SHENZHEN UNIEVERSAL THROUGH TECHNOLOGY CO.LTD Wireless car charger holder T144 FCC ID:2ARPF-T144 User Manual Wireless car charger holder Packing list 1. Wireless car charger holder 1pcs 2. 3. USB Cable 1pcs User Manual 1pcs 4. Waranty Card User Guidance Precautions 1. Please read the user manual carefully before use, this product must be used as required otherwise it may lead to fire, explosion or other dangers. 2. This product is 10W fast charge , the power adapter must compatible with QC2.0 or QC3.0 quick charge, otherwise the output power would be 5W automatically. 3. Ensure there is nothing on the charger's surface before use. Instructions 1. Fix the Wireless car charger holder on a car. 2. Place a phone into the wireless car charger, it will be clamped tightly due to the phones gravity and it will start charging. The phone shows the Charging statues 3. Easy and convenient. The three clamps of the wireless car charger can close and open automatically when a phone put in and taken out 4.There is a universal turning ball at the back of the charger, it can provide user any view-
direction requirements. 5. Safe and reliable. It will automatically cut off when the phone is fully charged or the temperature is higher than 60 degrees. This function is to prevent overcharging and protect the battery. Technical Specifications Product NameWireless car charger holder Input5V/9V Output5V1A Charging Efficiency75%
Frequency: 125KHz Coil: Double coils SIZE: 9.5cm*12.5 cm Color: Dark gray, brown red, sky blue Application: Compatitble with all the 4-6inch screen phones Operating Temperature-1040 Humidity4580%RE Warranty terms Please read the following items to ensure valid warranty serive. 1. Please fill the warranty card in details and shows before repairing. 2. Make sure the contents are true, otherwise it will be invalid. 3. Free repair service is available for charger or cable for the functional defects during the 1 year warranty period. Damages to the product caused by the following situations are not covered in the warranty services. 1. Do not follow the user manual. 2. Damages caused by accident or man-made factors 3. Products have been repaired by informal channels. 4. Appearance damages such as abrasions, scratches and deforms etc. It will be charged if the product over the warranty period. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.