FCC ID: 2ARF9CSW630 Versa Cloud Services Access Point

1 2 1. CSW630 access point 2. Ceiling mounting plate Screw kit4 ceiling mount screws, 4 wall mount screws, and 4 plugs Quick Start Guide Cloud Services Access Point CSW630 Package Contents 3 3. Overview 1 2 3 4 5 1. Console port 2. 12 VDC power input 3. USB 2.0 port 4. Restart/Reset button 5. RJ-45 5G PoE PD ports 6. Kensington lock slot 6 1 Warning: For indoor use only. The access point, AC power adapter, and all connected cables are not for outdoor use. Mount the AP 1 a. Mounting on a Wall Installation Insert the two screws leaving at least 4.6 mm of clearance to install the AP. 2. With its ports facing up, slide the AP down onto the bracket until it is in its secured position. b. Mounting on a Suspended Ceiling T-Bar 1 2 1. At the installation location on the wall, use the ceiling mounting plate to mark two holes for the wall plugs and screws (included in the screw kit). Drill two holes for the wall plugs, and then insert the plugs and tap them flush with the wall surface. 1. Position the ceiling-mount clip holders on either side of the T-bar, and then turn the AP until the two clips lock it to the T-bar. 1 E112021-MR-R02 Note: The AP mounting supports two different sizes of suspended ceiling T-bars. The position illustrated above is for 24.5 mm bars. Use the position at a 90 degrees angle for 15 mm bars. c. Mounting on a Ceiling Tile 1 2 1. At the installation location on the ceiling, use the mounting plate to mark four holes on the tile for the screws (included in the screw kit). Drill four holes in the tile and insert the screws in the mounting plate leaving at least 4.6 mm of clearance to install the AP. 2. Slide the AP onto the screws until it snaps into its secured position. 2 Connect Power 1 1. Connect the AC power adapter to the power jack on the AP and then plug the adapter into a nearby AC power source. 3 Make Network Connections 1 Quick Start Guide Safety and Regulatory Information FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 56 cm between the radiator and your body. CE Statement This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 24 cm between the radiator and your body. The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. All operational modes:

2.4 GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ax (HE20), 802.11ax (HE40) 5 GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac

(VHT20), 802.11ac (VHT40), 802.11ac (VHT80), 802.11ax (HE20), 802.11ax (HE40), 802.11ax (HE80) BLE 2.4 GHz: 802.15.1 The frequency and maximum transmitted power limit in EU are listed as below:

1. Connect Category 5e or better cable to ETH1/5G/PoE or ETH2/5G/

PoE RJ-45 ports. 2412-2472 MHz: 20 dBm 5150-5350 MHz: 23 dBm 5500-5700 MHz: 30 dBm 2 AT BE BG CH CY CZ DE DK EE EL FR HR HU IE ES IS FI IT LI LT LU LV MT NL NO PL PT RO SE SI SK TR UK The abbreviations of the countries, as prescribed in above table, where any restrictions on putting into service or any requirements for authorization of use exist. CE Mark Declaration of Conformance for EMI and Safety (EEC) This information technology equipment is in compliance with the Directive 2014/53/EU and Directive 2014/35/EU. Radio Frequencies Warnings and Cautionary Messages Warning: This product does not contain any serviceable user parts. Warning: Installation and removal of the unit must be carried out by qualified personnel only. Warning: When connecting this device to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground line to prevent electrical hazards. Caution: Wear an anti-static wrist strap or take other suitable measures to prevent electrostatic discharge when handling this equipment. Caution: Do not plug a phone jack connector in the RJ-45 port. This may damage this device. Caution: Use only twisted-pair cables with RJ-45 connectors that conform to FCC standards. Radio Emissions Quick Start Guide Hardware Specifications AP Chassis Size (WxDxH) 240 x 240 x 64 mm (9.45 x 9.45 x 2.52 in.) Temperature Operating: 0 C to 40 C (32 F to 104 F) Storage: -20 C to 60 C (-4 F to 140 F) Humidity Operating: 5% to 95% (non-condensing) Network Interfaces Ports RJ-45 Port1: 5G, PoE PD RJ-45 Port2: 5G, PoE PD 2.4 GHz Radio IEEE 802.11b/g/n/ax 5 GHz Radio IEEE 802.11a/ac/n/ax 2.42.4835 GHz (US, ETSI) 5.155.25 GHz (lower band) US 5.7255.825 GHz (upper band) US, Europe 5.155.25 GHz, 5.255.35, 5.475.725 GHz Product Input Specifications Input Rating 12 VDC, 3 A 37-56 VDC, 1.07 A (PoE) Please contact your local supplier for more information about the power supply/adapter. Regulatory Compliances EN300 328 V2.2.2 (2019-07) EN301 893 V2.1.1(2017-05) 47 CFR FCC Part 15.247 47 CFR FCC Part 15.407 EN 301 489-1 V2.1.1 (2017-02) EN 301 489-17 V3.1.1 (2017-02) EN 55032:2015 AS/NZS CISPR 32:2015, Class B 47 CFR FCC Rules and Regulations Part 15 Subpart B, Class B Digital Device CB (IEC/EN60950-1 & IEC/EN 62368-1) UL/cUL (UL 60950-1 & CAN/CSA C22.2 No. 60950-1, UL 62368-1 & CAN/CSA C22.2 No. 62368-1) Safety 3

