all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.16 MiB | February 02 2023 | |||
1 |
|
Internal Photos | Internal Photos | 542.74 KiB | February 02 2023 | |||
1 |
|
External Photos | External Photos | 612.52 KiB | February 02 2023 | |||
1 |
|
Label and Label Locations | ID Label/Location Info | 326.20 KiB | February 02 2023 | |||
1 |
|
Antenna Specification | Test Report | 495.17 KiB | February 02 2023 | |||
1 | Block Diagram | Block Diagram | February 02 2023 | confidential | ||||
1 |
|
FCC Agent Authorization | Cover Letter(s) | 30.19 KiB | February 02 2023 | |||
1 |
|
FCC Long Term Confidentiality Letter | Cover Letter(s) | 35.90 KiB | February 02 2023 | |||
1 |
|
Model Differences Letter | Attestation Statements | 409.19 KiB | February 02 2023 | |||
1 | Operational Description | Operational Description | February 02 2023 | confidential | ||||
1 |
|
RF Exposure | RF Exposure Info | 223.80 KiB | February 02 2023 | |||
1 | Schematics | Schematics | February 02 2023 | confidential | ||||
1 |
|
Test Report | Test Report | 4.74 MiB | February 02 2023 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 392.39 KiB | February 02 2023 |
1 | User Manual | Users Manual | 1.16 MiB | February 02 2023 |
Each of the 10 experiences can be enjoyed at 10 speeds. Press the buttons to control the speed of each mode. and Press the time to unpause. When paused, the LEDs will slowly button to pause any mode. Press the button a second BLUE. WARNINGS DO NOT BLOCK VENT ELECTRICAL WARNING Modes appear as single blue lights. Speeds appear as green lights. Flashing RED LEDs indicate the motor has temporarily overheated and the machine will stop. If this happens, turn and wait 10 minutes before trying to operate it again. the machine STEP 5 You must apply a water-based lubricant both to your penis and to the interior of the sleeve prior to use. Every 10 minutes during use, apply more lubricant. DO NOT USE SILICONE LUBRICANT AS IT WILL DAMAGE THE SLEEVE MATERIAL. STEP 6 the machine before removing the sleeve. To remove Turn the sleeve, gently pull it in an upwards direction. INSTRUCTION MANUAL EN DE DK ES FR IT NL RU SE STOP TURNING THE SCREW AS SOON AS YOU ENCOUNTER RESISTANCE. THIS IS AN ELECTRICAL APPLIANCE. DO NOT USE IN OR NEAR WATER. INJURY OR DEATH MAY RESULT. THIS DEVICE MUST BE USED IN CONJUNCTION WITH AN AUTOBLOW A.I. SLEEVE. DO NOT USE THE PRODUCT WITHOUT A SLEEVE INSTALLED OR INJURY MAY RESULT. THIS PRODUCT MAY MALFUNCTION IN AN ENVIRONMENT WITH AN ELECTROSTATIC DISCHARGE. IN THAT CASE, RESET IT BY TURNING THE POWER OFF AND THEN ON AGAIN. WARRANTY Autoblow warrants that the electrical parts and motor of Autoblow A.I. are covered for a period of one (1) year. The warranty is from the date of original purchase, against defects due to faulty workmanship or materials. The warranty covers the main body of the Autoblow A.I. product only, provided it has not been tampered with, or taken apart. The warranty does not cover the reusable sleeve. The warranty does not cover cosmetic deterioration caused by normal wear and tear. The warranty also does not cover damage caused by accident, misuse, or neglect. Any attempt to open or take apart the Autoblow A.I. will void the warranty. STEP 1 EN STEP 7 Connect the power supply cable to the bottom of Autoblow A.I. and plug it into any electrical outlet (120v-240v). The device must remain plugged into the wall outlet during use. Pour out any liquid from inside the sleeve and then wash it using soap and warm water. Spray a sex toy cleaner into the sleeve and then rinse it again. 7 SOAP STEP 2 Move the slider to the ON position. The gripper will then move to the top position. STEP 3 Follow the actions in the drawings to insert the sleeve into the gripper. Use the supplied white plastic stick to assist sleeve insertion. The sleeve will be properly seated when the sleeves bottom ridge rests below the gripper, and its top ridge sits above the gripper. THE MACHINE MUST BE USED WITH SLEEVE INSERTED OR INJURY MAY RESULT. STEP 4 To dry the interior of the sleeve, insert a paper towel or small fabric towel and twist it several times in a downward manner to help soak up any water remaining inside. DO NOT ATTEMPT TO TURN THE SLEEVE INSIDE OUT. IT MAY TEAR. STEP 8 NEVER submerge the Autoblow A.I. in water. Use a damp cloth to clean its exterior surfaces only. Store the machine in a cool dry place out of direct sunlight. To extend the life of your Autoblows sleeve and to maintain its silky texture, dust the sleeve with corn starch after cleaning it and store the sleeve in a sealed plastic bag. WARNINGS Press the again to cycle through the 10 button to activate mode 1 and press it modes. DO NOT BLOCK THE AIR EXHAUST VENT ON THE BOTTOM OF THE MACHINE. WARNING:
EN EN LEGAL Very Intelligent Ecommerce 2022 All Rights Reserved. Autoblow A.I. is patented. trademark of Very Intelligent Ecommerce, Inc. Autoblow A.I. is a novelty only and has no therapeutic or medical application. Contact us at support@vieci.com registered Autoblow is a ADVANCED FEATURES GUIDANCE HOW TO CHANGE THE SIZE OF THE PENIS GRIPPER Your Autoblow AI+ is equipped with an adjustable penis gripper. Using a Phillips-head screwdriver, you can adjust it between 47mm to 53mm. On new devices, the gripper is set at 50mm. To adjust the gripper to your preferred tightness level, you must remove the sleeve and insert a screwdriver through the hole and into the Phillips-head screw attached to the gripper. Twist counter-clockwise to tighten the gripper or clockwise to widen the gripper. HOW TO ACCESS INTERNET ENABLED FEATURES Your Autoblow AI+ is capable of connecting to the Internet and accessing a suite of web-enabled features including remote control, downloadable blowjob experiences, voice control (beta), and more. To view the Internet connection instructions including a video walkthrough, please visit Autoblowme.com or simply scan this QR CODE using a phone or tablet:
EN SCHRITT 1 DE SCHRITT 7 DE Schlieen Sie das Stromversorgungskabel an der Unterseite des Autoblow A.I. an und stecken Sie es in eine Steckdose (120v-240v). Das Gert muss whrend des Betriebs an der Steckdose angeschlossen bleiben. SCHRITT 2 Bewegen Sie den Schieber in die Position ON. Der Greifer bewegt sich dann in die oberste Position. SCHRITT 3 Folgen Sie den Anweisungen in den Zeichnungen, um die Hlse in den Greifer einzusetzen. Verwenden Sie den mitgelieferten weien Die Hlse sitzt richtig, wenn der untere Grat der Hlse unter dem Greifer liegt und sein oberer Grat ber dem Greifer sitzt. um das Einfhren der Hlse zu erleichtern. DIE MASCHINE MUSS DER EINGESETZTEN HLSE VERWENDET WERDEN ODER ES KNNEN VERLETZUNG ENTSTEHEN. SCHRITT 4 Gieen Sie Flssigkeit aus dem Inneren der Hlse aus und waschen Sie sie anschlieend mit Seife und warmem Wasser ab. Sprhen Sie einen Sexspielzeugreiniger in die Hlse und splen Sie sie dann erneut aus. Um das Innere der Hlse zu trocknen, stecken Sie ein Papiertuch oder ein kleines nach unten, um das darin enthaltene Wasser aufzusaugen. hinein und drehen Sie es mehrmals VERSUCHEN SIE NICHT, DIE HLSE NACH INNEN ZU DREHEN. SIE KANN ZERREISSEN. SCHRITT 8 NIEMALS den Autoblow A.I. in Wasser eintauchen. Verwenden Sie nur ein feuchtes Tuch, um damit die zu reinigen. Bewahren Sie das Gert an einem khlen, trockenen Ort ohne direkte Sonneneinstrahlung auf. Um die Lebensdauer der Hlse Ihres Autoblow zu verlngern und seine seidige Textur beizubehalten, bestuben Sie die Hlse nach der Reinigung mit Maisstrke und bewahren Sie sie in einem verschlossenen Plastikbeutel auf. Drcken Sie um die 10 verschiedenen Modi zu durchlaufen.
