Rugged Handheld Computer
- PA720 -
User's Manual Version 1.2 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Revision History Date 20160726 20160817 20160829 Change Description first published version Modified 2.3, 2.4 Modified power source Version 1.0 1.1 1.2 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Preface About This Manual Thank you for purchasing the unitech product. This manual explains how to install, operate and maintain our product. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, such as photocopying, recording, or information storage and retrieval systems, without permission in writing from the manufacturer. The material in this manual is subject to change without notice. Regulatory Compliance Statements FCC Warning Statement This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. i 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure requirements, avoid direct contact to the transmitting antenna during transmitting. 3. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. Operation on the 5.15 - 5.25GHz frequency band is restricted to indoor use only. The FCC requires indoor use for the 5.15-5.25GHz band to reduce the potential for harmful interference to co-channel Mobile Satellite Systems. Therefore, it will only transmit on the 5.25-5.35 GHz, 5.47-5.725 GHz and 5.7255.850 GHz band when associated with an access point (AP). FCC Label Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. RF Radiation Exposure Statement For body contact during operation, this device has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Canadian Compliance Statement This Class B Digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du Canada. ii 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. European Conformity Statement unitech Electronics co., Ltd herewith declares that the unitech product is in compliance with the essential requirements and all other provisions of the R&TTE 1999/5/EC directive, the EMC 2004/108/EC directive and the Low Voltage 2006/95/EC directive. The declaration of conformity is available for download at :
https://portal.unitech.eu/public/Safetyregulatorystatement RoHS Statement This device conforms to RoHS (Restriction Of Hazardous Substances) European Union regulations that set maximum concentration limits on hazardous materials used in electrical and electronic equipment. Waste electrical and electronic equipment (WEEE) unitech has set up a policy and process to meet the EU directive 2002/96/EC and update 2003/108/EC concerning electronic waste disposal. For more detailed information of the electronic waste disposal of the products you have purchased from unitech directly or via unitechs resellers, you shall either contact your local supplier or visit us at :
https://portal.unitech.eu/public/WEEE iii 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Taiwan NCC Warning Statement
:
1. 2. 301022 1 3. SAR 2.0W/Kg 0.217 W/kg@10g iv 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Laser Information The unitech product is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1. Class II and Class 2 products are not considered to be hazardous. The unitech product contains internally a Visible Laser Diode (VLD) whose emissions do not exceed the maximum limits as set forth in the above regulations. The scanner is designed so that there is no human access to harmful laser light during normal operation, user maintenance or prescribed service operations. The laser safety warning label required by the DHHS/IEC for the unitech products optional laser scanner module is located on the memory compartment cover, on the back of the unit.
* Laser information only applies to the products with laser components. CAUTION! Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light. Use of optical instruments with the scanner, including binoculars, microscopes, and magnifying glasses, with will increase eye damage. This does not include eyeglasses worn by the user. LED Information The unitech product contains LED indicator(s) or LED ring whose luminance is not harmful to human eyes during normal operation, user maintenance or prescribed service operations.
*LED information only applies to the products with LED components. v 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Battery Notice 1. To guarantee optimal performance, it is recommended that rechargeable batteries be replaced every year, or after 500 charging cycles are completed. It is normal for the battery to balloon or expand after one year or 500 cycles. Although it does not cause damage, it cannot be used again and must be disposed of according to the location's safe battery disposal procedures. If a battery performance decreases more than 20%, the battery is at the end of its life cycle. Stop use and ensure the battery is disposed of properly. 2. 3. The length of time that a battery lasts depends on the battery type and how the device is used. Conserve the battery life by doing the following:
Avoid fully uncharging the battery because this places additional strain on it. Several partial uncharges with frequent charges are better than a fully uncharged battery. Charging a partially charged battery does not cause harm to the unit. Keep the battery cool. Avoid hot vehicles. For prolonged storage, keep the battery at a 40% charge level. Do not leave the battery uncharged and unused for an extended period of time, the battery will wear out and the longevity of the battery will be at least half of one with frequent charges. 4. Protect battery life by not over or under charging the battery. 5. Please do not leave battery unused for long time without charging it. Despite unitechs safety precautions, the battery pack may begin to change shape. If so, stop using it immediately. Please check to see if you are using a proper power adapter to charge the battery or contact your service provider for service. If you cannot charge the battery after it has been idle for an extended period of time and it begins to heat up, please do not try to charge it. It may not be functional anymore. 6. 7. Please only use the original battery from unitech. Using a third party battery can damage our products. Please note that when such damage occurs, it is not covered by unitechs warranty policy. vi 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. CAUTION!
