the battery with a cable long, which will shorten the battery life and cause battery expanding/ballooning. The unit should not be subject to very high temperature, excessive moisture, and direct heat. Avoid the battery from being fully charged and staying in a high temperature environment. Avoid terminal or spare battery from staying in a hot vehicle. For prolonging the storage time, keep the battery at a 40% charge level. Lithium ion batteries oxidize least when they are stored at the state of 40% charge. To save the battery power, it is better to turn off wireless mode. Please follow the steps below to turn off the wireless mode 16 Tap Setting Control Panel Device Setting to enter the Device Setting zone. Alternatively, Press Func key and 9 button to bring the Device Setting screen. Move to the IO tab and select Disable to disable the wireless mode. Storage and Safety Precautions Batteries should be stored in an open environment and placed where there is no risk of accidental shorting or other damage. Although charged Li-Ion batteries may be left unused for several months, their capacity may be reduced due to back up and internal resistance. If this happens they will require recharging prior to use. Li-Ion batteries may be stored at temperatures between -4F and 158F (-20C to 70C). 17 Backlight Setting The backlight for color display is user-defined. There are two tabs one for Battery Power and the other for External Power. Field Description Dim Backlight if Select how many minutes you want to elapse before the backlight dims. Turn Off Backlight if Select how many minutes you want to elapse before the backlight automatically turns off. Turn on Backlight Select this option if you want the backlight to turn on when the button is pressed or the touch screen is tapped. Warm Boot / Cold Boot Warm Boot Warm Boot is a reset to re-boot the HT682 without losing saved data. Perform a warm boot when:
The terminal fails to respond.
After installing some software applications
After making changes to certain system settings, such as network cards WARNING - Performing a Warm Boot will result in the loss of all unsaved data!
18 Warm Boot via Software Tap Start Programs Utilities BootMode. Tap Warm Boot. The system will be warm started. Warm Boot via Hardware Use a blunt pin (like an unfolded paper clip) to stab the warm-boot pinhole located on the front of the HT682, above the keypad. Cold Boot A Cold Boot is used to reset the operating system, restore the terminal back to factory default, and reset the terminal after a cold-boot pinhole bootloader, keyboard, or kernel upgrade. You are also allowed to stab the cold-boot pinhole to cold boot the HT682. warm-boot pinhole WARNING - Performing a Cold Boot will return the HT682 to its original factory settings!
19 Cold Boot via Software Tap Start Programs Utilities BootMode. Tap Cold Boot. The system is reset and you will lose all data including all files in the RAM memory. You will need to recalibrate the screen and reset the date and time. Cold Boot via Hardware 1. Remove the Main Battery. 2. Switch OFF the Backup Battery. 3. Switch the Backup Battery back ON. 4. Insert the Main Battery. 5. The terminal will be cold started and reset back to factory default. 6. Recalibrate the screen and reset the date and time. 20 Chapter 4 Data Communication Introduction The Unitech HT682 allows users to link to a host computer via RS-232 / USB, Bluetooth, or Wireless connection for data communication. This chapter provides an overview of the communication of the HT682. The following subchapters cover these topics:
Series or USB communication via cable or docking station RF Communication for details about wireless communication between the HT682 and host computers
Microsoft ActiveSync for details about serial communication via USB port Connecting Serial or USB Cable Plug the USB end of the HT682 communication cable into your PC's USB port, and the other end into the HT682's communication port. To simultaneously charge the HT682, plug the AC power adaptor into the power receptacle on the USB plug. 21 RF Communication Windows CE can support TCP/IP protocol and the user can link to the Internet via the settings under Network and Dial-up Connections. In the Network and Dial-up Connections, go to PRISM1 to set up the IP to connect to internet. Using ActiveSync Using Microsoft ActiveSync, you can synchronize and transfer information between your desktop computer and terminal. The most current version of ActiveSync can be downloaded from www.microsoft.com. Additional Capabilities With ActiveSync, you can also:
Back up and restore your device data.
Copy (rather than synchronize) files between your device and desktop computer.
Control when synchronization occurs by selecting a synchronization mode. For example, you can synchronize continually while connected to your desktop computer or only when you choose the synchronize command.
Select which information types are synchronized and control how much data is synchronized. For example, you can choose how many weeks of past appointments you want synchronized. 22 Before beginning installation, carefully read the following:
Because you will be restarting your computer during installation, save your work and quit all programs before you begin.