, um Modus 1 zu aktivieren, und erneut, WARNUNGEN Jeder der 10 Modi kann mit 10 Geschwindigkeiten genossen werden. Drcken Sie die Tasten die Geschwindigkeit der einzelnen Modi einzustellen. und
, um Drcken Sie die Taste Drcken Sie die Taste beenden. Im Pausemodus blinken die LEDs langsam BLAU.
, um einen beliebigen Modus anzuhalten. ein zweites Mal, um die Wiedergabe zu Die Modi erscheinen als einzelne blaue Lichter. Geschwindigkeiten erscheinen als grne Lichter. Blinkende ROTE LEDs zeigen an, dass der Motor vorbergehend berhitzt ist und die Maschine stoppt. Schalten Sie in diesem Fall das Gert aus und warten Sie 10 Minuten, bevor Sie es erneut bedienen. SCHRITT 5 Sie mssen vor der Verwendung ein Gleitmittel auf Wasserbasis sowohl auf Ihren Penis als auch auf das Innere der Hlse auftragen. Tragen Sie whrend des Gebrauchs alle 10 Minuten erneut Gleitmittel auf. VERWENDEN SIE KEIN GLEITMITTEL MIT SILIKON, DA DAS MATERIAL DER HLSE BESCHDIGT WERDEN KANN. SCHRITT 6 Schalten Sie die Maschine aus, bevor Sie die Hlse entfernen. Um die Hlse zu entfernen, ziehen Sie sie vorsichtig nach oben. BLOCKIEREN SIE NICHT DIE LUFTAUSLASS AN DER UNTERSEITE DER MASCHINE. DIES IST EIN ELEKTRISCHES GERT. NICHT IN WASSER EINTAUCHEN ODER IN DER NHE VON WASSER VERWENDEN. ES KANN ZU VERLETZUNGEN ODER TOD KOMMEN. DIESE VORRICHTUNG MUSS IN VERBINDUNG MIT EINER AUTOBLOW A.I. HLSE VERWENDET WERDEN. BETREIBEN SIE DAS PRODUKT NICHT OHNE INSTALLIERTE HLSE, DA ES SONST ZU VERLETZUNGEN KOMMEN KANN. IN EINER UMGEBUNG MIT ELEKTROSTATISCHER ENTLADUNG KANN ES ZU FEHLFUNKTIONEN DES GERTS KOMMEN. SETZEN SIE ES IN DIESEM FALL ZURCK, INDEM SIE DAS GERT AUS- UND WIEDER EINSCHALTEN. GARANTIE Autoblow garantiert, dass die elektrischen Teile und der Motor von Autoblow A.I. fr ein (1) Jahr gedeckt sind. Die Garantie gilt ab dem Datum des ursprnglichen Kaufs gegen Mngel aufgrund fehlerhafter Verarbeitung oder Materialien. Die Garantie deckt den Hauptkrper des Autoblow A.I. Produkts nur ab, sofern es nicht manipuliert oder zerlegt wurde. Die Garantie gilt nicht fr die wiederverwendbare Hlle. Die Garantie deckt keine kosmetischen Schden ab, die durch normale Abnutzung verursacht werden. Die Garantie deckt auch keine Schden ab, die durch Unfall, Missbrauch oder Nachlssigkeit verursacht wurden. Jeder Versuch, Autoblow A.I. zu oder zu zerlegen, lsst die Garantie erlschen. DK DK Alle rettigheder er forbeholdt Very Intelligent Ecommerce 2022. Autoblow A.I. er patentanmeldt. Autoblow er et registreret varemrke fra Very Intelligent Ecommerce, Inc. Autoblow A.I. er udelukkende en gadget og har ingen terapeutisk eller medicinsk anvendelse. Kontakt os p support@vieci.com AVANCERET FUNKTIONS VEJLEDNING NDRING AF STRRELSEN P PENISGRIBEREN Din Autoblow AI+ er udstyret med en justerbar penisgriber. Ved hjlp af en Philips-skruetrkker kan du justere den mellem 47 mm og 53 mm. P nye enheder er griberen indstillet til 50 mm. For at justere griberen til dit foretrukne stramheds niveau, skal du fjerne hylsteret og stikke en skruetrkker gennem hullet og ind i Philips-hovedskruen, der er fastgjort til griberen. Drej mod uret for at stramme griberen eller med uret for at udvide griberen. F ADGANG TIL DE INTERNETAKTIVEREDE FUNKTIONER Din Autoblow AI+ kan oprette forbindelse til internettet og f adgang til en rkke web-aktiverede funktioner, herunder fjernbetjening, blowjob-oplevelser, der kan downloades, stemmestyring (beta) og mere. Besg Autoblowme.com eller scan denne QR-KODE ved hjlp af en telefon eller tablet for at se instruktionerne til internetforbindelsen inklusive en videogennemgang:
Very Intelligent Ecommerce, Inc., erklrer, at denne enhed er i overensstemmelse med de vsentlige krav og andre relevante bestemmelser i direktiv 2014/53/EU. IMPRESSUM Very Intelligent Ecommerce 2022 All Rights Reserved. Alle Rechte vorbehalten. Autoblow A.I. ist zum Patent angemeldet. Autoblow ist eine eingetragene Marke von Very Intelligent Ecommerce, Inc. Autoblow A.I. ist nur eine Neuheit und hat keine therapeutische oder medizinische Anwendung. Kontaktieren Sie uns unter support@vieci.com DE DE SO GREIFEN SIE AUF INTERNETFHIGE FUNKTIONEN ZU Ihr Autoblow AI+ ist in der Lage, sich mit dem Internet zu verbinden und auf eine Reihe von webfhigen Funktionen zuzugreifen, wie z.B. Fernsteuerung, herunterladbare Blowjob-Erlebnisse, Sprachsteuerung
(Beta) und mehr. Um die Anweisungen fr die Internetverbindung einschlielich einer Videoanleitung zu sehen, besuchen Sie bitte Autoblowme.com oder scannen Sie einfach diesen QR CODE mit einem Telefon oder Tablet:
ANLEITUNG FR ERWEITERTE FUNKTIONEN SO NDERN SIE DIE GRE DES PENIS-GREIFRINGS Ihr Autoblow AI+ ist mit einem verstellbaren Penis-Greifring ausgestattet. Mit einem Kreuzschlitzschraubendreher knnen Sie ihn zwischen 47 mm und 53 mm einstellen. Bei neuen Gerten ist der Greifring auf 50 mm eingestellt. Um den Greifring auf die von Ihnen bevorzugte Enge einzustellen, mssen Sie den rmel entfernen und einen Schraubendreher durch das Loch in die Kreuzschlitzschraube am Greifring stecken. Drehen Sie die Schraube gegen den Uhrzeigersinn, um den Greifring zu verengen, oder im Uhrzeigersinn, um den Greifring zu weiten. WARNUNG:
