Urban Active Vehicle (Maven) Installation Instruction Sheet Rev 2.1
(Applies to GM P/Ns 13532223 and 13532224) Step 1: Install supplied Y-harness into vehicle (either snap-in or flange style depending on vehicle requirements). Urban Active Vehicle (Maven) Installation Instruction Sheet Rev 2.1
(Applies to GM P/Ns 13532223 and 13532224) Step 1: Install supplied Y-harness into vehicle (either snap-in or flange style depending on vehicle requirements). Step 2: Turn vehicle on. Step 2: Turn vehicle on. Step 3: Plug accessory module into supplied Y-harness. Step 3: Plug accessory module into supplied Y-harness. Step 4: Wait for 1 to 2minutes to allow accessory to read vehicle VIN. Step 4: Wait for 1 to 2minutes to allow accessory to read vehicle VIN. Step 5: Verify correct hashed VIN using any BLE scanning tool. Step 5: Verify correct hashed VIN using any BLE scanning tool. Step 6: If hashed VIN does not match use BLE scanning tool to complete a radio level connection. Step 6: If hashed VIN does not match use BLE scanning tool to complete a radio level connection. Step 7: Confirm correct hashed VIN using BLE scanning tool. Step 7: Confirm correct hashed VIN using BLE scanning tool. Step 8: Secure accessory to vehicle with connectors facing down. Step 8: Secure accessory to vehicle with connectors facing down. Step 9: Accessory installation is complete. Step 9: Accessory installation is complete. Urban Active Vehicle (Maven) Installation Instruction Sheet Rev 2.1
(Applies to GM P/Ns 13532223 and 13532224) Urban Active Vehicle (Maven) Installation Instruction Sheet Rev 2.1
(Applies to GM P/Ns 13532223 and 13532224) Step 1: Install supplied Y-harness into vehicle (either snap-in or flange style depending on vehicle requirements). Step 1: Install supplied Y-harness into vehicle (either snap-in or flange style depending on vehicle requirements). Step 2: Turn vehicle on. Step 2: Turn vehicle on. Step 3: Plug accessory module into supplied Y-harness. Step 3: Plug accessory module into supplied Y-harness. Step 4: Wait for 1 to 2minutes to allow accessory to read vehicle VIN. Step 4: Wait for 1 to 2minutes to allow accessory to read vehicle VIN. Step 5: Verify correct hashed VIN using any BLE scanning tool. Step 5: Verify correct hashed VIN using any BLE scanning tool. Step 6: If hashed VIN does not match use BLE scanning tool to complete a radio level connection. Step 6: If hashed VIN does not match use BLE scanning tool to complete a radio level connection. Step 7: Confirm correct hashed VIN using BLE scanning tool. Step 7: Confirm correct hashed VIN using BLE scanning tool. Step 8: Secure accessory to vehicle with connectors facing down. Step 8: Secure accessory to vehicle with connectors facing down. Step 9: Accessory installation is complete. Step 9: Accessory installation is complete. FCC ID: 2AJFG561107 or 2AJFG561108 FCC ID: 2AJFG561107 or 2AJFG561108 Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC: 21819-561107 or 21819-561108 IC: 21819-561107 or 21819-561108 This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux normes dexemption de licence RSS dIndustry Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer dinterfrence et (2) cet appareil doit accepter toute interfrence, notamment les interferences qui peuvent affecter son fonctionnement FCC ID: 2AJFG561107 or 2AJFG561108 This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux normes dexemption de licence RSS dIndustry Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer dinterfrence et (2) cet appareil doit accepter toute interfrence, notamment les interferences qui peuvent affecter son fonctionnement FCC ID: 2AJFG561107 or 2AJFG561108 Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC: 21819-561107 or 21819-561108 IC: 21819-561107 or 21819-561108 This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux normes dexemption de licence RSS dIndustry Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer dinterfrence et (2) cet appareil doit accepter toute interfrence, notamment les interferences qui peuvent affecter son fonctionnement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux normes dexemption de licence RSS dIndustry Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer dinterfrence et (2) cet appareil doit accepter toute interfrence, notamment les interferences qui peuvent affecter son fonctionnement