FCC ID: OWLA99-A Android POS Terminal

Statement Product Description Please read this guide carefully before using the device to ensure your safety and correct use of the device. For information about the device configuration, please refer to the contract or information related to the device and the seller of the device to you. The pictures in this guide are for reference only. If some pictures do not match the actual products, please refer to the actual products. Many network functions described in this document are special services provided by network service providers (ISPs). The availability of these network functions depends on the ISPs that provide the services to you. No part of this Manual shall be reproduced, excerpted, backed up, modified, transmitted, translated into other languages, or used in whole or in part for commercial purposes in any form or by any means without the permis-

sion of the Company. Package Content Components Name Quantity A99 Android POS terminal Lithium battery Power adapter USB cable Quick operation guide

(Certificate of qualification and Warranty card) Contactless sensing area Printing paper export Contactless indicator light Battery charging indicator light Function key Type-C USB port Front camera Magnetic card reader Display screen Virtual keys Flash light Power key

*SD card slots SAM card slots SIM2 slots Rear Cameras Docking interface NANO SIM slots IC card reader Name Front camera Function introduction Used for bar and QR code scanning and taking photos, etc. Magnetic card reader Magnetic stripe card reader, support bi-direction swiping. Display screen Touch screen, display transaction and operation prompt information, etc. Contactless sensing area Induction area for contactless IC card reading and writing. Printing paper export Printed receipts and bills export. Contactless indicator light The 4-color indicator provides a status indication for the operation that may vary depending on the application configuration. Battery charging indicator light Function key Type-C USB port Virtual keys Rear Cameras Flash light Docking interface Power key NANO SIM slots

*SD card slots SAM card slots SIM2 slots IC card reader The 2-color battery charging indicator light. Customizable key functions. Used for connecting external PC or other terminals, allows to do data transmission and battery charging. Include Menu, Home, and Back key. Used for bar and QR code scanning and taking photos, etc. Use when the light is dim when taking pictures or scanning code. Connecting Charging Dock or Docking Station. For power-on, power-off, restarting, airplane mode. NANO SIM card slot. Micro SD card slots SAM1 and SAM2 card slots. SIM card slot. IC card reader. Note: Those marked with "*" in front of the module name in the above table are optional parts, which shall be subject to the specific order requirements. Quick installation 2 Install the SIM/ SAM(PSAM) card:

3 Install and remove the lithium battery:

Troubles and Troubleshooting After-sale service Take out the POS terminal, lithium battery, the power adapter, and other necessary parts from the packing box, then follow the steps below for a quick installation. 1 Install the printing paper Pull up the printing paper container cover to open the container. Strip off the printing paper. Hold one side of the paper and put it into the container. Leave a bit of the paper on the top of the scudding knife. Close the cover when hearing the "tick" sound. Cautions Please be careful with the direction when installing the thermal printing paper, and please do so by following the figures below,otherwise it will cause a failure of printing. Open the battery cover. Follow the silkscreen indication and place each of the needed SIM/ SAM card separately into the right slot following the direction as the picture showed. Cautions 1When installing or removing the SIM/ SAM card, please confirm that the device is power-offed, otherwise the cards may be damaged 2When installing the SIM/ SAM card, the chip faces toward the internal side of the device 3SIM/ SAM card cannot paste stickers, tags, or other materials that may change the thickness of the card in order to prevent non-smooth installation or disassembly. Install the battery:

Open the battery cover Insert the plug side of the battery into the battery socket Put the battery into the battery container;

Close the battery cover. Remove the battery:

Open the battery cover after power-off;

Pull off the battery by grasping the line at the plug and pulling it up and off ;

Gently remove the battery from the battery container. Usage and Operation Power on / Power off / Restart:

Power on: press and hold the Power key on the keyboard for 2 seconds. When the backlight of the display scree is on, the device is activating. Power off/ Restart: press and hold the Power key for 2 seconds. The screen will display options for "shutdown/con-

textual model/restart/airplane mode" menu. Press the shutdown key to complete the shutdown; Press the restart key to restart the device.