Versa Networks 6001 America Center Dr, 4th floor, Suite 400, San Jose, CA 95002 TEL: +1-408-385-7660 FAX: +1-408-385-7661 Date: 2021/7/21 FCC ID: 2ARF9CSW630 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

Schematics / Block Diagram Operational Description Software Operational Description Operational Description-Antenna Specification Part list Tune-up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Rahul Vaidya/ Sr. Product Manager Tel: +1-408-385-7660 Fax: +1-408-385-7661 E-mail: rahulvaidya@versa-networks.com Versa Networks 6001 America Center Dr, 4th floor, Suite 400, San Jose, CA 95002 TEL: +1-408-385-7660 FAX: +1-408-385-7661 Date: 2021/7/21 FCC ID: 2ARF9CSW630 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commissions rules, we request short-term confidential treatment for the following information until (2022/June/30) in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External photos Test Setup photos Users manual Internal Photos Sincerely yours, Rahul Vaidya/ Sr. Product Manager Tel: +1-408-385-7660 Fax: +1-408-385-7661 E-mail: rahulvaidya@versa-networks.com

Versa Networks 6001 America Center Dr, 4th floor, Suite 400, San Jose, CA 95002 TEL: +1-408-385-7660 FAX: +1-408-385-7661 Date: 2021/7/21 FCC ID: 2ARF9CSW630 AUTHORIZATION LETTER To Whom It May Concern:

Versa Networks hereby authorizes Amanda Wu of Bureau Veritas Consumer Products Services

(H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan), to act on its behalf in all matters relating to the Federal Communication Commission (FCC) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu of BV CPS Taoyuan on Versa Networkss behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours, Rahul Vaidya/Sr Product Manager Tel: +1-408-385-7660 Fax: +1-408-385-7661 E-mail: rahulvaidya@versa-networks.com

Versa Networks 6001 America Center Dr, 4th floor, Suite 400, San Jose, CA 95002 TEL: +1-408-385-7660 FAX: +1-408-385-7661 Date: 2021-09-08 FCC ID: 2ARF9CSW630 AUTHORIZATION LETTER To whom it may concern:

|, the undersigned Kumar Mehta of Versa Networks hereby authorize Rahul Vaidya of Versa Networks to act on my behalf in all matters relating to all processes required in FCC and any communication needed with the national authority. Any and all acts carried out by Rahul Vaidya on my behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you!

he b bel

Kumar Mehta Tel: +1-408-385-7660 Fax: +1-408-385-7661 E-mail: kumarbm@versa-networks.com

Versa Networks 6001 America Center Dr, 4th floor, Suite 400, San Jose, CA 95002 TEL: +1-408-385-7660 FAX: +1-408-385-7661 Date: 2021/7/21 FCC ID: 2ARF9CSW630 We, Versa Networks here declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

Rahul Vaidya/Sr. Product Manager Tel: +1-408-385-7660 Fax: +1-408-385-7661 E-mail: rahulvaidya@versa-networks.com