600-1064-95R Micro Keyfob Installation and User Manual 600-1064-95R Manuel dinstallation & utilisation du Mini Tlcommande
(3)
(5)
(1) Figure 1:
(1)
(2)
(4)
(6) Figure 2:
(3)
(5) Figure 2: Battery replacement
(1) Battery holder
(2) Circuit board
(3) Battery
(4) Rubber touchpad
(5) Back cover
(6) Front cover Figure 1: Keyfob
(1) LED
(2) Lock button
(3) Unlock button
(4) Light button
(5) Star button
(6) Cover slot Figure 1: French
(1) DEL
(2) Verrouiller
(3) Dverrouiller
(4) Allurner
(5) toile
(6) Fente
(2)
(4)
(6) Figure 2: French
(1) French
(2) French
(3) French
(4) French
(5) French
(6) French EN Introduction The Micro Keyfob is a battery-powered, wireless device designed to fit on a keychain and is compatible with Simon, Concord, NetworX, and Allegro panels, Learn Mode Repeaters, and QuikBridge Loop Receivers. It provides a convenient option for the following security system operations:
Arm the system (doors, windows, and motions sensors). Arm the system with no entry delay (if programmed). Disarm the system. Trigger panic alarms. Turn system-controlled lights on or off (if programmed). Open system-controlled garage doors (if programmed). Refer to the control panel documentation for instructions on programming and sensor testing the keyfob. Keyfob operation Unlock button. Disarm the system. Lock button. Arm the system. Light button. Toggle system-controlled lights on/off (if programmed). Star button. As programmed in the system. When the battery is low, the LED light will not turn on when buttons are pressed, and the keyfob will not operate. To replace the keyfob battery:
1. To open the keyfob, insert a dime into the corner cover slot and gently pry the front and back covers apart. 2. Remove the circuit board and rubber touchpad assembly by pushing inward on one of the touchpad buttons. 4. 3. Slide the battery out and away from the circuit board. Dispose of the used battery according to battery directive instructions and/or instructions from local government authorities. Insert a new battery (+ side away from the circuit board). Press the circuit board firmly down into the rubber touchpad and then replace the touchpad assembly into the front cover. Line up the front and back covers starting at the key ring corner and then snap together. 5. Specifications Battery type and replacement battery Estimated battery life Transmistter frequency CR2032 coin cell battery CR2032 coin cell battery 5 years 319.5 MHz P/N 466-2413 REV A.06 24MAY11 1 Draft Dimensions (W H D) Operating temperature Replacement for 1.26 1.96 0.34 in. (32 50 9 mm) 10 to 120F (-12 to 49C) TX-4014-01-2, TX-4012-01-2, 60-659-95R 60-707-01-95R, 60-694-95R, NX-470 batterie sur la carte. Pressez la carte fermement vers le bas dans le joint/touchpad et remplacez alors le touchpad dans la couverture. 5. Alignez les couvertures avant et arrires dmarrant au coin d'anneau principal et puis cassez les deux moitis ensemble. FCC compliance This device complies with part 15 of the FCC Rules and IC RSS-210. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: B4Z-931-KEYFOB IC: 1175C-931KEYFOB This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-
003 du Canada. Contact information www.utcfireandsecurity.com or www.interlogix.com For customer support, see www.interlogix.com/customer-support. Copyright 2011 UTC Fire & Security. All rights reserved. FR Introduction Le Keyfob micro est un touchpad piles et sans fil conu pour s'adapter sur un keychain et est compatible avec des panneaux de Simon, d'accord, et de NetworX. Il fournit une option commode pour les exploitations du systme suivantes de scurit :
Armez le systme (portes, fentres, et sondes de mouvements). Armez le systme sans le retard d'entre (si programm). Dsarmez le systme. Dclenchez les alarmes de panique. Tournez les lumires systme-commandes "Marche/Arrt" (si programm). Ouvrez les portes systme-commandes de garage (si programm). Caractristiques Type de batterie et batterie de rechange Dure de vie de la pile prvue Transmitter frequency Dimensions (W H D) Temprature de fonctionnement Replacement for CR2032 coin cell battery CR2032 coin cell battery 5 ans 319.5 MHz 1.26 1.96 0.34 in. (32 50 9 mm) 10 to 120F (-12 to 49C) TX-4014-01-2, TX-4012-01-2, 60-659-95R 60-707-01-95R, 60-694-95R, NX-470 FCC compliance Ce dispositif est conforme la partie 15 des rgles de FCC IC RSS-
210. L'opration est sujette aux deux conditions suivantes : (1) ce dispositif peut ne pas causer l'interfrence nocive, et (2) ce dispositif doit accepter n'importe quelle interfrence reue, y compris l'interfrence qui peut causer l'opration peu dsire. FCC ID: B4Z-931-KEYFOB IC: 1175C-931KEYFOB Cet appareil numrique de la classe B est conforme la norme NMB-
003 du Canada. Contact information www.utcfireandsecurity.com ou www.interlogix.com Pour le support la clientle, voyez www.interlogix.com/customer-
support. Copywright 2011 UTC Fire & Security. Tous droits rservs. Rfrez-vous la documentation de panneau de commande pour des instructions sur programmer et la sonde examinant le keyfob. Opration de Keyfob Ouvrez le bouton. Dsarmez le systme. Bouton de serrure. Armez le systme. Allumez le bouton. Basculez les lumires systme-commandes
"Marche/Arrt". Tenez le premier rle le bouton. Ouvrez ou fermez une porte systme-
commande de garage. Pour remplacer la batterie de keyfob:
1. Pour ouvrir le keyfob, insrez un dixime de dollar dans la fente faisante le coin de couverture et tournez doucement jusqu' ce que la couverture spare de la couverture arrire. (Les restes d'anneau principal en place). 2. Enlevez le phoque de carte et en caoutchouc/touchpad par la pousse vers l'intrieur sur un des boutons de touchpad. Une fois enlev du logement, pluchez doucement le joint/touchpad en caoutchouc au loin de la carte. 3. Glissez la batterie dehors et partir de la carte. Dbarrassez-
vous de la batterie utilise selon des instructions directives de batterie et/ou des instructions des autorits gouvernementales locales. 4. Glissez une nouvelle batterie de cellules de la pice de monnaie CR2032 (ct positif partir de la carte) dans le support de 2 600-1064-95R Micro Keyfob Installation and User Sheet Draft