HREN SIE AUF, DIE SCHRAUBE ZU DREHEN, SOBALD SIE AUF WIDERSTAND STOSSEN. Very Intelligent Ecommerce, Inc. erklrt, dass dieses Gert den grundlegenden Anforderungen und anderen relevanten Bestimmungen der Richtlinie 2014/53/EU entspricht. TRIN 1 DK TRIN 7 DK JURIDISK NOTITS Forbind strmforsyningskablet til bunden af Autoblow A.I. og tilslut enheden til en stikkontakt (129v-240v). Enheden skal vre tilsluttet stikkontakten under brug. Hld enhver vske ud af mundstykket og vask det med sbe og varmt vand. Spray et rensemiddel til sexlegetj i mundstykket og skyld det igen. TRIN 2 Sl kontakten over p ON-indstillingen. Grebsenheden vil derefter sig til toppositionen. TRIN 3 Flg vejledningen der er angivet p tegningen, for at indstte mundstykket i grebsenheden. Brug den medflgende hvide plastikpind til at indstte mundstykket. Mundstykket vil vre korrekt indsat nr mundstykkets bundkant hviler under grebsenheden og topkanten sidder over grebsenheden. MASKINEN SKAL BRUGES MED INDSAT MUNDSTYKKE, ELLERS KAN SKADER FOREKOMME. TRIN 4 Tryk p at g videre gennem de 10 andre tilstande. for at aktivere tilstand 1 og tryk igen for Hver af de 10 tilstande kan nydes i 10 hastigheder. Tryk p og knapperne for at styre hver tilstands hastighed. Tryk p -knappen for at stte enhver tilstand p pause. Tryk p -knappen igen for at sl pausetilstanden fra. Nr enheden er sat p pause, vil LED-indikatoren blinke BLT langsomt. Tilstande vises som enkeltlys i bl. Hastigheder vises som grnne lys. Blinkende RDE LED-lys indikerer at motoren er midlertidigt overophedet og at maskinen vil stoppe. Hvis dette sker, skal du slukke for maskinen og vente i 10 minutter, fr du prver at bruge den igen. TRIN 5 Du skal bruge en vandbaseret glidecreme p bde din penis og indersiden af mundstykket, fr du pbegynder brug. For hver 10 minutters brug, skal du pfre mere glidecreme. BRUG IKKE SILIKONEGLIDECREME, DA DET DELGGER MUNDSTYKKETS MATERIALE. TRIN 6 Sluk for maskinen fr du at mundstykket i en opadgende retning. mundstykket, skal du forsigtigt trkke mundstykket. For For at trre indersiden af mundstykket, skal du indfre en papirserviet eller et lille hndklde og dreje det rundt at det resterende vand inde i mundstykket. gange, mens du forsigtigt presser nedad, for LAD VR MED AT PRVE AT VENDE MUNDSTYKKET P VRANGEN. DET KAN G I STYKKER. TRIN 8 Put ALDRIG Autoblow A.I. i vand. Brug kun en fugtig Opbevar klud til at rengre enhedens ydre maskinen p et kligt, trt sted vk fra direkte sollys. For at forlnge levetiden p din Autoblowers mundstykke og for at vedligeholde mundstykkets silkeagtige tekstur, skal du drysse majsstivelse p mundstykket efter rengring og opbevare mundstykket i en forseglet plastpose. ADVARSLER ADVARSEL:
STOP MED AT DREJE SKRUEN, S SNART DU FLER MODSTAND. BLOKR IKKE LUFTUDLEDNINGEN I BUNDEN AF MASKINEN. DETTE ER ET ELEKTRISK APPARAT. BRUG IKKE I ELLER NR VAND. DETTE KAN FRE TIL SKADER ELLER DD. DENNE ENHED SKAL ANVENDES MED ET AUTOBLOW A.I.-
MUNDSTYKKE. BRUG IKKE PRODUKTET UDEN ET INDSAT MUNDSTYKKE, DA DETTE KAN RESULTERE I SKADE. DETTE PRODUKT KAN FORRSAGE FUNKTIONSFEJL I ET MILJ MED ELEKTROMAGNETISK AFSPNDING. I S FALD SKAL DU NULSTILLE PRODUKTET VED AT SLUKKE FOR STRMMEN OG DEREFTER TNDE DET IGEN. GARANTI Autoblow garanterer at de elektriske dele og motoren i Autoblow A.I. er dkket af garantien i en periode p t (1) r. Garantien glder fra den oprindelige kbsdato, og glder mod fejl p grund af mangelfuld produktion eller materialer. Garantien dkker kun hoveddelen af Autoblow A.I.-produktet, forudsat at denne ikke er blevet pillet ved eller skilt ad. Garantien dkker ikke det genanvendelige mundstykke. Garantien dkker ikke kosmetisk forringelse forrsaget af normal slitage. Garantien dkker heller ikke skade forrsaget af uheld, forkert brug eller forsmmelse. Ethvert forsg p at bne eller adskille Autoblow A.I. vil bryde garantien. PASO 1 Conecte el cable de la fuente de alimentacin a la parte inferior del Autoblow A.I. y enchfelo a cualquier toma elctrica
(120v-240v). Mantenga el dispositivo enchufado durante su uso. PASO 2 Deslice el interruptor a la posicin ON. Entonces, el manguito se mover a la posicin superior. PASO 3 Siga las acciones de los dibujos para insertar la funda en el manguito. Utilice el palillo de plstico blanco incluido para ayudarse a insertar la funda. Estar correcta cuando el reborde inferior de la funda quede debajo del manguito y el superior quede sobre el manguito. EL DISPOSITIVO SE DEBE UTILIZAR CON LA FUNDA PUESTA O SE PUEDEN PRODUCIR LESIONES. PASO 4 Presione nuevo para recorrer los 10 modos diferentes. para activar el modo 1 y presinelo de Cada uno de los 10 modos consta de 10 velocidades. Presione para controlar la velocidad de cada modo. los botones y Presione el botn presinelo nuevamente para reanudar. Si est pausado, las luces LED parpadearn lentamente en AZUL. para pausar cualquier modo y Cada modo aparece con una luz azul. Las velocidades aparecen con luces verdes. Si el motor se sobrecalienta temporalmente, las luces LED ROJAS parpadearn y el dispositivo se detendr. Cuando esto ocurra, apague el dispositivo y espere 10 minutos antes de utilizarlo. PASO 5 Debe aplicar un lubricante a base de agua tanto en su pene como en el interior de la funda antes de usarlo. Cada 10 minutos durante el uso, aplique ms lubricante. NO UTILICE LUBRICANTE DE SILICONA PORQUE DAAR EL MATERIAL DE LA FUNDA. PASO 6 Apague el dispositivo antes de extraer la funda. Para retirar la funda, tire de ella suavemente hacia arriba. ES PASO 7 ES LEGAL Saque cualquier lquido que haya al interior de la funda y luego lvela con jabn y agua tibia. Roce un limpiador de juguetes erticos en la funda y luego enjuguela nuevamente. Para secar el interior de