RISK OF EXPLOSION IF BATTERY IS REPLACED INCORRECTLY. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Battery charge notice It is important to consider temperature when the battery pack is charging. Charging is most efficient at normal room temperature or in a slightly cooler environment. It is essential that batteries are charged within the stated range of 0C to 40C. Charging batteries outside of the specified range could damage the batteries and shorten their life cycle. CAUTION! Do not charge batteries at a temperature lower than 0C. This will and make the batteries unstable and dangerous. Please use a battery temperature detecting device for a charger to ensure a safe charging temperature range. Storage and safety notice Although charged batteries may be left unused for several months, their capacity may be depleted due to build up of internal resistance. If this happens, they will require recharging prior to use. Batteries may be stored at temperatures between -20C to 60C, however they may deplete more rapidly at higher temperatures. It is recommended to store batteries at room temperature.
* The message above only applies to the usage of the removable batteries. For the products with non-removable batteries / without batteries, please refer to the specification of each product. vii 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Product Operation and Storage Notice The unitech product has applicable operation and storage temperature conditions. Please follow the limitation of suggested temperature conditions to avoid failure, damage or malfunction.
*For applicable temperature conditions, please refer to the specification of each product. Adapter Notice 1. Please do not leave the power adapter in the socket when it is not connected to your unitech product for charging. 2. Please remove the power adapter when the battery is fully recharged. 3. The bundled power adapter that comes with your unitech product is not meant to be used outdoors. An adapter exposed to water or rain, or a very humid environment can cause damage to both the adapter and the product. 4. Please only use the bundled power adapter or same specification of adapter to charge your unitech product. Using the wrong power adapter can damage your unitech product.
* The message above only applies to the product connected to the adapter. For the products without using the adapters, please refer to the specification of each product. viii 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Hearing Damage Warning Zx.3 Warning The warning shall be placed on the equipment, or on the packaging, or in the instruction manual and shall consist of the following:
- the symbol of Figure 1 with a minimum height of 5 mm; and
- the following wording, or similar :
To prevent possible hearing damage, do not listen at high volume levels for long periods. Alternatively, the entire warning may be given through the equipment display during use, when the user is asked to acknowledge activation of the higher level. ix 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Worldwide Support unitechs professional support team is available to quickly answer questions or assist with technical-related issues. Should an equipment problem occur, please contact the nearest unitech regional service representative. For complete contact information please visit the Web sites listed below:
Taipei, Taiwan Headquarters Tel: +886-2-89121122 info@hq.ute.com E-mail:
Address: 5F, No. 136, Lane 235, Baoqiao Road, Xindian District, New Taipei City 231, Taiwan (R.O.C.) Website: http://www.ute.com China Tel: +86-59-2310-9966 info@cn.ute.com Room401C, 4F, RIHUA International Mansion, Xinfeng 3nd Road, Huoju Hi-tech District, Xiamen, Fujan , China http://cn.ute.com E-mail:
Address:
Website:
Asia & Pacific / Middle East Tel: +886-2-27911556 E-mail:
info@apac.ute.com info@india.ute.com info@mideast.ute.com Address: 4F., No. 236, ShinHu 2nd Rd., NeiHu Chiu, 114, Taipei,Taiwan Europe Tel: +31-13-4609292 info@eu.ute.com E-mail:
Address: Kapitein Hatterasstraat 19, 5015 BB, Tilburg, the Netherlands Website: http://eu.ute.com Japan E-mail:
Address:
Tel: +81-3-35232766 info@jp.ute.com Kayabacho Nagaoka Building 8F.,1-5-19 Shinkawa, Chuo-Ku, Tokyo, 104-0033, Japan http://jp.ute.com Website:
Latin America E-mail:
Address:
Tel: +52-55-5171-0528 info@latin.ute.com 17171 Park Row, Suite 210 Houston, TX 77084USA (Rep.) Website: http://latin.ute.com Website: http://apac.ute.com / http://mideast.ute.com North America Tel: +1-714-8916400 E-mail:
Address:
Website:
info@us.ute.com / info@can.ute.com 6182 Katella Ave, Cypress, CA 90630, USA http://us.ute.com Please scan QR Code to visit us :
