FCC ID: NCI-M360-M800 AI Safety System

VIA Mobile360 M800 AI Safety System User Manual 1. Overview Reset Button Power LED Micro SD Slot Micro SIM Slot DISP Port CAN/COM Port DIO Port LAN Port 2 DMS Camera Rear Camera ADAS Camera Power/CAN Port ANT-M ANT-D Wi-Fi Antenna GPS Antenna LED indicator status description Flashing frequency Description LED Power LED On Off 1Hz 4Hz System is working System shutdown or sleep Power on / Off Firmware / MCU upgrade Remarks: 1Hz=1 flash per second, 4Hz=4 flash per second 3 SD 1.1 Specifications Item Description Processor SigmaStar SSC8629G Memory Storage Display Sensor 1GB DDR3 SDRAM 512MB SPI NAND Flash ROM 1 Segment Display (Avionic Connector) ADAS Camera:

IMX307 1/2.8 RGB CMOS, 1920*1080 FOV-D=60.8FOV-H=53FOV-V=29.8 Operation Temp -30~+70 DMS Camera:

IMX307 1/2.8 RGB CMOS, 1920*1080 FOV-D=62FOV-H=54FOV-V=30 Operation Temp -30~+70 Rear Camera:

IMX307 1/2.8 RGB CMOS, 1280*720 FOV-D=140FOV-H=109FOV-V=54 Audio Wireless Connectivity Operation Temp -30~+70 1 Speaker out (2W/4 OHM) 2 MIC 1 GPS/Beidou 1 WIFI 802.11b/g/n/ac 1 BT5.0 Mobile 360 M800 Output Power(EIRP) 5150-5250MHz WIFI :17dBm 5725-5850MHz WIFI:12dBm BT:9dBm 2.4G WIFI: 18dBm 4 1 ANT-M connector (SMA) 1 ANT-D connector (SMA) 1 GPS/Beidou ANT connector (SMA) 1 WIFI/BT ANT connector (SMA) 1 MicroSD card socket 1 Micro SIM Socket 2 Digital OUT 5 Digital IN (1 for ACC/IGN detect) 1 Power LED 1 LAN 2 CAN bus (Avionic Connector) 1 RS-232 Only TX/RX, Avionic Connector) 1 Reset Key 1 URAT for Debug (Avionic Connector) G-Sensor 1 6-axis ACCELEROMETER BMI160 Power DC9-36V (Avionic Connector) Operating System Embedded Linux Dimensions 178mm x 160mm x 52.8mm Software Drive recorder SDK with Android and iOS smartphone reference apps AWS IoT, AWS SDK, AWS KVS SDK, AWS IoT Greengrass Weight 1.382Kg Environmental Specification Operating Temperature: -20~70 Operating Humidity: 0~ 95% (non-condensing) Storage Temperature: -30~70 IP67 Vibration Loading During Operation: ISO-16750-

3 Test VII compliance Shock During Operation: ISO-16750-3 Test VII compliance 5 Antenna I/O Box Contents 1 x VIA Mobile360 M800 AI Safety System 1 x Three in One Antenna 1 x M800 - DMS Camera 1 x M800 - Rear Camera 1 x M800 - ADAS Camera 1 x M12 J1939 Cable (DCIN) 6 x M2.5 Tamper Screw 1 x Wrench 1 x Seal Ring B 1 x Front Panel Cove 1 x Segment 4 x M12 Aviation Head Plastic Dust Cove 6 2. AI Safety System Installing 2.1 Insert SD Card or SIM Card The AI Safety System supports automatic video recording to a Micro SD card after startup which can be played back in the VIA Mobile360 App. To use this feature, you need to insert a Micro SD card into the Micro SD card slot on the system. And it can download maps through a 4G network which can be displayed in the VIA Mobile360 App. To use this feature you need to insert a 4G Micro SIM card into the Micro SIM card slot on system. Insert SD Card or SIM Card: When inserting a SD card or SIM card, use your fingernail to press the card into the AI Safety System. When it is fully inserted, the card will snap into the slot. To remove the card, use your fingernail to gently press the card into the AI Safety System and it will pop up, allowing you to remove it.