[Cautions] When operating a transaction, the user interface is in the communi-

cation status. Please do not turn off your device. Device is frozen or has serious mistakes Troubles Failing to turn on the device when pressing the power key Display screen shows error massage about network or service Touch screen slow or incorrect reaction Troubleshooting 1. The battery is exhausted and cannot be recharged. Please change the battery. 2. The battery volume is low. Please recharge the battery. 1. The device may lost the ability of receiving signal when you are in a place where the signal is weak or reception is bad. Please try to relocate and try it again. 2. Some of the options may not be able to use because of the lack of reservation. Please contact your service providers for more information. If the device has a touch screen, and the screen reaction is incorrect, please try with the following options:

1. Take off the protective film on the screen because it may prevent the device recognize input correctly. We do not recommend to use any type of protective films for touch screens. 2. Please ensure that the screen is clean without greasy dirt. Please keep fingers dry and clean when touching the screen. 3. Please restart the device to solve any type of temporary software errors. 4. If the screen is scratched or damaged, please contact the agent or distributor selling the device to you. to be shutdown or If the device is frozen or suspended, it may need to re-motivate functions. If the device is frozen or has slow reaction, please press the power key for 6 seconds, and the device will be restarted automatically. restarted If you have any questions, please contact your local dealer. Warranty card Product Name:

Product Model:

Warranty terms:

1. Our company will provide you with high quality after-sales service. 2. If the user causes product damage due to human factors, the company will charge maintenance fee when repairing. 3. Please take good care of this card, which will be the warranty basis of our company. Certificate Inspector:

Date:

5 6 7 8 Troubles Troubles Troubleshooting Troubleshooting Short standby duration Short standby duration Cannot find another Cannot find another Bluetooth device Bluetooth device 1. Please turn off some functions for saving 1. Please turn off some functions for saving power when do not using them, such as power when do not using them, such as Bluetooth/WiFi/Data service, and etc. Bluetooth/WiFi/Data service, and etc. 2. Turn off not-in-use applications on the 2. Turn off not-in-use applications on the backstage will help to save power. backstage will help to save power. 1. Please ensure that Bluetooth and wireless 1. Please ensure that Bluetooth and wireless functions have been turned on. functions have been turned on. 2. Please ensure that the connected device has 2. Please ensure that the connected device has turned on its Bluetooth and wireless functions. turned on its Bluetooth and wireless functions. 3. Please ensure that the POS terminal and the 3. Please ensure that the POS terminal and the connected device are within the maximum connected device are within the maximum Bluetooth range of 10 meters. Bluetooth range of 10 meters. If the problem remains the same, please contact customer service. If the problem remains the same, please contact customer service. Matters need attention Cautions for use Unauthorized disassembly of this device will cause the built-in security key to be destroyed resulting in unusable. If the power adapter plug or power cord is damaged, please do not use them in case of electric shock or fire. Please do not touch power cord with wet hand or pull out the power adapter like pulling power cable. Please do not touch the device and power adapter with wet hand in case of short circuit, malfunction, or electric shock. Please stop using the power adapter and contact sales representatives for exchanging if the power adapter is caught in the rain, getting wet, or affected with damp seriously. The charge must be certified by local regulations and meet the charging specifications of the device. If the device has to connect USB ports, please ensure that the USB ports has USB-IF identification, and its performance is qualified with the USB-IF requirements. Operating environment Do not use the device during thunderstorms. Otherwise, the device may fail or you could get an electric shock. Avoid putting the terminal in direct sunlight high temperature, moist, or dusty environment Forbid non-professional to repair the terminal. Before insert the card, please check internal and around of IC card slot when you found some suspicious objects, must report to related administra-

tor. A door or cover intended only for occasional use by the ordinary person such as for the installation of accessories, may be removable if an instructional safeguard is provided for correct removal and reinstallation of the door or cover. Do not place the device in a too cold environment. When the temperature of the device rises, moisture may form inside the device, which may damage the circuit board. When charging the device, the power socket should be near the device and easily accessible. The charging area of the device must be kept away from debris, combustible materials or chemicals. Please do not disassemble the device without permission. Non-professional operation may damage the device. Do not touch the screen with pens, pencils or other sharp objects. Do not strike, throw, step on, or subject batteries to severe physical shock. Accessories requirements Please use manufacturer-authorized batteries, power adapters and other accessories. Use of unauthorized or incompatible accessories may result in fire, explosion or other hazard. The usage of unauthorized accessories will result in the violation of the warranty provisions or local relevant provisions, and may cause safety accidents. To obtain authorized accessories, contact the sales agent or distributor who sold the devices to you. Charger safety If the power adapter plug or usb cable is damaged, do not use it to avoid electric shock or fire. Do not touch the device and power adapter with wet hands to avoid short circuit, device failure or electric shock. Disconnect the charger from the device and the power socket when the battery is fully charged. Disconnect the power cord when you are not charging the device. Do not charge for a long time unattended. Do not strike, throw, step on, or subject the charger to severe physical shock. If the charger cover is damaged, contact the seller who sold the device to you to get it replaced. Battery safety Do not short circuit batteries, do not let metal objects or other conductive objects be in contact with the battery terminals. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Do not insert foreign bodies into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. If there is a battery fluid leakage, avoid contact with eyes or skin. In case of contact with eyes or skin, rinse immediately with plenty of water and seek medical advice. Do not use damaged batteries. When the standby time gets shorter than normal, please replace the battery. Environmental protection and resource recovery This product uses lithium batteries. If your country has regulations, be sure to dispose old batteries in the right places according to the regulations. Cautions There will be a danger of explosion using the wrong model of battery The battery must be disposed in accordance with the instructions FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and this device must accept any