2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. x Warranty Policy The following items covered under the unitech Limited Warranty are free from defects during normal use:
The warranty period is varied from each country. Please consult with your supplier or unitech local office for actual length of warranty period to your purchased product. Warranty becomes void if equipment is modified, improperly installed or used, damaged by accident or neglect, or if any parts are improperly installed or replaced by the user. 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. xi Table of Contents Preface.............................................................................................................i Regulatory Compliance Statements .............................................................. i Laser Information ......................................................................................... v LED Information ........................................................................................... v Battery Notice.............................................................................................. vi Adapter Notice............................................................................................viii Hearing Damage Warning ........................................................................... ix Worldwide Support ....................................................................................... x Warranty Policy ........................................................................................... xi Chapter 1 - Overview................................................................................1 1.1 Package .................................................................................................1 1.2 Product Detail.........................................................................................2 1.3 Specifications .........................................................................................5 1.4 Getting Started .......................................................................................8 Chapter 2 Installation & Operation.................................................14 2.1 Barcode Setting....................................................................................14 2.2 HF Setting ............................................................................................21 2.3 UHF Setting..........................................................................................22 2.4 MSR Setting .........................................................................................22 2.5 WWAN Setting......................................................................................23 2.6 WLAN Setting.......................................................................................25 2.7 PAN Setting ..........................................................................................27 2.8 GPS Setting..........................................................................................28 2.9 PC Setting ............................................................................................30 2.10 Camera Setting ..................................................................................31 2.11 Performing a Hardware Reset ............................................................34 2.12 Performing Factory data reset ............................................................35 2.13 Programmable Keys...........................................................................37 2.14 Battery Swap......................................................................................44 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. xii Chapter 3 Introduction to Applications.........................................45 3.1 Scan Service ........................................................................................45 3.2 File Manager ........................................................................................49 3.3 Update Center ......................................................................................51 3.4 Sound Recorder ...................................................................................52 3.5 Push to Talk..........................................................................................55 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. xiii PA720 Users Manual Chapter 1 - Overview 1.1 Package Please make sure the following contents are in the PA720 gift box. If something is missing or damaged, please contact your unitech