VR-N7500 Fast Operate Manual Section I: How To Connect VR-N7500 With Cell-phone 1For Android user Scan the QR code to download the HT APP or visit the website:
http://www.vgc.net.cn/download/22-en.html For IOS user Search 'BS HT' in APPLE store to download 2Open the app, select-[BIND NEW DEVICE]. Turn-on the mobile radio, then press POWER key twice, a 'BEEP' will be heard and red-green light flashing means the radio is now in pairing status 3Select the scanned device then bind it 4Some mobile phone Bluetooth pairing requires authorization, so select to confirm Bluetooth pairing can be paired successfully. check the phone menu, MUST Hand microphone status description:
OK button M buttons Short press Current channel prompts Short pressChannel/Volume switch Long press Talk around function Double press Mute Up/Down button PTT button Short press Push to talk Channel mode Channel adjust Volume mode Volume adjust Section II:How To Connect to Bluetooth Accessories?
1Connect to Bluetooth PTT Turn-on the mobile radio, then press POWER key twice, a 'BEEP' will be heard. Long press the bluetooth PTT, red-green light flashing means the bluetooth PTT is now in pairing status 2Connect to Bluetooth speaker mic Turn-on the mobile radio, then press POWER key twice, a 'BEEP' will be heard. Turn on the bluetooth speaker mic, double press to enter pairing status. Section III:How To Edit the frequency Turn on the APP,Long press the channel square, then seclect Edit ChannelWhen you edit the completion channel parameters ,click saveto save the Channel Parameters. Section : Frequency display When the frequency setting is completed, make the phone horizontally display, and the frequency will be displayed on the map interface (the arrow up means TX and the arrow down means RX) Section VCreate internet channelFor Android only 1Turn on APPselectjoin network channel/create a new channel 2Create channel name and password. Free to join if no password 3Click SAVE Section Bind network channel For Android only 1Long press ID image, select Login , select Register to Register the account. 2Selectjoin network channel/join existing channelclickmagnifiericontype the channel name to join in. Enter the password if need. 3Long press on a channel square that you needed, select Bind network channel, then select the network channel you joined to bind Section Turn on Network repeater functionFor Android only 1. Under the network channel you are bound to, press and hold Relay Mode to realize network and analog communucation. (Note: To achieve network-analog communication, you must have the administrator qualification of the network group. If not, then no allow to operate) 2, Sync radio configmeans 'synchronous radio configuration', this function can synchronize the analog frequency of the network channel bound to the network channel into the same parameters
(with the consent of the members, please be cautious) Section Turn off radio after pairing Open the app, click on the POWER button and turn it to gray to turn off the radio. The next time you need to turn it on, open the app and click on POWER button again. Section Turn on/off signal TONE Long press the ID photo to enter the following interface:
Click Identification Informationto enable/disable signaling, if LocationOn, Signaling tone is coming with position Signal Section : Turn on audio relay Open the APP, enter the frequency page, click setting icon , select General Settings , turn on Audio relay to implement the audio relay function (this function does not depend on the network) ATTENTION: conditions of use!
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.