Smartphone Quick Start Guide Please Read Before Proceeding Product Safety Information 1 What's in the Box The phone packaging box should contain the following items and accessories:
Phone, Battery, Power Adapter, Quick Start Guide and USB cable. Notices for the Use of Your Phone Your phone should be treated with care. The following suggestions can help you extend the life of your mobile phone. 1Place the mobile phone and their parts and components out of reach of young children. 2Keep the phone dry. Rain, humidity and all types of liquids which contain minerals will corrode electronic circuits. 3Dont touch the phone with wet hands when charging, it will cause electric shock or damage the phone. 4Avoid placing the device in high temperature environments. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. 5Avoid placing the device in a low temperature environment. When the temperature rises, the phone will produce water vapor that may damage electronic circuits. 6Avoid placing the phone in dusty, dirty places, otherwise parts may be damaged. 7Avoid placing the phone near a lit cigarette, open flame or any heat source. 8Do not drop, knock or shake the phone. Rough handling can damage internal circuit boards. 9Do not paint the phone. The paint may block headphones, microphones or other removable parts, and cause them not to work. 10Use a clean, soft, dry cloth to clean the camera, light sensor lenses. Prohibit the use of harmful chemicals and cleaning agents to clean the phone. 11) Pacemaker manufacturers recommend that a minimum separation of 15 cm be maintained between a mobile phone and a pacemaker to avoid potential 2 interference with the pacemaker. To achieve this use the phone on the opposite ear to your pacemaker and do not carry it in a breast pocket. 12) Please consult your doctor and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device. 13) Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off two-way radios or electronic devices to avoid interfering with blasting operations. 14) There is a risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries according to the instructions. 3 Getting to Know Your Phone Charging USB Port Headset Jack Earpiece Camera Volume Keys Power Key Touch Screen Back key Menu key Home key Camera Camera Flash Speaker 4 Power Key Press and hold to turn on or off Aeroplane mode, enable Silent mode or Silent mode with Vibration, disable Silent mode, Power off or Restart the phone. Press to wake up or turn off the display. Home Key Touch to return to the home screen. Touch and hold to open the Google Assistant for Android (Go edition). Menu Key Touch to see recently used applications. Back Key Touch to go back to the previous screen. Volume Keys Press or hold to turn the volume up or down. Before Getting Started Removing the Back Cover Installing the SIM Card 5 Installing the Battery Installing a microSD Card (Not Included) NOTE: Some applications may require a microSD card to work normally or may store certain data on it. Therefore, it is recommended that you keep a microSD card installed and not remove or replace it randomly. 6 Basic Settings Your service provider may default some device settings, so you may not be able to change these settings. Network & Internet Wi-Fi to right to switch on WiFi. Swipe Wi-Fi Once its on, it will search for available WiFi networks automatically. Check whether the network has a password. Network without a password can be used directly, for others you will need to enter the password to use. NoteWi-Fi will switch off automatically when the phone is changed to flight mode, even if WiFi is on. Switch on WiFi again when the device is in flight mode, then the WiFi will work normally. Connected devices Bluetooth to right Swipe Bluetooth Bluetooth. The phone will search automatically for nearby bluetooth devices. Display to switch on Display a. Brightness level: Adjust the screen brightness b. Wallpaper: The gallery and built-in wallpaper can be set as standby and lock screen wallpaper. c. Sleep: Adjust the time allowed before the screen goes to sleep after inactivity. d. Advanced 1. Auto-rotate screen: On, Off. 2. Font size: Set the font size of the system 3. Display size: Set the display size of the screen. System 7 Languages & input 1) You can set up all the languages supported by the phone. 2) Keyboard Settings: You can set virtual keyboard and physical keyboard. Backup 1) Back up Apps and apps data, Call history, Contacts, Device settings, SMS to Google Drive. Date and Time 1) Automatic date & time: Use date and time provided by network. 2) Automatic time zone: Use time zone provided by network. 3) Set date: Set the current date. 4) Set time: Set the current time. 5) Select time zone: Select Time Zone according to where you are. 6) Use 24-hour format: ON/OFF About phone You can check the information on Wireless Update, Status, Legal information, Model & hardware, Android version, Android security patch level, RAM, Baseband version, Kernel version, Build number here. 8 Technical Specifications Network: GSM850/900/1800/1900 WCDMA900/2100 LTE B1/B3/B7/B20 Display: 5 Memory: 8GB ROM+1GB RAM Camera: 5MP+5MP FM/MP3/MP4/GPS/WiFi/Bluetooth/G-Sensor Battery Capacity: 2000mAh Li-ion
