Bluetooth Headset Connecting to your life BTHS03 User Manual The Bluetooth Bluet name and the Bluetooth Bluet trademarks are owned by Bluetooth Bluet SIG, Inc., Printed in Taiwan Bluetooth Headset Table of Contents Introduction 1. Introduction .................................................................................. Product Features .................................................................... System Requirements ............................................................ Package Contents .................................................................. Specifications .......................................................................... Supported Profiles .................................................................. 2. Getting to Know your Hands-Free Headset ................................. 3. Before you Begin ......................................................................... 4. Pairing to a Bluetooth Technology-Enabled Phone ..................... 5. Using your Headset ..................................................................... 6. Information ................................................................................... 1 1 2 2 3 5 6 8 11 22 25 Congratulations and thank you for purchasing the Bluetooth Headset. The Headset features the breakthrough Bluetooth wireless technology that lets you createefficient communications with your Bluetooth technology-enableddevice. Please review this manual carefully to ensure you get themost from your product. Product Features The Bluetooth Headset is compliant with Bluetooth standard version 1.1 and provides:
Support for the Headset and Hands-Free Profiles:
Compatibility with Bluetooth technology-enabled devices Built-in security: up to 128-bit encryption and authentication 1 Introduction Specifications System Requirements Compatible with all Bluetooth v1.1, including, but not limited to:
Sony Ericsson T610, T616, T618, T68i, P800 Nokia 3650, 3600, 6310, 6310i, 8910, 8910i, 6600, N-Gage. Philips FisioR 820, 825 Ericsson T39m, T68m Package Contents Bluetooth Headset 5V DC, 300mA Power Supply User Manual Model: BTHS03 Bluetooth Compliance: Version 1.1 Operating Frequency: 2.4 to 2.4835GHz Spread Spectrum: FHSS (Frequency Hopping Spread Spectrum) Modulation: GFSK (Gussian Frequency Shift Keying) RF Output: 0 dBm, Class 2 Sensitivity: < 0.1% BER at -81 dBm Frequency Stability: +/- 10PPM Operation Range: 10m (33 ft.)*
Design: Left and right ear Battery: Rechargeable lithium polymer Battery 2 3 Specifications Supported Profiles Antenna: Integrated, 0 +/- adbi LED Indicator: Power/Pairing Charger: 5.0V DC, 300mA Typical Power Consumption: TX: 150mA, Rx 80mA Dimensions: 64mm (L) x 24mm (W) x 21mm (H) Weight: 21 grams
* 10m range is dependent upon environment, number of users, and other wireless devices within immediateproximity.Specifications are subject to change without notice. Supported Profiles The services supported by your Headset are defined as "Profiles". Available Profiles include:
Hands-Free Headset 4 5 Getting to Know your Hands-Free Headset Status Indicators DC Plug Status Indicators Mute Pairing Power On-Off LED:
5 quick blue flashes 5 quick red flashes Continues blue/red flashing Flashes blue once every 3 seconds 3 quick blue flashes every 3 seconds Status:
Headset is being turned on Headset is being turned off Headset is in pairing mode Headset is paired but not active Headset paired and active 7 Before you Begin Charge your Headset Your Bluetooth Headset is equipped with a rechargeable lithium polymer battery and must be charged prior to use. 1. Plug one end of the power adapter into the Headset and the other end into an available electrical outlet. 2. The charging indicator on the charger will illuminate red. 3. Charge the Headset until the red charger indicator light goes out
(approximately two hours). Note: The red indicator light will be on while the Headset is charging and will turn off when charging is complete. 9 Ear Hook Pairing to a Bluetooth Technology-Enabled Phone For specific instructions to pair your phone, find your model on the following pages or refer to your mobile telephone user guide. Note: For security purposes, the Headset will remain in pairing mode for 60 seconds. If the paring process is not completed within 60 seconds, repeat the entire pairing procedure. LED Window Talk / End Switching Volume down Volume up 6 Before you Begin Warning:
The Bluetooth Hands-Free Headset and charger have magnets in them that allow them to dock with each other. Keep magnets at least two feet away from computer hard drives, and other magnetic storage media, monitors, televisions, VCRs, videotapes, cameras, camera film, and credit cards, as the magnets may corrupt or destroy stored data. Before you Begin Adjust the Earpiece The earpiece was designed to comfortably fit around the left or right ear. 8 10 11 Pairing to a Bluetooth Technology-Enabled Phone 7. Select " Headset" to initiate the pairing. 8. Enter the passkey or pin "0000" (four zeros). LED lights switch from flashing blue/red to flashing blue every three seconds. Your Headset is now ready to use. You should see the Pairing to a Bluetooth Technology-Enabled Phone Pairing Process for Nokia 6310 and 6310i f. 1. Ensure that your Headset is turned of 2. Press and hold down the Power button. After approximately eight seconds, the blue light will flash five times, indicating the Headset is powered on. DO NOT RELEASE THE BUTTON until you see an alternating blue and red light. pairing mode. 3. Select "Menu" and then go to "Bluetooth". 4. Make sure your Bluetooth capability is turned ON. 5. Scroll down to "Search for Audio Accessories". 6. Your phone will find the Headset and list it under
"Found Devices". This indicates the Headset is in 12 13 Pairing to a Bluetooth Technology-Enabled Phone Pairing Process for Nokia 3650 and N-Gage 1. Ensure that your Headset is turned off. 2. Press and hold down the talk button. After approximately eight seconds, the blue light will flash five times, indicating the Headset is powered on. DO NOT RELEASE THE BUTTON until you see an alternating blue and red light. This indicates the Headset is in pairing mode. 3. Select "Menu" and then go to the "Tools" folder. 4. Select "Bluetooth". 5. Make sure your Bluetooth capability is turned ON. 6. Scroll to the "Paired Devices" tab and select "Options". 7. Under "Options" select "New Paired Devices". Pairing to a Bluetooth Technology-Enabled Phone 8. Your phone will search and find the Headset. 9. Select " Headset" to initiate the pairing. 10. Enter the passkey or pin "0000" (four zeros). You should see the LED lights switch from flashing blue/red to flashing blue every three seconds. 11. Exit the Menu. 12. On your Headset, initiate a connection to your mobile phone by pushing the talk button once. After a few seconds you will be asked on your mobile phone to accept a connection from the Bluetooth Headset. Your Headset is now ready to use. 14 15 Pairing to a Bluetooth Technology-Enabled Phone Pairing Process for Sony Ericsson T68i 1. Ensure that your Headset is turned off. 2. Press and hold down the talk button. After approximately eight seconds, the blue light will flash five times, indicating the Headset is powered on. DO NOT RELEASE THE BUTTON until you see an alternating blue and red light. This indicates the Headset is in pairing mode. 3. Go to the Menu screen for your T68i. 4. Select the "Connect" icon, then select "Bluetooth". 5. Go to "Paired Devices" and "Add a Device". 6. Select "Phone Initiates". 7. Select "Hands-Free" (make sure your Headset is flashing blue/red). Pairing to a Bluetooth Technology-Enabled Phone 8. Your phone will find the Headset and list it under
"Found Devices". 9. Select "Headset" to initiate the pairing. 10. Enter the passkey or pin "0000" (four zeros). You should see the LED lights switch from flashing blue/red to flashing blue every three seconds. 11. Your Headset is now ready to use. 16 17 Pairing to a Bluetooth Technology-Enabled Phone Pairing Process for Sony Ericsson T610, T616, T618 1. Ensure that your Headset is turned off. 2. Press and hold down the talk button. After approximately eight seconds, the blue light will flash five times, indicating the Headset is powered on. DO NOT RELEASE THE BUTTON until you see an alternating blue and red light. This indicates the Headset is in pairing mode. 3. Go to the Menu screen for your T610 series. 4. Select the "Connect" icon, then select "Bluetooth". 5. Select "Hands-free Devices". 6. Select "My Hands-free" and "Add a new hands-free device". 7. Your phone will find the Headset and list it under
"Found Devices". Pairing to a Bluetooth Technology-Enabled Phone 8. Select " Headset" to initiate the pairing. 9. Enter the passkey or pin "0000" (four zeros). You should see the LED lights switch from flashing blue/red to flashing blue every three seconds. 10. Your Headset is now ready to use. 18 19 Pairing to a Bluetooth Technology-Enabled Phone Pairing to a Bluetooth Technology-Enabled Phone Pairing Process for Sony Ericsson P800 1. Ensure that your Headset is turned off. 2. Press and hold down the talk button. After approximately eight seconds, the blue light will flash five times, indicating the Headset is powered on. DO NOT RELEASE THE BUTTON until you see an alternating blue and red light. This indicates the Headset is in pairing mode. 3. From the application selection screen, select
"Control Panel". 4. Select the "Connections" tab, then select "Bluetooth" from " " the list. 5. Select the "Settings" tab and bring down the "Operation Mode"
drop-down menu. 6. Select "Auto", then select the "Add" button. 7. Once you've done this, the P800 will detect all the discoverable Bluetooth devices within its range. 8. Once the P800 has detected your Headset, select it, and when prompted for the passkey, enter "0000" and select "Done". 9. You have now successfully paired your Bluetooth Hands-Free Headset with your P800 phone. 10. You may select the "Done" button to return to the Control Panel. 20 21 Using your Heaset Using your Heaset Switching the Headset On and Off To turn your Headset on, remove the Headset from the Power adapter, then press and hold the talk button until the LED indicator flashes blue five times. The LED indicator will flash blue every three seconds while the Headset is on. To turn your Headset off, press and hold the talk button until the LED indicator flashes red five times. Fitting the Headset Decide on which side of your head you will wear the Headset, and using your hand on that side, slide the ear hook gently over and around your ear in a circular motion. Adjust the ear hook to your ear by molding it around the contour of your ear. In order to put the Headset on, use a rotating motion around the center of your ear until the ear hook is completely positioned around the ear. Answering a Call To answer a call, wait until your Headset rings, then press the talk button once to answer. Ending a Call To end a call, press the talk button at any time during a phone call. Making a Call To make a call, dial using your mobile phone. Voice Dialing If your mobile phone allows voice dialing, push the talk button to initiate it through your Headset. 22 23 Using your Heaset Information Switching a Call To make headset switching to mobile phone, then press the talk button for 5 seconds. Volume Control To increase the volume on the Headset, push the volume button. To decrease the volume on the Headset, push the button. Regulatory Notices To identify this product, refer to the part or model number on the product label. Federal Communications Commission Notices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However , 24 25 Information there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of f and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Increase the separation between the equipment and receiver .
* Connect the equipment into an outlet on a circuit dif from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help. ferent Information Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. European Community Notice Hereby, BA-2100J that Bluetooth Headset is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 26 27 Information Information Products bearing the CE marking comply with the R&TTE Directive
(1999/5/EC), EMC Directive (89/336/EEC), and the Low V oltage Directive (73/23/EEC) issued by the commission of the European Community Compliance with these directives implies conformity to the following European Norms (in parentheses are the equivalent international standards and regulations):
* EN 60950 (IEC60950) - Product Safety
* ETS 300 328 - Technical requirements for radio equipment
* EN 301 489-17 - General EMC requirements for radio equipment This product may be used in all EU and EFT A countries. Wireless Notice W ireless Notice In some situations or environments, the use of wireless devices may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives, in hazardous locations, etc. If you are uncertain of the policy that applies to the use of this device, please ask for authorization to use it prior to turning it on. 28 29 Information Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. FCC Caution :To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). This equipment generates, uses and can radiate radio frequency energy and, if not installed This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
(1) This device may not cause harmful interference, and (2) This device must accept any cause harmful interference to radio or television reception, which can be determined by turning the equipment off interference received, including interference that may cause undesired operation. and on, the user is encouraged to try to correct the interference by one of the following measures:
. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 30 31