To set up your communication settings, the HT682 serial cable is required to connect the HT682 to your host computer.
If you run the Windows NT operating system with a service pack, you will be informed during setup that you may need to reinstall the service pack. Try connecting first, and if unsuccessful, reinstall the latest service pack. Requirements To synchronize, ActiveSync version 3.7 or higher must be installed on both your desktop computer and the HT682 terminal. The HT682 terminal is installed with ActiveSync and shipped. Therefore, you must install ActiveSync 3.7 on your desktop computer. To install ActiveSync on your desktop computer, please link to Microsoft website to get free download driver. Installation Follow the installation procedure below to install Microsoft ActiveSync, connect your HT682 to your desktop computer, and establish a partnership for synchronization, if required. In order to exchange data between your computer and the HT682, Microsoft ActiveSync must be installed on your computer. Use A USB cable that comes with your device or the docking station to connect the device to your computer. NOTE: If you have a previous version of the Microsoft ActiveSync installed in your computer, uninstall it first before installing the latest version of Microsoft ActiveSync. To install Microsoft ActiveSync on your computer:
1. Close any open programs, including those that run at startup, and disable any virus-scanning software. 2. Download the ActiveSync software from the Microsoft ActiveSync Download page at http://www.microsoft.com/downloads/details.aspx?Fami-lyID=7269173a-28bf-4cac-a682-5 8d3233efb4c&DisplayLang=en. 3. Browse to the location of the downloaded file, and double-click it. The installation wizard begins. 4. Follow the instructions on the screen to install Microsoft ActiveSync. 23 Connecting the Device to Your Computer 1. After ActiveSync has been installed, connect HT682 to your PC as described in Connecting the terminal to a host
(PC/Notebook) to a PC. 2. Turn the HT682 on. 3. ActiveSync starts automatically and configure the USB port to work with the HT682. The New Partnership setup wizard automatically starts. NOTE: If ActiveSync doesnt start automatically, click Start Programs Microsoft ActiveSync. NOTE: If a message appears indicating that it is unable to detect a connection, click the Cancel button and manually configure the communication settings. 4. Follow the on-screen instructions. 5. When the configuration process is complete, the Active-Sync window appears. 6. Synchronization will be initialized and will take place if youve chosen to synchronize periodically or upon connection. NOTE: Your computer can create a partnership with multiple HT682s. Also, a HT682 can create a partnership with up to two computers. 24 Changing Communications Settings If Microsoft ActiveSync fails to detect the HT682 during installation, set up communications manually instead. Make sure the following conditions are met:
Verify that the correct communications port is selected for your desktop computer and that it is free.
Microsoft ActiveSync uses the specified communication ports to connect to the HT682. Make sure these resources are available for Microsoft ActiveSync to connect to the HT682. Other programs cannot use them while the HT682 and your desktop computer are connected.
Set your baud rate on the HT682 - the desktop computer will match it. To check communications settings, open the Mobile Devices folder, and click File /
Connection Settings. The connection on the HT682 is set to USB connection by default. To adjust the connection, tap Start, Settings, Control Panel, select the Communication icon, select the PC Connection tab, and then tap the Change Connection button. For more information see Microsoft ActiveSync Help. 25 WiFi Connection Unitech terminals come with built-in RF facility, Summit or Marvel. A wireless network can be added either when the network access point is detected or by manually entering setting data. Before following these instructions, make sure if authentication information is needed. Here, you can use, for example, the Summit Client Utility tool to do or change the WiFi settings. Admin Login 1. Tap Start Programs SUMMIT scu. 2. To login as an administrator, tap Admin Login. 26 3. Enter the Admin Password.