representative. The standard package contents PA720 Terminal Battery Hand Strap Regulatory Compliance Statements Optional accessories Single Slot USB Cradle Single Slot Ethernet Cradle 4 slot Ethernet Cradle 4 slot Terminal Charger 4 slot battery Charger USB charging and communication cable cap Plugs + Power Adapter Stylus 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 1 1.2 Product Detail PA720 Front View PA720 Users Manual Receiver 5 megapixel camera Back button Camera button Microphone Home screen button Menu button 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2 PA720 Rear View PA720 Users Manual Barcode scanner window Flash LED 8 megapixel / Autofocus camera Reset button Battery cover Knobs Speaker Cable / Cradle connector 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 3 PA720 Left and Right View PA720 Users Manual Earphone Jack Volume up/down Scanner trigger button Power key Push to talk 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 4 1.3 Specifications PA720 Users Manual System Features CPU Memory OS Languages support MT8735 1.3GHz Qual Core ARM A53 64bit 3GB Mobile SDRAM 16GB eMMC / MLC Flash Android 5.1 Lollipop English, Simplified Chinese, Traditional Chinese, Japanese, Spanish, German, French and multiple languages 1 x Power key 2 x Volume key Display Gorilla Glass with 5-point capacitive touch panel 4.67" Color 450 cd/m2 Brightness 720x1280 dots Color Transmissive types TFT Keypad 4 x Function key 2 x Scan trigger button Indicator 1 x LED Indicator Vibrator Symbologies 1D 2D
(2D is only available when the 2D imager is on your device ) 1 x Push To Talk key All major codes PDF417 MicroPDF417 Code 128 Emulation Data Matrix Data Matrix Inverse Decode Mirror Images (Data Matrix Only) Maxicode QR Code QR Inverse MicroQR Aztec Aztec Inverse Han Xin Han Xin Inverse 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 5 Engines 1D 2D PA720 Users Manual SE655 :
Illumination/AIMER : LED 630 30 nm Optical Resolution : 5 mil (minimum readable bar code module size) Scan Repetition Rate : Nominally 50 scans/second Print Contrast : 20% (minimum print contrast) Ambient Light Immunity Light Source: 4845(lux) 5%
SE4750SR ( LASER AIMER ) :
Sensor Resolution: 1280 x 960 pixels Field of View: Horizontal: 48, Vertical: 36.7 Aiming : 655 nm Laser Illumination Element: 2 x Warm white LED Minimum Bar Code Print Contrast : 20%
Ambient Light: Max 107,639 lux (direct sunlight) Audio Speaker , 3.5mm Audio Jack, Receiver, Microphone Regulatory Approvals CE, RoHS compliance, FCC, NCC, VCCI, TELEC, CCC, SRRC Communication USB WLAN PAN WWAN USB 2.0 IEEE 802.11 a/b/g/n Bluetooth 4.1 RFID/HF GSM/GPRS/EDGE 850/900/1800/1900 MHz UMTS 850/900/1900/2100 MHz LTE FDD Band 1/2/3/5/7/8/20 TDD Band 38/39/40/41 DL: 150Mbps/ UL: 50Mbps Frequency: 13.56MHz Tag Support: ISO15693, ISO14443A , ISO14443B Support NFC 12 x 12 mm patch antenna GPS(Optional,availableonWWAN version) Camera and Flash Light 8MP CMOS sensor rear autofocus camera with LED flash light 5MP front camera 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 6 PA720 Users Manual External Storage Support MicroSD memory card up to 32GB Other Sensors G-sensor , Light + Proximity sensor , E-Compass Power Source Standard Battery Enclosure Weight 3120mAh / 3.6V, full charge should over 95% capacity No Engine Standard Battery: 277gDouble Battery: 307g 1D Engine Standard Battery: 297gDouble Battery: 327g 2D Engine Standard Battery: 307gDouble Battery: 337g 1D: Approximately 171.3mm (L) x 25.6mm (H) x 80mm (W)
(Antenna length included) 2D: Approximately 171.3mm (L) x 29.3mm (H) x 80mm (W)
(Antenna length included)
-4F to 131F (-20C to 55C)
-22F to 140F (-30C to 60C) 32F to 113F (0C to 45C) 95% ( non-condensing ) 1.2 meter IP65 MIL-STD-810G, 514.4 process II Dimension Environmental Operating temperature Storage temperature Charging Temperature Relative Humidity Drop test to Concrete Environmental Sealing Vibration and Shock test Software Android 5.1 API level 22 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 7 1.4 Getting Started 1.4.1 Installing the Battery 1. To loosen the two knobs on the battery cover by turning counterclockwise. And pull the two knobs up to remove the battery cover. 2. Slide and position the battery pack, making sure the battery contacts are aligned with the contacts in the compartment. 3. Use your thumb to snap the battery in place. 