la funda, inserte una toalla de papel o una toallita de tela y grela varias veces hacia abajo para ayudar a absorber el agua que an permanezca dentro. NO INTENTE VOLTEAR LA FUNDA AL REVS. PODRA ROMPERSE. PASO 8 NUNCA sumerja el Autoblow A.I. en agua. Use un pao hmedo para limpiar solo las en un lugar fresco y seco, lejos de la luz solar directa. exteriores. Guarde el dispositivo Para prolongar la vida til de la funda de su Autoblow y mantener su textura sedosa, despus de limpiarla, espolvorela con almidn de maz y gurdela en una bolsa de plstico sellada. Very Intelligent Ecommerce 2022 Todos los derechos reservados. Autoblow es una marca registrada de Very Intelligent Ecommerce, Inc. Autoblow A.I. est pendiente de patente, es una innovacin y no tiene aplicacin teraputica ni mdica. Contctenos al support@vieci.com GUA DE FUNCIONES AVANZADAS CMO CAMBIAR EL TAMAO DE LA PINZA DEL PENE Su Autoblow AI + est equipado con una pinza de pene ajustable. Si utiliza un destornillador Philips, puede ajustarla entre 47 mm y 53 mm. En dispositivos nuevos, la pinza est establecida en 50 mm. Para ajustar la pinza a su nivel de tensin preferido, debe quitar el molde de silicona e insertar un destornillador a travs del orificio y en la cabeza del tornillo Philips adjunto a la pinza. Gire hacia la izquierda para apretar la pinza o hacia la derecha para ensanchar la pinza. ADVERTENCIAS NO BLOQUEE LA SALIDA DE AIRE EN LA PARTE INFERIOR DEL DISPOSITIVO. ADVERTENCIA:
DEJE DE GIRAR EL TORNILLO TAN PRONTO COMO HAGA RESISTENCIA. ESTO ES UN APARATO ELCTRICO. NO LO UTILICE DENTRO NI CERCA DEL AGUA. PUEDE GENERAR LESIONES O LA MUERTE. ESTE DISPOSITIVO DEBE SER UTILIZADO JUNTO CON UNA FUNDA AUTOBLOW A.I. NO UTILICE EL PRODUCTO SIN UNA FUNDA INSTALADA O PUEDEN OCURRIR LESIONES. ESTE PRODUCTO PUEDE FUNCIONAR MAL EN UN ENTORNO CON UNA DESCARGA ELECTROSTTICA. EN ESE CASO, REINCIELO APAGNDOLO Y ENCINDALO NUEVAMENTE. GARANTA Autoblow garantiza que las partes elctricas y el motor de Autoblow A.I. estn cubiertos por un perodo de un (1) ao. La garanta comienza a partir de la fecha de compra original, contra defectos de fabrica o materiales defectuosos. La garanta solo cubre el cuerpo principal del producto Autoblow A.I., siempre que no haya sido manipulado o desarmado. La garanta no cubre la funda reutilizable. La garanta no cubre el deterioro cosmtico causado por el desgaste normal. La garanta tampoco cubre los daos causados por accidentes, mal uso o negligencia. Cualquier intento de abrir o desmontar el Autoblow A.I. anular la garanta. ES ES FR FR CMO ACCEDER A LAS FUNCIONES HABILITADAS PARA INTERNET TAPE 1 Su Autoblow AI + puede conectarse a Internet y acceder a un conjunto de funciones habilitadas para la web que incluyen control remoto, experiencias de mamadas descargables, control por voz (en fase beta) y ms. Para ver las instrucciones de conexin a Internet, incluido un video tutorial, visite Autoblowme.com o simplemente escanee este CDIGO QR con un telfono o tableta:
Branchez le cble dalimentation en bas de lAutoblow I.A. et raccordez-le une prise lectrique (120v-240v). Lappareil doit rester branch pendant lutilisation. TAPE 2 Faites coulisser linterrupteur en mode marche. Le gripper coulissera alors vers le haut de lappareil. TAPE 3 dinsrer ltui dans le gripper. Suivez le schma pas pas Utilisez le btonnet en plastique blanc fourni linsertion de ltui. Ltui sera correctement mis en place lorsque la bordure infrieure de ltui est appuye en-dessous du gripper, tandis que sa bordure suprieure se trouve au-dessus du gripper. de faciliter Very Intelligent Ecommerce, Inc. declara que este dispositivo cumple con los requisitos esenciales y otras disposiciones relevantes de la Directiva 2014/53/EU. LAPPAREIL DOIT TRE UTILIS AVEC LTUI INSR SOUS RISQUE DE BLESSURE. TAPE 4 pour activer le mode 1. Appuyez Appuyez sur nouveau pour passer au mode suivant, vous pouvez ainsi faire les 10 modes Vous pouvez Appuyez sur 10 vitesses contrler la vitesse de chaque mode. de chacun de ces 10 modes pour et Appuyez sur le bouton en pause. Appuyez une deuxime fois sur le bouton continuer. En pause, les LEDs clignoteront lentement en bleu. pour mettre nimporte quel mode pour Les modes sont reprsents par des lumires bleues individuelles, tandis que la vitesse est reprsente par des lumires vertes. Si les LEDs rouges clignotent, cela et que lappareil temporairement en situation de va sarrter. Si cest le cas, teignez puis rallumez lappareil, et attendez 10 minutes avant dessayer de vous en servir nouveau. que le moteur est TAPE 5 Vous devez employer un et sur lintrieur de ltui avant de lutiliser. Pendant lutilisation, appliquez davantage de base deau et sur votre pnis toutes les dix minutes. NEMPLOYEZ PAS DE LUBRIFIANT BASE DE SILICONE QUI ENDOMAGERAIT LE MATRIAU DE LTUI. TAPE 6 teignez lappareil avant dter ltui de lappareil. Pour sortir ltui, tirez doucement vers le haut. TAPE 7 Videz tout liquide contenu dans ltui, puis nettoyez-le au savon et leau chaude. Aspergez lintrieur de ltui avec un nettoyant pour accessoires rotiques puis rincez-le nouveau. Pour scher lintrieur de ltui, glissez-y une serviette en papier ou une petite serviette en tissus et faites-la tourner plusieurs fois vers de parvenir absorber toute leau qui pourrait y rester. le bas NE PAS ESSAYER DE RETOURNER LTUI CAR CELUI-CI POURRAIT SE DCHIRER. TAPE 8 Ne JAMAIS plonger lAutoblow I.A. dans leau. Utilisez un humide pour nettoyer uniquement lextrieur de lappareil. Rangez lappareil labri du soleil dans un endroit frais et sec. de prolonger la dure de vie de votre tui Autoblow et pour prserver sa texture soyeuse, saupoudrez ltui de fcule de mas aprs lavoir nettoye, et rangez-