(Default pass-word: SUMMIT Scan Available AP 1. Under Profile tab, tap Scan for available AP. 2. You may select a desired AP to create a new profile. Tap Configure. 27 3. Tap Yes to create the new profile. 4. Enter the WEP key or network key. Tap OK. Commit and Activate 1. Tap Commit to activate the setting. 28 2. Under Main tab, select the profile you want to activate. 3. A pop-up window appears A Power Cycle is required to make settings activate properly. Tap OK, and then tap OK to exit the Summit Client Utility. 4. Tap Start Programs Utilities Boot-Mode. Tap Warm Boot to warm start the terminal and load the previous settings. 5. The Summit icon on the taskbar indicating the AP is connected. Double tap this icon to bring up Summit Control Utility. Tap Disable Radio, you can disconnect the AP. Under Status tab, you can see the IP address, signal strength and quality. If you want to learn more detailed settings of the SUMMIT utility, please visite SUMMIT website
(http://www.summitdatacom.com/documentation.htm). Bluetooth Connection Your device is provided with Bluetooth wireless technology that you can use to synchronize information with a computer equipped with a Bluetooth adapter or access point. Bluetooth wireless technology allows you to communicate with the computer whenever it is within a range. You may use BTMAN, which will be described, to enable the Bluetooth module. 29 Using BTMAN to connect and pair a Bluetooth device After enabling the built-in Bluetooth module, you may use BTMAN to connect and pair a Bluetooth device around. BTMAN is a Bluetooth manager gathering and managing all Bluetooth profiles you add. Tap Start Programs Bluetooth BTMAN to open the manager. In the Service tab, six icons, About, Power OFF/ON, FTP, ActiveSync, are arranged. About: To show you the software version and BT module MAC address Power OFF/ON: To enable ON or OFF the BT module FTP: To transfer files to or receive files from a PC or terminal ActiveSync: To synchronize with a PC Power OFF/ON: To enable or disable paired Bluetooth earphones First of all, tap the Power OFF icon to enable the Bluetooth module. 30 Tap Yes to turn ON the Bluetooth module. Tap the Scan Device tab to scan Bluetooth devices around. Tap Scan Device. Scanned Bluetooth devices around are listed. Later, you may double tap a desired device and check Trusted and then Active. 31 ActiveSync Between HT682 and a PC or Terminal On the Scan Device tab, for example, select and double tap a desired PC. Tap Trusted. Tap Yes. Enter a PIN code on the terminal and tap OK. Then, an Enter PIN dialog box pops up and enter the PIN code same as that you inputted on the terminal. 32 Double tab the paired PC. When the pairing is successful, Trust and Active are checked. Move to the Service tab and tap ActiveSync. Tap Yes to launch ActiveSync. Then, HT682 will synchronize with the desired PC by means of Bluetooth. File Transfer Protocol (FTP) via Bluetooth You may use the FTP profile to transfer files to and receive files from a PC or terminal. Please follow the instruction below to connect and pair the PC or terminal for file transfer and receiving. On the Serve tab, tap the FTP icon. 33 The terminal is searching for PCs and terminals that are provided with the FTP function. Select a device and tap OK. An Authentication Request box pops up. Then, input a PIN code and tap OK. Choose a desired PC or terminal to or from which you want to transfer or receive data. Tap OK to confirm the connection. 34 Next, a dialog box pops up on the selected PC. Select and determine a path where a file or files may be transferred between HT682 and the PC. The FTP Service zone appears. All function icons in the zone are defined below. Shared Files List Refresh Upload Download End and Exit Move to upper directory Move to subdirectory 35 Chapter 5 Useful Utilities Introduction Unitech has been developing some of useful utilities for users application. The followings are Unitech Utilities introduction. Scanner Setting When it is necessary for the user to change the default barcode symbology for a different application, Scanner Control Panel provides the setting function to change default symbology, place delimiter characters behind scanned data, and save the settings. Run this program from
\Start\Setting\Control Panel\Scanner Setting.exe and Scanner Control Panel will be displayed. Barcode Symbologies Barcode Enable/
Char Check /
Symbology Disable Digit verification Transmit Leading Check Digit Others Char/digit Transmit Bookland YES EAN Codabar YES YES YES Code 11 YES Code 128 YES Code 32 YES Code 39 YES YES YES Transmit Start/Stop bits, CLSI format, *data length
* check digits,
*data length
*data length Transmit Tailing digit For ASCII, 36 Barcode Enable/
Char Check /
