Quick Setup Guide UBHS-H5 Quick Setup Guide UBHS-H5 Features Power ON / OFF, Talk Play / Pause, EQ-Mode Volume Up / Down Volume Up / Down Built-In Microphone Next / Previous Quick Setup Guide UBHS-H5 Power ON/OFF Press and hold Power/Talk button for 2 seconds to switch the headset on or off. Power ON/OFF voice prompt is Hello / Bye Power ON/OFF voice prompt is Hello / Bye . Pairing and Connection While the headset is off, press and hold Talk for 4 seconds to start pairing mode. Once the headset is in pairing mode, select UBHS-H5 among discovered Bluetooth devices on the phone. When being connected , voice prompt is Connected. Using EQ effect Note: 2 types of EQ effect are programmed in the order below. While in Play / Pause mode long click the button to While in Play / Pause mode, long click the button to select the EQ effect of your choice. 1. Normal - No EQ effect is applied. 2. Bass - enhances low-frequency sound to provide rich and deep bass tones. 3. Live - Delivers natural and soft sound field effect simulating that of a live performance. p Quick Setup Guide UBHS-H5 Easy pairing UBHS-H5 supports easy pairing . When pairing , there is no need to enter the 0000. Host device also has to support easy pairing. Connecting the Headset Connecting from the phone: Among registered Bluetooth devices on the phone, select UBHS-H5. Connecting from the headset: Through auto-connect function, the headset automatically connects to the last device it was connected to when powered on. Resetting the Headset In case the headset needs to be reset, press Play , Talk and Volume Up buttons together simultaneously. Quick Setup Guide UBHS-H5 Multi Point Multi-point enables your headset to maintain an active connection with two mobile phones. This means your headset is ready when you want to make or take calls from either your personal or your work phone personal or your work phone. Before setting up multi-point mode, at least one other Bluetooth enabled device should be stored in the headset's pairing list. The headset will recognize the Bluetooth devices based on priority. By default, the first paired Bluetooth device will be the first priority device and the other Bluetooth device will be second priority. Quick Setup Guide UBHS-H5 Listening to music To:
Play/Pause Select a song Answer a call while playing music Change the volume Making phone call Do this:
1. Press button to launch the phones MP3 player and to start listening to music. 2. While MP3 player is in use, press button to pause or to resume play. p y 3. Double Click button to end music playback. While MP3 player is in use, press or buttons to select songs. 1. When receiving a call, press Talk button to answer the call. 2. Press Talk button while on the phone to end the call 3. When receiving a call, press button to reject the call.
- Music will resume playing when the call is rejected
- Music will resume playing when the call is rejected. Use + / - buttons to adjust the volume level. To:
Voice dial Redial Answer a call Answer a call End a call Refuse a call Change the volume Transfer a call between connected devices Do this:
Press the Talk button once to activate voice dial. Double click Talk button to redial last number. When receiving a call, press Talk button to answer the call. While talking on the phone, press Talk button to end the call. While receiving a call, press Play/Pause button to refuse the call. Use + / - buttons to adjust the volume level. During a phone conversation, press Talk button twice to switch the call between the headset and the phone. Quick Setup Guide UBHS-H5 Supports battery status notification at smart phone iOS Battery Meter Quick Setup Guide UBHS-H5 How to pairing the UBHS-H5 Computer running Windows 7 :
Note: Before you pair the headset with the computer, make sure the computer is equipped with a Bluetooth radio. Refer to the computers documentation or contact the computer manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth th t USB adapter (dongle). ll Bl t h Bl th di If d ti f t f f t t i i 1 Turn on Bluetooth on the computer. For instructions, see the computers documentation or contact the computer manufacturer. 2 Double-click the Bluetooth icon in the system tray, near the clock. 3 Click Add a device. 4 With the headset turned off, press and hold Talk for six seconds. The LED blinks blue and red rapidly and pairing mode is activated. 5 Double-click the UBHS-H5 icon on the computer or highlight the icon and click Next. 6 Click Close after the headset has been paired. N t T Note: To use the headset, it must be selected as default recording and playback device on the computer. d l b k d i d t it th h d f t d t b di lt l 7 Click Start, then click Control Panel. 8 Click Hardware and Sound, then under Sound, click Manage audio devices. 9 On the Recording tab, select Headset Microphone Bluetooth Hands-
free Audio, then click Set Default. 10 On the Playback tab, select Headset Bluetooth Hands-free Audio, then click Set Default. 11 Click OK. g p
, Quick Setup Guide UBHS-H5 How to pairing the UBHS-H5 Computer running Windows Vista :
Note: Before you pair the headset with the computer, make sure the computer is equipped with a Bluetooth radio. Refer to the computers documentation or contact the computer manufacturer for more information If you do not have a Bluetooth radio install a Bluetooth manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth USB adapter (dongle). 1 Turn on Bluetooth on the computer. For instructions, see the computers documentation or contact the computer manufacturer. 2 Double-click the Bluetooth icon in the system tray, near the clock. 3 Click Add Wireless Device. 4 With the headset turned off, press and hold Talk for six seconds. The LED blinks blue and red rapidly and pairing mode is activated. 5 Double-click the UBHS-H5 icon on the computer or highlight the icon and click Next. 6 Click Close after the headset has been paired. Note: The headset should be automatically selected as the default playback device If the Note: The headset should be automatically selected as the default playback device. If the headset is not the default playback device, complete Steps 7 through 9. 7 Click Start, then click Control Panel. 8 Click Hardware and Sound, then under Sound, click Manage audio device. 9 On the Playback tab, select Headset 2-Bluetooth Hands-free Audio, then click Set Default. 10 On the Recording tab, select Headset Microphone 2-Bluetooth Hands-free Audio, then click Set Default. 11 Click OK. Quick Setup Guide UBHS-H5 How to pairing the UBHS-H5 Computer running Windows XP :
Note: Before you pair the headset with the computer, make sure the computer is equipped with a Bluetooth radio. Refer to the computers documentation or contact the computer manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth USB adapter (dongle). 1 Turn on Bluetooth on the computer. For instructions, see the computers documentation or contact the computer manufacturer. 2 Double-click the Bluetooth icon in the system tray, near the clock. My Bluetooth Places opens. 3 Click Add a New Bluetooth Device. The Add Bluetooth Device Wizard opens. 4 Click Next. 5 With the headset turned off, press and hold Talk for six seconds. The LED blinks blue and red rapidly and pairing mode is activated. 6 Double-click the UBHS-H5 icon on the computer or highlight the icon and click Next. Note: If you are unable to locate the UBHS-H5 icon, click the Search Again button. 7 Select one of the Bluetooth hands-free types shown on the Add a Bluetooth Device Wizard screen, and click Next. 8 Select the services shown on the wizard screen to use with your Bluetooth headset, then click Finish. 9 To connect the device, double-click the MAB2 Hands-Free Unit icon or the UBHS-H5 Stereo Audio icon. Note: To use the headset, it must be selected as the default recording and playback device on the computer. 10 Click Start, then click Control Panel. 11 Click Sounds, Speech, and Audio Devices. 12 Click the Sounds and Audio Devices icon. 13 On the Audio tab, select Bluetooth Hands-free Audio or Bluetooth Stereo Audio in the Sound recording list, and select Bluetooth Hands-free Audio in the Sound playback list, if it is an option. Quick Setup Guide UBHS-H5 How to pairing the UBHS-H5 Mac computer :
Note: Before you pair the headset with the computer, make sure the computer is equipped with a Bluetooth radio. Refer to the computers documentation or contact the computer manufacturer for more information If you do not have a Bluetooth radio install a Bluetooth manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth USB adapter (dongle). 1 Turn on Bluetooth on the computer. For instructions, see the computers documentation or contact the computer manufacturer. 2 Click the Bluetooth status menu. 3 Click Set up Bluetooth Device. The Bluetooth Setup Assistant opens. 4 Click Continue. 5 Select Headset as the device type, then click Continue. 6 With the headset turned off, press and hold Talk for six seconds. The LED blinks blue and red rapidly and pairing mode is activated. 7 Select UBHS-H5, then click Continue. The computer gathers information. 8 Click Continue. 9 Click Quit when finished. C C Note: To use the headset, it must be selected as the default input and output device on the computer. 10 Click System Preferences, then click Sound. 11 Under Input, select UBHS-H5, then under Output, select Quick Setup Guide UBHS-H5 FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Quick Setup Guide UBHS-H5 IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. radio exempts de Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Quick Setup Guide UBHS-H5 LED light messages Headset Status Power on Turning off Low battery Low battery Recharging Recharging complete Pairing mode Connection complete Receiving a call Receiving a call Talking on the phone Specification Headset Status Bluetooth Version Supported Profiles Frequency Spectrum Working Distance Operating Temperature Operating Time Standby Time Product Size Product weight Average charging time LED Status Blue LED flashes Red LED dims and disappears Red LED blinks every 5 seconds on connection state Red LED stays on Blue LED stays on Blue and Red LEDs flash in rotation Blue LED blinks every 5 seconds Blue LED blinks every 0 5 seconds Blue LED blinks every 0.5 seconds Blue LED blinks every 1 seconds V3.0 HFP v1.6(HD), HSP v1.2, A2DP v1.2, AVRCP v1.4 2.4 ~ 2.4835 GHz ISM Band Up to 10m 14~140F (-10 ~ +60) Talk 20 hours / Music 15 hours 500 hours 5.5(L) x 5.1(W) x 2.4(H) inches 2.0 oz ( 57 g ) 2 Hours Note 1 : Battery life varies by volume level and audio content. 2 : The specification is subject to change with the product version.