la dans un sac en plastique hermtique. WARNINGS NE BLOQUEZ PAS LA CIRCULATION DE LAIR DE LA BOUCHE DARATION SITUE EN BAS DE LAPPAREIL. CET APPAREIL EST LECTRIQUE. NE PAS UTILISER DANS OU PRS DE LEAU. DES BLESSURES OU LA MORT POURRAIT SURVENIR. CETTE APPAREIL DOIT TRE UTILIS AVEC UN TUI AUTOBLOW I.A. NUTILISEZ PAS LAPPAREIL DOIT TRE UTILIS SANS LTUI INSR SOUS RISQUE DE BLESSURE. CE PRODUIT PEUT MAL FONCTIONNER DANS UN ENVIRONNEMENT AVEC UNE DCHARGE LECTROSTATIQUE. DANS CE CAS, RINITIALISEZ-LE EN COUPANT PUIS EN RALLUMANT L'ALIMENTATION. GARANTIE Autoblow garantie que les pices lectriques et le moteur de lAutoblow I.A. sont couverts pendant une priode dun (1) an. Cette garantie est valable partir de la date dachat initial, et stend aux dfauts dus une construction dfectueuse ou un mauvais matriau. La garantie ne couvre que le corps de lappareil, tant que lappareil na pas t modifi ou dmont. La garantie ne sapplique pas ltui rutilisable. La garantie ne sapplique pas aux dgts esthtiques dus une usure normale. La garantie ne sapplique pas non plus en cas daccident, de mauvais emploi ou de ngligence. Toute tentative douvrir ou de dmonter lAutoblow I.A. annulera sa garantie. 1 2 3 4 5 10 min 6 PAUSE SPEED UP SPEED DOWN START/CHANGE MODE ON/OFF MODE (BLUE) SPEEDS (GREEN) FR FR COMMENT ACCDER AUX FONCTIONS COMPATIBLES AVEC INTERNET PASSO 1 IT PASSO 7 IT LEGALE IT IT NL COME ACCEDERE ALLE FUNZIONALIT ABILITATE AD INTERNET STAP 1 FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. JURIDIQUE Very Intelligent Ecommerce 2022 Tous Droits Rservs. La demande de brevet dAutoblow I.A. a t dpose. Autoblow est une marque dpose de Very Intelligent Ecommerce, Inc. Autoblow I.A. est simplement une innovation sans applications thrapeutique ou mdicale. Contactez-nous support@vieci.com MODE DEMPLOI DES FONCTIONS AVANCES COMMENT MODIFIER LA TAILLE DU DISPOSITIF DE COMPRESSION INTERNE?
Votre Autoblow AI+ est quip d'un dispositif de compression interne rglable. l'aide d'un tournevis cruciforme, vous pouvez le rgler entre 47 mm et 53 mm. Sur les nouveaux appareils, le dispositif est rgl sur 50 mm. Pour rgler la pince votre niveau de pression souhaite, vous devez retirer le manchon et insrer un tournevis dans le trou et dans la tte de la vis cruciforme fixe au dispositif interne. Tournez dans le sens inverse des aiguilles d'une montre pour resserrer le dispositif ou dans le sens des aiguilles d'une montre pour l'largir. Votre Autoblow AI+ est capable de se connecter Internet et d'accder une srie de fonctions accessibles depuis le Web, notamment la tlcommande, des expriences de fellation tlchargeables, la commande vocale (bta), et plus encore. Pour accder aux instructions de connexion Internet, y compris une vido, rendez-vous sur Autoblowme.com ou scannez simplement ce code QR avec un tlphone ou une tablette:
Collegare il cavo alla parte inferiore dellAutoblow A.I. e collegare lalimentatore alla presa elettrica (120v-240v). Il dispositivo deve rimanere collegato alla presa durante lutilizzo. PASSO 2 Spostare linterruttore sulla posizione ON. La pinza si muover nella posizione superiore. PASSO 3 Seguire le illustrazioni per inserire la guina nella pinza. Utilizzare il bastoncino bianco per inserire la guaina. La guaina sar posizionata correttamente quando lanello inferiore sar sotto la pinza e lanello superiore sar sopra. DURANTE LUTILIZZO LA GUAINA DEVE ESSERE INSERITA, IN CASO CONTRARIO PORTA LESIONI. PASSO 4 Premere per attivare a ciclo le 10 diverse modalit. per attivare la modalit 1 e premere ancora Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. AVERTISSEMENT:
ARRTEZ DE TOURNER LA VIS DS QUE VOUS RENCONTREZ UNE RSISTANCE. DCLARATION DE CONFORMIT EU Very Intelligent Ecommerce, Inc. dclare que cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU. Ognuna delle 10 modalit pu essere impostata a 10 diverse velocit. Premere i pulsanti per controllare la velocit di ogni modalit. e Premere il pulsante Premere il pulsante Quando in pausa, il LED ha una luce intermittente BLU. per mettere in pausa la modalit. una seconda volta per togliere la pausa. Le modalit sono indicate con una luce Le velocit sono indicate con luci verdi. blu. I LED con una luce intermittente ROSSA indicano che il motore si surriscaldato e che il dispositivo si sta per spegnere. Se succede, spegnerlo per 10 minuti prima di un nuovo utilizzo. PASSO 5 Prima dellutilizzo applicare un dacqua sia sul pene che allinterno della guaina. Durante lutilizzo, ogni 10 minuti, applicare altro a base NON UTILIZZARE UN LUBRIFICANTE AL SILICONE, PU DANEGGIARE IL MATERIALE DELLA GUAINA. PASSO 6 Spegnere il dispositivo prima di rimuovere la guaina. Per rimuovere la guaina, tirarla delicatamente verso lalto. Very Intelligent Ecommerce 2022 Tutti i diritti riservati. Autoblow A.I., domanda di brevetto depositata. Autoblow un marchio registrato di Very Intelligent Ecommerce, Inc. Autoblow A.I. solo un oggetto e non ha applicazioni terapeutiche o mediche. Contattateci a support@vieci.com GUIDA ALLE FUNZIONI AVANZATE L Autoblow AI+ in grado di connettersi ad Internet ed accedere ad una serie di funzionalit abilitate per il web tra cui controllo remoto, esperienze di fellatio da poter scaricare, controllo vocale (beta) ed altro ancora. Per consultare le istruzioni relative alla connessione ad Internet , inclusa una guida video, puoi visitare il sito Autoblowme.com o puoi semplicemente scansionare questo QR CODE utilizzando un telefono oppure un tablet:
COME CAMBIARE LA DIMENSIONE DELLA PRESA PER IL PENE L Autoblow AI+ dotato di una presa regolabile per il pene. Usando un cacciavite Philips, puoi regolarla tra 47 mm e 53 mm. Sui nuovi dispositivi invece, la presa impostata su 50 mm. Per regolare la presa al livello di tensione preferito, necessario rimuovere la guaina ed inserire un cacciavite attraverso il foro e nella vite Philips attaccata alla presa. Ruotare in senso antiorario per stringere la presa oppure in senso orario per allargare la presa. ATTENZIONE:
SMETTERE DI GIRARE LA VITE NON APPENA SI AVVERTE RESISTENZA. FCC ID 2A4AW-AUTOBLOW-AI Intervallo di frequenze 2.4GHz - 2.5GHz EIRP (dBm) 8.4 DICHIARAZIONE DI CONFORMIT EU Very Intelligent Ecommerce, Inc. dichiara che questo dispositivo conforme ai requisiti essenziali e ad altre disposizioni pertinenti della Direttiva 2014/53/EU. Far uscire qualsiasi liquido dallinterno della guaina e sciacquarla con acqua calda e sapone. Spruzzare un detergente per sex toy allinterno della guaina e sciacquare. Per asciugare linterno della guaina, inserire un panno di cotone o della carta assorbente da cucina attorcigliandola diverse volte per assorbire lacqua rimasta allinterno. NON CERCARE DI ROVESCIARE LA GUAINA. POTREBBE STRAPPARSI. PASSO 8 NON immergere mai lAutoblow A.I. nellacqua. Utilizzare solo esterna. Conservare il un panno umido per pulire la dispositivo in un luogo asciutto lontano da luce solare diretta. Per estendere la vita della guaina dellAutoblow e per mantenere la sua consistenza setosa, cospargere la guaina di amido di mais e conservarla in una busta di plastica. AVVERTENZA NON BLOCCARE IL SISTEMA DI VENTILAZIONE NELLA PARTE INFERIORE DEL DISPOSITIVO. QUESTO UN DISPOSITIVO ELETTRICO. NON UTILIZZARLO IN ACQUA O VICINO ALLACQUA. PU PORTARE LESIONI GRAVI FINO ALLA MORTE. QUESTO DISPOSITVO DEVE ESSERE UTILIZZATO CON UNA GUAINA AUTOBLOW A.I. NON UTILIZZARE IL PRODOTTO SENZA LA GUAINA INSERITA, PU PORTARE LESIONI. QUESTO PRODOTTO POTREBBE NON FUNZIONARE CORRETTAMENTE IN UN AMBIENTE CON SCARICHE ELETTROSTATICHE. IN TAL CASO, REIMPOSTARLO SPEGNENDO E RIACCENDENDO L'ALIMENTAZIONE. GARANZIA Autoblow garantisce le parti elettriche e il motore di Autoblow A.I. per un periodo di un (1) anno. La garanzia ha inizio dalla data di acquisto, contro difetti di produzione o materiali. La garanzia copre solo il corpo principale del dispositivo Autoblow A.I., purch non sia stato manomesso o smontato. La garanzia non copre deterioramenti estetici causati dal normale utilizzo. La garanzia inoltre non copre danni causati da incidenti, uso improprio o negligenza. Qualsiasi tentativo di aprire o smontare lAutoblow A.I. annuller la garanzia. Verbind de stroomkabel met de onderkant van de Autoblow A.I. en steek de stekker in het stopcontact (120v 240v). Het apparaat moet in het stopcontact blijven tijdens gebruik. STAP 2 Zet het STAP 3 op ON. De grip beweegt dan naar de hoogste positie. Volg de handelingen in de tekeningen om de sleeve in de grip te plaatsen. Gebruik de meegeleverde plastic stok om te helpen met het inbrengen. De sleeve zit goed als het onderste randje tot onder de grip komt, en het bovenste randje boven de grip uitkomt. DE MACHINE MOET GEBRUIKT WORDEN MET EEN SLEEVE, ANDERS KAN DIT LEIDEN TOT LETSEL. STAP 4 Druk op om de 10 verschillende modi te doorlopen. om modus 1 te activeren en druk nogmaals Elk van de 10 modi kan gebruikt worden op 10 snelheden. Klik op de knoppen om de snelheid van elke modus in te stellen. en knop om een modus te pauzeren. Druk Druk op de nogmaals op de gepauzeerd is knipperen de LEDs langzaam BLAUW. knop om verder te gaan. Als het apparaat Modi verschijnen als een blauw licht. Snelheden verschijnen als groen licht. Knipperende RODE LEDs geven aan dat de motor tijdelijk oververhit is en dat de machine zal stoppen. Zet de machine uit als dat gebeurt en wacht 10 minuten voordat je hem weer aanzet. STAP 5 Breng voor gebruik een glijmiddel op waterbasis aan op je penis en de binnenkant van de sleeve. Breng elke 10 minuten tijdens het gebruik meer glijmiddel aan. GEBRUIK GEEN GLIJMIDDEL OP SILICONENBASIS OMDAT DAT HET MATERIAAL VAN DE SLEEVE ZAL BESCHADIGEN. STAP 6 Zet de machine uit voordat je de sleeve verwijdert. Trek de sleeve zachtjes omhoog om hem uit te nemen. EU STATEMENT Very Intelligent Ecommerce, Inc. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. IC STATEMENT This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes
:(1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance. Le prsent appareil est conforme de ce matriel aux conformits ou aux limites dintensit de champ RF, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit dacqurir les informations correspondante. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B) MANUFACTURER ADDRESS:
Very Intelligent Ecommerce, Inc, 109 E. 17th St, Suite 4 Cheyenne, WY 82001 AUTHORIZED EUROPEAN UNION REPRESENTATIVE
(EU REGULATORY INQUIRIES ONLY) Alura Group BV, Kroonwiel 2, 6003 BT Weert, The Netherlands Operating temperature 0-40 degrees Celsius Sleeve material Device body material Silicone ABS If you experience pain or discomfort while using this device, stop use IMMEDIATELY. STAP 7 Giet uit de binnenkant van de sleeve en was hem met zeep en warm water. Spuit een sextoy-