(2) interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to reception, which can be radio or determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connect-

ed. television

-- Consult the dealer or an experienced radio/TV technician for help. FCC SAR statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environ-

ment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the require-

ments for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 4.0 W/kg averaged over ten grams of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the limbs. Quick Operation Guide A99 Android POS Terminal

-9-

-9-

-10-

-11-

-12-

-13-

-14-

-15-

The pictures and descriptions in this guide are for reference only, please prevaillin in kind. Address: 3/F, No.2 Building, Aisino Information Park, No.18A, Xingshikou Road, Haidian District, Beijing. Zip Code: 100195. Email: info@vanstone.com.cn Manufacture Name: Vanstone Electronic(Huizhou) Co.,Ltd. Manufacture Address: 4/F, No.12 Building, Aerospace Science And Technology industrial Park, No. 51, Zhongkai Road, Huizhou City, Guangzhou Province, China. Company Website: https://www.vanstone.com.cn/en

Name Model Input P / N Android POS Terminal A99 5V 2A C15B-6BFF-0RA8-4EN-1B0 (1-2-1) S / N FCC ID: OWLA99-A 00062000649 HVN:V1.01 Made In China)

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Vanstone Electronic (Beijing) Co., Ltd. Applicant Declaration Address FRN Grantee Code FCC ID Authorized Contact Name Contact Email Contact Phone 3F No.2 Building, Aisino corporation park 18A, Xingshikou Road, Haidian District, Beijing, China 100195 0021918081 OWL OWLA99-A ZhiQin Shan gcert@vanstone.com.cn 86-10-88048100 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) f) g) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List

[Vanstone Electronic (Beijing) Co., Ltd.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules.

[Vanstone Electronic (Beijing) Co., Ltd.] (the applicant) certifies that, as of the date of the filing of the application, the applicant [ is not]

identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature:

Date:2024-04-01 Print Name:

Title:

ZhiQin Shan Quality Engineer

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 2 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 2 of 2 Original Issue: Jan. 4, 2021

Vanstone Electronic (Beijing) Co., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:

Confidentiality Request regarding application for FCC ID: OWLA99-A LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Tune up procedure Software Security Description BOM List The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within 0 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: ZhiQin Shan Title: Quality Engineer Signature:

On behalf of Company: Vanstone Electronic (Beijing) Co., Ltd. Telephone: 86-10-88048100 E-mail: gcert@vanstone.com.cn

Vanstone Electronic (Beijing) Co., Ltd. Date: 2024-04-01 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: OWLA99-A To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) and Keny Xu in SGS-

CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Vanstone Electronic (Beijing) Co., Ltd. This authorization is valid until further written notice from the applicant. Print Name: ZhiQin Shan Title: Quality Engineer Signature:

On behalf of Company: Vanstone Electronic (Beijing) Co., Ltd. Telephone: 86-10-88048100 E-mail: gcert@vanstone.com.cn

48 [model] US_Agent_2.911(d)(7)-U, V05 Vanstone Electronic (Beijing) Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046

[2024-04-02]

U.S. Agent Designation

[Vanstone Electronic (Beijing) Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: OWLAQ9-A):

Name and company of U.S. agent: [UUX GROUP INC]

Physical U.S. address of agent: [36 South 18th Avenue, Suite A Brighton, CO USA 80601]

FRN of U.S. agent: [0033701590]

Email address of U.S. agent: [uuxforever@outlook.com]

[UUX GROUP INC] acknowledges their obligation to accept service of process on behalf of [Vanstone Electronic

(Beijing) Co., Ltd.].

[Vanstone Electronic (Beijing) Co., Ltd.] with the FRN [0021918081] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, hig Shan Signature Signature aa

[ZhiQin Shan] [Jack Fu]

[Quality Engineer] [Manager]

[Vanstone Electronic (Beijing) Co., Ltd.] [UUX GROUP INC]

The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.