(*):The storage capacity actually available in the unit's internal memory may be less due to the preloaded operating system and / or other pre- installed or configured applications. Check the space actually available on your computer. FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pence in a residential instrotection against harmful interferallation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver. 9
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been evaluated to meet general RF exposure requirement. The device can be used in portabl e exposure condition without restriction. SAR Information Statement Your smartphone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the 10 limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.34 W/Kg and when worn on the body, as described in this user guide, is 0.38 W/Kg (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 0.40 W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/
oet/fccid after searching on FCC ID: 2AQPYIMOQ3PLUS Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. CE Declaration of conformity Herby, Verve Connect Ltd. declares that this smartphone, IMO Q3 Plus is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Use the smartphone in the environment with the temperature between -10 and 45 11 Use the earphone carefully. Excessive sound pressure from earphones and headphones can cause hearing loss. The product shall only be connected to a USB interface of version USB2.0 SAR: The device complies with RF specifications when the device is used at 5mm from your body. The highest SAR value for this mobile phone tested* is 0.574 W/Kg against the head and 0.369 W/kg at 5 mm from the body. Adapter shall be installed near the equipment and shall be easily accessible. The plug is considered as disconnect device of adapter Adapter Model: HL-0510B Input: AC 100-240V 50/60Hz 0.2A Output: DC 5.0V, 1000mA Adapter Model: HL-0510G Input: AC 100-240V 50/60Hz 0.2A Output: DC 5.0V, 1000mA 12 WIFI-For CE Operation frequency 2412MHz~2472MHz for
(802.11b/802.11g/802.11n(HT20)) 16.44dBm(conducted) WIFI Max power(2.4G) WIFI-For FCC Operation frequency 2412MHz~2462MHz for
(802.11b/802.11g/802.11n(HT20)) WIFI Max power(2.4G) BT/BLE-For CE Operation Frequency 14.56dBm(conducted) 2402MHz~2480MHz BT Max power 8.86dBm(conducted) BLE Max power 0.90dBm(conducted) BT/BLE-For FCC Operation Frequency 2402MHz~2480MHz BT Max power 5.71dBm(conducted) BLE Max power
-1.62dBm(conducted) 13 GSM Operation Frequency E-GSM 900/GPRS 900/EGPRS 900:
TX: 880-915MHz; RX: 925-960 MHz E-GSM 1800/GPRS 1800 TX: 1710-1785 MHz; RX: 1805-1880 MHz E-GSM 850/GPRS 850 TX: 824-849 MHz; RX: 869-894 MHz E-GSM 1900/GPRS 1900 TX: 1850-1910 MHz; RX: 1930-1990 MHz Max power(E-GSM 900) Max power(DCS 1800) Max power(E-GSM 850) Max power(DCS 1900) 33.1dBm(conducted) 30.1 dBm(conducted) 32.7dBm(conducted) 29.8dBm(conducted) 14 WCDMA-For CE Operation Frequency Band 1: TX:1920MHz~1980MHz;
RX: 2110-2170MHz Band 8: TX: 880MHz~915MHz;
RX: 925-960MHz Max power(Band 1) 22.31 dBm(conducted) Max power(Band 8) 22.45 dBm(conducted) LTE-For CE Operation Frequency:
Band 1: (UL)1920MHz~1980MHz,
(DL) 2110MHz~2170MHz Band 3: (UL)1710MHz~1785MHz,
(DL)1805MHz~1880MHz Band 7: (UL)2500MHz~2570MHz,
(DL)2620MHz~2690MHz Band 20: (UL)832MHz~862MHz,
(DL) 791MHz~821MHz Max power(Band 1) 22.92dBm(conducted) 15 Max power(Band 3) Max power(Band 7) Max power(Band 20) FM Operation Frequency:
GPS/GLONASS Operation Frequency:
23.02dBm(conducted) 23.13dBm(conducted) 23.08 dBm(conducted) 87.5MHz-108MHz 1.57542GHz Manufacturer: Verve Connect Ltd. Address:59 Church Street, Staines, TW18 4XS, United Kingdom Tel: 07960212989 Fax: N/A E-mail: sheila.wang@verveconnect.co.uk For the detailed User Manual or more 16 information about the product, please visit:
www.imomobile.co.uk Google, Android and other marks are trademarks of Google LLC. 17 Verve Connect Ltd. 59 Church Street, Staines, TW18 4XS, United Kingdom www.imomobile.co.uk Charger manufactured by:
SiChuan Honglong Electronic Co.Ltd., NO.36, Jingang Road, luohan street, Longmatan Area, Luzhou City, Sichuan Province 18