reiniger in de sleeve en spoel hem dan nogmaals uit. Gebruik keukenpapier of een kleine binnenkant van de sleeve te drogen, draai dit enkele keren naar beneden om achtergebleven water op te nemen. doek om de PROBEER DE SLEEVE NIET BINNENSTEBUITEN TE KEREN. HIJ KAN SCHEUREN. STAP 8 Dompel de Autoblow A.I. NOOIT onder in water. Gebruik alleen een vochtige doek om de buitenkant te reinigen. Berg de machine op op een koele, droge plek, niet in direct zonlicht. Om ervoor te zorgen dat de sleeve van je Autoblow langer meegaat en om de zijdeachtige textuur te behouden stof je de sleeve met maiszetmeel na het reinigen en berg je de sleeve op in een afgesloten plastic zak. WAARSCHUWINGEN BLOKKEER HET VENTILATIEGAT AAN DE ONDERKANT VAN DE MACHINE NIET. DIT IS EEN ELEKTRISCH APPARAAT. GEBRUIK HET NIET IN OF BIJ WATER. LETSEL OF DOOD KUNNEN HET GEVOLG ZIJN. DIT APPARAAT MOET GEBRUIKT WORDEN MET EEN AUTOBLOW A.I. SLEEVE. PROBEER HET APPARAAT NIET TE GEBRUIKEN ZONDER SLEEVE, LETSEL KAN HET GEVOLG ZIJN. DIT PRODUCT WERKT MOGELIJK NIET GOED IN EEN OMGEVING MET ELEKTROSTATISCHE ONTLADING. RESET HET IN DAT GEVAL DOOR HET APPARAAT UIT EN VERVOLGENS WEER AAN TE ZETTEN. GARANTIE Autoblow geeft een (1) jaar garantie op de elektrische onderdelen en de motor van de Autoblow A.I. De garantie is geldig vanaf de originele aankoopdatum, op productiefouten en materialen. De garantie dekt alleen het hoofdproduct van de Autoblow A.I., op voorwaarde dat dit niet gewijzigd of uit elkaar gehaald is. De garantie heeft geen betrekking op de herbruikbare sleeve. De garantie dekt geen uiterlijke verandering veroorzaakt door normale slijtage. De garantie dekt ook geen schade veroorzaakt door ongelukken, verkeerd gebruik of nalatigheid. Elke poging om de Autoblow A.I. te openen of uit elkaar te halen zal de garantie laten vervallen. STEG 1 Anslut ntkabeln till botten av Autoblow A.I. och anslut den till ett eluttag (120v-240v). Enheten mste frbli ansluten till vgguttaget under anvndning. STEG 2 Fr reglaget till lget ON. Hllaren d till versta positionen. STEG 3 Flj anvisningarna i beskrivningen fr att stta in fodret i hllaren. Anvnd den medfljande vita plastpinnen fr att hjlpa till med infrandet av fodret. Fodret sitter ordentligt nr dess nederkant sitter under hllaren och dess vre kanter sitter ovanfr hllaren. MASKINEN SKALL ANVNDAS MED FODRET ISATT, ANNARS KAN SKADA UPPST. STEG 4 Tryck p fr att g igenom de 10 olika lgena. fr att aktivera lge 1 och tryck igen Vart och ett av de 10 lgena kan avnjutas i 10 hastigheter. Tryck p och knapparna fr att kontrollera hastigheten fr varje lge. Tryck p knappen p knappen paus blinkar lysdioderna lngsamt BLTT. en gng till fr att teruppta. Vid fr att pausa i alla lgen. Tryck Lgena visas som enskilda bl lampor. Hastigheter visas som grna lampor. Blinkande RDA lysdioder indikerar att motorn har verhettats tillflligt och enheten stannar. Om detta och vnta 10 minuter innan du frsker anvnda den igen. stng av enheten STEG 5 Du mste applicera ett vattenbaserat glidmedel bde p din penis och p insidan av fodret fre anvndning. Applicera mer glidmedel var tionde minut under anvndning. ANVND INTE SILIKONBASERAT GLIDMEDEL, EFTERSOM DET SKADAR FODRETS MATERIAL. Register your product and learn about Internet features at:
STEG 6 AutoblowMe.com Stng av enheten innan du tar bort fodret. Fr att ta bort fodret, dra det frsiktigt uppt. NL NL NL RU RU RU RU JURIDISCH Very Intelligent Ecommerce 2022 Alle Rechten Voorbehouden. Voor de Autoblow A.I. is patent aangevraagd. Autoblow is een geregistreerd handelsmerk van Very Intelligent Ecommerce, Inc. Autoblow A.I. is alleen voor je plezier, hij heeft geen therapeutische of medische toepassing. Neem contact met ons op via support@vieci.com HULP BIJ GEAVANCEERDE FUNCTIES HOE VERANDER JE DE MAAT VAN DE PENIS GRIPPER?
Je Autoblow AI+ is uitgerust met een verstelbare penis gripper. Met behulp van een Philips schroevendraaier kun je hem tussen 47mm en 53mm verstellen. Op nieuwe apparaten is de gripper ingesteld op 50mm. Om de gripper op het door jou gewenste strakheidsniveau in te stellen, kun je de sleeve verwijderen en een schroevendraaier door het gaatje en in de Philips schroef steken die aan de gripper bevestigd is. Draai tegen de klok in om de gripper strakker te maken of met de klok mee om hem losser te maken. WAARSCHUWING:
STOP MET DRAAIEN ZODRA JE WEERSTAND VOELT. HOE KRIJG JE TOEGANG TOT DE INTERNETFUNCTIES?
1 Je Autoblow AI+ kan verbinding maken met het internet en toegang krijgen tot een reeks web-functies, waaronder afstandsbediening, downloadbare pijpbeurt-ervaringen, stembediening (beta) en meer. Om de instructies voor de internetverbinding, met onder meer een video-walkthrough, te bekijken, ga je naar Autoblowme.com of scan je deze QR-code met een telefoon of tablet:
Very Intelligent Ecommerce, Inc. verklaart dat dit apparaat voldoet aan de essentile vereisten en andere relevante bepalingen van Richtlijn 2014/53/EU. Autoblow A.I.
(120-240). 2
. 3
. 4 10 . 1 , 10 10 .
. - , 10 . 5
. 10 .
. 6
. 7
. . 8 Autoblow A.I. .
, . Autoblow
. . AUTOBLOW A.I.
, . Autoblow Autoblow A.I. (1) .
. Autoblow A.I., , .
. Autoblow A.I. . Very Intelligent Ecommerce 2019 . Autoblow A.I. . Autoblow -
Very Intelligent Ecommerce. Autoblow A.I. ,
. support@vieci.com
Autoblow AI+
-) Autoblowme.com QR-
Autoblow AI+
. 47 53 ,
. 50 .