*Note: It supports up to 512G SD card and must be formatted into FAT32 file system. Please confirm The SIM can connect to internet. The SIM card does not support hot plug. 7 2.2 Install Camera and Antenna Connect the 3-in-1 antenna to the corresponding antenna interface of the device, and then connect the ADAS camera, DMS camera and Rear camera to CAM1, CAM2 and CAM3 interfaces of the device respectively. Connect PWR / CAN interface of device with J1939 interface of vehicle through M12 J1939 cable. Finally, install the 3-in-1 antenna, cameras to the appropriate position of the vehicle. The connection diagram is as follows:

8 2.3 Install Segment and Other Options Connect the segment to the DISP interface of the device, and fix it in the appropriate position. Then connect the other optional equipment to the device and fix it in the appropriate position. The connection diagram is as follows:

9 3. Getting Started with your AI Safety System After install the AI Safety System, you need to connect to your mobile phone to calibrate the AI function through VIA Mobile360 App first. 3.1 Connect Your System with a phone In order to connect the AI Safety System to either an Android or iOS device, installation of the official VIA Mobile360 App is required. You can scan the corresponding QR code below for your device to download and install the VIA Mobile360 App. Mobile phone system requirements: Android 5.0 or iOS 9.0 above is required. 10 Connect AI Safety System: Once the VIA Mobile360 App has been installed on your phone, open the app and follow the prompts to connect to the System's Wi-Fi named by VIA_M800_XXX in the phone's WLAN setting. The default password is 12345678 11 After connecting to the AI Safety Systems Wi-

Fi, return to the VIA Mobile360 App. When the app has established a connection with the System, the home screen will appear as in the image below

: Full screen;

: Mute audio;

: Switch camera view;

: Trip duration;

: Current vehicle speed;

: GPS signal strength;

: 4G network signal: If there is no signal or the SIM card cannot access the Internet, the map will not be displayed.

: Device Settings: Configuring the dash cam parameters;

: ADAS Calibration button (Red indicates no calibration, green indicates calibration complete)

: DMS Calibration button (Red indicates no calibration, green indicates calibration complete) For full App instructions please visit official website: TBD 12 3.2 Segment Display When the AI Safety System detect AI alerts, the speaker on segment will play alert audio and the leds will indicate at the same time. 14 Note Hereby, VIA Technologies,Inc. declares that the radio equipment type Mobile360 M800 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.viatech.com.cn This device may be operated in all member states of the EU. Do not expose your device to extreme temperatures lower than - 20C and higher than + 70C. The product shall only be connected to a DC power supply source with output voltage higher than 9V and lower than 36V. This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Restrictions in the 5 GHz band According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic

(CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece

(EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia

(LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), the United Kingdom (UK), Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI). The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. 15 FCC Caution. 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. 16 This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withminimum distance 20cm between the radiator & your body. 17

VIA Technologies,|nc. RRB (VAY) BRA RESTO AIRAA Sa Al Safety System/22S 702228 tim/ EB FBS itaas?

Model/#!5 /#258 : Mobile360 M800 Power Input/4ai\ /S81 : 9 ~ 36Va=23A FCC ID : NCI-M360-M800 ame EET ATL SN: GA100J100001 ef a MAC: 001FF214201A gy S Made in China Ror?

x RoHS Aa piS/SSH pe

@29S 2) ONeNem

VIA Technologies Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2021/06/03 Subject; Request for Confidentiality FCC ID: NCI-M360-M800 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description NII Software Security In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Mirror Hu Title: Engineer

RF_160, Issue 03 Zhangshuangwen. (1) CCIC-SET. Electronic Testing Building, No. 43 Shahe Road, Xili Street,Nanshan District, Shenzhen, Guangdong, China.. Declaration of Authorization We Name:

Address:

City:

Country:

Declare that:

Name Representative of agent:

Agent Company name:

Address:

NEW TAIPEI CITY 231 VIA TECHNOLOGIES, INC. 8F., NO.535, CHUNG CHEN RD., XINDIAN DIST., TAIWAN (R.O.C.). City:

Country is authorized to apply for Certification of the following product(s):

Product description: AI Safety System . Type designation: Mobile360 M800. Trademark:

on our behalf. Date:

City:

Name:

Mirror Hu.. (2) NEW TAIPEI .. 2021/06/03.. VIA . Manager. Function:

Signature:

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.