August 20, 2023 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Modular Approval Request FCC ID: 2AHIS-V60GINCARVG The following attestation addresses the requirements to support modular approval:
Modular approval requirement Yes (provide brief statement) No *
(a) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly
(b) The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal
(c) The module must contain power supply regulation on the module
(d) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b)
(e) The module must demonstrate compliance in a stand-alone configuration
(f) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements)
(g) The module must comply with all specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements Yes. The radio elements of V60G-InCar are shielded (see technical description). Yes, the data signals are buffered by CAN transceiver interconnection, and further by the data bus of VYYR7203 component. The modulation of radio signals is performed internally to the VYYR7203 and is not driven directly by the data inputs. Yes, V60G-InCar has on-board voltage regulators (see technical description and schematics) Yes, V60G-InCar contains antennas embedded within the PCB itself as an integral part of the board. Yes, V60G-InCar receives its power supply through a connector, from the external source or a battery pack, and operates autonomously per host-trigger. Yes, V60G-InCar will have either a silk-screen printed FCC ID or an attached label. The product complies with the FCC RF Exposure requirements, as demonstrated within the supplied RF Exposure exhibit Modular approval requirement Yes (provide brief statement) No *
(h) The module must comply with RF exposure requirements The module complies - see the 15.255 and other related data in the test report, and the RF exposure report.
* Please provide a detailed explanation if the answer is No. Yours sincerely, Name: Naftali Chayat Title: CTO Company: Vayyar Imaging Ltd