. Very Intelligent Ecommerce, Inc. , 2014/53/U. SE STEG 7 SE JURIDISK INFORMATION Hll ut eventuell vtska frn insidan av fodret och tvtta det med tvl och varmt vatten. Spraya ett rengringsmedel avsett fr sexleksaker i fodret och sklj det sedan igen. Fr att torka insidan av fodret, fr in en pappershandduk eller en liten textilhandduk och vrid den med en nedtriktad rrelse fr att se till att absorbera eventuellt vatten som kvar inuti. gnger FRSK INTE ATT VNDA FODRET UT OCH IN. DET KAN SPRICKA. STEG 8 Snk ALDRIG ner Autoblow A.I. i vatten. Anvnd en fuktig trasa fr att rengra endast utvndiga ytor. Frvara enheten p ett svalt, torrt stlle utan direkt solljus. Fr att frlnga livslngden p ditt Autoblow-foder och fr att med majsstrkelse bibehlla dess silkeslena textur, pudra efter rengring och frvara fodret i en frseglad plastpse. VARNINGAR Very Intelligent Ecommerce 2019 All Rights Reserved. Autoblow A.I. invntar patent. Autoblow r ett registrerat varumrke som tillhr Very Intelligent Ecommerce, Inc. Autoblow A.I. r endast fr rekreationsbruk och har ingen terapeutisk eller medicinsk tillmpning. Kontakta oss p support@vieci.com VGLEDNING FR AVANCERADE FUNKTIONER HUR MAN NDRAR STORLEK P PENISHLLAREN Din Autoblow AI+ r utrustad med en justerbar penishllare. Med hjlp av en kryssmejsel kan du justera den till mellan 47 mm och 53 mm. P nya enheter r hllaren instlld p 50 mm. Fr att justera hllaren till den storlek du fredrar mste du frst ta ut fodret och drefter fra in en skruvmejsel genom avsett hl och in till phillipsskruven som sitter i hllaren. Skruva moturs fr att minska omkretsen p hllaren, eller medurs fr att ka omkretsen p hllaren. BLOCKERA INTE LUFTUTLOPPET P MASKINENS UNDERDEL. VARNING:
SLUTA ATT VRIDA P SKRUVEN S SNART DU MTER MOTSTND DETTA R EN ELEKTRISK APPARAT. ANVND INTE I- ELLER NRA VATTEN. DETTA KAN LEDA TILL SKADA ELLER DDSFALL. DENNA APPARAT SKALL ANVNDAS TILLSMMANS MED ETT AUTOBLOW A.I.-FODER ANVND INTE PRODUKTEN UTAN ETT FODER, EFTERSOM SKADA D KAN UPPST. DENNA PRODUKT KAN DRABBAS AV FUNKTIONSFEL OM EN ELEKTROSTATISK URLADDNING SKER I DESS NRMILJ. SKULLE S VARA FALLET KAN FUNKTIONEN TERSTLLAS GENOM ATT STNGA AV OCH DREFTER STTA P STRMMEN IGEN. GARANTI Autoblow garanterar att de elektriska delarna och motorn i Autoblow A.I. r tckta under en period av ett (1) r. Garantin gller frn det datum d enheten frst kptes, mot defekter p grund av felaktig tillverkning eller material. Garantin tcker endast huvuddelen av Autoblow A.I.-produkten, frutsatt att den inte har manipulerats eller plockats isr. Garantin tcker inte det teranvndbara fodret. Garantin tcker inte kosmetisk frsmring som orsakats av normalt slitage. Garantin tcker inte heller skador som orsakats p.g.a. olycka, missbruk eller frsummelse. Varje frsk att ppna eller plocka isr Autoblow A.I. upphver garantin. SE SE HUR MAN FR TILLGNG TILL INTERNETAKTIVERADE FUNKTIONER Din Autoblow AI+ kan ansluta till internet och dr f tillgng till en uppsttning av webbaktiverade funktioner. Dessa funktioner inkluderar fjrrkontroll, nedladdningsbara oralsexupplevelser, rstkontrol (beta), med mera. Fr att ta del av instruktionerna angende hur man ansluter enheten till internet, inklusive en videoguide, besk AutoblowMe.com, eller skanna helt enkelt fljande QR-kod med hjlp av din mobil eller surfplatta:
Very Intelligent Ecommerce, Inc. frklarar att denna enhet verensstmmer med de vsentliga kraven och andra relevanta bestmmelser i direktiv 2014/53/EU.
1 | Label and Label Locations | ID Label/Location Info | 326.20 KiB | February 02 2023 |
35.00 mm 50.00 mm Product Name: Motorized Penis Stroking Machine With Insertable Sleeve Model: Autoblow Al+
Input: 12V == 3A Manufacturer: Very Intelligent Ecommerce Inc. 109 E. 17th St, Suite 4, Cheyenne , WY 82001 United States Importer : XXXXX Address : XXXXX FCC ID: 2A4AW-AUTOBLOW-AI-E CFEKA OE
1 | FCC Agent Authorization | Cover Letter(s) | 30.19 KiB | February 02 2023 |
VERY INTELLIGENT ECOMMERCE INC. 2022-12-16 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:
We, the undersigned, hereby authorize DongGuan Anci Electronic Technology Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Brian Sloan Manager VERY INTELLIGENT ECOMMERCE INC. 109 E, 17th St, Suite 4, Cheyenne, WY 82001, United States
1 | FCC Long Term Confidentiality Letter | Cover Letter(s) | 35.90 KiB | February 02 2023 |
VERY INTELLIGENT ECOMMERCE INC. 2022-12-16 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (EUT Name: Motorized Penis Stroking Machine With Insertable Sleeve/Model: Autoblow AI+, Autoblow AI+ Clear, Autoblow A.I. Plus, Autoblow A.I. Plus Clear, CG573 /FCC ID: 2A4AW-AUTOBLOW-AI-E) To Whom It May Concern:
This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Block Diagram ,Operational Description,Schematics) required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Brian Sloan Manager VERY INTELLIGENT ECOMMERCE INC. 109 E, 17th St, Suite 4, Cheyenne, WY 82001, United States
1 | Model Differences Letter | Attestation Statements | 409.19 KiB | February 02 2023 |
VERY INTELLIGENT ECOMMERCE INC. Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RF module and antenna, PCB layout , schematics and component. the difference is the model Numbers and enclosure type. Autoblow AI+Autoblow A.I. Plus, CG573 are Non-transparent shellOther models are transparent shells. FCC ID Trademark Model no. 2A4AW-AUTOBLOW-AI-E Autoblow AI+, Autoblow AI+
Clear, Autoblow A.I. Plus, Autoblow A.I. Plus Clear, CG573 Productio n name Motorize d Penis Stroking Machine With Insertable Sleeve Sincerely, Brian Sloan Manager VERY INTELLIGENT ECOMMERCE INC. 109 E, 17th St, Suite 4, Cheyenne, WY 82001, United States
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-02-02 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2023-02-02
|
||||
1 | Applicant's complete, legal business name |
VERY INTELLIGENT ECOMMERCE INC.
|
||||
1 | FCC Registration Number (FRN) |
0031855828
|
||||
1 | Physical Address |
109 E. 17th St, Suite 4
|
||||
1 |
Cheyenne, WY
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@metlabs.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2A4AW
|
||||
1 | Equipment Product Code |
AUTOBLOW-AI-E
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B****** S****
|
||||
1 | Title |
Manager
|
||||
1 | Telephone Number |
1-888********
|
||||
1 | Fax Number |
1-888********
|
||||
1 |
b******@vieci.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
DongGuan Anci Electronic Technology Co., Ltd.
|
||||
1 | Name |
K******** H******
|
||||
1 | Physical Address |
1-2 Floor, Building A, No. 11, Headquarters 2 Road
|
||||
1 |
Dongguan, Guangdong,, 523808
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
86-76********
|
||||
1 |
K******@anci.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Motorized Penis Stroking Machine With Insertable Sleeve | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
DongGuan Anci Electronic Technology Co., Ltd.
|
||||
1 | Name |
K******** H****
|
||||
1 | Telephone Number |
86-76********
|
||||
1 |
k******@anci.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0042000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC