GENERAL OPERATION Standard Communications Warranty against Defects PRINTING SPECIFICATIONS: GR350BT QUICK START GUIDE Dimensions: 329 X 178 Folded Twice To 110 X 178 Stock:
Print:
Finish:
Part Number: 311115 Drawing Number: 51154-1 130 GSM Satin Art Both Sides CMYK Throughout Folded to size ARTWORK SUMMARY 51154-1 311115 DRAWING #
PART #
JIRA REFERENCE TECHDOCS-37 ECO #
SUPPLIER MPE #
N/A VELEX CONTROLS The diagram below details the operational controls of the GR350BT radio. LCD Screen Next Pre-set Broadcast Station Menu / Return Input Source Selection /
Power On/O"
MENU SRC CH CH
BND MUTE Previous Pre-set Broadcast Station Control Knob
(Rotate to scan;
Press to select) Tune Down (Radio) /
Previous Track (Media) Tune Up (Radio) /
Next Track (Media) Mute (Audio) /
Adjust Display Backlight Pause/Play (Media) /
Select Band (Radio) AM/FM RECEIVER OPERATION The GR350BT has two AM bands, and three FM bands. The 5 frequency bands are labelled as AM1, AM2, FM1, FM2 and FM3. To manually tune the radio to the desired frequency, brie%y press the Tune Up or Tune Down button. To scan for stations automatically, press and hold the Tune Up or Tune Down button. BLUETOOTH OPERATION Using Bluetooth, you can stream A2DP audio directly to your radio. Press the SRC button repeatedly to cycle through the radios available input sources. Alternatively, select Bluetooth from the menu. To pair your smart phone, view the list of available Bluetooth devices (some devices require you to tap Scan to populate the list). Select GR350BT when it appears on the list. NOTE: The GR350BT radio supports music streaming only. It does not support making or receiving calls. This warranty against defects is given by Standard Communications Pty 2.5 We warrant that we will perform services with reasonable care and Ltd ACN 000 346 814 (We, us, our or GME). Our contact details are set skill and agree to investigate any complaint regarding our services out in clause 2.7. 1. Consumer guarantees 1.1 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 1.2 To the extent we are able, we exclude all other conditions, warranties made in good faith. If we are satis"ed that the complaint is justi"ed, and as our sole liability to you under this warranty (to the extent permitted at law), we agree to supply those services again at no extra charge to you. 2.6 To make a warranty claim you must before the end of the applicable warranty period (see warranty table), at your own cost, return the goods you allege are defective, provide written details of the defect, and give us an original or copy of the sales invoice or some other evidence showing details of the transaction. and obligations which would otherwise be implied. 2.7 Send your claim to:
2. Warranty against defects 2.1 This warranty is in addition to and does not limit, exclude or restrict your rights under the Competition and Consumer Act 2010 (Australia). or any other mandatory protection laws that may apply. 2.2 We warrant our goods to be free from defects in materials and workmanship for the warranty period (see warranty table) from the date of original sale (or another period we agree to in writing). Subject to our obligations under clause 1.2, we will at our option, either repair or replace goods which we are satis"ed are defective. Standard Communications Pty Ltd. PO Box 96 Winston Hills, NSW 2153, Australia. Tel: (02) 8867 6000 Fax: (02) 8867 6199 Email: servadmin@gme.net.au 2.8 If we determine that your goods are defective, we will pay for the cost of returning the repaired or replaced goods to you, and reimburse you for your reasonable expenses of sending your warranty claim to us. 3. What this warranty does not cover We warrant any replacement parts for the remainder of the period of 3.1 This warranty will not apply in relation to:
warranty for the goods into which they are incorporated. 2.3 To the extent permitted by law, our sole liability for breach of a condition, warranty or other obligation implied by law is limited
(a) in the case of goods we supply, to any one of the following as we decide
(i) the replacement of the goods or the supply of equivalent goods;
(ii) the repair of the goods;
(iii) the cost of repairing the goods or of acquiring equivalent
(a) goods modi"ed or altered in any way;
(b) defects and damage caused by use with non Standard Communications products;
(c) repairs performed other than by our authorised representative;
(d) defects or damage resulting from misuse, accident, impact or neglect;
(e) goods improperly installed or used in a manner contrary to the relevant instruction manual; or
(f) goods where the serial number has been removed or made goods;
illegible.