Symbology Disable Digit verification Transmit Leading Check Digit Others Char/digit Transmit Transmit Start/Stop bits, Function Code, Double label decoding,*data length, *double labels separator
*data length Transmit Code ID,
* Field separator
* Not suppress first or last digit,
*data length Fixed Length, *
Not suppress first or last digit, *data length
* Check digit double module 10,
* data length Fixed Length,
*Data Length
*Standard Character Set YES YES Zero Expension,NSC YES YES Supplement 2, Supplement 5,Insert Space 37 Code 93 YES Deta Code YES YES EAN 128 YES EAN 13 EAN 8 YES YES YES YES YES YES YES Interleaved YES YES YES 2 of 5 Label Code YES IV&V MSI/Plessey YES YES YES Interleaved YES YES YES 2 of 5 Telepen YES UPC A UPC E YES YES UPC/EAN Group Barcode Enable/
Char Check /
Symbology Disable Digit verification Transmit Leading Check Digit Others Char/digit Transmit Group GS1 YES Note: *Value Adjustable Scanner Control Pannel V3.0 before supplement, most have supplement,
*Add-on code try level Barcode Symbologies 2D Barcode Enable/
Char Check /
Symbology Disable Digit verification Transmit Leading Check Digit Others Char/digit Transmit Aztec YES Codablock F YES Code 49 YES Data Matrix YES EAN-UCC YES Composite MaxiCode YES MicroPDF417 YES OCR YES PDF-417 YES QR Code YES TLC-39 YES
(TCIF Linked Code 39) Runes, *data length
*data length
*data length
*data length UPC composite,
*data length
*data length
*data length OCR mode, OCR direction, Template, Group G, Group H, Check character
*data length Note: *Value Adjustable Scanner Control Panel Version 5.14 38 Scan2Key The Scan2Key application can route input from the scanner port to the keyboard buffer, with the result that all scanned data will be treated as if they were input from the keypad. With this router, scanned data can be directly input into generic applications like MS Pocket Word. Scan2Key can be found at:
\Start\Setting\Control Panel\Scanner\To kpd. 39 Chapter 6 Device Setting Introduction The Device Setting is a short cut for you to view device information and do settings, such as Function Key, I/O, Server and so on. The following description will guide you through completion of all device-setting items. 1. Left click Control Panel in My Device. 2. Double click Device Setting. Info Info tab shows general information of this terminal such as OS version, memory space, battery power, product ID and etc. 40 Funckey 1. Tap FuncKey tab. Four hot keys can be changed by the users. 2. Tap Func6. Tap Browse to select a file. Tap Set. 3. Press Func key and 6 key. Func6 will call the application that the users specified. 4. You can repeat the steps for Func7, Func8, and Func9. By default:
Func6 Task Manager Func7 Scanner Settings Func8 Power Properties IO 1. Tap IO tab. 2. Under status, select Enable or Disable. 41 3. When enable, SD/ Wireless card is always accessible; when disabled, SD/Wireless card is not accessible. Server Server Manager is a tool for the user to manager the NTLM (Windows NT LAN Manager) users, FTP users and telnet users. Account Manager NTLM 1. Tap Server tab. 2. Tap NTLM. Tap Add to add a new user. 3. Key in the user name and password. Tap OK. 4. To modify a users password, select the user and tap Modify. 5. Enter the new password and confirm password. Tap OK. 6. To delete a user, select the user you want to delete, tap Delete. 42 FTP 1. Under FTP tab, tap Add to add FTP user. 2. Select the user and tap Add. 3. To delete ftp user, select the user and tap Delete. You will see the dialog box Do you want to delete the user X? Tap Yes. Telnet 1. Under Telnet tab, tap Add. Add the telnet user from NTLM. 2. Select the user and tap Add. 3. To delete telnet user, select the user and tap Delete. You will see the dialog box Do you want to delete the user X? Tap Yes. Server Settings Option 1. Tap Option. For telnet server setting, enable/disable server. 43 2. For FTP server setting, enable/disable server and define anonymous login. Save Tap Save to save the server settings. Load Tap Load to load the saved server settings. Virtual Key This tool allows you to enable/disable the alpha keys on the terminals keypad, set auto enter and inter character delay. 1. Tap Virtual Key tab. 2. Check Enable Virtual Keys Applet. Tap Set. Tap OK. 3. Open MS WordPad and test alpha keys. Press alpha key and press numeric key. The characters output as alpha keys. 4. Uncheck Enable Virtual Keys Applet. Tap Set. Tap OK. 5. Press alpha key and press numeric key. The characters output as non-alpha keys. 6. In Virtual keys, enter the time delay for Delay To Send Key. Characters will be output in the speed as defined. 7. In Virtual keys, check Enable Auto Enter. 