4. Put back the battery cover. PA720 Users Manual knobs Battery Compartment Contacts Plastic Tab 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 8 5. To tighten the two knobs on the battery cover by turning clockwise. PA720 Users Manual NOTE: After installing the battery, make sure the battery cover is securely closed, or you may be unable to turn ON the terminal. WARNING! There is a risk of fire and burns if the battery pack is handled improperly. DO NOT disassemble, crush, puncture, short external contacts, or dispose the battery pack in fire or water. DO NOT attempt to open or service the battery pack. Dispose of used batteries according to local recycling guidelines in your area. 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 9 PA720 Users Manual 1.4.2 Charging the Battery Before using the terminal for the first time, you need to charge it for about 24 hours. After that, you can charge the terminal for 4 hours to recharge the battery to full capacity. Charge the terminal using the USB charging cable or the docking station. 1. After PA720 is connected to the charging cable, push up the release buttons on the both sides of the USB charging cable to lock PA720. 2. Use USB charging cable to connect the AC adapter. 3. Plug the AC adapter cord into an electrical outlet. 1 Release Buttons Push up : Lock Push down: Unlock 3 2 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 10 PA720 Users Manual 1.4.3 Turning on the terminal for the first time After you have initially charged your device for about 24 hours, the device is ready to be used. You can now start up your device. You can then set up the languages, WiFi setting, and date and time. Power-On Button Turn ON your device by pressing the power button on the right side of the terminal. 1.4.4 Checking the LED status Terminal Status Scan Message Power LED Description Green light blinks once Successful reading Blue light blinks Message received Being charged Solid Red light Solid Green light Fully charged Checking the Battery Status If the battery level becomes low in the course of normal use, a status icon appears on the device screen indicating low or very low battery status. In both cases, connect PC with USB to back up your data, and then recharge your device as soon as possible. 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 11 PA720 Users Manual 1.4.5 Using the SD/SIM Card The PA720 has SD/SIM card slots inside the battery compartment. Inserting a SD/SIM Card 1. To loosen the two knobs on the battery cover by turning counterclockwise. And pull the two knobs up to remove the battery cover. 2. Remove the battery cover and the main battery. 3. Now you can access the SD card slot and SIM card slot. Put the battery back into the battery cover. 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 12 4. Replace the battery cover. To tighten the two knobs on the battery cover by turning clockwise. PA720 Users Manual Removing the SD/SIM Card 1. To loosen the two knobs on the battery cover by turning counterclockwise. 2. Remove the battery cover and the main battery. 3. Press the card in and release. The card pops out. 4. Remove the card from the slot. 5. Put the battery back into the battery cover. 6. Replace the battery cover. 7. To tighten the two knobs on the battery cover by turning clockwise. CAUTION! Before installing the SIM card, please backup your data to prevent data loss because of a low battery. 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 13 PA720 Users Manual Chapter 2 Installation &
Operation 2.1 Barcode Setting 1. Tap go to APPS, and tap ScanService. 14 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA720 Users Manual 2. You are now enter the ScanService application:
There are three items appear on the screen : Settings, Test and Version. Settings Tap the default barcode symbologies for a different application Tap On / Off to enable / disable to work in background Tap Exit to leave ScanService 15 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. For Save / Load Settings, and Factory Default section, Please tap and then tap Save / Load Settings. PA720 Users Manual To save settings, please tap Save Settings -- OK 16 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. The save setting data is stored in File Manager. (Please see 3.2 File Manager ) PA720 Users Manual 17 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Test Scanned data information Tap Clear :
Clear all scanned data PA720 Users Manual 2 1 Tap Save to file. Choose the path and filename to save the scanned data. 18 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA720 Users Manual Touch and hold anywhere inside the yellow line area until the pop up screen shows up. To update ScanService, please tap Update to get the latest version. Version The recent version of ScanService 19 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. More Options PA720 Users Manual For more options and settings, please tap
. 20 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2.2 HF Setting PA720 Users Manual 1. Tap go to APPS, and tap Settings. 2. Tap More and you will find NFC, and tap to enable / disable NFC. 21 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2.3 UHF Setting Current model is not available. 2.4 MSR Setting Current model is not available. PA720 Users Manual 22 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2.5 WWAN Setting PA720 Users Manual 1. Turn off the terminal to insert the SIM card. Note : For the instruction, please refer to 1.4.5 Using the Micro SD/SIM Card. It only applies to the device which supports WWAN. 2. Turn on the terminal, 4G signal will show at the top of the screen. 2.5.1 Mobile network settings 1. Tap go to APPS, and tap Settings. 23 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2. Go to Wireless & networks, Tap More, and tap Cellular networks. PA720 Users Manual 3. You can have more Cellular network settings in this section. For network type, please tap Preferred network type. 24 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2.6 WLAN Setting PA720 Users Manual 1. Tap go to APPS, and tap Settings. 2. Go to Wireless & networks, Tap Wi-Fi 25 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA720 Users Manual 3. To see available networks, turn Wi-Fi ON. And tap to choose the available networks. 4. Choose the available networks, and enter the Password and tap Connect. 26 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2.7 PAN Setting PA720 Users Manual 1. Tap go to APPS, and tap Settings. 2. Go to Wireless & networks, Tap Bluetooth (PAN) Tap ON / OFF to enable / disable Bluetooth (PAN). To pair the available device, turn Bluetooth ON to choose the available device. 27 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2.8 GPS Setting PA720 Users Manual 1. Tap go to APPS, and tap Settings. 2. Go to PERSONAL , Tap Location. 28 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 3. Tap ON/OFF for the permission to use your location information. PA720 Users Manual 4. Tap Mode for more location mode settings. High accuracy :
Use GPS, Wi-Fi and cellular networks to determine location Battery saving :
Use Wi-Fi and cellular networks to determine location Device only :
Use GPS to determine your location 29 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2.9 PC Setting PA720 Users Manual 1. Connect the USB charging cable to the USB port of the PC device. Release Buttons Push up : Lock Push down: Unlock 2. After connecting the terminal to PC with USB, you can find a removable storage on my computer. 30 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2.10 Camera Setting PA720 Users Manual 1. Tap go to APPS, and tap Camera. Or use the camera button as below :
31 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA720 Users Manual 2. The following are the introduction of the camera interface. Swipe left / right for other options Multi angle view mode Panorama mode Motion Track mode Live photo mode Normal mode Slow motion HDR Flash Mode Camera switch Record / Camera Settings 32 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 3. More options / settings camera filter effects ( for normal mode only ) PA720 Users Manual Swipe left / right for other filter effects for More settings as below. Tab Main settings Camera settings Video Setting 33 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2.11 Performing a Hardware Reset PA720 Users Manual You may have to perform a reset if the device freezes (i.e., the terminal no longer responds to the buttons or tapping on the screen). 1. Use a pin, a paper clip, or tip of a pen. 2. Lightly press the reset button located on the back side of PA720. Reset button 3. The terminal will restart the system after you press the reset button. 34 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2.12 Performing Factory data reset PA720 Users Manual 1. Tap go to APPS, and tap Settings. 2. Go to PERSONAL , tap Backup & reset 3. Go to PERSONAL DATA, tap Factory data reset 35 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 4. Tap Reset phone and then tap ERASE EVERYTHING PA720 Users Manual 36 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA720 Users Manual 2.13 Programmable Keys The PA720s keys can be programmed for users to be able to perform different functions or applications. 2.13.1 Programming a key 1. Tap go to APPS, and tap Settings. 37 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA720 Users Manual 2. Go to SYSTEM, Tap Programmable keys, and select the keys to remap.
(ex. tab Push toTalk ) 3. Tab one of KEYCODES or APPS that lists the available functions or applications and select one shortcut to map to the key.
(ex. tab VOLUME_UP ) 38 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 4. The key is successfully mapped to a key code. PA720 Users Manual 2.13.2 Enable/ Disable wakeup After the key is mapped to a key code, check the Enable wakeup checkbox to wake PA720 by pressing the programmable keys when PA720 is in sleep mode. Note: This function only applies to KEYCODES. 39 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA720 Users Manual 2.13.3 Export / Import a Programmable Key Configuration file Export file 1. Tab 2. Select Export 3. Tab OK Programmable keys exported successfully 40 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA720 Users Manual The Programmable Key configuration can be exported to a text file or imported into PA720. Note: The configuration file (keys_config.txt) is saved in File Manger.
(For File Manager setting, please refer to 3.2 File Manager ) 41 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Import file PA720 Users Manual Before importing the file, please make sure the configuration file
(keys_config.txt) is in File Manager. 1. Tab 2. Select Import 3. Tab Ok Programmable keys imported successfully The new configuration will be applied immediately after import. 42 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Reset default 1. Tab 2. Select Reset to default PA720 Users Manual 43 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2.14 Battery Swap PA720 Users Manual Please follow the steps for the battery swap. 1. Long press power botton until you see the pop up window and tap Batt swap. 2. The LED indicator will start showing solid red light. Please swap the battery after the LED red light goes off. Make sure do not turn on PA720 during the battery swap. 3. When the battery swap is done, you can press the power button to restart PA720. Note :Please see 1.4.1 Installing the Battery for more information. 44 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA720 Users Manual Chapter 3 Introduction to Applications 3.1 Scan Service 1. Tap go to APPS, and tap ScanService. Note : For more Scan Service settings, please refer to 2.1 Barcode Setting. 45 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 2. You are now enter the ScanService application. Tap Test to start scanning barcodes. PA720 Users Manual 3. Aim the Barcode Scan Engine to the barcode and press one of two scan trigger buttons. Barcode Scan Engine Scanner trigger button 46 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. PA720 Users Manual 4. After scanning the barcodes, the screen will show the barcode information. Scanned data information Tap Clear :
Clear all scanned data 2 1 Tap Save to file. Choose the path and filename to save the scanned data. 47 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. More Options PA720 Users Manual For more options and settings, please tap
. Auto Scan Scan2Key Setting Device Option Save/ Load Update Settings 48 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 3.2 File Manager PA720 Users Manual 1. Tap go to APPS, and tap File Manager. 2.
: File categories
: Search
: Refresh
: View as grid /
Add folder /
Add to bookmark /
Settings /
Manage bookmark 49 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 3.2.1 Solutions Folder PA720 Users Manual Tap Internal Storage; tap Solutions on the drop down menu. Note: The solutions folder is subject to change on different sub-release of OS. 50 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 3.3 Update Center PA720 Users Manual 1. Tap go to APPS, and tap Update Center. 2. To update or check the latest version of software and applications, you will need to do it manually. Refresh 51 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 3.4 Sound Recorder PA720 Users Manual 1. Tap go to APPS, and tap Sound Recorder. 2. Recording : Tap red dot to start the sound recording. Record Button Pause Stop 52 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 3. Save files : Tap stop button during the sound recording and choose save. PA720 Users Manual Tap to the recording file list. Save Button 4. Delete files : Tap Recording file list to the recording file list and long press the file you choose to remove. Tap file. and press OK to delete the 53 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 5. More settings : Tap for Voice quality / Recording mode. PA720 Users Manual Voice quality Recording mode 54 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 3.5 Push to Talk PA720 Users Manual To operate push to talk, please go to Google Play store the walkie talkie apps which can support any android device. For example, Zello PTT Walkie Talkie is the most recommended walkie talkie app. to download Push to Talk 55 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.