(b) in the case of services we supply, to any one of the following as 4. Warranty period GR350BT Quick Start Guide Marine Bluetooth Radio The full Instruction Manual can be downloaded from www.gme.net.au INTRODUCTION Congratulations on purchasing your compact AM/FM Marine Stereo with bluetooth. Your GME GR350BT Marine Stereo combines the very latest in electronic hardware and software, to produce an extremely compact entertainment system with innovative features and outstanding performance. WHATS IN THE BOX
GR350BT AM/FM marine stereo
DC power lead
Mounting hardware
Mounting template
Speaker leads
Quick start guide we decide 4.1 We provide the following warranty on GME products. No repair or
(i) the supplying of the services again;
replacement during the warranty period will renew or extend the
(ii) the cost of having the services supplied again. warranty period past the period from original date of purchase. KEY FEATURES 2.4 For repairs outside the warranty period, we warrant our repairs to be free from defects in materials and workmanship for three months from the date of the original repair. We agree to re-repair or replace
(at our option) any materials or workmanship which we are satis"ed PRODUCT TYPE are defective. LAND AND MARINE ENTERTAINMENT SYSTEMS WARRANTY PERIOD 1 YEAR
Bluetooth streaming
4 X 40W Speaker outputs
USB/AUX inputs
Full-colour 69 cm (2.7) TFT LCD display
Built-in AM/FM tuner
Water-resistant Requires Bluetooth 2.1 or later. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GME is under license. Other trademarks and trade names are those of their respective owners. CHOOSING A LOCATION FOR YOUR RADIO INSTALLATION The GR350BT is designed for in-dash mounting in an accessible position near your vessels steering position. Keep the following points in mind when choosing a location:
Minimise excessive exposure to continuous rain or spray, excessive vibration or continuous direct sunlight. Allow room behind the radio to run the DC Lead to the power source. Allow a free %ow of air around the heat sink at the back of the radio. To avoid interference with compasses, ships autopilot sensors etc., the GR350BT radio should be mounted at least 300 mm away from such devices. MULTIMEDIA OPERATION The GR350BT radio can play a variety of multimedia *les music / movies / photos directly from a USB memory drive up to 16GB in size. gme.net.au Standard Communications Pty Ltd trading as GME. Head O+ce: 17 Gibbon Road, Winston Hills NSW 2153, Australia Australia. New Zealand: PO Box 58446 Botany, Auckland, 2163, NZ. T: (09) 274 0955. All international enquiries email: wpexport@gme.net.au 5 Drawing No: 51154-1 Part No: 311115 1 MOUNTING THE RADIO WIRING DIAGRAM DC CONNECTIONS Source Unit Trim Bezel Panel Mounting Screws NOTE: Select a suitable mounting location. Then examine the area behind the panel to determine if there is su+cient access for routing the cables and *tting the mounting screws. For panels of 6 9 mm thickness such as aluminium, plywood or *breglass, the unit can be mounted using the 12 mm screws supplied (refer the diagram above). 1. 2. 3. 4. 5. Cut out a circular hole 80 mm (3.15 inch) in diameter on your mounting location. Keep in mind that at least 140 mm (5.5 inch) depth is needed to mount the radio. IMPORTANT: Do not mount this unit where it can be submerged in water. Use the supplied mounting template to mark and drill holes for the four mounting screws. Secure unit with the supplied screws. Press on the Trim Bezel to the front side of the unit. Plug in all wiring harnesses and cables. Refer the wiring diagram in this guide for details. USB Radio antenna Front right speaker Front left speaker Rear right speaker Rear left speaker Auxiliary input DC Cable Fuse 15 Amp DC Cable Red + ve Black - ve 12 V battery WIRING & CONNECTIONS ANTENNA INSTALLATION AND CONNECTION When connecting the GR350BT to the electrical system of your vessel, please refer the wiring diagram on the next page. CAUTION: The GR350BT is designed for vessels with a 12 Volt DC negative () ground
(earth) electrical system only. Reverse polarity or over-voltage connection will result in internal damage to your unit, voiding the warranty and requiring servicing by quali*ed personnel. It is essential to select a good quality AM/FM antenna. The antenna should be mounted in a position as high as practically possible to ensure good reception, especially in areas with low signal strength. When installing the antenna, ensure a minimum clearance of around 20 cm from bow or stern rails or windscreen frames etc. Place the antenna at least 1 metre from two-way radio antennas to minimise interference from radio transmissions. While connecting the radio, refer the wiring diagram in this guide. 1. 2. Connect the RED power lead to the Positive (+) side of the battery or to an accessory point in the vessel or vehicles fuse box that provides a +12 Volt DC connection. Connect the BLACK power lead to the Negative () side of the battery or to a ground point in your vessel or vehicle. SPEAKER CONNECTIONS When connecting the speakers to your radio, the speakers should be connected to the respective FRONT (left/right) and REAR (left/right) speaker %y-leaded sockets at the back of the unit. The GR350BT radio is supplied with four 3.5 mm speaker adapter leads. The speaker adapters are labelled and should be matched with the labels on the speaker socket %y-
leads to ensure correct speaker phasing. Incorrect polarity (speaker phasing) will result in a signi*cant reduction of bass response and stereo e>ect. When connecting the speakers, observe the correct speaker polarity by matching the white stripes on the speaker leads with the white stripes on the adaptor cable, as shown in the connections diagram below. Connect all four speakers as shown in the connection diagram below. If you wish to connect only two speakers, connect these to the Front speaker sockets and adjust the Fader control to the FRONT speakers. To protect against water ingress, replace the protective covers on any unused speaker sockets. GR350BT Radio 1 1 Bullet Connectors SPEAKER ADAPTOR LEADS 1 White Stripe L R Speakers CAUTION:
1. The GR350BT is a four-speaker system that requires two separate wires for each speaker. DO NOT touch the speaker wires together or allow them to touch other wiring or the vessel ground (earth). 2. The use of speakers with an impedance of LESS than 4 Ohms is NOT recommended, as they will cause excessive loading of the GR350BTs audio output circuit and may result in the radio overheating. To connect the antenna to your radio:
Plug the antenna lead into the %y-leaded antenna socket on the rear of the unit. The socket accepts a standard AM/FM radio bayonet type connector. NOTE: The antenna socket is not water-proof. Ensure that all connections are water-proofed. 2 3 4 FCCWarningStatement Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould voidtheusersauthoritytooperatetheequipment.Thisequipmenthasbeentestedandfoundto comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidential installation. This equipment generates uses and can radiate radio frequency energy and, if not installedandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio communications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticular installation. If this equipment does cause harmful interference to radio or television reception, whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotryto correcttheinterferencebyoneormoreofthefollowingmeasures:
Reorientorrelocatethereceivingantenna.
Increasetheseparationbetweentheequipmentandreceiver.
Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected.
Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowing twoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and
(2) this device must accept any interference received, including interference that may cause undesiredoperation.
FCC ID: 2AUPH-GR350BT