8. Define a value for Auto Enter Timeout. Tap Set. Tap OK. 9. In MS WordPad, turn to alpha mode. Press and hold a key. The alpha characters are highlighted in a loop. Release the key. The character, which was focused on will be printed after a period of time, according to the auto enter timeout defined. 10. Tap Load to load the previous setting. 44 Screen 1. Tap Rotate Right. Screen rotates to the right. 2. Tap Rotate Left. Screen rotates to the left. 3. Tap Upside Down. Screen rotates upside down. Ping This tool allows you to ping to other devices in LAN network while your terminal is connected to the network. 1. Tap Ping tab, on Host field, enter the IP address of the device you want to ping to. 2. Check Constant Ping so that your terminal will continuously ping to the remote device. 3. Tap Start. The terminal will search for the remote computer with the IP address, which you entered. If not found, you will see Request Time Out. If the remote computer is found, you will see Host Responding. CPU This allows you to select the speed of the CPU according to your requirement of the performance. Check Dynamic Speed Adjustment, or select a CPU speed, which will let the CPU speed change. 45 Backup This tool allows you to save the current registry or reset to factory default. 1. Tap Backup tab. 2. Tap Save to save current registry settings. 3. Or tap Restore to reset registry to factory default. The terminal will be warm started. (Note that Restore button is grey out if the registry setting was not saved before.) Battery This tool allows you to charge the battery in the Smart Charge mode as soon as the power of battery decreases to a level to which you drag. After changing the charge mode, you are required to warm boot the device. Whenever you charge the battery in the Smart Charge mode, turn ON the device. The default charge mode is Normal Charge. 46 47 Appendix Worldwide Support Unitechs professional support team is available to quickly answer questions or technical-related issues. Should an equipment problem occur, please contact the nearest Unitech regional service representative. For complete contact information please visit the Web sites listed below:
Region Web Site Global Operation Center http://www.ute.com Unitech Taiwan Unitech Asia Pacific & Middle East Greater China Division Unitech Japan Unitech America http://tw.ute.com http://apac.ute.com http://india.ute.com http://cn.ute.com http://jp.ute.com
http://us.ute.com ; http://can.ute.com Unitech Latin America http://latin.ute.com Unitech Europe http://eu.ute.com
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-05-10 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2013-05-10
|
||||
1 2 | Applicant's complete, legal business name |
Unitech Electronics Co., Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0023101058
|
||||
1 2 | Physical Address |
5F, No. 136, Lane 235, Pao-Chiao Rd.
|
||||
1 2 |
Hsin-Tien Dist., New Taipei City,, N/A
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
HLE
|
||||
1 2 | Equipment Product Code |
HT682BTN
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B******** C******
|
||||
1 2 | Telephone Number |
886-2********
|
||||
1 2 | Fax Number |
886-2********
|
||||
1 2 |
B******@tw.ute.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Neutron Engineering Inc.
|
||||
1 2 | Name |
K******** L******
|
||||
1 2 | Physical Address |
B1, No. 37, Lane 365, YangGang St.
|
||||
1 2 |
Taipei
|
|||||
1 2 |
Taiwan
|
|||||
1 2 | Telephone Number |
886-2********
|
||||
1 2 | Fax Number |
886-2********
|
||||
1 2 |
k******@neutron.com.tw
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
Neutron Engineering Inc.
|
||||
1 2 | Name |
K**** L******
|
||||
1 2 | Physical Address |
B1, No. 37, Lane 365, YangGang St.
|
||||
1 2 |
Taipei
|
|||||
1 2 |
Taiwan
|
|||||
1 2 | Telephone Number |
886-2********
|
||||
1 2 | Fax Number |
886-2********
|
||||
1 2 |
k******@neutron.com.tw
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | PDA Scanner | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power Output is conducted. SAR compliance for body worn operating conditions has been achieved with 0 mm separation between the device and the user's body and is limited to the specific configurations tested for this filing. End users must be informed of body worn requirements for satisfying RF Exposure compliance. Highest reported SAR value: 0.45 W/kg. | ||||
1 2 | Power output listed is conducted. End-users must be provided with operating instructions for satisfying RF exposure compliance. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
I****** C******
|
||||
1 2 | Telephone Number |
+886-******** Extension:
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
i******@newbtl.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.1240000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0056000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC