Scepter 11x17 Manual2ab.fm Page 1 Wednesday, October 14, 2009 2:54 PM FUNCTION KEY CHART FUNCTION KEY CHART 1. Remove the battery TV Power compartment cover on the TV Power back of your remote control. Press once to turn on or off your TV. Press once to turn on or off your TV. 2. Locate the two (2) enclosed Pointer AA batteries. Pointer 3. Match the + and - marks This key is used to start or stop the pointing This key is used to start or stop the pointing with those in the battery function on the remote control. Press at any time to function on the remote control. Press at any time to case, then insert them. park the pointer so motion does not make the park the pointer so motion does not make the pointer move. 4. Replace the battery pointer move. compartment cover. GUIDE GUIDE 5. If batteries are not inserted Displays the on-screen program guide. correctly, the remote LED Displays the on-screen program guide. under the iO key will not DVR DVR light when keys are pressed. Displays the list of programs that you have Displays the list of programs that you have NOTE: When batteries need recorded. recorded. replacement, the IO key LED will BACK BACK blink 3 times upon each key-press. Returns to the previous screen. Also used in day/
Returns to the previous screen. Also used in day/
CONTROLLING THE CABLE time navigation in the on-screen program guide. time navigation in the on-screen program guide. SET-TOP BOX FWD FWD Brings you forward in screen navigation. Also used Brings you forward in screen navigation. Also used In order to control the cable set-
in day/time navigation in the on-screen program in day/time navigation in the on-screen program top box with the Cablevision guide. guide. Scepter remote control, you need INFO INFO to insert the USB dongle that comes with the remote into an Displays the current channel and program Displays the current channel and program available USB port on the set-top information. information. box. Once the dongle is inserted VOL+/-
VOL+/-
Used to raise and to lower the audio volume. Used to raise and to lower the audio volume. iO(Logo) IO(Logo) Displays the iO applications menu. Displays the IO applications menu. MUTE MUTE Press once to turn sound off, press again to turn Press once to turn sound off, press again to turn sound back on. sound back on. FAV FAV Use to cycle through your favorite channels stored Use to cycle through your favorite channels stored on your cable set-top box. on your cable set-top box. LAST LAST Press to toggle between the channel that was last Press to toggle between the channel that was last tuned. tuned. USER/*
USER/*
This function is reserved for future use. This function is reserved for future use. A-Sorts the guide by time B-Sorts the guide by theme C-Sorts the guide by title STB POWER STB POWER Press once to turn on or off your cable set-top box. Press once to turn on or off your cable set-top box A, B, C, D A, B, C, D These keys are used to perform various on-screen These functions are used for interactive functions. applications or to sort your on-screen program guide:
SETTINGS Displays the cable box settings menu. Navigation/SEL Use the Cursor keys to move the cursor in the SETTINGS program guide and menu screens and to navigate within the interactive service. Displays the cable box settings menu. Use SEL to select options, PPV events, and to
Navigation/SEL tune to programs from the program guide. Use SEL as a means to select items and Use the Cursor keys to move the cursor in the
content when POINTING or to drag and drop program guide and menu screens and to navigate items and content when POINTING. within the interactive service. Use SEL to select options, PPV events, and to
HELP tune to programs from the program guide. Use SEL as a means to select items and Reserved for future use.
content when POINTING or to drag and drop PAGE UP items and content when POINTING. Press to move one page up in the program guide PAGE UP and menus. Press to move one page up in the program guide PAGE DOWN and menus. Press to move one page down in the program PAGE DOWN guide and menus. Press to move one page down in the program EXIT guide and menus. Used to directly exit menus, guides, and EXIT applications. Used to directly exit menus, guides, and CH +/-
applications. Press to select the next higher (or lower) channel. CH +/-
Transport Keys Press to select the next higher (or lower) channel. These keys are used to control playback of DVR or HELP On Demand content. Used to trigger on-screen help tips. 1-0 Keys Transport Keys Use the keypad numbers (1-9, and 0) to directly tune channels (e.g., 09). These keys are used to control playback of DVR or On Demand content. ASPECT/#
1-0 Keys Press to change the picture size on your STB. Use the keypad numbers (1-9, and 0) to directly tune channels (e.g., 09). ASPECT/#
Press to change the aspect ratio (4:3 or 16:9) on your STB. 5. 4. 3. Match the + and - marks with those in the battery case, then insert them. Replace the battery compartment cover. If batteries are not inserted correctly, the remote LED under the iO key will not light when keys are pressed. NOTE: When batteries need replacement, the iO key LED blinks 3 times upon each key-press. CONTROLLING THE CABLE SET-TOP BOX In order to control the cable set-top box with the Cablevision Scepter remote control, you need to insert the USB dongle that comes with the remote into an available USB port on the set-top box. Once the dongle is inserted and batteries are installed in the remote control, then the remote should automatically be ready to control the set-top box with any key-press. POINTING OPERATION The Cablevision Scepter remote control has a unique feature that enables movement of the remote control to guide an on-screen pointer for applications that support the pointing feature. To enable the pointer on the remote, press the POINTER key located on the top end of the remote control. When the remote is in POINTER mode, there is a green LED that blinks to light up the POINTER key about once per second. While this key is lit, you can move the on-
screen pointer (for supported applications) to navigate and select on-screen content. Much like a PC mouse, the pointer allows content to be selected with a click of the SEL key or to be dragged from one location to another by holding the key down and releasing the key to drop an item being dragged to a new folder or location. Cablevision Scepter Remote Control User's Guide Universal Electronics, Inc. M4501 Rev A WWW.URCSUPPORT.COM/CABLEVISION INSTALLING BATTERIES 1. 2. Remove the battery compartment cover on the back of your remote control. Locate the two (2) enclosed AA batteries. PROGRAMMING THE REMOTE FOR TV CONTROL The Scepter universal remote control comes pre-programmed to operate the set-top box that is supplied by Cablevision. In addition, Scepter can be programmed to control basic functions of TV POWER, VOLUME+/-, and MUTE on a TV. 1. 2. 3. Turn on the TV that you wish to control Press and hold SEL and MUTE simultaneously until the iO key blinks twice. Using the list of Setup Codes for Televisions on the back of this sheet, find the brand name for the TV that you wish to control. Enter the first five-
digit code for your brand of TV. If performed correctly, the iO key blinks twice. NOTE: If the iO key emits one long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again. 4. Aim the remote control at the TV and press MUTE to see if the TV responds. If the TV responds to MUTE, try VOLUME +/- and TV POWER to ensure all functions work as expected. If the TV does not respond to these keys, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try SEARCHING FOR A TV CODE. Record your TV Code here:
PROGRAMMING THE REMOTE FOR AUDIO DEVICE CONTROL If you use an audio device such as an Amplifier to control the volume in your home theater, you may program the Scepter remote control for control of the audio device using the follow step. NOTE: Setting up an audio device automatically makes that device the default for VOLUME +/- and MUTE functions on the Scepter remote control. 1. 2. 3. Turn on the Audio Device that you wish to control Press and hold SEL and MUTE simultaneously until the iO key blinks twice. Using the list of AUDIO DEVICE CODES on the back of this sheet, find the audio device type and brand name that you wish to control. Enter the first five-digit code for brand of audio device. If performed correctly, the iO key blinks twice. NOTE: If the iO key emits one long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again. 4. Aim the remote control at the audio device and press MUTE to see if the audio device responds. If the device responds to MUTE, try VOLUME +/- to ensure all volume-related functions work as expected. If the device does note respond to these keys, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try SEARCHING FOR AN AUDIO DEVICE CODE. Record your audio Code here:
SEARCHING FOR A TV CODE If the five-digit codes for your brand do not work for your TV, follow the instructions below to search through all possible TV Codes. 7. 6. 3. 2. 1. 4. 5. Turn on the TV that you wish to control. Press and hold SEL and MUTE simultaneously until the iO key blinks twice. Enter 9 9 1. The iO key blinks twice. Press the 0 key once to set the remote for TV code search. Aim the remote control at the TV and press VOL + once to begin the automated code search. Keep the remote control pointed at your TV as the remote proceeds with testing TV codes. As soon as you see your TV turn off, press the VOL +
button again to stop the search process. Press and hold SEL for 3 seconds until the iO key blinks twice to save the code that caused the TV to respond. Test the TV POWER and volume controls (if you use TV for volume) to make sure that the remote is programmed as expected. SEARCHING FOR AN AUDIO DEVICE CODE If the five-digit codes for your brand do not work for your TV, follow the instructions below to search through all possible TV Codes. 8. 1. 2. 3. 4. 5. Turn on the Audio Device that you wish to control. Press and hold SEL and MUTE simultaneously until the iO key blinks twice. Enter 9 9 1. The iO key blinks twice. Press the 2 key once to set the remote for AUDIO DEVICE code search. Aim the remote control at the audio device and press VOL +
once to begin the automated code search. TROUBLESHOOTING PROBLEM: iO key does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA Alkaline batteries (See INSTALLING BATTERIES). PROBLEM: iO key blinks when you press a key, but home entertainment device does not respond. SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are within 15 feet of the device you are trying to control. PROBLEM: The remote control does not control home entertainment devices or commands are not performing properly. SOLUTION: Try all listed codes for the device type and brand. Make sure all devices can be operated with an infrared remote control. PROBLEM: The remote does not control the cable set-top box SOLUTION: Make sure that the USB dongle that came with the remote is fully inserted into an open USB port on the cable set-top box. If this does not work, check iO key for blinking upon key-press. If the key does not blink, change the batteries. 6. 7. 8. Keep the remote control pointed at your audio device as the remote proceeds with testing audio device codes. As soon as you see your audio device turn off, press the VOL + button again to stop the search process. Press and hold SEL for 3 seconds until the iO key blinks twice to save the code that caused the audio device to respond. Test the volume controls with your audio device to make sure that the remote is programmed as expected. TO FIND THE DEVICE CODES SET IN CODE SEARCH If you used SEARCHING FOR A CODE for either a TV or audio device, you can find out which code was saved to control your device by using the following steps:
1. 2. 3. 4. For example, to find out which code is operating your TV:
Press and hold SEL and MUTE simultaneously until the iO key blinks twice. Enter 9 9 0 0 to find the TV code or enter 9 9 0 2 to find the audio device code. The iO key blinks twice. To view the code for the first digit, press 1 once. Count the number of times the iO key blinks (e.g., 3 blinks = 3) and write down the number in the left-most box for that device type on this page. NOTE: If a code digit is 0, the selected mode key will not blink. 5. Repeat step 4 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, 4 for the fourth digit, and 5 for the fifth digit. Finish writing down the code in the device code boxes on this page. USING THE CABLE STB FOR VOLUME CONTROL If you want to use the cable set-top box to control the volume in your home theater, you may program the Scepter remote control to do so using the follow steps:
1. 2. Press and hold SEL and VOL-
keys simultaneously until the iO key blinks twice. The volume functions are now controlled by the cable STB. To change volume control back to the TV or Audio Device:
1. Press and hold SEL and VOL+
keys simultaneously until the iO key blinks twice. The volume functions are now controlled by the TV (or Audio Device if one is programmed in the remote control). 2. Scepter 11x17 Manual2ab.fm Page 2 Wednesday, October 14, 2009 2:54 PM TV CODES Setup Codes for Televisions Action Admiral Advent 00873 00093, 00463 00761, 00783, 00817 00891 00092 01916 00812, 01675, 00030, 00672, 01207, 01676, 02232 00030, 01365, 01590, 02087 01623 00156, 00748, 00765, 00890, 01217 01531, 01738 00451, 00092, 00710, 00802, 00846, 00875 00171 00556 01032, 01212, 01315, 01562 00463 01309 01283 00030 00030 00054, 00170 00000 00765 00765 00060, 00030, 00092 02314, 02345, 02347 01447, 00047 Aftron Aiko Aiwa Akai AOC Aomni Apex Digital Astar Audiovox Aventura Barco BenQ Broksonic Byd:sign Cadia Candle Carnivale Carver Celebrity Celera Changhong Citizen Coby Commercial Solutions Crosley Curtis Mathes Cytron Daewoo 00000, 00054 00047, 00054, 00451, 00093, 00060, 00030, 00145, 01147, 01347 01326 00451, 00092, 00634, 00672 01080, 01403 Dell Denon 00145 Digital Lifestyles 01765 00017 Dumont 00463, 00178, Durabrand 00171, 01034, 01595 01463, 01780, 01785 00000 Electroband Dynex Electrograph Electrohome Element Emerson Emprex Encross Envision Epson ESA FlexVision Fujitsu Funai Gateway GE GFM Gibralter GoldStar 01755, 01623 00463 01687, 02183 01864, 00017, 00451, 00463, 00178, 00171, 01595 01422, 01546, 01765 00876 00030, 00813, 01365, 02087 01290 00812, 00171, 01595 00710 00809, 00683, 00853 00000, 00171 01755, 01001, 01002, 01756 01447, 00047, 00051, 00451, 00178, 01347 00171 00017, 00030 00178, 00030, 00037 00683 01034, 01748 00178 01348, 01745 Hisense Hitachi Grundig Haier Hallmark Hannspree Harman/Kardon 00054 01206 Harsper 00093 Havermy Helios 00865 Hello Kitty 00451 Hewlett Packard 01494, 01088, 01089, 01101 00748, 01314 01643, 00145, 00797, 01037, 01484, 01576, 01854 01494, 01088, 01089, 01101 00849, 01219, 01294 01746 01286, 01603, 01684 00054 01603 01423, 01564, 00171, 01204, 01326, 01517, 01641, 01780, 01892 00017 00054 00000 Infinity Initial Insignia Inteq JBL JCB I-Inc iLo Hyundai HP LXI Loewe Marantz Jensen JVC MAG Magnavox Matsushita Maxent KDS Kenwood KLH Kost Kreisen KTV LG 00761, 00817 00463, 00053, 00371, 00650, 00731, 02118 01687 00030 00765 01262, 01483 00876 00030 01423, 00017, 01265, 00178, 00823, 00856, 01721, 01768, 01842 00512, 00633, 01884 00047, 00054, 00156, 00178 01687 01454, 01866, 00054, 00051, 00030, 00706, 00035, 00780, 00802, 01198, 01254, 01365, 01525 01454, 00054, 00030, 00704, 01398 00250, 00650 01755, 01211, 01714, 01757 00178, 00145 00463, 00150, 00178, 01037 00150, 00178, 00030 00047, 00017, 00051 01603 01250, 00093, 00150, 00178, 00108, 00512, 00836, 01522 00093, 00835 00835 00060, 00030 00156, 00178, 00037, 00866 00030, 00170, 00704, 01398, 01704, 01797 01755 NetTV Nexus Electronics02183 Nikko Motorola Moxell MTC NAD 00178, 00030, 00092 00748, 00824, 01089, 01365, 01590, 01591 Norwood Micro 01286, 01296 NTC Mintek Mitsubishi Megatron Memorex Midland Norcent 00092 MGA NEC NuVision Olevia Olympus Optimus Optoma Optonica Orion Panasonic PARK Penney Petters Philco Philips Pilot Pioneer Planar Polaroid Portland Prima Prism Proscan Proton Protron Proview Pulsar Puneet Pye Quasar RadioShack 01657, 02158 01610, 01144, 01240, 01331 01342 00250, 00650 01348, 02161 00093 00463, 01463, 00443, 02005 00250, 01480, 01457, 00051, 00650, 01290, 01291, 01310, 01636, 01650 01376, 02104 00047, 00156, 00051, 00060, 00178, 00030, 01347 01523 00054, 00030, 00171 01454, 01866, 00054, 00037, 00512, 00556, 00605, 00639, 00690, 01483, 01495, 01506, 01744, 01806 00030 01457, 00679, 00866, 01260, 01398 01496 01523, 00765, 02120, 02063, 01769, 01767, 01766, 01687, 01341, 01328, 01327, 01326, 01316, 01314, 01286, 01276, 