FCC ID: 2AUI4-U05-1701 FACE RECOGNITION TERMINAL

FACE RECOGNITION TERMINAL FACE RECOGNITION TERMINAL CE Caution Use the Product in the environment with the temperature Between 10 and 40; Otherwise, it may damage your product. Products can only be used below 2000m altitude For the following equipment:

Product Name: FACE RECOGNITION TERMINAL Model: U05-1701-OS-VCB, UNIUBI-U05-1701-OS-VCB Trade Name:

Universal Ubiquitous Co., Ltd. E-mail: wangjianhao@uni-ubi.com that hereby declares U05-1701-OS-VCB, UNIUBI-U05-1701-OS-VCB]

requirements and other relevant provisions of Directive 2014/53/EU.

[Name: FACE RECOGNITION TERMINAL, Model:

the essential in compliance with this is This product is intended for sale and application in a business environment. RED Article 10 2

-This product can be used across EU member states RED Article 10 10

-The product is class 1 product, No restrictions The RF distance between body and product is 20cm Bluetooth V4.2 Frequency Range: 2402-2480MHz Max.RF Output Power: 8.54dBm (EIRP) Wi-Fi (2.4G) Frequency Range: 2412-2472MHz for 802.11b/g/n(HT20); 2422-2462MHz for 802.11n(HT40) Max.RF Output Power: 16.22dBm (EIRP) NFC Frequency Range: 13.56MHz Radiated H-Field: 3.11dBuA/m(@3m) SRD Frequency Range: 125KHz Radiated H-Field: 11.45dBuA/m(@3m) For the above information, The Working Temperature, Max. RF Output Power, Radiated H-Field and Working Frequency for EU only. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Reference No.: WTX22X04081920W001/002/003/004/005 Page 1 of 14 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2AUI4-U05-1701 Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

Universal Ubiquitous Co.,Ltd. Date: 2022-07-19 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AUI4-U05-1701 Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram Tune-Up Information Operational Description Security Information Schematics Software Defined Radio (SDR) Information Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. or For 180 days pursuant to KDB 726920 DO1. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Universal Ubiquitous Co.,Ltd.

-ianhae\Wang. jianhao Wang/engineer

Universal Ubiquitous Co.,Ltd. Room 658, Building 1, No.1, Lvting Road, Cangqian Street, Yuhang District, Hangzhou 311121, China

(FCC ID : 2AUT4-U05-1701) POWER OF ATTORNEY DATE: 2022-07-19 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse 7 We, Universal Ubiquitous Co.,Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Universal Ubiquitous Co.,Ltd. _-dianhag Wang

(jianhao Wang)

(engineer)

Universal Ubiquitous Co.,Ltd. Room 658, Building 1, No.1, Lvting Road, Cangqian Street, Yuhang District, Hangzhou 311121, China Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2022-07-19 SUBJECT: FCC Application for FCC ID: 2AUI4-U05-1701 To Whom It May Concern:

I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B device. |

understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the

"accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, Universal Ubiquitous Co.,Ltd. __dionhad Wong.

(jianhao Wang)

(engineer)