FCC ID: 2AS7E-SVS-T Smart Voice Sender Transmitter

Features Defined External Line-In Charging Terminal Microphone Indicator LED Earphone Jack Function Button Indicator LED UP Button Function Button DOWN Button Volume up / down Power Switch Transmitter (T) Receiver (R) Default usage method Power On and Off At power-on, the LED on the set group flashes 1 time. Connection method of transmitter (T) to receiver (R) When the transmitter is switched on and the receiver is turned on 5 seconds later, the two devices are automa-

tically connected. Battery status and charging Notifies the battery condition when power is turned on. Charge with a Micro USB Cable. During charging, the red LED lights up and it goes off when charging is completed.

(Chargeable power: DC 5V, 1000mA or less) Basic operation of buttons Divide into short and long presses depending on the time you press.

- Short : When the button is pressed and hold within 2 sec.

- Long : When the button is pressed and hold for more than 2 sec. (the blue LED is on) 1~2 SEC. OVER 2 SEC. Volume control You can adjust the sound volume in 8 steps (LED shown) with a short press of the "+" up button and the "-" down button. After 5 SEC. ON ON Transmitter (T) Receiver (R)

* Connecting a large number of receivers at a time can result in overload. So turn on the receiver sequentially. Select the amplified sound at Receiver Only operate at receiver and press the "Function Button"

shortly to enter DB Selection mode. SHORT PRESS

- At first, a short press of the function button will display the LED color of the currently selected DB. And every time you press the function button, you can select 7 tones.

* DB selection mode is automatically released after 5 seconds. DB1 RED DB2 ORANGE DB3 YELLOW DB4 GREEN Nomal High Amp 1 Low Amp 1 Low Amp 2 DB7 PURPLE DB6 INDOGO DB5 BLUE Low-High Amp High Amp 3 High Amp 2 Transmitter (T) microphone mode Transmitter is broadcasting microphone sound to receiver. External audio input

- When you connect an external audio to a 3.5mm audio jack on the transmitter, the microphone and external audio sound are broadcasted simultaneously. Sound source Mute

- To Mute On, press Down button shortly and press Up button shortly to Mute Off. Mute Off Mute On Change to Bluetooth mode

- Press the function button long to change to the Bluetooth mode. LONG PRESS Transmitter (T) bluetooth mode Transmitter is broadcasting Bluetooth sound to receiver. How to pair a Bluetooth device

- Press the "+" up button long to enter pairing mode.

(The green and red LEDs flash repeatedly) Start searching for Bluetooth in the settings on your smartphone, then connect the "GENIESOR2 SVS" device. LONG PRESS

> Enter Pairing Mode Change to microphone mode

- Press the function button long to change to the microphone mode. OVER 2 SEC. To prevent possible hearing damage when using a headset, do not listen to sound at high volume for long periods. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Size / Weight W 28.2 X H 82 X T12.2 [mm], 27g Bluetooth / Usable frequency / Modulation 4.2 / 2,402 ~ 2,480 MHz / FHSS Continuous usage time Battery capacity / Service temperature SVS-T Max 5 hours, SVS-R Max 7 hours 3.7V 450mAh /5 ~35 C KC certification number SVS-T : R-REM-uwc-SVS-T SVS-R : R-REM-uwc-SVS-R Battery : XU100987-17002B-5 V e r 2

. 0 U s e r s G u d e i i S m a r t V o c e S e n d e r

S V S

) T e l

8 2

3 1

2 6 5

4 4 2 7 F A X

8 2

5 0 4

3 7 3

4 4 2 8 E

m a i l

. i i n f o

u w c o m

. c o m

1 6 2 2 9

) 1 5 4

4 2

, G w a n g K y o s a n

r o

, Y e o n g t o n g

g u

, S u w o n

s i

, G y e o n g g i

d o

, 1 6 2 2 7 K o r e a FCC Compliance information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with RF exposure requirements set forth for an uncontrolled environment.

9.7mm XM Model : SVS-T IeC FE FCCID : XXXXX-XXXXXXXX_ Made in Korea FCC ID : 2AS7E-SVS-T LABEL HERE

Date: Aug 21, 2019 Subject: Attestation letter regarding the module degradation. FCC ID: A8TBM64S1 Model Name: BM64 To whom it may concern, We, UWICOM confirms that Microchip Technology Inc., is aware of our device, Smart Voice Sender Transmitter, FCC ID: 2AS7E-SVS-T will reuse their certified rf module, FCC ID: A8TBM64S1 for a new FCC certification. The module (FCC ID : A8TBM64S1) installed to our device, FCC ID: 2AS7E-SVS-T is identical as the one certified in May 30, 2016 without any modification. Original rf conducted port test results documented in 50041195 001 report will be submitted as a part of the report for FCC ID: 2AS7E-SVS-T certification. The output power reduced when the module is installed on our device because of software changes. ( Setting in EEPROM) Sincerely Yours, JaeHoon Lee / CEO UWICOM

UWICOM Industry University Cooperation Foundation, 703, 154-42, GwangKyosan-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16227 Korea Tel. +82-31-265-4427 / Fax. +82-50-4373-4428 CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 July 4, 2019 TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, UWICOM requests confidentiality for the following products:

FCC ID Number Product Title/Model 2AS7E-SVS-T Smart Voice Sender Transmitter / SVS-T The following exhibits contain trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our product. This material is not customarily available to the general public and we request that it be withheld from public inspection. We request that the following information submitted be held permanent confidential treatment. Permanent Confidential Request

-. Schematics

-. Block Diagram

-. Operational Description We also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give temporary confidentiality of commercially sensitive information prior to product release. Short-Term Confidential Request

-. External Photos

-. Internal Photos

-. Test set-up photo

-. User Manual If you have any questions, please feel free to contact me at the address shown below. Sincerely, JaeHoon Lee / CEO UWICOM

UWICOM Industry University Cooperation Foundation, 703, 154-42, GwangKyosan-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16227 Korea Tel. +82-31-265-4427 / Fax. +82-50-4373-4428 Date: July 4, 2019 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. UL Verification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern:

I, the undersigned, hereby authorize Ms. Athena Kim /Assistant manager of KCTL Inc. and hereafter referred to as KCTL, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Athena Kim /Assistant manager of KCTL Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing KCTL as our agent, we still recognize that we are responsible to:

a) b) c) d) comply with the relevant provisions of the certification program;

make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

e) f) g) h) i) j) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, JaeHoon Lee / CEO UWICOM