01262, 00865 00451, 00092 00761, 00783, 00817, 01785 00051 01447, 00047, 00030, 01347, 02147, 02256 00178 01320 00835, 01687 00017 01546 00412 00250, 00051, 00650 00047, 00178, 00030 RCA Realistic Reoc RevolutionHD Runco Sampo Samsung Sansui Sanyo Sceptre Scotch Scott Sears Sharp Sheng Chia Sherwood Signet Sole Sony Soundesign Sova Soyo Spectroniq Squareview SunBrite Superscan Supersonic Supreme SVA Sylvania Symphonic Syntax Tandy 01447, 00047, 00051, 00093, 00090, 00679, 01147, 01347, 01781 00178, 00030 00714 01623 00017, 00030, 01398, 01629 01755, 00030 00812, 00060, 00178, 00030, 02097, 02094, 02051, 01630, 01619, 01575, 01458, 01395, 01312, 01249, 01235, 00814, 00766, 00650, 00618 00463, 00171, 00371, 01409 00054, 00088, 00208, 01142, 01649 00878, 01217, 01360, 01599 00178 00178, 01711 00047, 00054, 00156, 00178, 00171 00818, 00093, 01393, 01659 00093 01399 01262 01483, 01623 00000, 01317, 01651, 01685, 01791, 01825 00178 01320 01546, 01746, 01826 01687 00171 02337 00093, 00864 01189 00000 00748, 00865, 00870 01864, 00054, 00030, 00171, 01314 00171, 01595 01610, 01144, 01240, 01331 00093 Tatung Thomson TMK TNCi Toshiba Teac Technics Techwood Teco Teknika 01101, 01286, 01287, 01288, 01361, 01756 01248 00250, 00051 00051 01040 00054, 00150, 00060, 00092 00625 00178 00017 01524, 00156, 01265, 00060, 00035, 00508, 00618, 00650, 00845, 01343, 01508, 01704 01723, 02066 TruTech 00463 TVS US Logic 01286 Vector Research 00030 00053 Victor Vidikron 00054, 01398, 01629 00178 01755, 00797, 00857, 00864, 00885, 01330, 01342, 01578, 01627, 01742, 02087 01207, 01684, 02104 01336 02142 01758, 00864, 00885, 01499, 01756 00054, 00178, 00030, 00866 00156 00451, 00885, 00889, 00890, 01282, 01577 00463 Waycon Westinghouse Visart Vistron Vizio Vidtech Viewsonic Wards Viore White Westinghouse Wyse Yamaha Zenith 01365 00030, 00797 00000, 01423, 00047, 00017, 00463, 01265, 00178, 00030, 00145, 00092, 00037 Setup Codes for TV/DVD Combos 01675, 02232 Akai Coby 02347 01864 Emerson 01423 LG 01866 Magnavox Maxent 01714 Polaroid Proscan Sharp Sylvania Toshiba TruTech Viore 01523, 01766, 01769 02256 00818 01864 01524 02066 02104 AUDIO DEVICE CODES Setup Codes for Audio Amplifiers 20577 Adcom 20674 Bose 20300 Curtis Mathes Denon 20272 Harman/Kardon 20892 Left Coast 20892 21408 Logitech 20892 Marantz 20300 Optimus Philips 20892 20300 Pioneer 20892 Polk Audio RCA 20300 Setup Codes for Audio Receivers Aiwa 21405, 20121, 21089 21390 Alco 21077 AMC 21609 Anam 21189, 21212 Arcam 21212 Audio Control 21189 Audiotronic Audiovox 21390 Bang & Olufsen 20799 Bose Carver Coby Criterion Daewoo Denon 21229, 21629, 21933 21189, 20121, 21089 21389 21420 21250 21360, 21104, 21434, 22857 21801 20463 Fisher Garrard Harman/Kardon 20110, 21304, Hitachi Insignia Integra JBL JVC Kenwood 21306 21801 21077 20135, 21320, 21805 20110, 21306 20074, 21374, 21495, 21676 21313, 21569, 20186, 21027 Wards Yamaha Zenith 20014 20176, 20186, 20712, 21276, 21331, 21375, 21815, 21949, 22061 21293 Setup Codes for Audio Accessories Aiwa Apple Sony Yamaha 20159 21115 20159 22116 WWW.URCSUPPORT.COM/CABLEVISION FCC NOTICE This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving
antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment. DEVICES TESTED FOR FCC APPROVAL:
Cablevision Scepter Freespace Remote Control Model: URC-4501BJ0-R Remote FCC ID: MG34501-R UEI Freespace USB Dongle Model: URC-4501BJ0-R-B Dongle FCC ID: MG34501-R-B KLH LG Magnavox Marantz McIntosh Micromega Musicmagic Myryad NAD Nakamichi Nikko Niro Norcent Nova Onkyo Optimus Panasonic Philips Pioneer Polk Audio Proscan RCA Samsung Sansui Sanyo Sharp Sherwood Sony Stereophonics Sunfire Teac Technics Techwood Thorens Toshiba Venturer Victor 21390 21293, 22197 21189, 21269, 21089 21189, 21269, 21089, 21289 21289 21189 21089 21189 20320 21313 20609 21634 21389 21389 20135, 20842, 21320, 21805 21023, 20186 21308, 21518, 21316, 21763, 21779, 22452, 22967 21189, 21269, 21089, 21266, 21673, 21831 21023, 20014, 21123, 21284, 21459, 21623, 21823 21289 21254 21023, 21609, 21254, 21123, 21154, 21390, 21459 21295, 21304, 21581, 21868, 22137 21089 21801 20186, 20653 20653, 21077 21759, 21441, 21622, 21112, 21158, 21454, 21558, 21658, 21722, 21758, 21822, 21858, 21882, 22172, 22522 21023 21313 20463, 21390 21308, 21518, 21309 20609 21189 21123, 21572 21390 20074