URC9700 CSV Oa trea Manual Bluetooth Pairing Mode Volume Lock To Unlock Volume MUG9700-SDL User Manual TV Brand Setup TW: STB:
Powers your TV Powers ON and ON and Off OFF your set top box GUIDE:
Displays EXIT programme Exits current guide menu and returns to current HOME: programme Takes you to your content home screen VOICE:
Activates VOLUME:
Controls and mutes TV volume voice search functionality using microphone at tap of remote TRANSPORT:
Controls DVR programming SEARCH:
Activates search functionality
(IR assisted pairing) Hold Play/Pause + Digit 0 until Feedback LED starts blinking Feedback LED will stop blinking to confirm pairing a. If Pairing is unsuccessful, hold OK/SELECT and EXIT until LED blinks and press digits 9- 6-6 b. Repeat Steps 1 and 2 Press and hold OK/SELECT and EXIT until the feedback LED
& blinks twice.
+. [ee
= x2 Blinks Press Volume Up key cS Audio Device Brand Setup Enter Corresponding Device Digit to lock Volume to Device Digit STB Q TV 1 Audio 2 The feedback LED will blink twice T x2 Blinks Complete Press and hold OK/SELECT and EXIT until the feedback LED blinks twice.
=i
= x2 Blinks Press Volume Up key ci The feedback LED will display four blinks to indicate that the volume has now been unlocked
= x4 Blinks Complete Turn ON the TV that you wish to setup Find your device brand in the Brand Set / Simple Set table below. Note the number that corresponds to your device brand TV Brand Digit LG Panasonic Philips, Magnavox RCA Samsung Sanyo Sharp Sony Toshiba VIZIO SC|/E/al/N|/al/alAlaln|=
Press and hold OK/SELECT and EXIT until the feedback LED blinks twice
= x2 Blinks Press the OK/SELECT key once, feedback LED blinks once 21 Blink Direct Code Entry for TVs Press digit key 1. While pointing the remote at the TV, press and hold the number key for your brand that you noted in step 2. Release the key as soon as the device turns OFF. LED will go OFF and will blink
(ON-OFF) during every code transmitted. a= | (s=][e=]
Zea) [ae] [oer v4 Press the Power key on the remote control to turn your device back ON. If this does not work for your device, Proceed to Direct Code Entry steps. Turn ON the device that you wish to setup Find your device brand in the Brand Set / Simple Set table below. Note the number that corresponds to your device brand Audio Brand Digit Bose Denon LG Onkyo Panasonic
: Philips Pioneer Samsung Sony O|/Ol/al/N|/a}/alaloln|=
Yamaha Direct Code Entry for Audio Devices Press and hold OK/SELECT and Exit until the feedback LED blinks twice
= x2 Blinks Press the OK/SELECT key once, feedback LED blinks once 1 Blink Press digit key 2. While pointing the remote at the Audio Device, press and hold the number key for your brand that you noted in step 2. Release the key as soon as the device turns OFF. LED will go OFF and will blink
(ON-OFF) during every code transmitted.
|LI| O Aza a=] ([5=] (=) zr) [a=] [o=) Getting Started remote control to turn your device back ON. 7 Press the Power key on the Done. If this does not work for your device, Proceed to Direct Code Entry steps. fo) Turn ON the TV Refer to Code List for the brand setup code for the device you would like to control (SEE REVERSE SIDE OF THIS MANUAL}
Press and hold OK/SELECT and EXIT until the feedback LED blinks twice A
= x2 Blinks Press digit key 1 Enter the 4 digit device code. The feedback LED will blink twice to indicate successful programming x2 Blinks Press the Power key on the remote control If your TV turns off process is complete, if TV does not turn off repeat steps 2 - 7 using the next code in the Chart Turn ON the Audio Device Refer to Code List for the brand setup code for the device you would like to control (SEE REVERSE SIDE OF THIS MANUAL) Press and hold OK/SELECT and EXIT until the feedback LED blinks twice aed
= x2 Blinks Press digit key 2. Enter the 4 digit device code. The feedback LED will blink twice to indicate successful programming x2 Blinks a=] [5=] [em]
Press the Power key on the remote control If your Audio Device turns off process is complete, if Device does not turn off repeat steps 2-7 using the next code in the Chart FCC Statement This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions
(1) This device may not cause harmtul interference, and (2) this device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged or try to correct the interference by one or more of the following measures:
+ Reorient or relocate the receiving antenna
+ Increase or decrease the separation between the equipment and receiver
+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
+ Consult the dealer or an experienced remote control/
TV technician for help.
+ Itis strongly recommended that the TV be plugged into a separate wall outlet This equipnent has been verified to comply with the limits for a Class B computing device, pursuant to FCC Rules, The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's, authority to operate this equipment Industry Canada Statement For Industry Canada Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR. d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.